Losi dbxl 2.0 petrol WARNING
Ойын-сауық
Donate To Great Ormond Street Hospital for Kids www.gosh.org/donate/
Get Your Merch Here! teespring.com/stores/kevs-merch
My Main Channel - / @kevintalbottv
My Instagram - / talbotkev
My Facebook - / kevintalbotvideos
My Business Channel - / @kevtalbot5356
📕The Traits & Habits the Successful have - kevtalbot.clickfunnels.com/75...
📕 Kev's 11 step eBay Blueprint (FULL Course) - kevin-talbot.teachable.com/p/...
Kev's RC Basher School - kevin-talbot.teachable.com/p/...
Mike Cradock's RC Master Class kevin-talbot.teachable.com/p/...
free MINI eBay Course + Tips - kevtalbot.com/ebay42/
Tools
Power Tool Tips www.banggood.com/RJX-4pcs-Met...
Better power tool tips
Hand Allen Drivers www.banggood.com/JINHUI-1_52_...
Soldering Iron
www.banggood.com/SQ-D60-60W-D...
GPS Speed Meters
SKY RC Standalone www.banggood.com/SKYRC-GSM-01...
Dynamite Standalone
Phone App Meter www.banggood.com/SKYRC-GSM020...
Пікірлер: 151
I had to fill a tank hole and just used a self tapping screw and PTFE tape it's still not leaking after 3 years on my 52cc weedwacker, I've never used a Losi. Great show
Can't be too careful against fire. I've had a petrol fire in my race car shop and it was an absolute nightmare. I'm glad you noticed this and warned people. Totally not over reacting.
This video scrambled a business meeting and lessons were learned
Heyyyy for the fuel tank hole, people should use GASKET MAKER for gas and oil. There are sealers for fuel applications.
At first I was thinking it might be to vent the tank. I'd put a fitting on it with some coiled fuel line. Will still allow it to vent and help keep fuel from leaking out in hard acceleration and roll overs. We use the trick on a real drag car and doesn't leak. Hope that helps.
Your channel is the best just started RC ing and you make it so fun great job Cheers.
@chriscottell6854
Жыл бұрын
Its exactly what rc's r all bout. Fun n finding out how to take apart, fix n rebuild n get bk to driving flat out. 😁
I think the safest thing to do would be to put a drain petcock on it. It would help drain the fuel when you finish each time.
Just bought the same one a week ago!! going to put it on road hopefully tomorrow and rip it :) thanks for the videos always love them!!
Hey Kev if it starts leaking again you can get a pressure fit Barb fitting in the hole and cap it off and that should work
always fun to chat about whats going on
Kev look into JB weld products,great for field fixing also
I’m surprised you don’t have a Losi WRC Mini. Too bad they stopped producing them.
In America we have a product called JB Weld. It comes in various forms now when it use to come in just one. They have a kind that you squeeze out of the tube and it is in a two-part mix like your two-part epoxy you were using. They also have a two part putty type that has a center color and then the outer color is different and you cut the amount you need and you knead it together in your hands until it gets warm and well mixed then you apply it. It comes in a form for metals and other items and a new product they have had for a while is for Plastics that you cut what you need and also knead it together and apply it and then it dries really hard. You then sand it to your liking and if you like you can paint it. You've got to be careful with anything you use because you have to make sure that it will stand up to different kinds of fuel because some products will eat away pretty quickly While others may take a little longer. I hope you're fix did the trick. Maybe you should contact the company and tell them what you found and ask other people to do the same otherwise they will think it's just a one-off situation which it could be but this kind of thing as you know and have said will start fires and you could crank your machine up for the very first time and take off with it and watch it burn up because you didn't have a way to extinguish it at the time which it is a good idea if you're running lipos or frankly any kind of RC to have extinguishers handy just in case otherwise it could cause a fire in a field or any other place. The JB Weld by the way dries hard as Steel and I think it's a terrific product.
yup, same problem. did the exact same thing to fix it yesterday.
Love the waffling 😂 good conversations
I used a washer and super glue to secure the washer and used a screw larger then the hole and haven't leaked since. Just need to get a diff locker for center diff blew it apart last night lol
Hello Kevin I have the same car and my gas tank also had a leak but the hole was not that big. I repaired it with a soldering gun with the spoon tip to plastic weld it.The repair did work and hasn't leaked at all sense melting it together.
@muskokamike127
Жыл бұрын
I JUST said to plastic weld it. The spoon though is poly styrene, the better solution would be to use a laundry detergent bottle or something else made of polyethylene but if it works it works right?
@muskokamike127
Жыл бұрын
@@Berm_Blaster ah I misunderstood.
I saw this video the next day I bought a DBXL with the same problem rc store is ordering me a new fuel tanks thanks for posting this video
Kev for failsafe on nitro vehicles you need to use a different receiver for dumborc. X6F receivers does bot support nitro rc. You need to use X6YC or X6YCG dumborc receiver for nitro models. They support failsafe on ch1 and ch2.
Do repairs for my lhs, have had 2 of these tanks with the hole and also the rubber mount inserts missing. Horizon knows and sent replacement tanks for both that are fine and also includes the rubber mounts.
i got the same problem i just used a plastic welding gun that work very well
Hi kev , I love your video's. I subscribed about 9 months ago. I've since brought a traxxas maxx v2, I'm in new Zealand and there's not a lot of parts available here as yet. I'm not a hard basher but what parts are the most likely to fail first ? I'm thinking I should order some spares but I'm new to rc and dont really know where to started Any advice would be much appreciated. Cheers ,
The new tank they send you is exactly the same with glue in the hole not sure what they need to do to fix that
@jennc8554
Жыл бұрын
I know right they sent me a tank with same issue I ran it and it also leaked unbelievable.
Thanks for the awesome content..I can't wait for the new vids coming to main channel ..
New job idea for Kev. Motivational speaker.
Best RC content on here 🤙🏻
Game over rc truck in the works? Made to your toughness spec Kev?
Having this problem right now. I’m interested to see how horizon hobbies handles this. The tanks are currently in backorder
Same thing happened to my gas tank ! What could i replace it with ??
I had looking into getting a DBXL 2.0 after my 5ive-T but these issues you found and it drove me away from getting one. To me Losi either need to recall these cars or discontinue these and bring back the TLR 5ive-B kit.
Been thinking about getting the Red Cat Kaiju... Would you want to review it? its 1/8th scale and brushless 6s
Can you recommend a good upgrade steering servo for hpi savage x
Theres a hole in the gas tank dear kevin dear kevin a hole
@andrewhannam2628
Жыл бұрын
Well fix it dear losi dear losi fix it
Hey Kevin, epoxy can flash up on outside. Happen to me. You might want to drain patrol next time you fix a gastank hole.
Hi Kev, love the video's mate keep up the good work. I'm thinking of getting my first rc basher car do I go nitro or battery?
@Dos_Rc
Жыл бұрын
Go lipo nitro is very finiki messing with the needles running rich or to lean ect
@jay82bob
Жыл бұрын
deez is right. lipo are faster cleaner easier to maintain especially as you are new to r.c. good luck!
@justincoleman9776
Жыл бұрын
I concur, petrol/gas is a pain in the a$$. The only thing you need to be careful about is not using more Ss than your system can handle. LiPo is the best but NiMH can save you some money. They also don't tend to catch fire nearly as often
is the hole for a bleeding tap to empty the tank that wasn’t fitted by losi?
I never leave fuel in them and oil motor before storage
I’m on my second losi tank. Both leak from the same hole
Had to do the same thing with mine. It is thin there from the molding process. It is where the plastic runner meets the tank when it is made. With gas left inside it caused the tank to expand, it finds the weakest spot and will blow that hole open. I just put a small o right g on a screw and tighten it down hasn't leaked in months now.
@muskokamike127
Жыл бұрын
Yeah those tanks are made via blow molding. They put a rough "tube" into the mold and inject hot air in and it expands to fill the hollow mold. That's the point where they hold the blank and inject the hot air. They usually twist the plastic and leave a blob over the injection point. Looks like there process was a failure. It's the same way they make gas cans and detergent bottles and all sorts of "containers". When I worked in the plastics industry I asked "why don't they just use the opening where the gas comes out or the vent"? Shut up and get back to work! lol
@lnskustoms6795
Жыл бұрын
@@muskokamike127 yep was in the injection molding business for awhile dealing with the same crap as a machine setup tech
@muskokamike127
Жыл бұрын
@@lnskustoms6795 Yeah, setup and monitoring is key. Seems they failed bigtime on the monitoring part if many people are experiencing the same issue. I do cnc work now and if I have to make more than one part, like dozens, I always verify that the 12th is the same as the first. Anything can happen to cause them to be off.
@lnskustoms6795
Жыл бұрын
@@muskokamike127 yep run cnc lasers and mill,lathe now.
Can you pls do a review on tram as trx4-m when it comes out
what 2 stroke oil do you use ? does it have to be full synthetic
Hey Kevin you get the Traxxas XRT?
I just bought this rc truck but I need a little help tuning it any suggestions
Screw with o-ring should do it
I had the DVLXE 2.0 lightbulb battery all the way I burned my shed down with that nitro
I watch all ur videos Kevin I like them all n I love the fact that your honest with your rc car opinion thanks for being so honest and respectful to us as watchers
When I walk to the shops. I usually take Gandalf the Pink Galah on my shoulder. It takes at least 30 minutes longer because people LOVE 💑 Gandalf the Pink Galah 💗 and want photos and to talk... So yeah it gets annoying... but it's also a lot of Fun. 👍
kev are you going to get the new traxxas XRT
How do you adjust the carb?
What a needed upgrade for. The mini max
Wish they had a roller 5t or an electric version.
U could make a video sawing wood and we would watch it lol
22:14 you pronounced my name right :)
Air has to go ln the gas tank or the car wheel stop runing.
samething with mine but i metled the hole closed and ir worked
I’m willing to bet the hole was intended for a low mount fuel pickup on another model.
@robertruiz5417
Жыл бұрын
Absolutely thought the same
A hole in the bottom of the file tank really?!WTH
Use Teflon tape and a tapered thread pipe plug. Silicon and epoxy will get eaten up by the fuel. The plastic used in the Teflon tape is fuel and oil safe. 👍👍
Mine didn't come like that thank god
Great vids mate I came across your channel by accident when I was looking for how to upgrade my ftx carnage nitro and now I'm watching every vid you have done cos you're a proper entertainer and also as a beginner I'm learning loads from you, so many thanks... it's so much fun tearing about like a nutcase lol yeah mc donalds is my go to place when I can't go loo, 1 burger and that clears me out lol. Love it how you're so good to your viewers and honest reviews. You look like you have such a great and fun life with all the toys and the other massive toy you have I'm really jealous lol no honestly you seem like a great fella so really deserve it and I wish you and all people you know good karma. Keep up the great work and if you have any tips for the carnage nt that'd be awesome. Anyway enough typing I'm off to check more of your vids!!
shoulda been a recall on them tanks they recall everything else
You should sand it to make the epoxy stick better.
Mines an e,and doesn't seem to leak anything?!
can you bye this lossi in elektric version
What is your ebay shop called?
Sell the lambo, that will get you a good house. 🤣
Screw a fitting into it and put a piece of fuel line on it with a zip tie. If it’s a vent the tank will still vent.
@alanmeyers3957
Жыл бұрын
It’s in the bottom of the tank and the caps are what is vented on these
Hey can u help me with a nitro red cat shockwave what can I do to it make it faster
The problem is they replaced tank with one with the same damn issue! 2 tanks in and 2 leaks same spot🤦🏼♀️
Which ones are faster the gas ones or the electric 2 Fast 2 Furious.!!!💯💯🔥🔥💥💥
Lov you kev Steve from Australia
Just so you know you have 1.2k likes at this point M.O.G you rule!
That should work
That’s crazy why not just use the same tank from the Losi 5t
I would be pissed absolutely unacceptable!!! 🔥🔥Hazard
Kevin you need to get the new Traxxas XRT
0:20 waffle along ... LOL
what is the right or left of the car,, Drivers side or other but USA ROADS LOL
Love from Sri Lanka
When are you gonna get back to this car...🤷♂️ or have you..
Traxxas Max all the way Hell yeah I got 10 of them and I only work on the hardware. I would really love to know how to work on the software and ESC but my dyslexia slows me down help me out Kev.
Same people that say your waffling on are probably too young to understand or owe money for things they shouldn’t an have a poor standard or living themselfs not talking down on anyone but geez the man’s just trying to give some honest very good advice that should be a tool of education and not thought of that he’s just rambling on. Respect for that kev some people need to hear it from the people they idol or look up to cause it’s a great way to give others the understanding of how to live happier an have a better life ❤️🤘🏽
@andys3889
Жыл бұрын
love this car somuch
@andys3889
Жыл бұрын
good job Kev with all your videos
@andys3889
Жыл бұрын
this is so true
@andys3889
Жыл бұрын
this is so true bro
That hole may be for running some tubing from the exhaust to pressurize the fuel tank
It’s for low fuel telemetry! Lol
Dave in the House from usa nice
@DavidHernandez-mf4ek
Жыл бұрын
Dave in the house USA learn tons from u thank u
Since horizon hobby bought couple of brands they started to make poor quality product .
What is your favorite Rc number 1
Aybe the fuel line can be ran in the bottom hole
Mine doesn't have a hole, it's perfect.
It takes 12 to 16 hours to dry kev
Put the drain hole there 🧐
It's not on
I love your Channel
1:51:39 is the SpongeBob question.
The DBXL didn't start as a Losi. I think it was a Redcat (not 100%) but definitely not a Losi.
By the sound of it Kev might be better to just buy a cheap bit of land in the middle of nowhere and build a worship and cabin and race track to custom spec . Sounds like he was talking about at least million pound or 2 house with those interest payments!
🤣 McDonald's pink slime also 🥚
Put a rubber plug in it..
I love your videos
Hi Kev😊