Awesome design, the suspension and tracks seem to hold up quite well.

8 Motors and 4 buwizz!!! That must be expensive..

@CombraStudios

3 жыл бұрын

4 buwizzes cost 432 USD now and a buggy usually costs 71 USD on Bricklink so 1000 USD

@finnjfredriksz3163

3 жыл бұрын

Plus the other parts

@kimdoyeon9281

3 жыл бұрын

Plus time to make

@sentrymaker

3 жыл бұрын

so around $1300 USD and 12 hours of your soul(time to build and design)

@yuvallegomotorized

2 жыл бұрын

@@sentrymaker looks like max ripsaw stronger then mine, but mine cost 65-70$ and much much lighter, maybe 1/5 of weight.

Amazing performance and good design with 2 RC motors on each side of the drive wheel!

"It can pull any lego set with ease... " Lego 42055; is this a joke??

@marxpeklegotechnicdesign3

3 жыл бұрын

Late to the party, but: My 42055 was in pieces, else i would have done it. I am sure it is no problem at all 😁

@UltimateLegoProductions123

3 жыл бұрын

@@marxpeklegotechnicdesign3 42100 is this a joke?

@PoweredUP_

2 жыл бұрын

@@UltimateLegoProductions123 it is not MUCH more weighty. 42055 has lots of parts. And 42100 has big gap inside, but more electric. So, it is almost equal.

@marxpeklegotechnicdesign3

2 жыл бұрын

@@yuvallegomotorized yours looks very fun to drive! How is it powered?

@yuvallegomotorized

2 жыл бұрын

@@marxpeklegotechnicdesign3 Hi. Thanks a lot first. 7.4 lipo 2200 Mamp With only 2 motors, with 7.4v it was realy little hit doring stress, realy little, far from melt point, but with those 4 its never hit at all. I split each battery to 2 ir recievers, and use 2 battery's. But ill changed it meanwhile for 1 battery that split to 4- thanks to your relay clip that gave me confidence and vision to do that. Soon it will be with 6 motors 🤪🔥

instructions, please! its so cool, i want to drive it!

Great build! Surprisingly resilient, as well!

Good your tank is very speet👍👍👍

Crazy power! Nice vid!

I'M ALWAYS STUNNED BY THE POWER AND SPPEED OF THESE BUGGY MOTORS... COULD YOU PLZ USE BUWIZZ MOTORS ON THIS PROJECT?

That performance is awesome!

Absolutely awesome !! Soooo powerful ! You must be billionaire with this buwizz and buggy motors ;)

@marxpeklegotechnicdesign3

4 жыл бұрын

Thanks! But if i was a billionaire i'd be driving the real thing 😉

Breathtaking! I like it!

SUPPPAAAAA CREATIVE DESIGN, THE BEST ONE I RATE..... I ALWAYS WANTED A RC VEHICLE THAT WAS LIKE YOURS!!!:)

Now this should be a set...

Know i know why I can’t find any buggy motors on bricklink

@ItsHonski

3 жыл бұрын

There are now, But they’re like 50 bucks

@tittiesprinklesNZ

3 жыл бұрын

buwizz is making them now, ships end of next month

Good job man!

Amazing build! That thing is better than some real RC cars, and the ingenuity that went into it is insane! My only complaint: "It can pull any LEGO set with ease" My thoughts: "The UCS Millenium Falcon"

Richtig geiles Gefährt!!

S-u-p-e-r build! Excellent mechanics. 8! Buggymotors...

@Monster-st8hb

Жыл бұрын

AND DON'T FORGET $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ ALTHOUGH IT IS A S-U-P-E-R BUILD!!!!! :)

This is so cool

Holy...that is by far the best performing offroad moc I have ever seen and I have seen many. It completly puts them to shame...that speed!! Damn, I only got one RC motor.

@marxpeklegotechnicdesign3

4 жыл бұрын

Thanks for those words! Ps.. another beast is on the horizon 😉

@racernatorde5318

4 жыл бұрын

@@marxpeklegotechnicdesign3 Any chance that you are going to build an articulated tracked vehicle using the RCs? I am already working on something small that I want to use in the snow (if I get lucky and we get some). For this one I want to use the 5 stud wide tracks which means the space beetween them would be about 4 studs if I use some real vehicles for scale. Quite tricky to get a good drivetrain in there. But an RC would fit perfectly.

It's moving suspension is so satisfying while climbing walls

That’s an awesome build I wish I could do that

@marxpeklegotechnicdesign3

3 жыл бұрын

T(h)anks! 😉

wow!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! this is the best lego ripsaw on youtube!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

"How much power do we need?" "YES!"

I keep seeing this monster in my Minds Eye as a Rock Crawler...👹👍 Moving up a chimney defilement on 'slow' setting, but not stopping (except to find the best route) until it flops onto level ground at the top...

that thing is so cool

Hi marxpek, as the leader of lego tracks ( yet 😉) ill be happy if you see my last ripsaw, its a new one, didnt finish it yet, it was only first attempt to run it. I didnt even replace the battery right or full charge it. That is why i release only short clip for now, as affertiz for the feast 🥰.

@marxpeklegotechnicdesign3

2 жыл бұрын

Fun stuff, what is the powersource in it? The switches control the rc motors and the receivers control the switches, right? Works fine, but steering will be hard unless you add a subtractor.

@yuvallegomotorized

2 жыл бұрын

@@marxpeklegotechnicdesign3 hi marxpex, thank you very much for your comment 🥰. I want it run straight from the motor without friction on the plastic lego parts. You should know what i talking too, since you yourself recommended about it and i think you right with it. I built realy cool subtractor too with buggy motors and its easy to add motors to it, i just dont want all that friction to be involved. I didnt use switches, only ir recivers and 1 remote. I tried to use that "technic four by four" sistem, and i didnt like it that much - to many problem with it, specially with fake servo motor like i did it. I use lipo 7.4v 2400 mAp and put 2 of those. Very easy to see all at the end of my clip, i zoom at all even got full instruction for it on other clip. The true is that the steering and all handle with it is realy good, it drive right the path you want with easy. My house is not that big and you can see how i control it there nicly, even on slippery floor. When i have too, like in my yelow car - i prefer to use 2 remote with deferent Channels then using switch. All under less then 1kilo. I realy happy that you saw it and like it. I will develope it little more later on. I just hope you saw the 2 minutes clip and not the 30 sec one with the switch. 🙏😎

@marxpeklegotechnicdesign3

2 жыл бұрын

@@yuvallegomotorized ah you are using LiPo batteries, that explains a lot! I searched through a few of your latest videos. You have v2 receivers in it? The regular ones will hold you back. I agree about direct drive and friction from subtractors. Talking about tractors.. here is a head up especially fo you. Tractor video with even more rc motors incomming in a few minutes 😉 A little tip for your videos: hold your phone sideways while filming, keep up the good work!

@yuvallegomotorized

2 жыл бұрын

@@marxpeklegotechnicdesign3 Thanks mate. I use aliexpress recievers, the cheapest one 4.5$ with shipping. I put 6 recievers there , 1 for each motor. You right about the phone, im still new and learn it. So when we race ??? Antonio allready said he will buy tickets to both of us, to greece if his channel grow 🤪😉 Ill waiting for your new clip, you and maxbrix is my 2 favourite you tube channels by far from all others 🥰

@yuvallegomotorized

2 жыл бұрын

@@marxpeklegotechnicdesign3 Hi marx. About the steering that you mention last time, i did better clip now and its easy to see the steering performance, mostly at the end- at the drifting part. This time, i herd to you and hold the phone horizontal 😉. I Hope you enjoy it, your ripsaw inspired me the most, and allways joy to watch agian. 🥰

Im always stunned by the power of well running buggy motors! The ones i have are all crunchy and worn down 😅

@marxpeklegotechnicdesign3

4 жыл бұрын

Hehe well.. one of the 8 here started to sound bad while shooting this video as well sadly. I will check it later on. Hopefully it is serviceable.. thanks for watching!

@GTfour01

4 жыл бұрын

I'd advise trying to seep in some silicone grease.

@nadineguegan1633

3 жыл бұрын

Yes good idea I have a question: Could you make a video or some instructions when you explain they creation of the model and the problem you had during the construction of the ripsaw Please thx

That‘s the craziest LEGO vehicle ever! Are you going to build a car with the 8 Buggy motors soon? I would love to see the Performance of 8 Motors in a sturdy vehicle with wheels.

@marxpeklegotechnicdesign3

4 жыл бұрын

Thanks, i guess 😉 And i don't see any reason not too, but i do fear for the CV joints i will be needing.. do you have any suggestion for a type of vehicle?

@jumabricks

4 жыл бұрын

Marxpek Lego Technic Design Yeah, CV joints will not handle the torque. Maybe try the new ones from the 42099 Offroader. And mount the motors directly to the axle, differentials would not handle the power. I would suggest to build a vehicle like a Traxxas E-Revo or X-Maxx, just to see how close you can get to the performance of proper RC car.

@marxpeklegotechnicdesign3

4 жыл бұрын

@@jumabricks i have extras of the new cv joints but they are not easy to use with the older hubs doable but not easy. Could mount the motors directly to the rear axles but 8 would make it way too wide. I do like the rc models suggested!

@jumabricks

4 жыл бұрын

Marxpek Lego Technic Design If you make it 4 Wheel Drive there will be 4 motors per axle. That would not be too wide. But that‘s just a suggestion... Just do, whatever works the best for you! Good luck!

8 BUGGY MOTORS. WHAT ARE YOU ON

@isupalodee

4 жыл бұрын

Might try 32

Gr8! Job!!!!

A tip for when going of road whit this sick monster, is you can try placing pins in the chain so it has more grip

AMAZING

Buggy motors are SO EXPENSIVE LIKE $40 USD EACH, AND THEY GOT 8 OF THEM.

cant wait to see a lets build video 😇

Great creation you have made here, love it! One question though, how did you connect multiple Buwizz bricks to 1 controller?

@marxpeklegotechnicdesign3

2 жыл бұрын

The buwizz app allows to add multiple buwizz (up to 8) for a single MOC. On the setupscreen with all ports you will find a small buwizz icon with a + in it. That will add another buwizz to that program. Let me know if you need help!

wow.. 8 buggys 4 buwizz thats crazy cool. put them into a drag car!

ok this thing is sick ... 🤪👍

Kinda want my own now...

Absolutely incredible. I love the performance of this beast :) Well done! Dont you build with the rc-units anymore?

@marxpeklegotechnicdesign3

4 жыл бұрын

Hey man! Long time no see! How are you doing? Thanks for the nice words and.. no not really.. buwizz is soo much more useable and more importantly: faster 😉

@technicsummse2350

4 жыл бұрын

Hey, thank you, i am fine ...just really busy :) At the moment, i am testing rc-unit with 3s lipo. I think the performance is at least as good as buwizz, but i cant compare directly. I will finish a 4buggy-motor offroad chassis soon. Edit: I just uploadet 2 short videos of the current 2 motor version :)

@marxpeklegotechnicdesign3

4 жыл бұрын

@@technicsummse2350 hmm doesnt 12.4v blow up internal capacitors in the rc unit? I recal an EB thread from someone trying to use lion batterys, ending up frying the unit after a while, are you regulating the voltage?

@technicsummse2350

4 жыл бұрын

@@marxpeklegotechnicdesign3 You should check out my latest video. With 2 Motors, it works quite nice, and i used it for about 2 hours now. I dont regulate the voltage.... i am using 3 14500 cells plus 3 dummy-cells, all together like regular batteries. But i have to say, i killed 1 rc-unit while using 3 motors with 3s lipo. I think the voltage is not a problem, but the current. I think ~10A is the limit. 3 motors @ 9v consume about 9A wich worked fine for me all the time. 2 motors @ 12v consume 8A wich should be fine. But 3 motors @ 12v consume 12A.

Insane...

Cool!

OMG was für geiles Gerät 😍😍😍😍🔥 gibt es vielleicht eine Anleitung oder Teile liste ??? MfG

Epic o:

Show us the suspension more plz

*@ Marxpek Lego Technic Design* Yeah cool what I discovered here. The part goes off! Great! In any case, you have my subscription to see what there is still to discover on your channel! Logically looking forward to a visit, it is clear with all the trimmings that go with it among #Lego crazy people 😉 Ja cool was ich hier entdeckt habe. Das teil geht ja ab! Grandios! Mein ABO hast Du jedenfalls mal schauen was auf deinem Kanal es noch zu entdecken gibt! Freu mich logischerweise auf einen gegen Besuch ist ja klar mit allem Drum und dran was mit dazu gehört unter #Lego Verrückten 😉

@marxpeklegotechnicdesign3

3 жыл бұрын

Thanks! I normally avoid off brand lego, but you channel is pretty good! Also subbed!

@GenialesTuning

3 жыл бұрын

@@marxpeklegotechnicdesign3 Marxpek Well, thank you very much for the compliment as well as the fact that you want to stay and have given me a subscription! Well, I dared to think outside the box to #CaDA at the very beginning. And got stuck there too. That was also because the #stones that the boys produce are really very good. If we look at my #Lego city, 98% of the #Lego bricks are built in. At the moment. Since financially I am really reaching my limits with the #Batcave. I have now placed an order at #GoBricks. The technical quality of the system stones should be very good. Well I'll see that when the pages are here. Anyway, I'm looking forward to your latest project. Because since the bell is activated I shouldn't miss it. Greetings from Lake Constance Nun vielen Herzlichen Dank für das Kompliment wie auch die Tatsache das Du bleiben möchtest und mir ein ABO geschenkt hast! Nun ich habe den den Blick über den Tellerrand zu #CaDA gewagt ganz am Anfang. Und bin dort auch hängen geblieben. Das was gerade auch deshalb weil die #Steinchen die die Jungs produzieren wirklich sehr gut sind. Schauen wir auf meine #Legostadt dann sind da zu 98% #Lego Steine verbaut. Im Moment noch. Da ich finanziell gerade mit der #Batcave ganz ehrlich an meine Grenzen stoße. Hab ich nun eine Bestellung bei #GoBricks auf gegenen. Die Qualitäts Technisch bei den System Steinen sehr gut sein sollen. Naja das werde ich dann sehen, wenn die Seiten dann hier sind. Jedenfalls bin ich gespannt auf dein neustes Projekt. Denn da die Glocke aktiviert ist sollte ich das nicht verpassen. Schöne Grüße vom #Bodensee

Hi, this Lego is so cool and I have a question. Wich Lego motors do you youse and where do do you buy this motors?

@marxpeklegotechnicdesign3

3 жыл бұрын

Hey thanks for watching! These are the 5292 motors from 2005. Very rare and expensive.. but buwizz released upgraded and cheaper versions for these. Check the link in the description!

Great

WOW👍👍👍

this is awesome! actually, i´d love to build that one too, as there is a set of 4 BuWizz and 8 Buggy-Motors... could you publish a set of detailed photos pleeeease? Winter´s ahead, and that looks like a decent challenge for my son and me.... Thank you for your great work!

@marxpeklegotechnicdesign3

4 жыл бұрын

Thanks for your continued support! I will make some good quality pictures and post them on my thread in the eurobricks forum in a few days. There is already a bit more background info and 1 or 2 more pics. I will add the link to the description in a few minutes. But: you actually own 8 buggy motors? Not a lot op people can say that😁

@lospaul3316

4 жыл бұрын

@@marxpeklegotechnicdesign3 Great!! Desperately Waiting for the link ;-)

@marxpeklegotechnicdesign3

4 жыл бұрын

@@lospaul3316 link should be in the description. But i have not added new photos yet. There aee a few tho

@marxpeklegotechnicdesign3

4 жыл бұрын

@@lospaul3316 i have made some detailed pictures. You can find them on the same link as before from the description. Let me know if you need more details!

and then here am I sitting and staring at my little tracked vehicle that the xl motor dropped dead whenever I first plugged in the power

Nice! It is really nice to see this monster run XD did you experience any problems with the spinning parts due to the sand and dirt though? Since I own a tracked racer it really just failed in the sand... Or is that just cuz it's only two m motors and not powered up? 🤔

@marxpeklegotechnicdesign3

3 жыл бұрын

Thank you! Well.. lego and sand do not really mix.. that causes friction and damage. Does your tracked racer seems to struggle with sand in between parts or just sand as a surface? Do keep in mind that this machine has roughly 16x more mechanical power with 8 of these motors..

@Marlon_J.

3 жыл бұрын

@@marxpeklegotechnicdesign3 I ran it on a really slightly sandy dirt way on the playground and it blocked both tracks and I think it affected one of the m motors permanently, like it's damaged? Idk.. I took that away and replaced it with one m motor from a SF set I bought back in time and put that "damaged" motor into the fire department plane model 😂

@yuvallegomotorized

2 жыл бұрын

@@Marlon_J. hi man You can ask any offroad biker- this sand can eat metal professional links, if just little sand go in to your car motor - 0.5 Spoon- you can say bye bye to the engine in no time. Lego plastic is nothing to sand- just keep away from it 😉

@Marlon_J.

2 жыл бұрын

@@yuvallegomotorized aight lol and yeah ik the part with the sand into an engine am learning the job of a mechanic👌🏻 but since everyone takes their tracked vehicles outside and run it everywhere I wanted to ask if I did something wrong lol

@yuvallegomotorized

2 жыл бұрын

@@Marlon_J. i think its just for the film or that you take the results it in advance, and buy spair parts

Great creation quick question, can you run a BuWizz 2.0 on ludicrous mode with 2 buggy motors attached with no problems? Or do you have to use normal or fast mode?

@marxpeklegotechnicdesign3

4 жыл бұрын

Thanks. Running 2 buggy motors off a single buwizz can give issues on lud. Disconnects happen when driving away on ludicrous, the inrush current is too high to handle. (Not just this model) This can drive in lidicrous when you "gear up to it" but i never really did it on this MOC; fast setting is crazy enough..

@UzzyT.

4 жыл бұрын

Marxpek Lego Technic Design thank you so much for the detailed reply! It’s very helpful :)

@Monster-st8hb

Жыл бұрын

@@marxpeklegotechnicdesign3 THEN CAN YOU RUN 2 BUWIZZ BUGGY MOTORS ON A SINGLE 3.0 BUWIZZ UNIT? :)

Do you have instructions for this beast

Did you lose any of these rubber pieces on tracks? Do they stay put and never fall off even on this kind of offroad? Thanks.

@marxpeklegotechnicdesign3

4 жыл бұрын

They can come off and i did lose a few. But they are better than i had hoped!

wow

Its like group b of lego

How do you avoid the battery shutting down? I just got a Buwizz and it keeps stopping and disconnecting and I don't have more than 1 motor per port. Highly annoying.

@marxpeklegotechnicdesign3

4 жыл бұрын

Avoid ludicrous with buggy motors. Also try to use power curves in the buwizz app. And always ease into the throttle, accelerating to fast results in a disconnect (overcurrent protection trips in the buwizz). The buggy motors have a huge inrush current at start, and 2 for 1 buwizz can be a problem if you need alot of torque. So the trick is to go easy at start then switch into fast or maybe even ludicrous, supported by powercurves and good throttle control. You can also try to put both motors on 1 port, you might loose some power, but it should prevent the disconnect.

@aFewBitsShort

4 жыл бұрын

Thanks. Didn't realise you could switch speed modes with powercurves

Any chance of instructions?

God Save the Overkill

So that's around $1000 for only the Buwizzezzess and the buggy motors. Nice! How does it go with half the power and motors????? 2x Buwizz and 4x buggy motor?

@marxpeklegotechnicdesign3

4 жыл бұрын

Yes it is a costly one..I havent rebuilt it with 4 motord yet. But i will later on. I have another.. even more expensive.. moc i am working on right now. It will be a good one!

Thats my kind of lego

suuuuper

Wooooh, BuWizz is awesome and your creation too ! Congrats man. Why does Lego doesnt make motors as powerful as BuWizz ?? Power Function is BORING AND SLOW

@marxpeklegotechnicdesign3

3 жыл бұрын

Thanks! But this IS powered by Lego motors. Not by buwizz ones, those arent available yet. They are from the 9V era. So your statement stays correct: PF is slow..

Hi Marxpek. Ein großes Kompliment für Deine Arbeit. Könnte ich die Bauanleitung zur Ripsaw von Dir bekommen? Das würde mich sehr freuen. Liebe Grüße Bjoern. Und bleib gesund in dieser verrückten Zeit

@marxpeklegotechnicdesign3

3 жыл бұрын

Thank you! My german isnt that great, but this i can understand! Atm i have no instructions made for it, but i will one day post a video for it. Thanks for watching and stay healthy as well!

@bjornfriedrich4242

3 жыл бұрын

Thank you @@marxpeklegotechnicdesign3

how could you destroy such a good lego set

What if he replaced the buggy motors with the buwizz buggy motors?

Please tell me you plan to sell instructions for this!!! Take my money!

How much did you cost? ,master

Awesome Build I think it's fastest I'm planning to make my version but I can't find buggy motors 😭😭👍👍

@marxpeklegotechnicdesign3

3 жыл бұрын

Thanks! Maybe consider subbing 😁 the motors can be found on bricklink and ebay. But they are expensive as always.. keep your eyes open, and soon buwizz will sell these, cheaper and more powerfull, see the link in the description.

@maxv3450

3 жыл бұрын

go on eBay and search up monster motor

Can you post an Instruktion please

Where do you buy the buggy motors ?

@marxpeklegotechnicdesign3

4 жыл бұрын

Any place i can find them.. ebay and "marktplaats" the dutch online trading place for used items.

I’d love to see an 8 motored, high geared car. It would probably break all Lego speed records and you seem to have enough experience with that sort of power.

@marxpeklegotechnicdesign3

3 жыл бұрын

I already made a speedracer with 8 motors. Broke my own speedrecord off camera. But also broke 2 buggy motors and the entire model after a crash and i decided it wasnt worth it untill someone would break my current speed records. Also : breaking your own record isnt really motivating.

@Monster-st8hb

Жыл бұрын

@@marxpeklegotechnicdesign3 LOL not SO MOTIVATING but it could be very fun to do that!

@Monster-st8hb

Жыл бұрын

@@marxpeklegotechnicdesign3 so when you used 8 buggy motors, did you also use 8 buwizz units?

@marxpeklegotechnicdesign3

Жыл бұрын

@@Monster-st8hb no just 4 were used here, fast mode worked best, ludicrous always gave issues. It all depends on the torque needed, (weight and gearing) 4 is enough for fast mode here 8 buwizz would enable ludicrous probably, but i do not own 8..

@marxpeklegotechnicdesign3

Жыл бұрын

I am sorry i though you talked about the ripsaw, bit its about the speedracer, that had 8 motors and 4 buwizz, ludicrous worked but you had to power it up very slowly or the buwizz protection tripped.

Soooop, you spent like 550 dollars om this?, btw. Can you make a muscle car that has so much Power that it pops wheelies naturly?

Wher are you buy the buggy motors?

@marxpeklegotechnicdesign3

4 жыл бұрын

On used market places, anywhere i can basically..

Hi! Tell me there is an instruction for this tank ?

@marxpeklegotechnicdesign3

3 жыл бұрын

Hey. There is not at the moment. But i might make them someday, i get a lot of requests for it while i expected not many will have the motors for it.

@jameskratzer4538

3 жыл бұрын

Marxpek Lego Technic Design I think I saw a post on BuWizz' page, they're coming out with their own buggy-style motors. Also, anyone who complains about the tank being "too fast to handle" should remember, BuWizz doesn't HAVE to run at Ludicrous Speed (it's just LOTS more fun that way - until the inevitable Splat!)...

@marxpeklegotechnicdesign3

3 жыл бұрын

@@jameskratzer4538 yes they are! I was even involved in the development 😁 just for feedback on the exteriour tho. But it should be good. I pre ordered 2 myself. Be sure to use my link if you do the same please! And stay tuned for a review/comparisson video on the new motor when they arrive!

why 4 buwizz! wouldn´t 2 buwizz be enought? can you pls explain

@marxpeklegotechnicdesign3

3 жыл бұрын

There is no way you can run 4 rc motors of a single buwizz, 2 is already pushing it. They draw too much current.

@khaem9675

3 жыл бұрын

@@marxpeklegotechnicdesign3 thx! how would 4 motors and 2 buwizz be connected

@marxpeklegotechnicdesign3

3 жыл бұрын

@@khaem9675 each buwizz has 2 buggy motors on separate ports.

@marxpeklegotechnicdesign3

3 жыл бұрын

@@khaem9675 btw this one uses 8 rc motors, not 4..

How much you build me one for

How się you connect buwizz together

@marxpeklegotechnicdesign3

Жыл бұрын

Use multiple buwizz at once? Swipe left on the buwizz app on the buwizz connectors screen

@zgredekplaygamesgame

Жыл бұрын

Will IT work with 3.0? Im thinking about buy to some project.

@marxpeklegotechnicdesign3

Жыл бұрын

@@zgredekplaygamesgame it should work the same, i have only 1 bw 3.0 myself.

Extremly expensive... I only have one buggymotor and use an v2 reciver,also a moddet Standard Batteriebox (6 liion AA sized batteries, 2paralel, this 3 parallel packs in series to get 11.1v)

Honestly: I really want to know the speed of this vehicle!

@marxpeklegotechnicdesign3

3 жыл бұрын

I never measured it. But im guessing it is a bit over 20 km/h on fast mode. Ludicrous is too unreliable, but that would do roughly 25+ if you manage to control it.

@legolas7470

3 жыл бұрын

But why has your orange Buggy with ONLY ONE buggy motor nearly the same Speed as that one with EIGHT? Cant understand that.

@marxpeklegotechnicdesign3

3 жыл бұрын

@@legolas7470 the orange one is 18 km/h right? That is geared way differently so it has less torque. That car will never be able to take the hillclimbs this does. The ripsaw is fast but it was built for torque.

@legolas7470

3 жыл бұрын

Yaa I would try to make a transmission so you can switch between speed and crawling mode. Maybe you can make another car includincg that. But the lego parts especelly the gears and axes will be very stressed I guess, have this problem even nwith the pf motors

@marxpeklegotechnicdesign3

3 жыл бұрын

@@legolas7470 wanna see a stressed axle? Check the teaser pic on the end of my waterproof buwizz video!

can i buy it somewhere?

@marxpeklegotechnicdesign3

4 жыл бұрын

This is my own creation so it is not for sale. It is possible to recreate it of course. However ordering the parts will set you back well over a thousand dollar.. and i have not made instructions for it. There are detailed pictures in the link in the description.

@littleraptor9898

4 жыл бұрын

@@marxpeklegotechnicdesign3 ok thanks :D also you know the fake lego? lepin. it copied a hell ton of MOCS. so make the instructions paid or well only send them by emails, or not publish them at all. just a tip ya know :)

@littleraptor9898

4 жыл бұрын

also this question will waste your time a LOT. i want to build mine for myself but i have only 4 functioning buggy motors. so when you will be really REALLY REALLY bored you can make a smaller replica with 4 buggy motors and send the instructions to me? you dont need to do this. only if you are going to be bored.

@marxpeklegotechnicdesign3

4 жыл бұрын

@@littleraptor9898 Hehe i am never bored.. i am working on something else atm.. but.. i will also try to make a 4 rc motor ripsaw conversion, more people have asked for it, so why not. However.. i do not know if i will find the time to make instructions for it.. but when i get bored i surely will😉

@littleraptor9898

4 жыл бұрын

@@marxpeklegotechnicdesign3 lel ok just take your time do whathever you want buddy :D

Oh, could you Imagine driving through shit, wiping out and having to reassemble? The horror.

Poor 42099😂

_I AM SPEED_

do you have instructions

@marxpeklegotechnicdesign3

3 жыл бұрын

Not yet.

@almikreis1886

3 жыл бұрын

@@marxpeklegotechnicdesign3 thanks

@almikreis1886

3 жыл бұрын

@@marxpeklegotechnicdesign3 when are the instructions ready

@marxpeklegotechnicdesign3

3 жыл бұрын

@@almikreis1886 sorry man. It will take a while. I have many projects (not just Lego, also becoming father of my third) that i prioritize. But i wont take it apart before i make instuctions for it.

@almikreis1886

3 жыл бұрын

ok

Instructions please

Supergaaf

LED’s? Seriously?

Stop, is this legal ?

@marxpeklegotechnicdesign3

3 жыл бұрын

Legal Lego yes!

Your wallet is screaming at you

@marxpeklegotechnicdesign3

3 жыл бұрын

It screamed when i drove the x-maxx moc into the wall...

instructions, please! its so cool, i want to drive it!