Normal carbs work on velocity not volume, jets need velocity to push air through, lectron needs volume to create vacuum to suck gas

@TheGardenSnake

5 жыл бұрын

🤯 ok that makes sense. WHY DID NOBODY ELSE SAY THIS?! I even spoke with Lectron on the phone. Didn’t hear anything like that. But your simple explanation 👌🏻

@matmuffin1

5 жыл бұрын

@@TheGardenSnake pretty sure I read that off there website when buying mine😂

@TheGardenSnake

5 жыл бұрын

😂

@HalfdeadRider

5 жыл бұрын

Suck air through* the down stroke on that cylinders firing cycle sucks the air fuel in (vacuum is created after the exhaust stroke), a venturi in the carburettor helps speed up the air coming in to force a bit more air and therefore fuel into the combustion chambers. The speed of the bike when moving 'can' force some more air in, but the amount depends on the setup.

@kfjfjfjewlsls

5 жыл бұрын

just gonna be the annoying guy who comments about small facts pressure(vacuum in this case) and velocity are inversely related, your statement has to have a mistake at some point. Source: en.wikipedia.org/wiki/Bernoulli%27s_principle

To show you the power of WD-40, I tore this Honda apart!

@TheGardenSnake

5 жыл бұрын

😂😂😂 too real

@HalfdeadRider

5 жыл бұрын

What product of theirs did you use? 😉

@sisimons7998

5 жыл бұрын

he's got a contract with them on the sly .

"Wife's at work right now so..." **Drops motorcycle parts in the bathtub** 😂😂😂

@dannygatland1353

5 жыл бұрын

didn't realise my joint best youtubers watched each other

@JourdonGulick

5 жыл бұрын

It works well, but...

@TheHorsepowerJunkie

5 жыл бұрын

Ive been using our bathtub as a parts cleaner for so long my wife has finally quit bitching about it. It only took 25 years.

@Alysavos-rd4tp

5 жыл бұрын

holy fuck craig is here

this XR650 is gonna be the baddest XR650 in the world.

I quit riding after my last bad crash and this the last bike channel I still watch. This is a really cool build Jake I'm stoked for you and keep up the good work.

@co8539

5 жыл бұрын

Hey me too!! And I guess chases video will do while I wait for jakes next build video... lol

Jake, the smartest thing I did when I was building my house was a had them install plumbing and a utility sink in the garage. Not a big house and only a 2 car garage but being able to fill it some and clean parts in it is awesome!!!! Beats putting stuff in the tub or the dishwasher (yeah I have done that, lol)...

@Crana

5 жыл бұрын

A 2 car garage in the UK is pretty impressive lol In the US it seems like every house has one, if not a triple or quad garage, I love it.

Here's grip install tip if you care. 2 wraps of electrical tape, sticky side towards the bars. spray down the the tape and the inside of the grip with WD-40, then, slide them into place. I double dare you to get it to slip after 20 minutes. I've had my pillow tops with hand guards installed like that for at least 5 years and I'm thinking about replacing them because they are getting smooth. Not because they move. I'm not sure what chemical reaction takes place but, they have to be cut off when changed. I've been doing it like this for 15 years. Never had any issues. Even crashing into mud and water they don't fail.

Great great great ... as a owner of the BRP, I thank you so much! So grateful for all the series, cant wait to see the beast on the road ;) Cheers from Italy.

You deserve so many more views. I hope the algorithm gods bless you soon

This is my favourite build series. So much better than that guy that just throws the parts catalogue of carbon fibre shit at every “build” he does then brags about how much money they make from yt.

Hairspray installing grips, acts as lube wet, once dry now wire needed. Easily remove later if needed.

@neilmarshall4927

5 жыл бұрын

I've used hairspray and isopropyl alcohol. Both work great

@TheHorsepowerJunkie

5 жыл бұрын

Also works great as a lubricant and adhesive when installing front/rear main seals and cam seals. Been using it forever and have never had a seal shift on me or prematurely start leaking after install.

@thepassionofthegoose5472

3 жыл бұрын

Oldschool BMX trick.

I'm super anxious to see this bike done. Can't wait. Looking really good so far fella. Nice work

It's 5AM, haven't got any sleep because of exams, should be sleeping, but I'm sitting here watching Jake talk about putting a carburetor on a bike I'd probably never even own. Worth it

I built an xr650r supermoto 4 years ago.....they are beasts! Sold it last year and did a crf450x for the electric start.

I've never been more excited to see someone else's project finished! So close!

I cant wait to see the first ride on this thing, this is by far my favorite bike build.

Love the build, just put the same grips on my BRP. An easy way to cut the end of the grips for hand guards is to put a socket on a long extension inside the grip. Put the grip on a wooden surface and smack the extension with a hammer. The socket will cut through the end of the grip with a perfect circle. Keep up the good work!

Jake i need more videos of this build series. Love u keep up the great videos man😘

Jake I wish you made more vids for YT, I miss the old days but I still watch them religiously! Keep on trucking!

Nice!! She's coming together bub. Digging it!

Cant wait to see you ride it! I love my brp!

Can't wait till we see this brp on the road, great series so far

Hey man awesome video man cant wait to see the bike build

was waiting on another build episode love the content

Who knew Jake would end up becoming like one of those "we find out how it works" tv shows with the fancy sliced-in-half demo units. *"You can see here that the fine engineering they put into this carburator leads it to always deliver superior air/fuel mixture under any condition. Truly mind blowing design. Well get back to you after these messages."*

That carb is sweet. I cant wait for first ride. Duck tape band aid always works.!!

Finally looks like it’s getting somewhere. Can’t wait 🎉

Jake. Why are you the best motovlogger

many hellos from greece dude...i like you cause the foto behind you with our history fight with 300 against all...love sparta

I love it dude!!!!

Perfect choice for the carb.

‘Daddy why is the tub soo slippery?

Just knew before you hit that kickstand it was going to split....because i fitted a XR650R stand on my CCM 644(fits straight on) and did the exact same!(Lectron on the XR650R in my workshop right now!).

Lookin great!!

The best part of my week right here bro! I fuck with your channel the long way homie.

Go ahead and take it easy!!!! Nice shirt!

jake: wife is at work right now, she will never know wife: watching jakes video............ The channel: deleted

@kinguin7

5 жыл бұрын

Jake: deleted.

Your intros never get old😂

Dude I’m so excited to see you at the SBK 2019 moto meet

That was a clever trick with the electrical tape to get the kickstand cut mark right. Very slick 👌🏻

@TheGardenSnake

5 жыл бұрын

I can probably add it again

Banger

Love it!

Honda needs to make a 650r 2.0

@soup8962

5 жыл бұрын

they still make xr650s?

@Ezz800

5 жыл бұрын

TehAngrySoup Not anymore, Honda still make the same old 650L since the 90s

@humzilla707

5 жыл бұрын

@SunzOffski absolutely, sad really considering the ktm 690 is 74 hp and gets 60 mpg

@sisimons7998

5 жыл бұрын

an aluminum framed , e-start , street legal xr400 would outsell just about anything available today , as long as it is as tough as my 03' is . aka --an affordable/reliable ktm .

@dannggokies9129

3 жыл бұрын

Yes fuel injection with app for tuning and make a supermoto version factory. Price it around 10 grand and Honda would be a super giant..

Sweet vid👌

The intro killed me

Jake, your going to like the Lectron.

Most of this series has basically been “clean it with jake” 😂 glad to see another video on the xr!!

I like how the bike is looking so far

Well definitely wish I would have seen this before I bought my tm40.

Awesome !!!!!!!!! great vid!!!!!!!!!!!!!!!!!!!!!!!!!!

Yes jake the new carb is frackin sweet!... but i noticed you wearin bxd. I wore the zombie's san Bernardino one today.. ppl at work were like wtf?! 😁😆 The bike is gonna be so sweet when it's all said n done. 🤜🤛

ahaha yes!! i legit have cleaned over 10 air boxes in my bathtub too lmao if you put some gel shaving cream down it helps keep the greasy off the tub!

Love that into 😂

Very interested to see how those carb works for you. I have basically the same bike as you did a very similar build. And I got the bike with one of those carbs on it.. I never could get it to run right.. I’m back to the stock carb now and the bike runs great.

Love the videos

Jake..... your into made me laugh way harder than it should have. Love ya man keep making shit happen.

That bike is going to be claaaassss

My jaw dropped when you ACTUALLY cut that beautiful thing in half!!! I live in the mountains and I ride my 650R at many different altitudes, and through any 6 month period I experience ~100 degree weather as well as ~0 degree weather. SEND ME A LECTRON CARB FOR MY XR650R AND WE'LL MAKE A VIDEO OF IT!

I use super 77 spray glue to put my grips on ,it helps them slide on easy and they never move

This Build is so clean lol

oh that carb is properly naughty

Love the lectron on my Yz250x

Wow, didn't know they were still around.

The Venturi on a carb is like an airplane wing with another wing upside down on top of it if that makes sense. Easy explanation. You essentially have the tops (the curved part) of 2 wings inside of the Venturi creating a low pressure condition and thus accelerating (and cooling) the air. That's how this carb works, and is why the backside of the metering rod is flat and the filter side is round. You get a low pressure area on the flat side that varies with elevation and temperature. The Lectron detects the differences in the low pressure area behind the metering rod and compensates accordingly. Hope I didn't get too nerdy lol

@TheGardenSnake

5 жыл бұрын

I love it when you talk dirty... but for real 👍

Just use the needle nose pliers to twist end of safety wire up into grip. Kinda like you are making a fishing hook. I then use end of same pliers to push it into the soft rubber. My personal favs, Progrip 714's..I put them on all my bikes. $7 a pair.

6:18 "Riding it low altitude" *raises his hand* "and high altitude" *lowers hand*

@TheGardenSnake

5 жыл бұрын

😂 🤪

nice, keep it up :D

You had me at, “misting off the entire rod.”

Jakes wife walks in babe what are you doing giving my motorcycle a bath duh 😂😂😂

No need to tie or glue those grips on, especially with that throttle tube. Use brake cleaner to help get them on, grease or oil will stay, then just wiggle the end and they'll go on just as easy, without air lines too 😉

@co8539

5 жыл бұрын

Yup exactly. I never used wire on my grips

@t.h1572

5 жыл бұрын

or hairspray.

@zach7459

5 жыл бұрын

Hairspray works good.

@rayosteen4339

5 жыл бұрын

i would no recommend brake cleaner. thats what i used to use too and some ( most) grips will actually like melt from the brake cleaner. i fucked up 2 sets in a row and havent done it since. but if you know for a fact that the grips you use can handle it, then grip and rip!

@sisimons7998

5 жыл бұрын

TRUE DAT',,, SOAKING A NEW GRIP IN HOT , HOT WATER DOES GOOD TOO , BUDDY OF MINE USES SPRAY 3M BUT BITCHES WHEN HE HAS TO REMOVE .

When I liked it had 419 likes and 0 dislikes. Never more satisfying to smash like in my life

270 likes 0 dislikes well done mate.

Your intro reminded me of my days back in nam.

God i love these damn video's

Love how the beginning was the clip of yammy noob getting wreck by a Porsche

That intro... priceless

Go ahead and take it easy 👌

We want more!

Sorry if I'm teaching anyone to suck eggs. But if you get a peice of steel tube thats a the same size as your bars then sand the outer diameter until the grip is loose enough to slide on and off with no free play, you can slip the grip over the tube and then using a mallet use the tube like a cookie cutter to remove the center material from the grip. On the throttle side perform this step then run and exact knife around the inside to open the hole a smidge. Hope this helps. Love the videos dude and very jealous.

Lectron carb for my bike is $799.00.. crazy cool but crazy expensive!

@tedcampbell231

5 жыл бұрын

Neil Noyes I hoped they had one for my kTm 690 but the ktm640 carb is $799 also. Guess I can forget about it.

You need to come to Sanger Texas

Euro bikes aren't restricted, they wouldn't put a different carb for emissions on as we don't have regulations on bikes ,we can ride anything on the road if it's registered and insured. That other carb was probably for California regs. Lots of bikes from the u.s that get imported to the UK need uncorking ...for instance there's probably 40 + states you can't register that XR especially if it's an R model as your paperwork says track use only. We have street legal trials bikes and they don't even have a saddle or headlight . Bikes looking awesome though..I'm a big XR fanboy .

@TheGardenSnake

5 жыл бұрын

It’s was for a Euro license class. I think it had to be under 34hp. There are no staged licenses in the US.

@Syntax152

5 жыл бұрын

Euro class licance is restricted to 45 hp... i dont think drz will do that even with a fcr

Just had a an ad for them on my Instagram yesterday. Weird. Haha

Lectron's are sexy and well worth the money for sure man. Build is coming along great!

Hello form Bulgaria ;)

Love your channel. Love bikes! We never see Sadie anymore. She must be a big girl by now.

Dish washers with dawn and the longest hottest setting works wonders on air boxes...

@TheGardenSnake

5 жыл бұрын

Haha 😂 I bet

@ekarchery60x27

5 жыл бұрын

Jake TheGardenSnake just make sure the wife isn’t home... they don’t like it.

Woo. He lubed more rod type things.

Would have never thought to use WD-40 as a cleaner until I seen Jake do it 👍 Used some today to clean up the engine on my Fazer, worked great. Thanks Jake !!

@TheGardenSnake

5 жыл бұрын

It works SO GOOD

@MrSureiam

5 жыл бұрын

Yeah I was really surprised. Now I need more cans of it, so I can clean everything 😆🤪

@TheGardenSnake

5 жыл бұрын

Get a spray bottle and a gallon of it. Way cheaper that way!

@MrSureiam

5 жыл бұрын

@@TheGardenSnake Thanks Jake 👍😁 Can't wait to see the Big Red Pig all back together

@neilmarshall4927

5 жыл бұрын

Dude! What year is your fazer? I have a 2009

Can you explain how a carb on a pipe works now? thanks brah

We're skeptical but hopeful the Lectron works out. 🤞

When jake put the air box in the bath tub I instantly thought of bleeping Jeep

and I thought I was the only idiot that clean the plastics in the bathtub hahaha

I'm really interested in this Lectron Carb, they're priced under what a lot of aftermarket performance carbs are. So if it works well, might have to get one

Digging the yami noob references

Come on dudeeeee! More build videos!

Best quick garage band aid is super glue.

Using a heat gun on the carb boots really helps too

Blah Blah Blah your beard is on point lol. Beard model in your future haha. Love these videos!

My grandpa always said if you don’t bleed a little on every project it wasn’t worth it 😂