Check Out These Links From Our Video Claw Grabber Tool Link amzn.to/3uAz6Hs Nikki To Walbro Video Link kzread.info/dash/bejne/paqFy6mhnKm1XbA.htmlsi=XAqaDdH_OhdB2yZu Oil Extractor Video Link kzread.info/dash/bejne/inihj8RylNCpc84.htmlsi=I9rbRUWmRNZcf-bQ

@elsmitro

Ай бұрын

If you replaced the deteriorated cap I must have missed it?

@terryharris2493

Ай бұрын

I do my gas tank with a 5/8 hose . Fill the gas tank with water then sifer it out. Just like cleaning a fish tank same concept. Works great

@williamjupp9000

Ай бұрын

1:43

That's a job well done. School can be fun if you have a good teacher. Thank you Professor T-bone.

@RaleysSmallEngines

4 ай бұрын

You are very welcome

@breannaoliver6316

3 ай бұрын

​@@RaleysSmallEngines, gracias amigo es UN excelente video,sigue ASI ..

@Mrs.T-bone

2 ай бұрын

​@@breannaoliver6316mucho gracias!

I replaced my Nikki carb with a KIPA brand on Amazon....its under $20, I cut all last season and had no problems... Just trying to help out for the folks like me who can't afford a $100 carb👍 Great channel!

I'm leaving a comment, you done real gooood!

@RaleysSmallEngines

4 ай бұрын

Thank you 😊

It's a smooth operator now T-Bone! Keep up the great work brother!

@RaleysSmallEngines

4 ай бұрын

Thank you

Good job tibon

Thank You for doing this Video. This is exactly what my Mower is doing. Now I can get it going tomorrow!

Put a new fuel tank on my LT2000 a bit ago. Original had separated at the seam and yes the gaskets was in the bottom of the tank in pieces. Also put on a fuel shut off like you have here, filter and new gaskets in the Nikki using the Kohler kit. Runs perfect now. I also remove the Ethenol from the gas for all my lawn equipment and my classic car. It is nasty stuff when left to sit between uses.

@PapaMav

Ай бұрын

Good videos!

Another good one. T Bone, a great Teacher.

GM to you Sir. Just a moment to say thank you for being so very through with your Videos. I am retired and within the last year I have begun to learn and enhance my knowledge on Repairing Small engines. You have largely been my instructor in this Interesting endeavor. Thank you for your time and sharing your knowledge with us all. 😃👌👍👏

@RaleysSmallEngines

3 ай бұрын

Thank you William. We are glad you find our videos helpful.

Nice to have you back!👍

I really enjoy watching your videos, thank you.

keep up the good work

@RaleysSmallEngines

4 ай бұрын

Will do. Thank you for watching and commenting my friend.

The experience of T-Bone shines once more…Thank you for your teachings to us back yard mechanic boys..

Great job and awesome video keep them coming my friend

Outstanding. Every movement was directed toward accomplishing the goal. Great job. Thankyou Sir.

@RaleysSmallEngines

4 ай бұрын

So nice of you. Thanks so much Walter.

Wish I found you a few days ago Nice work man!!

Nice job on the fuel delivery fix T-Bone and that dang Nikki carb!!! 🙂👍 Hey Mrs T-Bone 👋

@RaleysSmallEngines

4 ай бұрын

Thank you John. Dang Nikki carbs. LOL

@Big_Johns

4 ай бұрын

🤣 Yes sir

Your simple way of explaining is elegant sir. Thanks so much.

Another awesome video T-Bone! 👍🏻

@RaleysSmallEngines

4 ай бұрын

Thank you

Another great video T-bone!!

@RaleysSmallEngines

4 ай бұрын

Glad you enjoyed it

Wish as a kid I’d work as a helper with a T-bone in my neighborhood just to obtain the knowledge, love the videos (and the know how) thanks Capt

@RaleysSmallEngines

Ай бұрын

Thank you. Wish I had someone to pass it on to.

@83assassin

24 күн бұрын

@@RaleysSmallEngines You're passing it on to all of us, ya know? Good stuff man!

Great Video

@RaleysSmallEngines

4 ай бұрын

Thank you

T bone I was about to say I’d use a shop vac then you brought your vacuum out 😂

@RaleysSmallEngines

4 ай бұрын

😆

👍👍👍.Thank you

@RaleysSmallEngines

4 ай бұрын

You are so welcome!

Another great video Raley. Thanks

@RaleysSmallEngines

4 ай бұрын

Thank you Robin

Greetings again from the UK. To be honest I would be straight on the internet to find out how much a replacement tank was as this was far too much effort!!!! Great video again. Many thanks.

Whoo wee that was a booger bear for sure! Your knowledge and patience is something I wish I had. You are awesome and gained a new subscriber.

Another good one.

@RaleysSmallEngines

2 ай бұрын

Thank you 😊

Hello T Bone. After searching off an on for a video just like this i finally found you today! You are a great teacher and i learned a lot. I have basically the same mower, DOM 1/21 an it died in the middle of the job last fall. Briggs gives ya several books with the mower an they dont even cover my e1550e engine. I wish you, or someone like you was nearby but i can't find a repair guy to trust either. Rifht now i am push mowing mine an my 100 yr old nieghbors yard an this yezr my old body can barely do that too! So first i saved this for rewatching to better learn from you an then realized i just needed to sub an watch all your stuff. I also sent you to a buddy who will love this too.

@RaleysSmallEngines

2 ай бұрын

Thank you, I hope our videos help you out my friend.

@stratcat4450

2 ай бұрын

@@RaleysSmallEngines thank you. I'm thinkin my next stop will be the T Bone college of carburetor replacement ha ha. I dont have the gas tank fuel line problem....yet.

Love your videos T Bone. I've been watching them for quite some time now and have enjoyed every one of them. Not only are they informative but some good fun too. Cheers from the land downunder. Pete

@RaleysSmallEngines

4 ай бұрын

I appreciate that mate.

Your awesome. Thanks for the videos

Thanks for the video! My great uncle's Poulan lawn tractor that I inherited is doing the same thing and has the dirty gas tank. I've changed the oil, oil filter, and air filter. Now that I've watched your video, I feel very confident in replacing the carb and cleaning out the tank. Plan on working on it tomorrow!!

@RaleysSmallEngines

2 ай бұрын

Awesome my friend, thank you 😊

Thanks man, you ARE da man!!!

Great show

my mower is doing the same thing, so i'm going to try doing this and hope it works.

Great diagnosis and fix.

Excellent video my friend Mr. T Bone, very educational and informative, keep them coming especially as mowing season is around the horizon.

@RaleysSmallEngines

4 ай бұрын

Thank you, will do.

@rauljr9869

29 күн бұрын

@@RaleysSmallEngines Question Mr. T Bone, I have a Snapper Mfg. No: 2690578 LT2042, 42" 20 HP Hydro Drive RMO and need to replace the drive belt, I've searched the web for help and all I have found are saying the most effective way to replace is remove the steering wheel shaft. Looking to you for advice on getting this belt replaced? Any assistance would greatly be appreciated.

A good video, when the fuel tank has that much built up crud the carburetor would have some crud in it as well, I would think. An interesting and enjoyable video sir.

I m,odified my shop vac fitting to fit in the gas tank and sucked out 95% of the crap, works great.

Another great video. Thx for the info tbone

@RaleysSmallEngines

4 ай бұрын

Our pleasure!

Maybe I missed it, T, but what about replacing that deteriorated fuel cap gasket? I have adapters for my shop vac to be able to use a narrow tube to reach down inside tanks like that to vacuum out debris. I thought I was the only one who cuts up old white cotton socks for shop rags! 😂👍

@philliphall5198

Ай бұрын

It’s the easiest way to get it cleaned with a shop vacuum cleaner and one inch hose

Nice job.

Love your videos. You're a professional and very entertaining.

@RaleysSmallEngines

13 күн бұрын

Thank you

Great video

@RaleysSmallEngines

Ай бұрын

Thank you

When I get a new cap I remove the rubber gasket, it’s not going to last a year or two anyway 😊

I would probably go with 2 zip ties on that tank 🤣🤣🤣

@RaleysSmallEngines

4 ай бұрын

😆 🤣

Good deal..good job

That is so nasty glad you did a video of this issue plus sounds like it has Nikki carb on this briggs and Stratton the dry rot sounds like ethanol gas over the years unless you can ethanol free gas

Thanks!

@Mrs.T-bone

3 ай бұрын

Thank you! Hope you have a fabulous weekend 🙂

@RaleysSmallEngines

3 ай бұрын

Wow!!! Thank you Robert 😊!!

good

Another good video t bone

@RaleysSmallEngines

3 ай бұрын

Thank you 😊

Wish I lived closer I have a generator that gave me fits new spark plug and new carb filter and fuel lines still don’t run right it’s surges finally I said the heck with and bought a new one.

👍🙏

@RaleysSmallEngines

4 ай бұрын

Thank you

Mine say kapowda,kaponda,kerplunk.😂 So I put a Edelbrock 750 double pump on her. Fastest mower on the block. Ok,I lied

Honda Vtwin 1 side runs good other cylinder hard crank and runs rough and surge?

Hey, enjoyed the video. Ran into the same problem with the surging. Swapped with a new carb, same thing. I'll check the tank and fuel line tomorrow. However, I did notice you cleaned out the debris caused by the deteriorating gas cap, yet still used the same old gas cap after the cleaning.🤔 Did you clean out all the loose stuff off of the cap itself before putting it back on?? If so, sorry, I missed it. Sending a few bucks your way to show appreciation for your videos. Thanks.

T-Bone : I have a 21 Hp B & S on a rider - all of a sudden it is running at a constant high RPM when throttle is at normal "run" position. It is not surging. The rpm is constant at 4000 rpm in run position. I can back throttle off to the lowest position and it will run at around 3500. What's wrong? Thanks!

Never put the fuel shut off ahead of the filter. Duh!

My mower has the same symptoms. It's NOT the gas cap. I can get it to run again, BUT it quits after maybe 30 mins. Sometimes it lasts longer sometimes not. The fuel cap is NOT tight so there is venting.

Next Amazon order I place I'm going to use your link And I'll tell u what I ordered Is there a way for you to be able to confirm it worked

@RaleysSmallEngines

8 күн бұрын

Thank you. That would be awesome. I'm not sure, but let me know and I will look. Please keep in mind, we get 100s of comments and just can't see all of them. Thank you very much my friend

On the link for the Walbro carb why do you call it a Walbro when it lists it as Briggs and Stratton off the amazon site?

Do you have email for troubleshooting questions?

Hello t-bone.What kind of fuel filter do you use?

@RaleysSmallEngines

Ай бұрын

Thanks for commenting Mr. Jim. We most commonly use a Rotary 10352 fuel filter.

What size of fuel line do you use?

@RaleysSmallEngines

4 ай бұрын

1/4 inch

Hitchy Magoo what I tried looking that part up on Amazon no luck 🤷😱

@RaleysSmallEngines

4 ай бұрын

What part? I will attach a link. I thought I had links in description.

@Mrs.T-bone

4 ай бұрын

😂

Thanks to the crappy ass f'n Ethanol🥴

@RaleysSmallEngines

4 ай бұрын

Got that right my friend.

@philliphall5198

4 ай бұрын

Yep , it’s just to make us spend money and more money 😢😢😢

How do you know what carb to put on , where is the number

@RaleysSmallEngines

4 ай бұрын

Experience. I use the one in the video on all single cylinder Briggs engines. Link is in the description. Thanks for watching and commenting my friend.

@wesleyhathcoat1271

4 ай бұрын

wow those carbs aren't cheap

Gave you a thumbs 👍 up, but I believe you're all thumbs. Ha, but hey, that was a good video. Thanks

@RaleysSmallEngines

4 ай бұрын

Lol Thank you my friend.

I have several of them and refuse to use them

A NIKKI carb and a 15.5 Briggs are a bad combination, ALWAYS.