An rc car with this motor, is a beast.

@spencebrooks7187

6 ай бұрын

A boat would be cooler imo

@coconutmallman

6 ай бұрын

I’m saying because I don’t know, but wouldn’t an engine like this be impractical for an rc car? Seems like it would be too heavy

@just.jose.youtube

6 ай бұрын

​@@coconutmallmanit all depends on the size of RC car you build... ;)

@URsooomad8613

6 ай бұрын

​@@coconutmallman For the most part yes, but it looks small enough to fit in the Primal RC Raminator

@andrehooker3229

6 ай бұрын

I was thinking more like a mini go-kart for a child. That would be so epic if it was a put into a mini Ferrari F40

This sounds absolutely incredible. I would love to see a larger scale car built with this

@dhc2

6 ай бұрын

a V12 go kart would be cool

@dhc2

6 ай бұрын

no idea if itd be powerful enough though

@Rose.Of.Hizaki

6 ай бұрын

@@dhc2powerful enough for a guinea pig

@joerisimmanuel9156

5 ай бұрын

​@@dhc2its should be powerful enough to compete 50cc, because the friction and everything make this engin slow, the sound is number 1

Thanks JohnnyQ90, the fuel distribution appears to be too rich in the centre cylinders and good to a little too lean in the outer cylinders due to the very different exhaust gas temperatures. This is probably because the full volume of the intake manifolds is less than the full volume of the cylinders before they merge and go to the carburettor. The speed in the intake manifolds is also a key to perfect engine running. At max torque, 83 m/s in relation to the mean piston speed is the key. If the intake manifold is divided into several segments, such as an 83 m/s segment for idling at approx. 800^-1min and one for 1/2 max torque speed, then one for max torque and the total cross-section 83 m/s at maximum speed, and if a whole cylinder fullumen enters this group before they are grouped together to the carburettor, the exhaust gas temperature for all 12 cylinders should only differ by a few ±10°. MpG. EISENEXE Michael Fritjof Mueller

@GreenLantern814

6 ай бұрын

This sounds like an interesting and very difficult engineering challenge to solve for a typical hobbyist (I imagine the only way to solve it is to alter the intake manifold or make a new one.) It also sounds like it might be a very good reason to move to an ITB setup, as complicated as that would become.

@bartboosman953

4 ай бұрын

Indeed. Easiest way is to provide a large plenum into which 6 (or all 12) equal length trumpets enter. One butterfly at the entrance of the plenum. And fuel injection in each trumpet. This is what Ferrari did from the 456GT on for their V12s. Before that they used one carb per cylinder (6 double carbs) like most other performance engines. This motor seems a bit odd, with nice exhaust manifolds but very crude intakes. Surely the builder can improve on this. And also drastically reduce fuel consumption and see a significant increase in output!

@Imagineering100

3 ай бұрын

It will be another bit of junk from Enjomor. My v8 has turned out to be just that junk.

@user-ox7lg4tp9s

3 ай бұрын

@@Imagineering100 Noch 3 Stunden 25 bis ich Zeit habe darüber ansehlich audiativ nach zu denken. 15 Uhr 35 22.02.204

@darrellreich653

17 күн бұрын

Take a Dremel to the intake manifold.

Would love to have this in my room. V12 revving as an morning alarm lmao 😂

@TH-bj1pb

6 ай бұрын

Carbon monoxide poisoning is a life-threatening illness that happens after breathing in fumes that contain carbon monoxide. Makes you sleepy.

@Sauci55on

6 ай бұрын

Not a good alarm then I guess if it makes you sleepy

@untournevisplatquelconque5402

6 ай бұрын

If it can makes me sleepy I take it XD

@TheRealKGaming

6 ай бұрын

@@untournevisplatquelconque5402as long as it has an air filter or ventilation system, it would be a funny thing to have in your bedroom XD

@untournevisplatquelconque5402

6 ай бұрын

@@TheRealKGaming Yeah exactly, along with the v8, the i6 and the others XD

Cool stuff. Cant be the only one who misses your old handmade turbines out of tin cans and toy motors

A Lamborghini Miura RC car with this engine and one of your well crafted transmissions would be a fabulous piece of engineering. Love your work as always Johnny!

I really like the way that muffler sounds. Great video as always! Doesn't sound right to me as shown by the thermal cam and that fuel comsumption!

JohnnyQ- the way that fuel drops at idle is surreal

@BeezyKing99

6 ай бұрын

not properly tuned?

@TheRealKGaming

6 ай бұрын

@@BeezyKing99nope, its more cylinders that make that go down

Looks like the only thing left to really catch up on with these small motors is to make them fuel injection now that would be crazy

That sounds absolutely sick!

Would love to see someone fit it in a motorbike!

@menom7

6 ай бұрын

Lol. That's exactly what I was thinking! My son has a 70cc dirtbike,and I was like "OMG,having this engine in that bike would be awesome!" Lol.

@MrChanw11

6 ай бұрын

This would be the best sounding moped ever.

@DerPfoertner

6 ай бұрын

Would this engine have enough power to run it?

@menom7

6 ай бұрын

Interesting question! I'd like to know of the actual power of this engine also!@@DerPfoertner

@wildcoyote34

6 ай бұрын

@@DerPfoertner actually this engine might produce 5-7 horsepower ,, but it has loads of torque because it's a V12

3:12 Man, that chuffing! I normally only hear that on large-scale V16s, never would’ve expected such a similar tone from such different engines!

Amazing Video ! thanks for uploading!! :- )

This is engineering & craftsmanship at it's finest!

that revs up so nicely

Nice video ! It sounds awesome! It does look like it wants to rev higher though.

Love the smoothness of a V12! Looks like it's barely vibrating (looking at the fuel tank).

@yourbigfan1777

6 ай бұрын

It's just fixed on the frame

@davidc-l9174

6 ай бұрын

@@yourbigfan1777Right, and it doesn’t appear to have rubber bushings or any other type of vibration isolation. And yet the gasoline has basically no movement at all, no ripples or other signs of vibration. A V12 is pretty much perfectly balanced as far an an ICE is concerned. They’re known to be basically vibration-free.

Your motors are so beautiful, you are such a cool mechanic 👏👍👍👍👍👍 Good luck 🍀

This is amazing Nice job

Absolute fire, this is awesome

Amazing engineering !

man that sounds really good too!

Yo johnny q whats up with u? Thanks fir all the awesome stuff u make and show us!

Lovely sound!

That sound, though. The "smooth buzzsaw" sound of 12 cylinders. 👌👌

Dude, I don't know how you have the disposable income for these toys, but my god you are my hero! I would LOVE to build a RC car to fit this thing!

Beautiful engine! Curious about your background. Are you a hobbyist or a professional?

Good video!

Good sound 👌

sounds great! now i hope for a good solution to the fuel problem and maybe a diff exhaust and turbo/supercharger?

Man, that thing sure likes its gas, doesn't it?😛 I would imagine a little more base timing and leaning the idle mix out would probably help (after you get a few hours of run time on it).😉 A set of ITB's with injection would probably REALLY wake it up!😄

@dantevito1193

6 ай бұрын

EFI would be really hard to do in such a small scale, speciallly multi point EFI (required for ITBs). But a second carb would probably help, that one seems too small for a 72cc engine

@TheManLab7

6 ай бұрын

It's doesn't run on gas. It run's no petrol.

@squeezablemayonnaise8904

6 ай бұрын

@@TheManLab7”gas” is what we use to describe what you would call petrol, over here in the US.

@StanleyKubick1

6 ай бұрын

*its (it's is a contraction of it is or it has, its implies possession)

@Ole_CornPop

6 ай бұрын

​@@TheManLab7over here petrol isn't used and just means petroleum. It could be anything from jelly to plastic cups. Gas means gasoline and makes much more sense.

This thing is sick! I would love to see a set of tiny f1 style headers on it! It would probably sound crazy

I owned a v12 jaguar once ,and you could see the fuel gauge going down when you gave it some.Great car,just drank fuel like it was going out of fashion.

That thing burns fuel faster than my 3L V6 TD :D very cool

3:44 I love that startup

This setup in a mini custom kart frame with a fiber body would rock for car shows.

@SherryPM72

6 ай бұрын

Liike a viper gocart.

@iandaniel2153

4 ай бұрын

Don't forget a flywheel eh!

This is beast bro

This is a big engine!

Nice 3d printed switch mount! 👍

yes seems that those 2 cold cylinders are not firing

@ncopp4358

6 ай бұрын

They were still firing. Otherwise they wouldnt be sitting at 80 degrees. Probably some issues with the valves or the carbs are feeding too much gas.

@satansnarwhal

6 ай бұрын

It’s more likely the other 4 runners are just restricted and not flowing as well

@fyrbyrd71

6 ай бұрын

@@ncopp4358 ~75° is the temp of the coolant in the engine. Combustion temp is higher than coolant temp, 119° in other pipes. The claim made was all 12 were hitting but the example was incomplete by not showing temp during off-idle revving to confirm valve or carb irregularity. Presumption can only be made at this time.

This is the coolest thing !!!!

Big supercharger required and blow it off ❤

Those headers are soo cool. I think that the problem with uneven temperature might be caused by intake manifold.

@DH-ik1vf

6 ай бұрын

Those cylinders appear to be much cooler than the others and this would presume that they are not firing

@DjSubstain

6 ай бұрын

Yeah. They are not burning fuel.

Any RC car with this motor would be a total demon machine!!

Yes, a New Upload !! 👍👍😎🙂

That thing is huge! I’m waiting for the day when he starts using an engine hoist to move these things around

you should sell a kit of 3d printed parts pre done wiring harnesses and all that to get from just the engine and radiator and end up with a test bench like that. Include pre cut extruded aluminum, tubing, harness, switches, switch mounts, and everything needed. Idk, but right now it takes so much extra to get an already expensive thing to even work at all that it just isn't very appealing to someone who doesn't have all of the tools to make something like that easily. Great work as always. Maybe instead of a test bench kit you can make a kit to install the v12, v8, i6, i4, or v2 into an rc car with all the hardware necessary to make that happen.

If you want that screaming sound you need to make an all aluminum exhaust system and include an X-pipe. If it revs high enough it's satisfaction guaranteed

@Ole_CornPop

6 ай бұрын

*Titanium

@TheCrawdadman

3 ай бұрын

This comment needs more likes

Are there any racing series for RC cars with these engines, the Colney and Toyan v8? There needs to be one.

V12 Mercedes project would be great

Putting two 3-1 collectors before the main collector will help exhaust flow a lot. Additionally, having 2 carbs will help with fuel distribution since each carb is feeding half the engine, akin to stacked v6 engines. Finally, addressing the inconsistent exhaust manifold temp: that can be caused by fuel mixture or timing issues. Investigate the possibility of late timing in the outer cylinders and rich mixture in the center cylinders.

Its interesting how the sound characteristics of an engine block can still be heard in the mini versions... that Sounds like a V12!

Nice motor!!! You use G13 for liquid cooling?

That was music to my ears... I'm late to the party, but mom wake up! JohnnyQ90 posted a video.

I'd love to see someone retrofit a pit bike or scooter with something like this!

please consider experimenting with different exhaust manifold configurations as in Maisteer channel

Misfire on 2 cylinders from thermo camera

this one sounds so cool

That is a thing of beauty. Congratulations, much respect. Absolutely brilliant. Some (constructive criticism) thoughts: 1) Ditch the 3D printed housings - they don't do the rest of the model justice. Either step up to a better quality 3D printing process or fabricate those somehow - machined billet, welded sheet metal, molded plastic... 2) How do you KNOW those cylinders are firing? Given the "one cylinder per flange" design - I'd say they aren't. 3) It boggs on acceleration - I suspect it is running lean or timing could be adjusted. 4) You've got distributors so I assume you have spark plugs - but what is that thing you're disconnecting after start? Reminds me of a glow plug battery..... Don't let anything I've said take away from your achievement. It DOES sound great but I think it can be even smoother.

Soon we will be blessed with the choice of two V12s. what a time to be alive 😀

These are very cute and I'd love to have one! I think the carbs on these little are a bit sketchy tho.

If you look close the cold exhaust pipes are the same colour as the exhaust flange there not firing at all thats residual heat

finaly !!! this is the greatest engine ever

What is the included angle of this engine? Beautiful thank you for sharing

Now that you have v12 engines in your collection, I think it's time for a 12-into-1 exhaust collector build so we can hear a miniature recreation of the formula 1 wail

@Gordon0FreeMan

6 ай бұрын

Need to tune it to reach 12k rpm.

@matthewmondragon2074

6 ай бұрын

Yes but actually no, first of all it'll be full of petrolhead comments about complaining V12 F1 cars trashing the current because sound and no to the perfomance

@darrellreich653

17 күн бұрын

Properly tuned it seems like it could potentially hit 12K or close to it. Definitely something up with those two cylinders whether that could be intake fuel supply or exhaust related and we didn't get to see the six on the other side.

@darrellreich653

17 күн бұрын

It did not seem to have a smooth high RPM

I can't wait to see what you do with this one! Should make for a nice power plant. I'd start with some better carbs...A nice cnc'ed custom intake? It needs more volume and a better air/fuel mix distribution for sure.

I love it!

Hi Guy, this sound won't never be liké an 8 cylinder at idle. I'll Always remember this symphony with m'y dad' F100 , with 4 places in front while we were small kids.🤩🥰☺️😃

Please continue the 1/5 RC Car with the v8 engine i really want to see it.

Nice model, iam really need one to my bicycle.

Thing seems like it needs boost great video

Great videos. Would design a twin carburetor manifold. Bet that would help with mixture in each cylinder

😮 so cool 😎

Sounds exactly like a McLaren F1, good stuff

How many HP does this engine in your opinion ? In any case bravo it's super interesting (and then with a compressor over it it would be a must !)

That's beyond cool. I don't know what you do with it. An R/C car built around it is going to be nearly big enough to require registration, lol. There are street scooters that have less displacement than that thing. Heck, there are juvenile dirt bikes that are only 50 cc's. That thing is a little nuts. But still super cool.

Awesome job mate! I've noticed that most of the miniture engines I've seen and heard run, sound like they are starving for air.

You´ve got some cold exhaustpipes there... Is it firing on all cyllinders? Nice engine though!

Your exhaust setup makes it sound like an Aston Martin V12 at lower revs and a bit like ferrari's V12s at higher revs imo

Now you need a supercharger.

This would be wild in an RC speedboat.

Now that's purrin like a kitten 😂

As these get more and more advanced an ECU would be cool

Oh my goodness where did you get that hand crank pump?!

This thing NEEDS a 12-to-1 collector with equal length runners! Please make it happen somehow!

You know what'd be cool as hell? Putting a mini turbo on one of these mini engines.

Looking awesome! Not to sound like safetynick, but carbon monoxide is no joke. Especially with a thirsty motor like this one. It should not be run indoors unless it's sitting next to an open window with a shop fan blowing the exhaust outside.

Carby needs a tune, it's running extremely rich. Can tell when it runs out of fuel, the RPM speeds up as it leans out.

You've got to build a vehicle for that thing JohnnyQ. V12 go kart?

This is excellent 👍 Thermostat if too cool at pump end

A built in tach in the stand to show RPM's would be a great addition

From the looks of your thermal it looks like 2 cylinders are down on that one bank. Is that right?

You blow my mind with these builds!! You must work for NASA or Lockheed Martin… all I know is that your skills are unreal!! Are you in the states?

@overlandbyday1130

6 ай бұрын

These are kits with instructions, anyone can do it.

Getting to the size where a motorbike engine would be a good solution to generating some actual torque.

72cc v12 sound small but compared to your hand 😯

Damn I like that thermal camera. I was hoping it would be like a $50-$80 item. But $300? Ouch!

This would be so sick in a boat!

@tyronlemons5203

2 ай бұрын

Stick this engine on a rc boat

Looking at the thermal cam, looks like you have a couple cylinders not firing.

Put in 1/2 scale car must be sick

Just wait JQ until that v8/v10/v12 get bigger, from smallest V12 to massive MTU V12 engine tank😂