Fantastic - ready for some Tokyo Drift action 😎👍

Also the lights look 👀 very cool with changing colours.

@L663

5 ай бұрын

We used this car for my daughters prom a few years ago - this is when we added the lights !

Third? I have a Discovery 3 now and am in battle with the EPB, so far 5 hours in and only managed to remove 7 of the 8 screws holding the cover on 😅

@L663

5 ай бұрын

There is a reason the G4 is stuck in the workshop..... the EPB....

@roberttruman8332

5 ай бұрын

When I fix it I’ll let you know the high lights 😀

Is there a reversing camera on some of the D4 HSE’s? Fairly certain the ones on the L320 RR Sport are in its spoiler. If the same on a L319 Disco, what refitting would be required?

Loved the voice effects 😂👌

Lovely job Simon 👍👍👍👏👏⭐️⭐️⭐️⭐️

@L663

5 ай бұрын

Thanks Jimmy

Nice, but I already put the original OEM spoiler on mine. Nice kit! Keep the Disco 3 young looking 👌 Anything else you may have down the road for the Disc 3?

@L663

5 ай бұрын

We need to do the rear brake pipe video next.... we are going to use compression joints !

@landroverSV

5 ай бұрын

​@L663 will you ever offer the six piston breaks for the Disco 3 again?

Hello Simon…Good work on this as it looks neat even if it takes a bit of fiddling to get it all together. Re the possibility of the centre part catching the roof, could you modify the moulding so that it curves in slightly from the edge for say 20 cm by 2-3 mm? That might be a problem now after you have set it all up but I wonder if some tailgates might be set slightly different and not have just enough clearance? If I had a D4 I would buy it! If I had a defender I would as well! 😃😃😃Richard.

@L663

5 ай бұрын

Evening Richard - as you can see we have been busy since getting back... the spoiler was a tricky design with the washer and brake light etc but we are pleased with the final result even if it is a bit of a fiddle to fit.

1. It is possible to make a screw in the middle 2. You must immediately provide a place for the camera. 3. No need to make a hole in the lantern. You can make the hole for the tube larger.

@L663

5 ай бұрын

Good points - I like the idea of the larger washer hole for the brake light wire.

Hi, sorry to be a keyboard warrior but we didnt get the finished full on side view so I assume it looks great. Also does it whistle when on the motorway at 70mph?

@L663

5 ай бұрын

Ben has done some nice pics on the website.

Hi Simon……. Gr8 to have you back!!! Interesting video….. even if in some parts it got close to soft porn???? Regards Ian 👨‍🎤🇳🇿👍👌😂😂

Hi . Very nice but I am still awaiting Rear Tailgate LED Lightbar for Range Rover L405. ❤❤👍👍🙏🙏🇬🇧

@L663

5 ай бұрын

We need to look at this again !

The original is much better! Do you offer the six pot front breaks any longer 🤔 for the D3?

Simon when will you have Part number: RRV763-Blk back in stock. Frustrating....

@L663

5 ай бұрын

We have had a lot of quality issues with the tape on these - they are for sale on ebay 4x4clearance shop - this is our outlet shop

Boom Boom!! 💥 💥 Taco Tuesday!

That's the ugliest thing I've ever seen on a Disco. Nothing like the OG spoiler. Enjoy pulling that made in PRC tat off in 12 months and wishing you'd not drilled a hole in the high level brake light. 🤠

@L663

5 ай бұрын

Each to his own....we were trying to design something a little different to OG spoiler....the brake light needs replacing anyway - its faded and cracked. This was designed in house but yes it was made in China as UK costs were too high !