Kwikset Halo - Rehanding (Troubleshooting)
Тәжірибелік нұсқаулар және стиль
Found on Amazon: www.amazon.com/gp/product/B08...
Kwikset Halo Wifi Lock - Rehanding
1. Remove battery packet
2. Hold program button (3 seconds) while dropping battery packet in
3. Deadbolt will move back and worth
This is if your lock needs trouble shooting or the deadbolt is clicking/going in wrong direction.
Пікірлер: 155
man thanks, the deadbolt wld stop halfway or wherever it decided to stop but it never wld fully lock and protrude or fully unlock you were right, mine took about 30 seconds to rehand, it kept turning back and forth and finally fixed itself so THANKS !
If every tutorial was like this the world would be a better place
@TheSmartHomeHelper
2 жыл бұрын
Thanks Paul! I appreciate the comment!
@wellsnapyeah
2 жыл бұрын
Agreed
@MiloYellowknee
10 ай бұрын
Amen
@waltino81
9 ай бұрын
Has anyone figured out how to make it quiet?? This Thing is SO LOUD!
Thank u so much I was working on my lock for hours watching to many pointless videos you are my hero
@TheSmartHomeHelper
2 жыл бұрын
Glad I could help!! Thank you for the comment!
This combined with new batteries fixed my “jammed” error. Thx! Merry xmas
@TheSmartHomeHelper
2 жыл бұрын
Happy to hear Mike! And Happy x-mas!
Thanks man I was about to take it all apart 😢 you saved me a headache 🤕 thanks again.
@TheSmartHomeHelper
Жыл бұрын
Glad I could help!!!
this fixed my problems after 6 weeks of me wanting to toss this POS lock, lol, thank you.
@TheSmartHomeHelper
2 жыл бұрын
Hey Jay! I'm happy to help!
Worked like a charm! Thanks!
@TheSmartHomeHelper
10 ай бұрын
Great to hear! Thanks for the comment!
It worked! Thank you so much. Not sure why a properly installed lock, as we had, suddenly would “lose” its handing. Batteries, perhaps? Even though mine read 60%, I replaced them as part of the process.
@TheSmartHomeHelper
2 жыл бұрын
Could be battery sometimes weather can affect it not sure if it is really hot or cold where you are at.
Praise the Lord for this video! Thank you!
@TheSmartHomeHelper
11 ай бұрын
Thanks for the comment!
Awesome, thank you. This fixed my issue
@TheSmartHomeHelper
Жыл бұрын
Great to hear!
Worked like a charm, ty.
@TheSmartHomeHelper
2 жыл бұрын
Good to hear!
You saved my life thank you
@TheSmartHomeHelper
2 жыл бұрын
Happy to help Sam G!
You are a legend sir
@TheSmartHomeHelper
Жыл бұрын
Thank you I appreciate that comment!
Awesome, thanks for this. Great Video.
@TheSmartHomeHelper
Жыл бұрын
Thanks for comment John!
Thank you! You save my day!
@TheSmartHomeHelper
4 ай бұрын
You are welcome! Thank you for the comment appreciate you!
Fixed me issue! Thanks!
@TheSmartHomeHelper
11 ай бұрын
Glad it helped! Thanks for the comment!
Thank you soooo much!
@TheSmartHomeHelper
2 жыл бұрын
Happy to help! Thanks for watching!
Your video was helpful. Mine did not respond the same as yours. But i fiddled with it long enough i got it to work. But i couldn't offer others suggestions because it was so random.
@TheSmartHomeHelper
2 жыл бұрын
I'm glad you were able to fix it!
Lifesaver
@TheSmartHomeHelper
Жыл бұрын
Happy to help!
Perfect!!!
@TheSmartHomeHelper
2 жыл бұрын
Glad I could help Kyle!!
Dude I owe you a beer 🍺
@TheSmartHomeHelper
8 ай бұрын
Haha love this comment! Thank you
It would have been helpful to point out that the batteries in the box are usually bad. Using new batteries got me past the red light failure.
@TheSmartHomeHelper
11 ай бұрын
That is a great call the batteries tend to be bad. I'll pin your comment.
Thanks it worked for me
@TheSmartHomeHelper
Жыл бұрын
Great to hear!!
It worked for me too 😜 I was about to take it back to home depot
@TheSmartHomeHelper
2 жыл бұрын
Glad I could help!!
thank you
@TheSmartHomeHelper
3 ай бұрын
You're welcome
I just installed mine and it keeps giving me a jammed error even when the door isn't even closed. I've tried rehandling it as well and that is not the issue. I'm just going to take it back at this point. I've bought several cheaper electric locks and they all have had problems. I expected to get a better product this time by paying more but that was too optimistic.
@TheSmartHomeHelper
2 жыл бұрын
Sorry to hear that Michael. Let us know what lock you go with next and if you have any better luck!
@Unkown196
11 ай бұрын
I’m also having the same issue. After talking with tech support, it seems like this is a common issue with kwikset.
@Noswiperp
11 ай бұрын
It might be your door’s strike plate. Make sure that it aligns perfectly with enough space when closing. I had same issue, strike plate that I had on mines wasn’t wide enough and I couldn’t install the one that came with it because of metal bearer block on hinge, so I went to Home Depot and bought a new striker piece and now it works like charm, no issues.
@josequintero91
7 ай бұрын
Same issue im like 4 times into the same jammed code. And now “no wifi signal” this thing has been horrible
@shawnjohnson7724
5 ай бұрын
I had to make hole deeper so deadbolt would open completely then no jam issue.
Hi! Thanks for this! I followed the process and everything works as described but, it does not automatically lock afterwards. Any suggestions? Thanks again!
@TheSmartHomeHelper
Жыл бұрын
Hey Steven, you should be able to turn on auto lock in app kzread.info/dash/bejne/m3uL2aiDkdKye7w.html
Thanks
@TheSmartHomeHelper
6 ай бұрын
No problem
Hi mine makes two clicking noises after the lock bolt is extended. Is that normal? So the bolt must be fully extended looks like. Can we also change how far the bolt extends? Thank you!
@TheSmartHomeHelper
2 жыл бұрын
Yes to both questions. Yes there is a way to extend or shirk bolt. It is hard to explain but you would need to push down on two buttons to make it bigger or smaller.
@reedsnh
8 ай бұрын
I would love to know which two buttons and how to use them. Mine will not retract fully no matter what I try or how many times I reset or rehand it. Ready to toss it! Your video was very helpful to this point though
Mine used to close on its own when I closed the door but after I changed the batteries it no longer automatically locks when I close the door . How do I fix that ? Thanks
@TheSmartHomeHelper
2 жыл бұрын
So that would be the auto-lock feature. What type of lock do you have?
After installing new batteries ..... Motor does not retract or extend back out. Any ideas? Thanks. :-)
@TheSmartHomeHelper
3 жыл бұрын
When you click the program button does it light up at all?
I tried installing this. When I follow the process above, the unit makes the beeping sound however the bolt does not go in or out. Then when trying to lock/unlock door via the app or by entering the code, it gives a “jammed” error
@TheSmartHomeHelper
2 жыл бұрын
Hey Raveen, Are you locking and unlocking with the door open or closed? If closed it could be a door issue. For instance, sometimes you have to push or pull for the lock to align correctly. If it is showing jammed and the door is open this could be a bigger issue and you may want to do a reset/resync.
@raveendeol3806
2 жыл бұрын
@@TheSmartHomeHelper Thanks for the response. I’ve tried it with the door open and then closed. I’ve also tried to factory reset it however no luck. At this point, I might just try a different lock.
@vivianlin8265
2 жыл бұрын
@@raveendeol3806 I have same issue as yours, it works with key pad, but when I lock or unlock on my phone, it always been “jammed”
@TheSmartHomeHelper
2 жыл бұрын
Hey Raveen, I'm sorry to hear that and yes it might be a lock issue then.
@thenukerunner4906
2 жыл бұрын
This is happening to me too, using the app code. Tried it with door open and closed. Bought mine at Costco.
I’m having an issue with the lock jamming. It’s worked fine until now. The jam is not relative to the strike plate, as it jams when the door is open freely. Any ideas on how to fix it?
@TheSmartHomeHelper
2 жыл бұрын
That's always tough because most the time it is a door issue. The weather plays a factor too. Try this kzread.info/dash/bejne/m2mIprWqodydhMo.html
@TheSmartHomeHelper
2 жыл бұрын
The other thing I might do is play with the door if needed but that part can be tough when door is not playing nice.
Thank you! What of the rehanding doesn’t work correctly? My lock will not unlock all the way!
@TheSmartHomeHelper
2 ай бұрын
It's an install issue on the deadbolt when you install you can extend the deadbolt and that is what you need to do
@TheSmartHomeHelper
2 ай бұрын
kzread.info/dash/bejne/a5-Llsubpr3FhKQ.html At 30 seconds in I show how it is done
Mine doesn't fully retract after rehanding. Is there anyway to adjust it to make it retract further?
@TheSmartHomeHelper
8 ай бұрын
Do you hear clicking sound and there should be a way to extend the deadbolt during install as well. I apologize I don't have a video on that
Ours doesn’t show the numbers when we want to unlock the door .. do you think this will work?
@TheSmartHomeHelper
Жыл бұрын
This should still work if it can get power if not I would check batteries
Dear sir Thank you for your video is very useful But I have problems is when I unlock the latch can not all in? Use the key is ok Do you have this video I can watch? Thank you
@TheSmartHomeHelper
Жыл бұрын
I see, I don't have a video for that but sometimes the alignment is incorrect. The other thing I would check for is making the hole deeper. Hopefully that helps and thanks for the comment.
Thank you so much.....
@TheSmartHomeHelper
2 жыл бұрын
Thank you Shrop!!!
What should I do if it won't? It's lights up but lock not moving.
@TheSmartHomeHelper
Жыл бұрын
I would try a reset on the lock if it is not rehanding and also check batteries
What if there's one long beep that won't stop? It's been bothering me for days
@TheSmartHomeHelper
Жыл бұрын
I have seen it where to do it jammed sometimes the weather can effect the door and cause it to jam I might check to see if it is smoothly going into lock. Thanks for comment
Should this be done with the door open or closed ?
@TheSmartHomeHelper
2 жыл бұрын
I do it with the door open.
My kwikset 99390 screen wouldn’t power on. Any ideals????
@TheSmartHomeHelper
3 жыл бұрын
My first would be battery and the check to see if the powercord on the lock got unattached somehow kzread.info/dash/bejne/a5-Llsubpr3FhKQ.html
I NEED URGENT HELP PLEASE!! When opening our Kiwkset Halo, the KEY wouldn't open, the key turns all the way around (loose), it won't open or lock. the Key pad is still working though, Thank God but the KEY part of the lock must work again. What do I need to do???
@TheSmartHomeHelper
8 ай бұрын
I might go through these steps again kzread.info/dash/bejne/a5-Llsubpr3FhKQ.html
I have a kwikset lock and it suddenly flash green light and beeping every few seconds. I already change new battery but still the same. Anyone know what happened?
@TheSmartHomeHelper
Жыл бұрын
I would go ahead and try this: kzread.info/dash/bejne/iWt9j9elks2Xdpc.html I have had to reset a few of my locks when I've gotten them
Hey Man, I’ve been struggling with this lock for a month now. I can’t get it to pair with the app. I press the A button for 3 seconds or longer and my lock doesn’t respond. I’ve tried everything outside of calling them and nothing online has helped
@TheSmartHomeHelper
Ай бұрын
Have you tried a factory reset yet?
That clickin at 1:19, is that normal? Mine has it at the end of unlocking using wifi.
@TheSmartHomeHelper
2 жыл бұрын
Yes so that clicking is fine you just if you have a lot of clicking that is when it should be rehanded
Not working for me tried to do a factory reset couldn't and now try to rehand it couldn't either nothing happens just going back to my regular old key locks and avoid all this hasstle
@TheSmartHomeHelper
2 жыл бұрын
It could be a bad lock I know this is an older brand. I am sorry I can't be more help but normally these steps work. If it is not rehanding or resetting that typically means it needs to be replaced.
Doesn’t work for me, even after 20+ seconds and new batteries. The front side of the door displays purple, red, green, blue, and in between colors continuously. Does it matter if the app is open? Bluetooth enabled? Edit: Had to press it twice
@TheSmartHomeHelper
7 ай бұрын
No App does not need to be open or bluetooth. The other things I might try is a Factory Reset on the lock kzread.info/dash/bejne/iWt9j9elks2Xdpc.html
My issue now it that it won't communicate with the blue tooth .I did reset the bluetooth already
@TheSmartHomeHelper
Жыл бұрын
Do you have the option to do WIFI and sometimes I've see that issue with Brick building not sure if that is the case here.
I hate this lock. It has given me more trouble than any other lock.
@TheSmartHomeHelper
Жыл бұрын
Yes, Kwiksets can be tough part of reason I made these videos.
It keeps telling me it's not syncing. How do I sync it?
@TheSmartHomeHelper
2 жыл бұрын
Go ahead and try this kzread.info/dash/bejne/q3ikt9myhs_NgMo.html
My kwikset aura wont work at all i try rehanding batterys are new is not working and is brand new as well.
@pablosalazar8001
2 жыл бұрын
Is my second lock as well i thought the first one was bad so i took it back to lowes but this one is doing the same no lock or unlock i have spent hours and no luck if you could help
@TheSmartHomeHelper
2 жыл бұрын
Of course, are any lights turning on at all or making any noise?
@pablosalazar8001
2 жыл бұрын
@@TheSmartHomeHelper not making any noise and the red and green light is coming on.
What if the keyboard and lock button aren’t working?
@TheSmartHomeHelper
11 ай бұрын
I would check the batteries first and then I might take a look at install to make sure the cords are connecting correctly.
Whatcif the lock does not rejadle?
@TheSmartHomeHelper
Жыл бұрын
I would check batteries then would be next step
my key pad isnt working but the app works. what am i doing wrong?
@TheSmartHomeHelper
2 жыл бұрын
Hmm is it the code and will it light up?
Is this with door open or closed?
@TheSmartHomeHelper
Жыл бұрын
Door open, having it closed can cause issues.
Buenas tardes como puedo poner los codigos a mi serradura
@TheSmartHomeHelper
2 жыл бұрын
kzread.info/dash/bejne/lY16tLlugrCXm5M.html kzread.info/dash/bejne/fXuNucyccaTMcrg.html
Thx was bout to throw it in trash
@TheSmartHomeHelper
2 ай бұрын
Happy I could help!!
@sheaadams86
Ай бұрын
Mines messing up again, tryed this and now it just making clicking jam noise nonstop until i pull battery holder out
My quick set lock won't do anything
@TheSmartHomeHelper
2 жыл бұрын
I might start with the batteries especially if nothing is lighting up.
My light turns red. We did the same as your video but it didn’t work.
@TheSmartHomeHelper
3 жыл бұрын
Hey! Does it turn on its own or have issues with that? I may try factory resetting the lock to see if that helps.
@tesiamuniz
3 жыл бұрын
It won’t turn on its own either. I am not sure why it is a brand new lock. My husband checked the lock to ensure it doesn’t get stuck and if you manually turn it, it is smooth.
@TheSmartHomeHelper
3 жыл бұрын
What about the batteries on this lock do they seem to be good or may need to be replaced?
@FFAWarrior1989
3 жыл бұрын
@@TheSmartHomeHelper having the same issue. Try to rehang but it just doesn’t do anything and then I get a a couple of beeps and then the green light
@TheSmartHomeHelper
3 жыл бұрын
@@FFAWarrior1989 I might try factory reset on the lock to see if that helps
Thanku
@TheSmartHomeHelper
3 жыл бұрын
Glad I could help!
My rehand is slow the dead bolt doesn’t move at all
@TheSmartHomeHelper
5 ай бұрын
New batteries is what u need
@708107JorgeG
5 ай бұрын
Thank you I replaced with new batteries and it’s strong as ever!
Lock draws battery in two weeks
@TheSmartHomeHelper
2 жыл бұрын
I have had that happen before I would try resetting and resyncing
Mine keeps jamming
@TheSmartHomeHelper
Жыл бұрын
I might try losing screws, I've seen it where it is to tight causing it to jam. I am sorry if that does not help.
Now it won't open or close
@TheSmartHomeHelper
Ай бұрын
I might try the rehand again to see what happens!
This lock is garbage. Noisy and slow. Secondly, it begins to stick and you feel it in the tumbler. Just an ongoing mess having to always rehand and other tweeks.
@TheSmartHomeHelper
2 жыл бұрын
I’m sorry to hear that and I’ve had my fair share of issues as well. That’s big reason for the videos trying to help
@Reid6636
Жыл бұрын
This describes my problem. The lock, after 1 mo installed and working well, has begun to bind. I get error beeps when it attempts to lock itself, I can feel and have to push through the binding / resistance when using the knob inside or key outside. Rehanding failed....no green light at conclusion.