My fuel x lite failed and here is the result of the failure... #KTM390ADVENTURE #MODIFIED #POWERTRONIC Creader 3001 amzn.to/3YohzNd Ktm adapter for creader amzn.to/43TazsM
Жүктеу.....
Пікірлер: 25
@augustbrante81179 ай бұрын
After reading all the comments and today is my birthday and the 390 is what I am getting myself I will be getting a new modified ECU too. After reading all the comments it seems like this is a one-off problem which does stink! But not an overall quality control issue. Best of luck with the warranty issue almost everyone makes warranty issues hard to resolve. I have a small SW company and we stand behind our (non-moto) service 100% a 100% of the time Again best of luck and pls keep us updated w the resolution!!!
@eric88mass10 ай бұрын
This is what is stopping me from doing a pipe and this fuel controller. I think the bike is dangerously quiet and who doesn’t want a little more power. The service manager at the dealership I go to said they’re more headaches than they’re worth. Which is a shame because they do seem to offer some performance. If they could just get the stability of their product to be better.
@tusharjoshi31377 ай бұрын
I own ktm rc 390 2022 model and i had the same problem, i guess it has to something with the water. If the water goes in it's done
@teddybowker730910 ай бұрын
Fuel X issue again this product is troublesome. Keep us posted Sean. 😀
@SeanFillner
10 ай бұрын
It would be nice if powertronic would reply to me. If not, I am taking it out and dumping it in the trash.
@teddybowker7309
10 ай бұрын
I have a booster plug fitted from new no issue. 2020 model. They don’t make them for 2021 upwards. 😀
@SeanFillner
10 ай бұрын
@@teddybowker7309 you mean the resistor mod on those years?
@RonOrud
10 ай бұрын
I only had this pop up once, and it fixed itself. I am curious to see what the future brings.
@allentig6 ай бұрын
thanks! having issues with my 2023 390 adventure, with the same miles and a fuelx lite. no check engine , but its idling horrible now after running great for months. when it sputters at idle the green lights stop and turn red, then back to green and it smooths out , then repeats. Your code reader special or just an adapter on a OBD2 ( i already have an obd2 with adapter ) ? good video man, thanks!
@12kabubi10 ай бұрын
I watched your installation video (part 8) and it seems that you may have messed up the calibration before first start-up. I'm guessing you should have waited longer until the lights flashed green signalling the calibration with the ECU was complete.
@SeanFillner
10 ай бұрын
I did that although I did not film it. You can see that procedure in my other bike build series playlists. I was the one that came up with that procedure in the first place and powertronic swears you don't need to do that but I disagree with them.
@johnmichael935410 ай бұрын
Did you get it thru powerTRONIC? which straight from India?
@SeanFillner
10 ай бұрын
Yes, they finally replied and wanted me to fill out a warranty activation form on their page which is funny because I bought the product directly from them so I sent them a screenshot. Hopefully this does not turn into warranty claim "tennis", if that is the case I will find a different controller. I have purchased 3 of these units and this is the first one I have had issues with.
@virajvrooms
9 ай бұрын
@@SeanFillner Do share the feedback. Filling a warranty form is a norm here due to counterfeit and pre-owned markets. I will be sending them an email with a link to your video. Have been planning to buy one.
@SeanFillner
9 ай бұрын
@@virajvrooms already did. Check the playlist I created for this build series.
@timothyrutledge10217 ай бұрын
What code reader adapter do you need to go from obd2 to KTM?
@SeanFillner
7 ай бұрын
This one if you have a 2022 or newer amzn.to/3Q6ZXBx
@timothyrutledge1021
7 ай бұрын
@@SeanFillner thank you, I have a 2023
@SeanFillner
7 ай бұрын
@@timothyrutledge1021 it will work. I use the same one on my 2023 husqvarna norden 901
@timothyrutledge1021
7 ай бұрын
@@SeanFillner thanks!
@realzeti10 ай бұрын
I got that code every time I change my exhaust (ie removed cat, resonator etc.) but resetting the code solved the problem, and it didn’t come back. Once after river crossing the code came back, so I suspect it may not be a problem exclusive to fuelx
@SeanFillner
10 ай бұрын
Once the fuel x is removed from the o2 sensor loop the code goes away and never comes back. I tested it yesterday on a ride to work.
@thedirtyknobs10 ай бұрын
Tell them if it's not under warranty it's coming back though the window 😊
@SeanFillner
10 ай бұрын
I laughed out loud when I saw this! At this point it's not far from the truth!
Пікірлер: 25
After reading all the comments and today is my birthday and the 390 is what I am getting myself I will be getting a new modified ECU too. After reading all the comments it seems like this is a one-off problem which does stink! But not an overall quality control issue. Best of luck with the warranty issue almost everyone makes warranty issues hard to resolve. I have a small SW company and we stand behind our (non-moto) service 100% a 100% of the time Again best of luck and pls keep us updated w the resolution!!!
This is what is stopping me from doing a pipe and this fuel controller. I think the bike is dangerously quiet and who doesn’t want a little more power. The service manager at the dealership I go to said they’re more headaches than they’re worth. Which is a shame because they do seem to offer some performance. If they could just get the stability of their product to be better.
I own ktm rc 390 2022 model and i had the same problem, i guess it has to something with the water. If the water goes in it's done
Fuel X issue again this product is troublesome. Keep us posted Sean. 😀
@SeanFillner
10 ай бұрын
It would be nice if powertronic would reply to me. If not, I am taking it out and dumping it in the trash.
@teddybowker7309
10 ай бұрын
I have a booster plug fitted from new no issue. 2020 model. They don’t make them for 2021 upwards. 😀
@SeanFillner
10 ай бұрын
@@teddybowker7309 you mean the resistor mod on those years?
@RonOrud
10 ай бұрын
I only had this pop up once, and it fixed itself. I am curious to see what the future brings.
thanks! having issues with my 2023 390 adventure, with the same miles and a fuelx lite. no check engine , but its idling horrible now after running great for months. when it sputters at idle the green lights stop and turn red, then back to green and it smooths out , then repeats. Your code reader special or just an adapter on a OBD2 ( i already have an obd2 with adapter ) ? good video man, thanks!
I watched your installation video (part 8) and it seems that you may have messed up the calibration before first start-up. I'm guessing you should have waited longer until the lights flashed green signalling the calibration with the ECU was complete.
@SeanFillner
10 ай бұрын
I did that although I did not film it. You can see that procedure in my other bike build series playlists. I was the one that came up with that procedure in the first place and powertronic swears you don't need to do that but I disagree with them.
Did you get it thru powerTRONIC? which straight from India?
@SeanFillner
10 ай бұрын
Yes, they finally replied and wanted me to fill out a warranty activation form on their page which is funny because I bought the product directly from them so I sent them a screenshot. Hopefully this does not turn into warranty claim "tennis", if that is the case I will find a different controller. I have purchased 3 of these units and this is the first one I have had issues with.
@virajvrooms
9 ай бұрын
@@SeanFillner Do share the feedback. Filling a warranty form is a norm here due to counterfeit and pre-owned markets. I will be sending them an email with a link to your video. Have been planning to buy one.
@SeanFillner
9 ай бұрын
@@virajvrooms already did. Check the playlist I created for this build series.
What code reader adapter do you need to go from obd2 to KTM?
@SeanFillner
7 ай бұрын
This one if you have a 2022 or newer amzn.to/3Q6ZXBx
@timothyrutledge1021
7 ай бұрын
@@SeanFillner thank you, I have a 2023
@SeanFillner
7 ай бұрын
@@timothyrutledge1021 it will work. I use the same one on my 2023 husqvarna norden 901
@timothyrutledge1021
7 ай бұрын
@@SeanFillner thanks!
I got that code every time I change my exhaust (ie removed cat, resonator etc.) but resetting the code solved the problem, and it didn’t come back. Once after river crossing the code came back, so I suspect it may not be a problem exclusive to fuelx
@SeanFillner
10 ай бұрын
Once the fuel x is removed from the o2 sensor loop the code goes away and never comes back. I tested it yesterday on a ride to work.
Tell them if it's not under warranty it's coming back though the window 😊
@SeanFillner
10 ай бұрын
I laughed out loud when I saw this! At this point it's not far from the truth!
@thedirtyknobs
10 ай бұрын
@SeanFillner that usually gets there attention 😊