This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@monicakhanyi1228
5 ай бұрын
Mm ki minn l ntho k
@dalevard6937 ай бұрын
Dear Peter, this is the best instructional video on this topic on YT. I did this repair step by step. Thanks!
@DAEMANCOMPANY6 ай бұрын
I LIKE YOUR WAY OF WORKING I appreciate your work and showing a fantastic video.
@Alyu7375 ай бұрын
Raally nice video, I appreciate the close up shots on what needs to be taken off.I work as a copier technician, we fix a lot of KM units, this tear down would not work in a field environment, too much involved, time, parts and it would kill any other calls you might have that day,so we just replace the whole assembly.
@user-wp2ot7iw9y6 ай бұрын
what a wonderfull work!
@ragnerjosemoyses88037 ай бұрын
Hey men! You are Very, Very good. Congratulations.
@danielmaragato73022 ай бұрын
Rapaz que vídeo!!!! Congratulation
@ashcomputer1768 Жыл бұрын
SUPER
@luisnina8159 ай бұрын
Please teacher, what blue liquid did you use to clean the bushings at the beginning of the video that appears?
@lucaslopesdesouza1728 Жыл бұрын
Thanks for the tutorial, very good! I followed the tutorial and it worked perfectly, the first printing was perfect but then the papers started to crumble. Do you know what it could be please?
@pbwis
Жыл бұрын
Hi, it may be a few reasons. 1 - lower pressure roller has been installed from a different model ie: C224. (36:47) C454e and C224 are "almost the same", but the lower-pressure roller has a different diameter. 2 - make sure you installed the tension spring in the correct way (48:30) 3 - (13:32) Ensure the orange roller and bearings are in good condition. 4 - it can be damp paper 5 - check the service manual regarding to topics: Fuser motor speed and fusing temperature.
@user-lp7dd7dz9m
10 ай бұрын
@@pbwis are you using aftermarket parts?
@mdnabil981911 ай бұрын
I have konica bizhub 363. It error c 3423. Can you please help me.
@geokaisa7 ай бұрын
so how long is this supposed to last?
@TKHAN7316 ай бұрын
Plz mention the model and parts no of the unit
@salman579 Жыл бұрын
Which model ?
@pbwis
Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@kcmatrica7210 Жыл бұрын
Which model ???
@pbwis
Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
Пікірлер: 22
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@monicakhanyi1228
5 ай бұрын
Mm ki minn l ntho k
Dear Peter, this is the best instructional video on this topic on YT. I did this repair step by step. Thanks!
I LIKE YOUR WAY OF WORKING I appreciate your work and showing a fantastic video.
Raally nice video, I appreciate the close up shots on what needs to be taken off.I work as a copier technician, we fix a lot of KM units, this tear down would not work in a field environment, too much involved, time, parts and it would kill any other calls you might have that day,so we just replace the whole assembly.
what a wonderfull work!
Hey men! You are Very, Very good. Congratulations.
Rapaz que vídeo!!!! Congratulation
SUPER
Please teacher, what blue liquid did you use to clean the bushings at the beginning of the video that appears?
Thanks for the tutorial, very good! I followed the tutorial and it worked perfectly, the first printing was perfect but then the papers started to crumble. Do you know what it could be please?
@pbwis
Жыл бұрын
Hi, it may be a few reasons. 1 - lower pressure roller has been installed from a different model ie: C224. (36:47) C454e and C224 are "almost the same", but the lower-pressure roller has a different diameter. 2 - make sure you installed the tension spring in the correct way (48:30) 3 - (13:32) Ensure the orange roller and bearings are in good condition. 4 - it can be damp paper 5 - check the service manual regarding to topics: Fuser motor speed and fusing temperature.
@user-lp7dd7dz9m
10 ай бұрын
@@pbwis are you using aftermarket parts?
I have konica bizhub 363. It error c 3423. Can you please help me.
so how long is this supposed to last?
Plz mention the model and parts no of the unit
Which model ?
@pbwis
Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
Which model ???
@pbwis
Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@kcmatrica7210
Жыл бұрын
@@pbwis Thanks for the comments
kzread.info/dash/bejne/m4WKzteDdrO2l7w.html