Hi, I'm not sure if this helps, but I would suggest checking that the paper size in the Tray 1 cassette matches the size set in the device settings. Additionally, you could try swapping the feeder assembly between Trays 1 and 2 to rule out issues with the rollers, clutch, etc. Generally, the E061 error indicates an incorrect paper size.
@maniphotocopy88049 күн бұрын
can you help me for toshiba e282 error E061
@danielmaragato73023 ай бұрын
Rapaz que vídeo!!!! Congratulation
@photocopy-printer73404 ай бұрын
Is the structure of the toshiba E studio 6528a fuser unit similar to this machine?
@pbwis4 ай бұрын
6528A and 5528A are completely different fusers
@photocopy-printer73404 ай бұрын
@@pbwisIs it the same as the Toshiba e 4515ac version?
@pbwis4 ай бұрын
It is very similar to 4515AC, but not the same. 6528A Belt (6LL51804000 BT-FC6525), Sheet Pad (6LJ58874000 SHEET-PAD-BELT), Pressure Roller (6LK55468000 PR-FC505).
@photocopy-printer73404 ай бұрын
@@pbwis Please make a video, there are many people looking forward to it
@raydoescode4 ай бұрын
What version of python do you have? I am unable to install the epel-release due to a deprecation warning.
@pbwis4 ай бұрын
I have Python 3.9. Do you use "Fedora-family" OS?
@xyzxyz60954 ай бұрын
Hello Peter. Thank you for the ViM 4 Python video, it's well explained at a good pace for beginners. ViM is fascinating and frightening at the same time but you helped me understand it a little bit more. Thank you again and be blessed and successful in all your actions. Salutations from France.
@pbwis4 ай бұрын
I appreciate your valuable and constructive feedback. I'm glad you enjoyed it. In hindsight, I could have made this video shorter. Thanks for your comment. 😊
@bigcopiertech1236 ай бұрын
nice working way. I like your hard work and making a nice video to understand the work. thanks
@user-vo6yy3fi3v6 ай бұрын
Great music
@A2YU096 ай бұрын
Raally nice video, I appreciate the close up shots on what needs to be taken off.I work as a copier technician, we fix a lot of KM units, this tear down would not work in a field environment, too much involved, time, parts and it would kill any other calls you might have that day,so we just replace the whole assembly.
@RAJAPRINTERMANCHESTERUK6 ай бұрын
kzread.info/dash/bejne/m4WKzteDdrO2l7w.html
@user-wp2ot7iw9y7 ай бұрын
what a wonderfull work!
@DAEMANCOMPANY7 ай бұрын
I LIKE YOUR WAY OF WORKING I appreciate your work and showing a fantastic video.
@TKHAN7317 ай бұрын
Plz mention the model and parts no of the unit
@geokaisa8 ай бұрын
so how long is this supposed to last?
@dalevard6938 ай бұрын
Dear Peter, this is the best instructional video on this topic on YT. I did this repair step by step. Thanks!
@ragnerjosemoyses88038 ай бұрын
Hey men! You are Very, Very good. Congratulations.
@missaq78611 ай бұрын
Your video helped me a lot appreciate you Thanks
@luisnina81511 ай бұрын
Please teacher, what blue liquid did you use to clean the bushings at the beginning of the video that appears?
@mdnabil9819 Жыл бұрын
I have konica bizhub 363. It error c 3423. Can you please help me.
@ashcomputer1768 Жыл бұрын
SUPER
@lucaslopesdesouza1728 Жыл бұрын
Thanks for the tutorial, very good! I followed the tutorial and it worked perfectly, the first printing was perfect but then the papers started to crumble. Do you know what it could be please?
@pbwis Жыл бұрын
Hi, it may be a few reasons. 1 - lower pressure roller has been installed from a different model ie: C224. (36:47) C454e and C224 are "almost the same", but the lower-pressure roller has a different diameter. 2 - make sure you installed the tension spring in the correct way (48:30) 3 - (13:32) Ensure the orange roller and bearings are in good condition. 4 - it can be damp paper 5 - check the service manual regarding to topics: Fuser motor speed and fusing temperature.
@user-lp7dd7dz9m11 ай бұрын
@@pbwis are you using aftermarket parts?
@pbwis Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@monicakhanyi12286 ай бұрын
Mm ki minn l ntho k
@kcmatrica7210 Жыл бұрын
Which model ???
@pbwis Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@kcmatrica7210 Жыл бұрын
@@pbwis Thanks for the comments
@mdshaifuzzaman9306 Жыл бұрын
Very nice video.
@mdshaifuzzaman9306 Жыл бұрын
Where you from boss?
@salman579 Жыл бұрын
Which model ?
@pbwis Жыл бұрын
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@dinnillevialva6912 жыл бұрын
Where can I get the toner to refill ?
@almanar30022 жыл бұрын
What kind of camera do you shoot with and how do you shoot while you work with both hands
@OscarGomez-wv9fd2 жыл бұрын
Can you do Toshiba e4505AC?
@Silvercoastnc2 жыл бұрын
This was extremely helpful. Great job Petter.
@FieldServiceTechBusiness2 жыл бұрын
Excellent and thorough disassemble and reassemble with new kit. Lighting is perfect! This rebuild looks smooth, seasoned hands are obvious. I have a 8518A with a C471 error and will need to at least replace the thermostat (fuse). It will be my first breakdown of this fuser and this helps! Thank you so much for posting, please post more! What video software do you use? FST
@trungtuan19952 жыл бұрын
thanks guy ! from vietnam
@mdmuradhossain38652 жыл бұрын
কালো পেচানো পেচানো ওই দুইটার নাম কি?
@izwanmaziraresources41093 жыл бұрын
Hai do u have vedio how to refurbish 3005ac developer?
@nobitajunior9123 Жыл бұрын
same step..this model and 3005 have same developer tank.
@pradeepsamantha5353 жыл бұрын
Good
@alejandroschweigel24693 жыл бұрын
Hello Petter I hope you are very well. Do you have any possibility to make and upload a video with the replacement of the first transfer roller in the e-2055c or 4555c family? Thank you
@alejandroschweigel24693 жыл бұрын
Excellent video. Great contribution, very detailed, step by step. Thank you
@derrickmorrison58323 жыл бұрын
I really appreciate the detail. Once the task is complete what service codes are required to "run the developer in" Thanks,
@gameskiller-official66443 жыл бұрын
nice and thankfully
@edgarcuellar46663 жыл бұрын
I clean the unit as show, now when is printing make some white lines, what can I do to solve this?
@pbwis3 жыл бұрын
I think some debris left between the magnet roller and "doctor blade". The silver magnet roller [10:40] must be vacuumed very well. And also filled up with new developer material. Try to slot piece of paper into the gap between the yellow stripe [24:52] and a magnet roller and swipe from right to left a few times. After that spin a magnet roller [25:05] to make sure lines gone. But if you have debris inside the unit - the issue will occur again.
@edgarcuellar46663 жыл бұрын
@@pbwis Thanks for your replay. I rolled back and forward very slowly the magnet roller and it got cover but this did not solve the problem. I tried cleaning the drum that solved the problem
Пікірлер
can you help me for toshiba e282 error E061
Hi, I'm not sure if this helps, but I would suggest checking that the paper size in the Tray 1 cassette matches the size set in the device settings. Additionally, you could try swapping the feeder assembly between Trays 1 and 2 to rule out issues with the rollers, clutch, etc. Generally, the E061 error indicates an incorrect paper size.
can you help me for toshiba e282 error E061
Rapaz que vídeo!!!! Congratulation
Is the structure of the toshiba E studio 6528a fuser unit similar to this machine?
6528A and 5528A are completely different fusers
@@pbwisIs it the same as the Toshiba e 4515ac version?
It is very similar to 4515AC, but not the same. 6528A Belt (6LL51804000 BT-FC6525), Sheet Pad (6LJ58874000 SHEET-PAD-BELT), Pressure Roller (6LK55468000 PR-FC505).
@@pbwis Please make a video, there are many people looking forward to it
What version of python do you have? I am unable to install the epel-release due to a deprecation warning.
I have Python 3.9. Do you use "Fedora-family" OS?
Hello Peter. Thank you for the ViM 4 Python video, it's well explained at a good pace for beginners. ViM is fascinating and frightening at the same time but you helped me understand it a little bit more. Thank you again and be blessed and successful in all your actions. Salutations from France.
I appreciate your valuable and constructive feedback. I'm glad you enjoyed it. In hindsight, I could have made this video shorter. Thanks for your comment. 😊
nice working way. I like your hard work and making a nice video to understand the work. thanks
Great music
Raally nice video, I appreciate the close up shots on what needs to be taken off.I work as a copier technician, we fix a lot of KM units, this tear down would not work in a field environment, too much involved, time, parts and it would kill any other calls you might have that day,so we just replace the whole assembly.
kzread.info/dash/bejne/m4WKzteDdrO2l7w.html
what a wonderfull work!
I LIKE YOUR WAY OF WORKING I appreciate your work and showing a fantastic video.
Plz mention the model and parts no of the unit
so how long is this supposed to last?
Dear Peter, this is the best instructional video on this topic on YT. I did this repair step by step. Thanks!
Hey men! You are Very, Very good. Congratulations.
Your video helped me a lot appreciate you Thanks
Please teacher, what blue liquid did you use to clean the bushings at the beginning of the video that appears?
I have konica bizhub 363. It error c 3423. Can you please help me.
SUPER
Thanks for the tutorial, very good! I followed the tutorial and it worked perfectly, the first printing was perfect but then the papers started to crumble. Do you know what it could be please?
Hi, it may be a few reasons. 1 - lower pressure roller has been installed from a different model ie: C224. (36:47) C454e and C224 are "almost the same", but the lower-pressure roller has a different diameter. 2 - make sure you installed the tension spring in the correct way (48:30) 3 - (13:32) Ensure the orange roller and bearings are in good condition. 4 - it can be damp paper 5 - check the service manual regarding to topics: Fuser motor speed and fusing temperature.
@@pbwis are you using aftermarket parts?
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
Mm ki minn l ntho k
Which model ???
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
@@pbwis Thanks for the comments
Very nice video.
Where you from boss?
Which model ?
This particular model is: BizHub C454e (Fuser A4FJR70422). But very similar models are: C224, C284, C364, C284, C258, C308, and C368 (Slightly different frame, pressure roller and halogen lamp)
Where can I get the toner to refill ?
What kind of camera do you shoot with and how do you shoot while you work with both hands
Can you do Toshiba e4505AC?
This was extremely helpful. Great job Petter.
Excellent and thorough disassemble and reassemble with new kit. Lighting is perfect! This rebuild looks smooth, seasoned hands are obvious. I have a 8518A with a C471 error and will need to at least replace the thermostat (fuse). It will be my first breakdown of this fuser and this helps! Thank you so much for posting, please post more! What video software do you use? FST
thanks guy ! from vietnam
কালো পেচানো পেচানো ওই দুইটার নাম কি?
Hai do u have vedio how to refurbish 3005ac developer?
same step..this model and 3005 have same developer tank.
Good
Hello Petter I hope you are very well. Do you have any possibility to make and upload a video with the replacement of the first transfer roller in the e-2055c or 4555c family? Thank you
Excellent video. Great contribution, very detailed, step by step. Thank you
I really appreciate the detail. Once the task is complete what service codes are required to "run the developer in" Thanks,
nice and thankfully
I clean the unit as show, now when is printing make some white lines, what can I do to solve this?
I think some debris left between the magnet roller and "doctor blade". The silver magnet roller [10:40] must be vacuumed very well. And also filled up with new developer material. Try to slot piece of paper into the gap between the yellow stripe [24:52] and a magnet roller and swipe from right to left a few times. After that spin a magnet roller [25:05] to make sure lines gone. But if you have debris inside the unit - the issue will occur again.
@@pbwis Thanks for your replay. I rolled back and forward very slowly the magnet roller and it got cover but this did not solve the problem. I tried cleaning the drum that solved the problem
thank
Good. Keep post more video