Klein Tools 32900 7-in-1 Impact Flip Socket with Handle
Today we are taking a look at the Klein Tools 32900 7-in-1 Impact Flip Socket Set with Handle. As of the time of filming this video, this is a new release from Klein Tools.
More Information From Klein Tools!
www.kleintools.com/catalog/mu...
Link to purchase this Klein Tool!
www.homedepot.com/p/Klein-Too...
#KleinTools #KleinTools32900 #KleinToolsImpactFlipSocketSet #KleinToolsImpactFlipSocket #KleinToolsImpactFlipSocketWithHandle #KleinToolsFlipSocketSetWithHandle #KleinToolsSocketSet #KleinTools7in1 #KleinToolsImpactSocket #KleinToolsNutDriver #KleinToolsMagneticDriver #KleinToolsMagneticNutDriver #KleinTools32900FlipSocket #KleinTools32900ImpactFlipSocketSet #KleinTools32900ImpactFlipSocketSetWithHandle #KleinToolsImpactRated #KleinToolsImpactRatedTools
Пікірлер: 114
This thing looked so stupid before I realised how it worked. Now I think it's genius. What a great little tool!
Not to feel left out here: As a commercial electrician, this is a must have.
This is a must have for Hvac technician. I have this with me at all time. From remove motor, compressor and tearing down unit.
@zacharysherry2910
Жыл бұрын
Electrical too. I'm an electrician and have had three of these... Only because I drop them from very high places every few years and have to replace it lol. Just wish it had 9/16"
As an industrial maintenance electrician this is a must have! It lives in my back pocket with a few other select tools and I use it every day.
@jopo6388
Ай бұрын
Let me guess... You don't wear a real 'Tool Pouch'?
I couldn’t figure out how to get it out. Thanks for the help. Wasn’t into breaking my brand new tool
A/V installer here. Having a 1/2 inch impact ready socket handy is a godsend when mounting tv's.
I've been using mine about 3 weeks now. Really liking it.
Nice tool to have for a quick use on hand.
Very Cool Thanks 👍🏽 Merry Christmax 🎄
I'm very happy with mine.
They sell this in a set for the 11 in 1 and flip sockets at lowes for 40. I put this straight in my impact. Beautiful set
Excellent overview buddy! 👍
Helpful thank you
Looks like a cool tool ! Nice review !!
As a solar electrician this is a must have and a everyday use.
@theghettocowboy7234
Ай бұрын
Are you worried about braking it I’m thinking about buying it
Nice tool, but one huge improvement they should make... allow screwdriver bit storage in the handle (use a screw on cap and allow it to hold 3 or 4 bits). The handle looks plenty big enough.
@csimet
2 жыл бұрын
I'd also like to see a metric version. These can reduce my need to carry multiple nut drivers, saving so much space.
@MORGANSMaintenance
2 жыл бұрын
Someone suggested to take the handle from my 14 in 1 adjustable length screwdriver and just put this shaft in that handle. Gives you bit storage and nut drivers.
@csimet
2 жыл бұрын
@@MORGANSMaintenance Do you have a link to that 14-n1?
@MORGANSMaintenance
2 жыл бұрын
@@csimet I keep trying to put one and it keeps deleting it but it's you can search Klein 14 in 1 on Home Depot.
@wim0104
2 жыл бұрын
The 14-in-1 handle compromizes the grip; the rubber loosens & starts to spin. And its bit storage falls apart on commercial/industrial sites. The spinning cap is great though!
Looks interesting !
Nice. I don’t even need the Handle. I NEED THAT!!
Great for sheet Metal 🤘
I like my multi nut driver. It goes deeper. Plus most of the time, you don't need to keep the extra bits in your pocket when you use it...I use the 15 in 1 screwdriver. These two in my pocket serves all my needs
I'm super confused as to what this is exactly for some reason. I thought they were sockets, but after he showed them that shape doesn't look like any sockets I've ever seen. 2:35. What is this? They're also super shallow. Can someone explain to me what I'm missing? Sorry!
I tried two Home Depot’s with no luck. Their websites all say they have the item in stock it tells you the exact number of items they have in stock so I ended up having it delivered this coming Monday. Sick vid!
@TheToolReviewChannel
2 жыл бұрын
My Home Depot when they get new Klein stuff doesn’t put it out right away. You have to ask or order it online and pick it up in the store.
@Blue-Electric
2 жыл бұрын
@@TheToolReviewChannel I just got mine! Check my video out👍
@zacharysherry2910
Жыл бұрын
They have these at every home Depot around me... Maybe it got popular.
@jocool562
4 ай бұрын
Nowadays try Lowe's
Nice tool
I'm a School maintenance cat and I just ordered one of these. I know I'll use it constantly a long with my knipex, cobra and pliar wrench.
@TheToolReviewChannel
Жыл бұрын
Should be a nice addition to the line up!
Just got one, thanks for showing us the ropes.
@TheToolReviewChannel
Жыл бұрын
No problem!
I could see just popping the handle in the tool box and using the dive and sockets on my drill and impact driver.
Awesome tool, got this and the 14/1 bit driver and swapped the shafts making it a 21/1 and it is worth having in your bags or tool box.
@ExergameStation
Жыл бұрын
Did the same
@smittysmith6173
Жыл бұрын
I have mine ordered now. Be here Tuesday.
any idea if there is something similar in metric ?
One of my bits are stuck what can I do ?
I recently got one but my handle keeps getting stuck with the flip socket. To the point where I end up using pliers in order to pull it out. Yesterday I applied some penetrant solution and seems to release with less force but still not as smooth as yours. Any tips? I don’t have the receipt so I’m stuck with this one.
Looks dope but the sockets aren't very deep, a lot of the time the bolts are longer than this will reach. But I love the idea of stacking all them. Would save me a lot of time
@zacharysherry2910
Жыл бұрын
That's a different application. You probably want some "pass through" nut drivers
Do 5/16" bits work well?
I bought this and honeslty its the best tool ever made ! I only hope they make a metric version as it really is the best tool ever MADE BY A HUMAN BEING !
so I did buy one from home depot, haven't used it much as I thought I would, my main suprise is that the handle does not hold the shaft well, you can easily pull the shaft out of the handle with out pressing on the handle release. eyebrow raiser there, not sure if this was intended. I'd recommend buying the flip shaft separately and going with a different handle
Thanks god bless
I just purchased one and right put the box the chuck on the handle does not hold the drive
does anyone do this in metric? I want some for my motorcycle tool bag. , I technically do the same thing, for storage reasons but they don't "latch" into place So i run the risk of losing the more so than in this application.
Wanting to get one but am curious, why is it only available at h\d?
@TheToolReviewChannel
2 жыл бұрын
Not sure. It’s kinda like when they released there updated wire strippers. They were only available at Home Depot for a little while and then everyone started having them
I like the idea here and design, but I wish I could find them in both a full metric and full sae set. I carry a small set in my toolbag, and to replace it with half the sockets would be a huge space and weight saver.
@galash5
2 жыл бұрын
Check out malco. They make some similar bits in 6mm/8mm and 8mm/10mm along with 1/4:5/16 and 5/16:3/8 They’re impact style bits instead of set up like this, but similar design if that interests you.
@caramelzappa
2 жыл бұрын
@@galash5 Thanks I'll check them out
That's a cool tool, but a bit useless outside of north America, I reckon if they sold a metric version it'd be very popular....
Has anyone had an issue with it being impact rated and destroying the magnet?
@TheToolReviewChannel
Жыл бұрын
I haven’t yet. I’ve been using Klein’s 3 in 1 which is almost the same thing but only 1/4 and 5/16s socket. Haven’t hard any problems yet but we’ll see how it holds up. On a big duct work job right now and constantly driving in screws.
I want something like this but with a ratchet
@chrisfoster3772
2 жыл бұрын
I'll have my wife hit you up
Found me one at the swap meet unopened for $10.
You dont use 11/32 for condenser fan motor nuts?
@TheToolReviewChannel
11 ай бұрын
I haven’t made my way over to the service side yet. I need more experience doing installs
Nice but 5hey need a deep well option. Getting nuts off even half inch studs is a pain (and usually a trip back to the truck). Just one example stove and dryer cords.
@nicholasthon973
2 жыл бұрын
Klein 6 in one nut driver is what you’re looking for.
What makes this driver and "Impact"?
@TheToolReviewChannel
Жыл бұрын
It’s impact ready and can be used in your impact drive.
Can’t say i have ever had to use an 11/32 lol like literally never
A little stiff ? Lol bo idk what's wrong with mine but dag gon it's hard as crap to take it out of the handle
This would be even more amazing if the driver was ratcheting
Looks awesome! Available in Canada?
@desi579
2 жыл бұрын
Haha where??
@gordbaker896
Жыл бұрын
No, they won't even ship to Canada.
@imkristopherbaird
Жыл бұрын
@@gordbaker896 We've got them now in Canada. Home Depot, etc.
@gordbaker896
Жыл бұрын
@@imkristopherbaird My email from Klein President last week said they could not ship to Canada. Are they Metric or Normal?
@imkristopherbaird
Жыл бұрын
@@gordbaker896 imperial (1/4, 3/16, 5/16th etc.)
WE can read!
I really wanna get this, but I live in Canada 😓
@TheToolReviewChannel
2 жыл бұрын
Home Depot doesn’t ship to Canada?
@vedicgags775
2 жыл бұрын
@@TheToolReviewChannel yeah that’s the thing, it only ships to US, and not Canada
@G8tr1522
2 жыл бұрын
@@TheToolReviewChannel metric hardware.
HVAC sizes....1/4....5/16.....3/8 sometimes....the larger sizes mean shit is real bad
@AllTattedUp13
2 жыл бұрын
Come in handy if u do alot of blower motor change outs. Hate when I gotta run out to my truck for sockets 😂😂
@urjnlegend
2 жыл бұрын
Need an 11/32 with hollowshaft for alot of those I've noticed, or at least in the truck
@feyrband
2 жыл бұрын
They make an HVAC version that is the multi bit screwdriver with just the 1/4x5/16 socket
Wish it came in metric
Real nass like
Nice overview. How sturdy is this long-term? A side note, please consider editing out the often-repeated “as you can see” comment. It’s wearying, and adds nothing to a very good review.
Jeez, the American Imperial system needs to be changed to metric. Anyone outside of the US of A is listening to the 'eleven thirty seconds and three eights' and 'seven sixteenth and a half inch' and thinking WTF! Great video as always.
@TheToolReviewChannel
2 жыл бұрын
Haha thank.
@gordbaker896
Жыл бұрын
The only country in the world to put men on the moon uses Imperial. Canada should go back to it.
Why is the handle so big?
@TheToolReviewChannel
2 жыл бұрын
You’d have to ask Klein that question. My guess is to get better leverage.
Too bad they don't make this in metric
I'm still Malco.
@urjnlegend
2 жыл бұрын
They charge way too much for their bit holding screwdrivers, $20 for a cheap plastic handle
i was going to say this is NOT a mechanics tool to work on cars, more for electricians
@TheToolReviewChannel
Жыл бұрын
Yes this is a tool for the HVAC and Electricians. Don’t think I’d work real well for you automotive guys
@ACommenterOnYouTube
Жыл бұрын
@@TheToolReviewChannel For YOU automotive guys ?? Are you making assumptions ??
Don’t be an idiot like me and try and pull the bits off the business end. I was cursing at Kline. Home Depot. My kids. Long night. Thanks 😂
@TheToolReviewChannel
Жыл бұрын
Lol
Why is the handle so big and fat? Im an electrician and you need to get in small spaces. I also feel sorry for you the world has gone metric .
@TXAslingr
Жыл бұрын
They have the option for the magnetic bar and the nut drivers without the handle.