Klein 7-In1 Nut Driver - amzn.to/3POg8BX Klein 6-In-1 Nut Driver - amzn.to/3RSsV8m Klein 5-In-1 Nut Driver - amzn.to/3RTqFxz Klein Ironworker Pliers - amzn.to/3PQtCx0 Klein 8-In-1 Insulated Screwdriver Set - amzn.to/3PwVfvg Klein Residential Electrical Too Kit - amzn.to/3J1nTT9 Klein Store on Amazon - amzn.to/3cBWTgM Exceed Designs TiRant Razor V2 - amzn.to/3RTqPFb

Looking forward to seeing your complete kit!

@txtoolcrib

2 жыл бұрын

While I’m on down time I am trying to revamp it to be as lightweight and efficient as possible.

@maxlvledc

2 жыл бұрын

@@txtoolcrib I've been slowly trying to do the same thing.

I bought that nut driver last year & returned it because it was too many moving parts & heavy & bulky & also not hollow shank

Might be my next purchase. Nice review. Thx. Watching from Ontario Canada 😊

The one with the shank that the bits slide over similar to the malco tool bits. That’s the one. Take the handle off and put that sucker on a impact. Game changer

The 1/2 - 11/16 driver can also be stored in the handle when you're using the 1/4 driver so that you don't misplace or lose it.

Amazing 🤩

I absolutely love my tirant razor. I use it every single day at work and at home. I have the carbon fiber scale to match my wallet and the upgraded ceramic bearing. Butter smooth easy blade change and super light.

How about a segment on micro drivers? Wiha, Picquic teeny turner, and a few other quality drivers? I really like the teeny turner.

I had that one before. I thought it was cool, but it's so heavy and bulky you might as well just carry a full set, or the ones you need imo. There's also ones you can get from wera/wiha/pbswiss? I believe where you can remove the shafts and you have a kit, so you don't have any accessibility issues (i.e. the shafts too thicc) I also found I would rather shift the shafts out or pick up a different one instead of flipping and holding onto multiple pieces, it just seemed like more effort than it was worth. If you want to use that one you can fit a 7mm, 10mm, and I believe some smaller hex sockets (sizes you would use on small electronics like 3mm) to cover the gaps that are in SAE inside of the giant tubes, and I was able to fit a couple 1/4 inch bits in it while still keeping it assembled. It just takes some messing around to get everything to fit.

My wife must have one of those!

Hello, Ben - nice rig! Perhaps you'll give us a tour of your Go Bag once you have it fully set up...

@txtoolcrib

2 жыл бұрын

I will

@edgaraquino2324

2 жыл бұрын

@@txtoolcrib Thanks!

Any chance you might do a video once you complete your bag? You inspired me to make up different bags to have at the ready. I am not a tradesman by any means. But, so far I have made a car kit specific to my current truck and a second tool bag for electrical jobs . I am trying to organize my tools into job specific purposes.

@txtoolcrib

2 жыл бұрын

I certainly plan to do just that.

Have you ever filmed a reveal of your Go Bag contents? Guess I could look at your playlists, huh? 😏

I got this Nut Driver, I thought I wasted my money because of how bulky it is. Im interested in the 7-in-1 Impact Flip Socket

I have it like that tool

Great introduction vid, Just curious is anyone really use thise tool?

a metric version of this would be nice

@sandylanceley3860

Жыл бұрын

There is a metric version, part number 32807MAGM. It’s a little harder to find, though.

IMHO the 7-1 is a lot better. More practical. Is the one I use. .. If looking for compact and better sockets the makita impact sockets in line with the rubber red (metric) and green,(sae) with a good small ratchet, you make a lot of stuff. Add a handle with extension for bits and you can use the sockets as nut drivers too. I can send you a picture of my set if you want... 🤘🏻

Klein needs a metric version or combo version nut driver.

Does the 9/16ths bolt work on a 14 mm bolt or it it more suited for 13 mm bolts? For some reason I run into 14 mm bolts all the time but almost every really great tool kit comes with sockets going up to 13mm..?

That utility knife…I gotta have it

@txtoolcrib

2 жыл бұрын

I left a link for it in the description

@hmurchison8123

2 жыл бұрын

@@txtoolcrib I saw that much appreciated if I order it I’ll use your affiliate link

Nothing with metric sizes? I checked your links.

@sandylanceley3860

Жыл бұрын

Yep, part number 32807MAGM

Do they offer this in metric?

@sandylanceley3860

Жыл бұрын

Yep, part number 32807MAGM

$65 for a utility knife?! Sounds high to me. 🤔

This review is DRIVING me NUTS!! JK...you know nut driver....I'll see myself out....

if only they were all deep socket

Thats not a driver, its a transformer

Have had two, it's garbage 🗑️