Key Stuck In Lock - Won't Come Out ** Solved - Locksmith Parramatta
This video is to help the many people that have a lock and the key gets stuck in the lock, if you have this problem and this video helps you, please give it a thumbs up. Quick video to show you how to remove a stuck or jammed key in a lock - By Dr Lock Locksmith Parramatta. See our website for more info, or for help with you locks in and around Parramatta NSW - Fast Locksmith Parramatta Sydney
#Locksmith #LockShop #Locksmithparramatta
www.drlock.com.au/
www.drlock.com.au/store/
www.drlock.com.au/locksmith-n...
Пікірлер: 165
Got home from a day at the hospital for a loved one only to have this issue at 11pm. Other videos just tried to sell stuff, this one explained everything so well. Saved my sanity!!
Staff called me at midnight key stuck in the door, had to drive down Saw your video Mate you are a bloody legend Pulled the key out in one second I look like a superman
@DrLockShop
5 жыл бұрын
all good, thanks for the feedback,,,
Oh thank God your a life saver u got stuck at my door for ages before I found this video. THANK YOU SO MUCH
I owe you a great deal of thanks! I was struggling with my lock for close to 30 minutes before I looked it up! 2 seconds and done!
Legend thankyou just saved standing out in the rain longer than I would have been!. Not all heroes wear capes.
Thank you . Extremely well explained. My problem solved in minutes after viewing your video. i wish I'd gone to you tube first instead of wasting about 10 minutes jiggling the stuck key -at night -out side in below zero temperatures. we are in the bush and a long way from any Locksmiths so THANK YOU again
😘 I LOVE YOU! This just saved me and my 2 year old and 7 month old twins having to sleep with the front door unlocked
Thank you so much for the video. Had been told that I needed a new lock when all I needed was to tighten the screws...
Thanks for taking the time to show this.
Mate you’re a legend , literally this video saved me from a melt down !
@DrLockShop
4 жыл бұрын
Help me back with a review if you can
Thanks so much for this video. I was just about to smash my door when I told myself “let’s just ask google for a fix” and lo and behold! Your video came out and fixed my problem. Can’t thank you enough!
@DrLockShop
4 жыл бұрын
leave a google review please, if it helped you,, google Dr Lock
Thanks for the clear video!
THANK YOU SO MUCH THIS WAS A LIFESAVER
OMG We spend hours trying to get our key out. then I used your tip and it worked. Thank youuuuu!
Life saving vid. Thank you for uploading!
Worked perfectly, thanks for the help
Great video, tried it out and it worked. Thank you.
Thank you for making this video!
Thank you so much! This saved us today
This saved me from having to reorganize my entire morning. Thank you for making this video.
Saved me 4 hours waiting on a locksmith, thank you!!!
My hero!!!! Thank you!!
Thank you so much for making this video. The key was stuck in for a long time. Thanks again.
@DrLockShop
11 ай бұрын
Glad it helped!
Thankyou so much for this video
Happened to me, started to sweat, found your video, crisis averted. Cheers mate.
This just saved me Thank you
You are awesome! Thank you! My key is now free 🙂
Thank you. It worked! 👍🏼
Thank you....worked perfectly.
omg you saved my life, thank you
Hi Dr.Lock! how's your day? i just want to thank u for helping me. My key was jammed. Im so thankful.
@DrLockShop
4 жыл бұрын
Happy to help!
Thank you! Saved me from going nuts 😜👍🏼
If you look carefully at the end of this video, it looks like Dr. Lock actually has a bit of trouble pulling out the key after he tightened the pair of screws at the back of the cylinder. He said the two screws need to be tightened very tight. But you might not want them so tight, because the plug (a.k.a. core) might need to portrude slightly forward (around 1/32 inch) in order for the plug's pins to align well with the holes above them when pulling out the key. If that's the case, replacing the two screws with screws that are a slightly different length, or inserting very thin shim washers between the screws and the cylinder back, might allow you to fully tighten the screws and have the plug end up in the optimal, slightly portruding position. An important step that's missing from this video is how to remove the cylinder from the lock in order to access the two loose screws on its backside. It would help to include a link to a video that shows how to remove the cylinder.
Thanks a lot!!!
Thanks champion you safe me time and money
WORKED.. I Really appreciate it
Thank you !
You are awesome, saved my 100$ ❤
THANK YOU
Thank you so much it worked
Thank you
Thanks alot sir
I have a similar lock and the flange at the back has come loose so cant open the pins in the door in to thw wall... can i drill it trough to take the whole thing out and replace it? Plus i have no access to the other side of the door . Thanks.
thanks dr lock
Thank you so much, I was about to break my entire door down.
@DrLockShop
4 жыл бұрын
Ya.... I saved another door,,, good to see it helped and it all worked out well
yea just work thanks alot!
had similar problem but was a key that was left there for years, pulling it out wasent possible locktight dint work. could not enter far enought. had to remove the cylinder and oil it back and front, spin key around a few times now its out.
Thank you it worked
LEGEND!!!!!
I have an Ultion lock that can be a bit of a nightmare for removing the key when unlocking and locking the door. it makes me really anxious every time I put the key in the door. The key has to be exactly in the 12 o clock position but even then I'm having to wriggle it a little bit to remove the key
I was about to say this didn’t work for me but then I turned my key 180 degrees and it slid out easy peasy
Thanks it worked 3🙂
Thanks Dr Lock done a d fixed
My key are stucked but i cant put it back to 12’olock direction, any help? Thanks been locked out for an hour figuring it out
@moonbot7613
4 жыл бұрын
O O oh geez I hope you got in ok
@kelyrin-douceuretdessin9476
3 жыл бұрын
Same here ! What ended up happening ? 😅
IT WORKS! Most helpful video I have found on getting key out of lock. Straight & to the point. Thank you.
I’m trying this at this very same moment and I still can’t get it out
Hi Dr Lock, thanks for the nice vids. I undid those screws and then it jammed up on me. anyway to rectify that problem? one of the guide pins can pop out, as the keys come out that far... but that's it. :(
@DrLockShop
5 жыл бұрын
You just needed to tighten them
@admk69
5 жыл бұрын
@@DrLockShop tried that, had shims for my bike and tried that. after broke key off to get out of housing, hoping it would push through. still nothing. :(
I install the padlock and I cannot take the key out when I lock it
THANK YOU SO MUCH.
Hi! thank you for this. could you also help with a cylinder lock.. where in order to get key out once you lock the door... is to go back to the unlock position ONLY .. which renders the door unlocked too... LOL ... yip. thank you!
@DrLockShop
5 жыл бұрын
Sounds like the back tail of the cylinders are not in the right spot, turn both towards the hinge and put back on door
Thank you so much for the video i almost buy a holl new door
Hi, great video but my lock barrel in the cylinder won’t pop back in to the cylinder so I can’t get back to 12 o’clock? Any ideas?
@DrLockShop
4 жыл бұрын
Remove the cylinder and see what is going on, missing a cam screw I guess
Thanks I hope you solved my bike issue. Will check tomorrow.
@DrLockShop
5 жыл бұрын
bike lock is a different system
Omg my circle and key are stuck any solution?
What if it won't go perpendicular? Pushing on the center doesn't help. Now, this is a car lock that is not secured to the door (I'm changing the handle), but even if I hold the cylinder with my hand from the inside, I can't get the key to get all the way straight up-and-down (only a degree or two shy of it). So I presume that's why it won't come out.
@DrLockShop
5 жыл бұрын
car lock and house lock, the key needs to go back to the start position to remove the key.
@CUbluejays1
5 жыл бұрын
@@DrLockShop Thanks. I have the handle and lock out, but still can't get the key out. Any thoughts? imgur.com/Q3KXU53
@CUbluejays1
5 жыл бұрын
Never mind, I got it. The cylinder - somehow - got turned so that a pin that was keeping it from rotating far enough had gotten pushed around/over a nob that it wasn't supposed to go past. I lifted the pin over the nob, allowing the cylinder to turn farther, and the key came out.
My key is stuck but won't turn and get aligned to the 12 o'clock position. Any suggestions?
What if I can't rotate it?
I put wrong key in lock and it wont go out, what should l do?
So I was just not think right today lol. Trying to take the key out as soon as I unlock it and not turning it back
Mine is still not coming out, what do i do? The little circle won't budge please help
What to do when it doesn't get to the 12 o'clock position?
Mine is stuck in the horizontal position, won't budge the other way
I failed on step 1, my key won’t turn to the position where it can be removed 🥺
I have sliding doors and I added an upper lock door jam and the key is stuck inside and it won’t move at all it’s stuck in left to right not in 12 o’clock position how to I get key out?
@DrLockShop
6 жыл бұрын
Sounds like you will need to call a local locksmith to have a look
@sneedfeedandseed2410
5 жыл бұрын
Dr Lock cant afford that. also door is locked and i cant remove the lock. help
What if it's jammed at 2 o'clock
I cant open the door because im stucked in,they key has stucked in the locker,what should I do?
@DrLockShop
5 жыл бұрын
You need to call a local locksmith
hehe.. its worked... thanks man
In my case, there are no screws to re-tighten. But no big deal. The key was pulling the inner cylinder outward, and that caused the lockup. Thus the key was at war with the inner cylinder. To resolve this problem, one must stop the key from grabbing on to the inner cylinder. So I took a lead pencil and put plenty of graphite on the key, and then inserted and removed the key several times. I repeated this graphite application to the key twice, along with the multiple reinsertions of the key. Bingo, the graphite now acts as a slippery lubricant, and so the key no longer grabs the inner cylinder and thus no longer pulls it outward. Now the key just flies out with ease.
@DrLockShop
4 жыл бұрын
Graphite dose not fix, something at the back of the cylinder is allowing the inner part to move too much "forward", the pins can not slide up as the top chamber holes are not alined, graphite is just a lubricant, you still have a problem, I would check it
@new-knowledge8040
4 жыл бұрын
@@DrLockShop Like I said, the key now goes in, and comes out, easier that it has before in the past 16 years of which I have lived in my apartment. The lock had been in use for well over 35 years and any lubricant had surpassed its life limits. A car engine will not do well if you remove the oil. That does not mean that there is something wrong with the engine itself. Just add oil, and bingo, things are back to norm. For instance, If you add a lubricant to the word "Dose", its letters will automatically reorder themselves back to the proper order of "Does".
@DrLockShop
4 жыл бұрын
@@new-knowledge8040 Hi, a car engine is designed to use oil, a lock cylinder inline pin cylinder does not need lubricant if its correct and was not designed to need a lubricant to be added. The lubricant is allowing the misaligned parts to slide past the point of contact and be felt less. But if it works and you can use the lock then it's all good, and if it saves you from having to the lock part then its a good temporary fix. But for me as a Locksmith, it would not be classed as repaired. Most of the time the repair is just as easy, If you send post a link of your lock, I can do a video to show the fix
Nope crap!! Thanks 🙏
@DrLockShop
5 жыл бұрын
3 hours, something else is wrong, call a locksmith
My key won’t go into a twelve o’clock position it just stays in a three o clock
@DrLockShop
4 жыл бұрын
sorry too hard to say
@slhayes126
4 жыл бұрын
@@DrLockShop I have two the one on the front door goes to the 3 o'clock and the one on the back door goes to the 12 o'clock position, and as long as I treat them like they do work in different ways, I can get them out. It drove me nuts for a long time, but now I believe they will both work.
@Deagle-lj7tv
4 жыл бұрын
Lock it in then try
@AshishKumar-up8cx
4 жыл бұрын
Thank you sir it worked on my padlock. God Yahweh bless you.
My wife has put the wrong key in the garage lock and now it's stuck and won't come out. Any ideas?
How can i do that on a car door🙈🙈
legend! works
Halp, mine is small and rusty and it wont press 😭 it would rotate to 2pm when i press it
@DrLockShop
3 жыл бұрын
remove the lock and check
Mine is not turning to 12'o clock position
What if the cylinder doesn’t turn and it’s stuck at a 11-10’o-clock position?
@DrLockShop
3 жыл бұрын
its jammed , bent lock mechanism is my best guess, you need a new lock
@WendzDarKnight08
3 жыл бұрын
@@DrLockShop yeah I took out the pins and springs from the lock. Only way to get the key out.
my problem is I went to unlock and it stopped at 11 o'clock and then 9 o'clock position only and now the key is stuck.
@DrLockShop
4 жыл бұрын
different problem
I've tried this but the key won't come out ..help😩
How to unstuck it when it stuck in 10oclock position
@DrLockShop
8 ай бұрын
Wait till it moves to 6" o'clock
what if I can't turn the key to the 12 o clock position?
@DrLockShop
5 жыл бұрын
Remove the cylinder and check the cam on the back of the cylinder
@redpower24
5 жыл бұрын
@@DrLockShop thank you
im stuck my key 12 oclock at safe box
@DrLockShop
5 жыл бұрын
what type of lock
Still not opening.. the key is in a 9.0clock position by default
mine is still stuck
Hopefully that's the problem with my old Land Rover style key which is stuck in the lock.
What if it can’t go back to the 12 o’clock position
@DrLockShop
5 жыл бұрын
you have a problem with the cam on the back of the cylinder most likly
How tf is this gonna help me open my door I don't even know where I am anymore
In my case I had to turn it to 3o clock
what if you cant turn it to 12 o clock
@DrLockShop
3 жыл бұрын
its a different problem, call a locksmith
I have a little safe and it won’t work
Fucking masterful!!! I was about to rip this door off!!!