Kemimoto fender eliminator kit - Ninja 650 / Z650
Автокөліктер мен көлік құралдары
What's going on youtube?! Shoutout to Kemimoto for sending me this to review and install it! Here's a video about how to install a fender eliminator kit for kawasaki ninja 650 and Z650 2017-2020. I was not paid to make the video , just sent the kit and I gave it away for free to a lucky Ninja owner. Thanks for watching!
Link for fender eliminator :
KEMIMOTO fender eliminator kit : amzn.to/48DxFX3
Пікірлер: 75
Fun fact - those 4 screws that held on your old fender with the loctite also fit in the holes where your front reflector mounts are screwed into on your forks. so you can take off those orange reflectors and the long bolts they sit on, and screw 2 of those screws into place for a much cleaner look up front
At 3:56 someone’s gettin it then the police sirens kick on 🤣🤣🤣🤣
Just got my fender today and the exact same one. Can't wait to install. It looks way better and sportier in my eyes.
Awesome video! Thanks for taking the time to walk through the process and give viewers a clear understanding of the steps.
@MotoRoUsa
2 жыл бұрын
Glad I could help!
Thank you for this Video.. ill being using this to install the fender eliminator...
Awesome video. Look forward to installing mine! I’m sure it will take me longer! Looks great!
Thanks man I just completed my 2021 and your video was very helpful.
@MotoRoUsa
3 жыл бұрын
Thanks for watching man!
Just did mine with this video, thank you so so much! Perfect!
@MotoRoUsa
3 жыл бұрын
You’re welcome! Glad I could help 😊. Ride safe! 🏍💨
You made this very easy! Thank you so much!! ❤️
@MotoRoUsa
2 жыл бұрын
You’re welcome! Thanks for watching!
official video and helped me a lot. Thanks homie!
@MotoRoUsa
3 жыл бұрын
You’re welcome bruh!
Hell yeah thanks for the video!!
Nice bike bro and it does look way better with the fender eliminator.... thumbs up
@MotoRoUsa
3 жыл бұрын
RandomVideos502 thanks brotha!
Thank you!! Worked for 2022 ninja 650
@MotoRoUsa
Жыл бұрын
Awesome!
Nice video. I'll be installing mine tomorrow. One suggestion though. On the bolts that holds it on I'm putting a drop of Loctite on. It will help them resist loosening due to vibration. The original have a dab of Loctite on them.
@MotoRoUsa
3 жыл бұрын
Good point! Thanks!
Awesome video. Thanks
@MotoRoUsa
4 жыл бұрын
TheTriggaman177 thanks for watching !
Thank you
Buonasera amico. Molto bene! Sicuramente è migliorato molto, ha migliorato notevolmente l'estetica della moto. Video molto buono.
Thanks bro.
Thanks for the video! 3:58in you hear a Dodge Challenger scat pack taking off lol
@MotoRoUsa
2 жыл бұрын
Not sure what car was it but sounded good lol
thank you SO MUCH for this video, helped me so much with my 650 fender eliminator install. Can you possibly do a video regarding putting in white LED headlights on this thing? can you just buy headlights and plug and play and replace the old ones or do you have to do additional wiring or anything?
@MotoRoUsa
3 жыл бұрын
Check out my other video about the older ninja 650 led headlights install. Should be the same
Thanks 🙏
You da man
Thanks
where did you put the black rubber gasket? did i miss it?
@MotoRoUsa
3 жыл бұрын
Which black rubber gasket? Can’t remember was a while back?
@dewroc66
2 жыл бұрын
It goes on the tag light , he missed it , was in the bag with the nuts ….
Awesome video! Thank you so much, very informative and helpful! Hoping all the same directions apply when I do this to my 2020 Ninja 650! This will be the first time I am doing something like this so out of curiosity how do you get the licence plate on there? Is just screws or something?
@MotoRoUsa
3 жыл бұрын
Grant Ginn it’s really easy! If needed come back to the video and do it along with it. I pretty much recorded the whole process , too little edits .
@GmanG660
3 жыл бұрын
Awesome thank you, you really did make it super easy to follow it's amazing! For the final step though (Putting on the licence plate) is it just screws and that's it?
@MotoRoUsa
3 жыл бұрын
Grant Ginn yes . You can use any screws for the license plate. Your choice! Usually the bike dealerships have the ones with reflectors on them and spring washer in the back
@GmanG660
3 жыл бұрын
@@MotoRoUsa Cool thank you for taking the time to respond and help me out! Super appreciated!🙏
@MotoRoUsa
3 жыл бұрын
Grant Ginn no problem man! Thanks for watching !
Is there a possibility to add a rear reflector (red), because in Europe (Belgium) this is obligated?
@MotoRoUsa
2 жыл бұрын
What reflector? The tail light?
@reneevandeputte8448
2 жыл бұрын
@@MotoRoUsa a red one u put right under your license plate.
@MotoRoUsa
2 жыл бұрын
@@reneevandeputte8448 I’m not sure how you’re gonna attach it. Here in US we have license plate screws that have red reflectors on it. www.common-motor.com/red-license-plate-reflector-bolt?gclid=EAIaIQobChMIl6y1xfvB9gIVlqXICh1UCQ2JEAQYASABEgI9QfD_BwE
@reneevandeputte8448
2 жыл бұрын
@@MotoRoUsa That is indeed the question, how am I going to attach it. I think maybe I make two extra wholes in my license plate, or I use the already existing wholes and put some metal with a reflector on in between, idk yet.
@MotoRoUsa
2 жыл бұрын
@@reneevandeputte8448 you don’t need to put two extra holes . We attach the license plate only on top two bolts and we use those reflective bolts like the ones I sent earlier in that link. We don’t use 4 bolts for each corner of license plate
I’ve got the same one. Did everything the way it should. Only problem I’m having is putting the retainer back in. The seals look deformed and won’t allow the retainers to go back in. 😳
@MotoRoUsa
2 жыл бұрын
What seal and what retainer?
@simmplicity7505
2 жыл бұрын
@@MotoRoUsa when you put the turn signal back in it’s the metal retainer you first put on. The rubber part of the light looks a bit deformed. Like it’s pushed in a bit but it’s all the way thinking that was the issue but it wasn’t.
Does anyone know if this is still compatible with 2022 ex650?
@MotoRoUsa
11 ай бұрын
If the tail end looks the same it should be compatible
@techtonicblast4421
11 ай бұрын
@@MotoRoUsa thanks!
@techtonicblast4421
10 ай бұрын
@@MotoRoUsajust got it today and got it done in about 45 min thanks to your video thanks a lot!!
Does it fit on a ninja 650 2024?
@MotoRoUsa
2 ай бұрын
It should but check description in Amazon store
I did mine on my 2021 ninja 650 after watching this video. Everything went well but something happened with my rear seat it won't lock anymore. Has anyone came across this?
@MotoRoUsa
2 жыл бұрын
Unless you pulled the cable that goes to the latch I don’t see why it wouldn’t lock. Check to make sure what’s holding it from locking and go from there.
@wildboy9557
2 жыл бұрын
I checked the cable it is in place but when i put the seat down the latch seems to be pulling back a bit and not sure if I can adjust that
I did my today and I did the same mistake he did. Hahahaha maybe I should’ve watch the video first lol 😂 anyway thanks
There was a police chase going on in the background