Installation instructions for our new Fender Eliminator Kit for the 2017+ Kawasaki Z650 and Ninja 650
Жүктеу.....
Пікірлер: 149
@IKKIMURDERER6 жыл бұрын
One of the best "step by step" videos ever made. Very good, very clean. Kind regards from Portugal 😉
@mxmotoguy6 жыл бұрын
Fantastic product! I supervised my 17 year old son install this in under an hour going step by step with this video. Factory quality (probably better), excellent fit and finish, and I liked that Vagabond utilized the factory parts without cutting and splicing. Perfect addition to my 2017 Ninja 650 ABS.
@evev32182 жыл бұрын
Watched this and ordered the product. Saw it go from San Diego to Bell Gardens to Santa Fe Springs to LA to Tokyo and finally to Melbourne Aust. It arrived today and so I rewatched the video and it is done. Easiest install video to watch and follow and the fender eliminator is a great product. LOVE IT!!!!
@joshsalvo71885 жыл бұрын
I’m OCD! Get that little piece of plastic out from under the seat! Haha great video. Very informative.
@13angelotuo Жыл бұрын
Thank you. Just finished my 22 Z650 thanks to your video. Didn't think I could do it but, super easy
@claytonicnutz4 жыл бұрын
Installed this badboy last night on a 19 z650 - fookin' tail light rubber grommit was the hardest part. Now it looks fabulous.
@agsoave5 жыл бұрын
I accidentally found this video just after doing all this job in my bike. Very instructive, very objective and professional. A little bit long, but still good. I add a little hint for extracting that last screw that holds the fender, by extracting other two 8mm bolts in the front (under the driver seat), and then slide back a little bit the big black plastic part, allowing you to use the phillips screw driver in an easier way to release the fender. Thank you.
@quailbrander6 жыл бұрын
This a great and well thought out video, made switching my stock fender with your guys' super easy!
@seangraves20393 жыл бұрын
Followed it step by step and it could not have been any clearer! Awesome Job!
@Truthasvictim6 жыл бұрын
Wow, what a great video. So clean and clear about every single detail. Getting my plasma blue 2018 in a few days and think this is going to be a gimme.
@waterbuffalo385 жыл бұрын
Installed on my 2019 ninja 650 ABS, perfect fit. Really clean look. Super easy install. Highly recommend over these other $100+ fender eliminator kits. Installation time was about 45 minutes but that’s because it was my first time ever working on a motorcycle so I kept pausing and playing this video. Could very easily be a 30 minute or less install
@JQUICK21
4 жыл бұрын
How do you like your bike? Might be getting one real soon...same year and the orange ABS model....is the seat comfortable? Anything you don't like?
@waterbuffalo38
4 жыл бұрын
QUICK-STAR I love it, it’s very comfortable to ride. And very easy to maneuver. Only thing I don’t like is you can’t use a ram mount for your phone in the fork stem because it’s not a round hole it’s a hexagon hole. But I’ve found an adapter that works perfectly with it to mount my phone I can send you the link if you’d like. Overall it’s a great bike in my opinion
@TheBigAppleRider5 жыл бұрын
Great quality product and fairly simple installation. Thank you for this video!
@93lopezi5 жыл бұрын
Good in depth video but I prefer clear and short instructional videos. Would definitely purchase this product.
@SJMudTurtle7 жыл бұрын
Thank goodness for this video! Couldn't have done it without it, that small hidden screw had us baffled! Thanks guys!!
@wRay_4414 жыл бұрын
I installed mine on my z650 and fits really well! Easy video tutorial to follow
@DezBanks6 жыл бұрын
Great product. I highly recommend this fender eliminator. I got same day shipping for free from amazon and installed it today on my 2017 Kawasaki Ninja 650. Quick and simple installation. Thanks Vegabond Motosports.
@keganromero20873 жыл бұрын
Thank you!! Just installed mine and it looks SO much better!! This video walked me through the whole thing! THANKS!
@madkandi6 жыл бұрын
Just followed this video. Took me about an hour. Very simple. Thank you
@Shawner5566 жыл бұрын
Wow. Incredibly thorough video. I'll definitely be buying this kit from you guys when I'm ready for my Ninja 650!
@letmebehomie61857 жыл бұрын
Done. Super easy, and looks waaaaaay better. Straight up just follow the video. It's literally easier than expected.
@VagabondMotorsports
7 жыл бұрын
Glad to hear it! Thank you for your business!
@MetalEd3125 жыл бұрын
2018 Ninja 650. Excellent look, very easy to install. I took my time and only took 30 min. The look is excellent, compared to other (over $100 products) I think this is better quality and design for a better price. Keep it up Vegabond!!! Very happy customer here.
@LordWill07222 жыл бұрын
This video worked flawless on my new 2022 Ninja 650. Thanks so much for the detailed guide ❤️
@raphaelvanloock6908 Жыл бұрын
A big thank you for the Step by step video ! Without experience I resolve it on my own.
@Tobeon24 жыл бұрын
The best step by step instructional video clip. Thank you so much!!!
@HardEarnedBacon4 жыл бұрын
Installed on my 2020 Z650 today. Had to modify it and open up the center hole with a dremel because the turn signal connectors on the 2020 are much larger. Otherwise it’s great, huge improvement.
@YT13447 жыл бұрын
Bought it right after watching the video. Watched it one more time and installed in less than an hour without any problem. Thanks, Great item btw (Y)
@sameerkvaidya337 жыл бұрын
Very neat instructions. I just installed and it looks beautiful. Thank you
@denouden927 жыл бұрын
Thank you! This video made the whole process seamless. Definitely would recommend this well made product to anyone out there that is looking for a fender eliminator kit.
@Wabbit19616 жыл бұрын
Thank God! Someone finally making a tail tidy that doesn't involve cutting the factory harness! IMO the weakest link. So many people don't seal the connectors properly and down the road it leads to stator and rectifier failure. Plus most kits use thinner gauge wire which alters the resistance, which leads to said problems.
@pc4him Жыл бұрын
Thank you for the video! Very helpful and detailed.
@primeh6137 жыл бұрын
Amazing video. Thank you!
@briancolica65426 жыл бұрын
Great video and nice product. Will be ordering one soon.
@yumekocha99232 жыл бұрын
Big Thank you for this video, made the job very easy!
@harri58924 жыл бұрын
best video ive seen. amazing step by step.
@DeathAwaitsYourSoul5 жыл бұрын
Love the Vid. Helped me out lots!!!!!
@premiermanutencaopredial71552 жыл бұрын
Very good !!! Excelent explanation !
@kyfy243 жыл бұрын
So incredibly helpful. Thanks so much
@abhijitchaugule94634 жыл бұрын
Amazing video Bike looks pretty cool
@zakharpedalkin37642 жыл бұрын
Best tutorial on KZread
@Speedm962 жыл бұрын
For anyone looking for 2021 model. Everything fits. The only issue is on 19:45 when he feeds the cables trough the whole which is a must. No way around it. The cable connecters are to big. The hole is small. What i did grabbed a drill and a twist drill bit and I made the hole bigger. It is hidden so can’t see unless you stick your head between the tail light and tire. Other than that everything is like the video. Love how it looks now.
@VagabondMotorsports
Жыл бұрын
To add a note here, this was true but we have revised our design to work without modification on the newer models
@gregswiatek5156 жыл бұрын
Installed it today, all was perfect thank you ! Ordered on Amazon in Germany =)
@VagabondMotorsports
6 жыл бұрын
Great! Thank you so much for your business!
@johntucker237 жыл бұрын
You'd think that bike manufacturers would have learned that this is the way to go straight out the factory by now...
@micahpalmer3537
7 жыл бұрын
DOT and other equivalents require that ungodly contraption on the back of the bike from the mfg, health & safety and all.
@Riley_1955
4 жыл бұрын
@@micahpalmer3537 Just goes to prove once again that DOT and equivalents are idiots as far as what the public want and need from their products.
@vitalogypj7 жыл бұрын
I actually kinda like this one better than the R&G one, although the r&g has a rubber thingy where the cables pass through from the plate to the inside the bike which kinda makes it resistente do water/mud.
@Lemmings725 жыл бұрын
Hi, looks good and easy to fit, one question about water spray and muck, does the reduction in cover from the rear of the bike mean that more dirt is sprayed up the riders back in bad weather, I plan to ride my 2018 Z650 all year round.
@PlaytimeParadise963 жыл бұрын
this guy is amazing!
@mfmclain4 жыл бұрын
This was super helpful! I love the kit, but the hole for the wires needs to be bigger for the 2020 model, since they changed the turn signal plugs.
@juniorc.4311
4 жыл бұрын
Were you able to get this to work with a 2020 model? If so, Did you have to make some sort of modification to this kit? I’m looking to get a kit for my 2020 but can’t seem to find that doesn’t have this problem.
@mfmclain
4 жыл бұрын
Junior C. Yes. Just had to make the hole slightly bigger for the larger plugs. Other than that, everything else worked perfect and looks awesome!
@mfmclain
2 жыл бұрын
@Looby yeah. Used a Dremel and made it a bit bigger.
@VagabondMotorsports
Жыл бұрын
To add a note here, this was true but we have revised our design to work without modification on the newer models
@lukegader5211Ай бұрын
Will this fit my 2023 ninja 650 now that the turn signals are LED from factory?
@shauncurran33583 жыл бұрын
Do you know if the kawasaki under seat u lock will still fit under seat with this tail tidy fitted ?
@evanmcdonald55592 жыл бұрын
Great video.
@leynadIX3 жыл бұрын
Do you notice in some way the fender eliminator kit? Like with dirt in your back, or in sound, or something I can't imagine?
@gakarot026 жыл бұрын
Where can we find the flasher relay for z650 .... i have to replace it cuz i have installed a led trun signals plz help...im not able to find it.
@zeginsmellara62376 жыл бұрын
will this fender eliminator keep away the water and dirt from our back?
@tech30six7 жыл бұрын
Got mine on order for a 17 z650.
@matt80317 жыл бұрын
Installation was SUPER simple. Watched the video once, ordered it instantly, waited 3 days, 2hrs to install it (without the video help and talking to a neighbor) I got it done! Very pleased and started speaking to my customers about Vagabond's products (I work in a Motorsports Dealership). One question... will you guys be making frame sliders/clutch and break levers? I'd really like to order some from you guys, you have my business!
@VagabondMotorsports
7 жыл бұрын
Thanks for the comment! We will not be making any more parts for this motorcycle.
@nickperry22524 жыл бұрын
I wish I would have seen this video 3 days ago but I didnt and I did something stupid and spliced the wires...now of course my flashers dont work at all but my plate light still works. Any suggestions on how to get them back working?
@MrBakerman966 жыл бұрын
You should have some screws left over right? Just double checking I didn’t hear it in the video (more then the screws that held the old fender up)
@broderp4 жыл бұрын
Almost perfect. In some places, the side reflectors are a requirement. If a version of these would be able to incorporate them then it would 100% legal. (Assuming the need for a rear fender is not a legal requirement in itself) Also very surprised that the fender is all plastic on the 650. The Z400 has a metal sub frame and appears more substantial.
@Penafort5 жыл бұрын
Can we still use the back top case with this mode?
@quangstars4 жыл бұрын
Can you use aftermarket indicators with these?
@roverlacai31024 жыл бұрын
Thanks now I can get rid of this ugly factor fender on my own . Great video
@garyboyce61866 ай бұрын
Wow what a great step by step hands down the best I’ve seen on KZread for explaining anything. Great camera work as I was able to see everything you did. I might not be able to do this because ordering givi side cases and top case for touring. I don’t think it will fit where the signals land. Suggestions as I hate that original fender? I guess my only questions why oh why do manufacturers make these beautiful machines with extremely ugly useless fenders. Why don’t these come out of production like this?
@mauriciorosales99924 жыл бұрын
This video is for a 2017 Kawasaki 650 would that fender eliminator work on a 2014 Kawasaki as well ??
@AdeyMC3 жыл бұрын
Whats the name of this exact kit? I bought another one and my blinkers dont fit :/
@i957412 жыл бұрын
Thanks for sharing🙏
@robertsalyers13514 жыл бұрын
Very nice, thanks
@APtS_Gh0stHunt3R2 жыл бұрын
will this fit in the 2020+ models? also where can I buy this?
@fiwarelli7 жыл бұрын
What`s the weight vs the old one?
@R3alTalkz5 жыл бұрын
Will this fit my Ninja EX650 2018?? If so, where can I order this? Will buy it ASAP if it fits.
@MarioGonzalez-km2ql2 жыл бұрын
Does it fit in a 2020 Kawasaki 650 abs ?
@khrisfit39444 жыл бұрын
Will this fit the 2020 ninja 650?
@cindyshigs65802 жыл бұрын
Despite being 4-years old, this video is still VERY helpful. One thing I'd like to see is how to deal with the electrical if you want to use your own licence plate light and signals. My 2021 Ninja 650 model has these electrical plastic connector-doo-hickeys and I have NO idea how to work around them. Do I need to buy new electrical plastic connector-doo-hickeys? In the meantime, I followed the video and replaced my fender using the stock lights. Thank you for this great video!
@bikecommuter96435 жыл бұрын
Is this good for the 2018 model ?
@garydeighan46536 жыл бұрын
Do you make one for a 2016 ninja 650?
@DANIELSAM3294 жыл бұрын
Do I have to buy the LED separated??
@jurisbaranovskis4915 Жыл бұрын
Thanks a lot !! :)
@anthoncasenello90436 жыл бұрын
i need fender elimanator for my kasawaki ninja 400 how can i order vegabond.
@iMrBuzZ6 жыл бұрын
Do you ship to Viet Nam? And how can I buy this ?
@markporter26427 жыл бұрын
Will you guys be making one for the 2017 Kawasaki Z900?
@VagabondMotorsports
7 жыл бұрын
yes! It is currently out of stock, but will be back in stock June 28th. You can order now from our website. www.vagabondmotorsports.com
@mihaiserban92402 жыл бұрын
im from uk , where can i buy it from ? thank you
@TKLMotoVlog4 жыл бұрын
For that one screw, you can get a ratchet attaching a Phillip bit and access it through the back. Simple.
@Wolfy29297 жыл бұрын
Do you ship to Canada?
@westars08232 жыл бұрын
For what ever reason I’m having issues putting that 4mm Allen head key bolt back to but the side fenders back together. That’s literally the last part for me🙄
@feardafish3 жыл бұрын
Will these be back in stock eventually?
@johntucker237 жыл бұрын
Do these work on Uk bikes to? not sure if our plates or fittings are different.
@VagabondMotorsports
7 жыл бұрын
Yes, our fender eliminators fit UK plates. You may notice that where the plate mounts has space to accommodate a variety of different license plates.
@DreezyMango7 жыл бұрын
That is the best looking one I've seen so far! Would they fit Australian plates?
@VagabondMotorsports
7 жыл бұрын
Our fender eliminators are absolutely compatible with Aussie Plates :)
@Rastei Жыл бұрын
How can i buy this in europe? any dealer here?
@ThijsK955 жыл бұрын
What are the sizes? In milimeters please...
@yashrajchhabra19927 жыл бұрын
Where can I buy this in India ?
@PhoenixAtFire6 жыл бұрын
Where to buy this in India?
@jasonbrubaker18354 жыл бұрын
Love the product except that I had to drill the square space to run the wires thru on top to fit the connectors on my 2020 model
@raypark222
3 жыл бұрын
I agree. The 2020 Ninja 650 has larger connectors and will not fit through the access hole. Grinding the hole larger was not easy either as the aluminum was very tough. Very nice unit otherwise.
@VagabondMotorsports
Жыл бұрын
To add a note here, this was true but we have revised our design to work without modification on the newer models
@rafaellara41223 ай бұрын
I need to order mine
@jeremyoliphant7 жыл бұрын
You guys should make one for the 2017 Z900. This one may work, not sure. I do know I need a fender eliminator.
@VagabondMotorsports
7 жыл бұрын
it is in the works!
@CraznessTV
7 жыл бұрын
How about 2017 z1000 one ?
@coreyconnors314 жыл бұрын
cant seem to find it on Amazon Canada, and not 100% sure it will go on the 2020 ninja 650 i just bought... lil help? lol
@Talan274
4 жыл бұрын
it won't. the hole at the top is too small for the new 2020 plugs. kemimoto has one with a bigger hole on the top that I just ordered.
@chuki35007 жыл бұрын
Its compatible with european plates?
@VagabondMotorsports
7 жыл бұрын
Alejandro Ruiz yes, it is!
@chuki3500
7 жыл бұрын
Thanks!!
@BenalRida
5 жыл бұрын
Do you know if the installation of this kit is legal in Spain, also you said the size will fit Spanish plates, right?
@sebastianguevararodriguez6402 Жыл бұрын
When are you releasing this fender eliminatore for 2022 Ninja 650?
@VagabondMotorsports
Жыл бұрын
This part will also work on the Ninja 650 model
@joue045 жыл бұрын
donde se pueden comprar??
@madarchermoto49552 жыл бұрын
I have a 2022 ninja 650 ABS and the square hole in the product that you feed the 3 wires through is too small for my connectors. I guess on the 2022’s they used fatter wire connectors? Not a big deal, I used a Dremel and bored out the hole to be roughly 30% bigger and fed them through and you obviously can’t see it when installed on the bike. But if you’re reading this and you own a 2022 650 ABS you won’t be able to feed your connectors through unless you do what I did. To the company, I suggest making that cutout in your product maybe 40% bigger so the new connectors Kawasaki seems to be using will fit through. But all in all a GREAT product and it looks AMAZING on my bike!!! And this video was an awesome step by step video as well.
@VagabondMotorsports
2 жыл бұрын
Hi DW, thank you for the detailed comment and bringing this up. We have ordered a set of the newer OEM lights and will update the design to better accommodate the newer models.
@benjaminkirk8815
Жыл бұрын
@@VagabondMotorsports can I please get a link to buy one? 2022 Z650 ABS. Thanks
Wow what a great step by step hands down the best I’ve seen on KZread for explaining anything. Great camera work as I was able to see everything you did. I might not be able to do this because ordering givi side cases and top case for touring. I don’t think it will fit where the signals land. Suggestions as I hate that original fender? I guess my only questions why oh why do manufacturers make these beautiful machines with extremely ugly useless fenders. Why don’t these come out of production like this?
@Talan2744 жыл бұрын
Won't work with the 2020. The hole on the top is too small for the new plugs to go through.
@MoeOthman
4 жыл бұрын
Talan I just undid my entire bike and had the same issue (2020 z650). So frustrated
@dwatson901
4 жыл бұрын
Just make the whole a little bigger with a drill
@trifonehawk42846 ай бұрын
will this work on a 23 z650?? anyone know
@VagabondMotorsports
6 ай бұрын
Yes it will!!
@stevenmiller3242 жыл бұрын
You are missing the red reflectors that were originally on the fender. I think it's against the the law to remove those.
Пікірлер: 149
One of the best "step by step" videos ever made. Very good, very clean. Kind regards from Portugal 😉
Fantastic product! I supervised my 17 year old son install this in under an hour going step by step with this video. Factory quality (probably better), excellent fit and finish, and I liked that Vagabond utilized the factory parts without cutting and splicing. Perfect addition to my 2017 Ninja 650 ABS.
Watched this and ordered the product. Saw it go from San Diego to Bell Gardens to Santa Fe Springs to LA to Tokyo and finally to Melbourne Aust. It arrived today and so I rewatched the video and it is done. Easiest install video to watch and follow and the fender eliminator is a great product. LOVE IT!!!!
I’m OCD! Get that little piece of plastic out from under the seat! Haha great video. Very informative.
Thank you. Just finished my 22 Z650 thanks to your video. Didn't think I could do it but, super easy
Installed this badboy last night on a 19 z650 - fookin' tail light rubber grommit was the hardest part. Now it looks fabulous.
I accidentally found this video just after doing all this job in my bike. Very instructive, very objective and professional. A little bit long, but still good. I add a little hint for extracting that last screw that holds the fender, by extracting other two 8mm bolts in the front (under the driver seat), and then slide back a little bit the big black plastic part, allowing you to use the phillips screw driver in an easier way to release the fender. Thank you.
This a great and well thought out video, made switching my stock fender with your guys' super easy!
Followed it step by step and it could not have been any clearer! Awesome Job!
Wow, what a great video. So clean and clear about every single detail. Getting my plasma blue 2018 in a few days and think this is going to be a gimme.
Installed on my 2019 ninja 650 ABS, perfect fit. Really clean look. Super easy install. Highly recommend over these other $100+ fender eliminator kits. Installation time was about 45 minutes but that’s because it was my first time ever working on a motorcycle so I kept pausing and playing this video. Could very easily be a 30 minute or less install
@JQUICK21
4 жыл бұрын
How do you like your bike? Might be getting one real soon...same year and the orange ABS model....is the seat comfortable? Anything you don't like?
@waterbuffalo38
4 жыл бұрын
QUICK-STAR I love it, it’s very comfortable to ride. And very easy to maneuver. Only thing I don’t like is you can’t use a ram mount for your phone in the fork stem because it’s not a round hole it’s a hexagon hole. But I’ve found an adapter that works perfectly with it to mount my phone I can send you the link if you’d like. Overall it’s a great bike in my opinion
Great quality product and fairly simple installation. Thank you for this video!
Good in depth video but I prefer clear and short instructional videos. Would definitely purchase this product.
Thank goodness for this video! Couldn't have done it without it, that small hidden screw had us baffled! Thanks guys!!
I installed mine on my z650 and fits really well! Easy video tutorial to follow
Great product. I highly recommend this fender eliminator. I got same day shipping for free from amazon and installed it today on my 2017 Kawasaki Ninja 650. Quick and simple installation. Thanks Vegabond Motosports.
Thank you!! Just installed mine and it looks SO much better!! This video walked me through the whole thing! THANKS!
Just followed this video. Took me about an hour. Very simple. Thank you
Wow. Incredibly thorough video. I'll definitely be buying this kit from you guys when I'm ready for my Ninja 650!
Done. Super easy, and looks waaaaaay better. Straight up just follow the video. It's literally easier than expected.
@VagabondMotorsports
7 жыл бұрын
Glad to hear it! Thank you for your business!
2018 Ninja 650. Excellent look, very easy to install. I took my time and only took 30 min. The look is excellent, compared to other (over $100 products) I think this is better quality and design for a better price. Keep it up Vegabond!!! Very happy customer here.
This video worked flawless on my new 2022 Ninja 650. Thanks so much for the detailed guide ❤️
A big thank you for the Step by step video ! Without experience I resolve it on my own.
The best step by step instructional video clip. Thank you so much!!!
Installed on my 2020 Z650 today. Had to modify it and open up the center hole with a dremel because the turn signal connectors on the 2020 are much larger. Otherwise it’s great, huge improvement.
Bought it right after watching the video. Watched it one more time and installed in less than an hour without any problem. Thanks, Great item btw (Y)
Very neat instructions. I just installed and it looks beautiful. Thank you
Thank you! This video made the whole process seamless. Definitely would recommend this well made product to anyone out there that is looking for a fender eliminator kit.
Thank God! Someone finally making a tail tidy that doesn't involve cutting the factory harness! IMO the weakest link. So many people don't seal the connectors properly and down the road it leads to stator and rectifier failure. Plus most kits use thinner gauge wire which alters the resistance, which leads to said problems.
Thank you for the video! Very helpful and detailed.
Amazing video. Thank you!
Great video and nice product. Will be ordering one soon.
Big Thank you for this video, made the job very easy!
best video ive seen. amazing step by step.
Love the Vid. Helped me out lots!!!!!
Very good !!! Excelent explanation !
So incredibly helpful. Thanks so much
Amazing video Bike looks pretty cool
Best tutorial on KZread
For anyone looking for 2021 model. Everything fits. The only issue is on 19:45 when he feeds the cables trough the whole which is a must. No way around it. The cable connecters are to big. The hole is small. What i did grabbed a drill and a twist drill bit and I made the hole bigger. It is hidden so can’t see unless you stick your head between the tail light and tire. Other than that everything is like the video. Love how it looks now.
@VagabondMotorsports
Жыл бұрын
To add a note here, this was true but we have revised our design to work without modification on the newer models
Installed it today, all was perfect thank you ! Ordered on Amazon in Germany =)
@VagabondMotorsports
6 жыл бұрын
Great! Thank you so much for your business!
You'd think that bike manufacturers would have learned that this is the way to go straight out the factory by now...
@micahpalmer3537
7 жыл бұрын
DOT and other equivalents require that ungodly contraption on the back of the bike from the mfg, health & safety and all.
@Riley_1955
4 жыл бұрын
@@micahpalmer3537 Just goes to prove once again that DOT and equivalents are idiots as far as what the public want and need from their products.
I actually kinda like this one better than the R&G one, although the r&g has a rubber thingy where the cables pass through from the plate to the inside the bike which kinda makes it resistente do water/mud.
Hi, looks good and easy to fit, one question about water spray and muck, does the reduction in cover from the rear of the bike mean that more dirt is sprayed up the riders back in bad weather, I plan to ride my 2018 Z650 all year round.
this guy is amazing!
This was super helpful! I love the kit, but the hole for the wires needs to be bigger for the 2020 model, since they changed the turn signal plugs.
@juniorc.4311
4 жыл бұрын
Were you able to get this to work with a 2020 model? If so, Did you have to make some sort of modification to this kit? I’m looking to get a kit for my 2020 but can’t seem to find that doesn’t have this problem.
@mfmclain
4 жыл бұрын
Junior C. Yes. Just had to make the hole slightly bigger for the larger plugs. Other than that, everything else worked perfect and looks awesome!
@mfmclain
2 жыл бұрын
@Looby yeah. Used a Dremel and made it a bit bigger.
@VagabondMotorsports
Жыл бұрын
To add a note here, this was true but we have revised our design to work without modification on the newer models
Will this fit my 2023 ninja 650 now that the turn signals are LED from factory?
Do you know if the kawasaki under seat u lock will still fit under seat with this tail tidy fitted ?
Great video.
Do you notice in some way the fender eliminator kit? Like with dirt in your back, or in sound, or something I can't imagine?
Where can we find the flasher relay for z650 .... i have to replace it cuz i have installed a led trun signals plz help...im not able to find it.
will this fender eliminator keep away the water and dirt from our back?
Got mine on order for a 17 z650.
Installation was SUPER simple. Watched the video once, ordered it instantly, waited 3 days, 2hrs to install it (without the video help and talking to a neighbor) I got it done! Very pleased and started speaking to my customers about Vagabond's products (I work in a Motorsports Dealership). One question... will you guys be making frame sliders/clutch and break levers? I'd really like to order some from you guys, you have my business!
@VagabondMotorsports
7 жыл бұрын
Thanks for the comment! We will not be making any more parts for this motorcycle.
I wish I would have seen this video 3 days ago but I didnt and I did something stupid and spliced the wires...now of course my flashers dont work at all but my plate light still works. Any suggestions on how to get them back working?
You should have some screws left over right? Just double checking I didn’t hear it in the video (more then the screws that held the old fender up)
Almost perfect. In some places, the side reflectors are a requirement. If a version of these would be able to incorporate them then it would 100% legal. (Assuming the need for a rear fender is not a legal requirement in itself) Also very surprised that the fender is all plastic on the 650. The Z400 has a metal sub frame and appears more substantial.
Can we still use the back top case with this mode?
Can you use aftermarket indicators with these?
Thanks now I can get rid of this ugly factor fender on my own . Great video
Wow what a great step by step hands down the best I’ve seen on KZread for explaining anything. Great camera work as I was able to see everything you did. I might not be able to do this because ordering givi side cases and top case for touring. I don’t think it will fit where the signals land. Suggestions as I hate that original fender? I guess my only questions why oh why do manufacturers make these beautiful machines with extremely ugly useless fenders. Why don’t these come out of production like this?
This video is for a 2017 Kawasaki 650 would that fender eliminator work on a 2014 Kawasaki as well ??
Whats the name of this exact kit? I bought another one and my blinkers dont fit :/
Thanks for sharing🙏
Very nice, thanks
will this fit in the 2020+ models? also where can I buy this?
What`s the weight vs the old one?
Will this fit my Ninja EX650 2018?? If so, where can I order this? Will buy it ASAP if it fits.
Does it fit in a 2020 Kawasaki 650 abs ?
Will this fit the 2020 ninja 650?
Despite being 4-years old, this video is still VERY helpful. One thing I'd like to see is how to deal with the electrical if you want to use your own licence plate light and signals. My 2021 Ninja 650 model has these electrical plastic connector-doo-hickeys and I have NO idea how to work around them. Do I need to buy new electrical plastic connector-doo-hickeys? In the meantime, I followed the video and replaced my fender using the stock lights. Thank you for this great video!
Is this good for the 2018 model ?
Do you make one for a 2016 ninja 650?
Do I have to buy the LED separated??
Thanks a lot !! :)
i need fender elimanator for my kasawaki ninja 400 how can i order vegabond.
Do you ship to Viet Nam? And how can I buy this ?
Will you guys be making one for the 2017 Kawasaki Z900?
@VagabondMotorsports
7 жыл бұрын
yes! It is currently out of stock, but will be back in stock June 28th. You can order now from our website. www.vagabondmotorsports.com
im from uk , where can i buy it from ? thank you
For that one screw, you can get a ratchet attaching a Phillip bit and access it through the back. Simple.
Do you ship to Canada?
For what ever reason I’m having issues putting that 4mm Allen head key bolt back to but the side fenders back together. That’s literally the last part for me🙄
Will these be back in stock eventually?
Do these work on Uk bikes to? not sure if our plates or fittings are different.
@VagabondMotorsports
7 жыл бұрын
Yes, our fender eliminators fit UK plates. You may notice that where the plate mounts has space to accommodate a variety of different license plates.
That is the best looking one I've seen so far! Would they fit Australian plates?
@VagabondMotorsports
7 жыл бұрын
Our fender eliminators are absolutely compatible with Aussie Plates :)
How can i buy this in europe? any dealer here?
What are the sizes? In milimeters please...
Where can I buy this in India ?
Where to buy this in India?
Love the product except that I had to drill the square space to run the wires thru on top to fit the connectors on my 2020 model
@raypark222
3 жыл бұрын
I agree. The 2020 Ninja 650 has larger connectors and will not fit through the access hole. Grinding the hole larger was not easy either as the aluminum was very tough. Very nice unit otherwise.
@VagabondMotorsports
Жыл бұрын
To add a note here, this was true but we have revised our design to work without modification on the newer models
I need to order mine
You guys should make one for the 2017 Z900. This one may work, not sure. I do know I need a fender eliminator.
@VagabondMotorsports
7 жыл бұрын
it is in the works!
@CraznessTV
7 жыл бұрын
How about 2017 z1000 one ?
cant seem to find it on Amazon Canada, and not 100% sure it will go on the 2020 ninja 650 i just bought... lil help? lol
@Talan274
4 жыл бұрын
it won't. the hole at the top is too small for the new 2020 plugs. kemimoto has one with a bigger hole on the top that I just ordered.
Its compatible with european plates?
@VagabondMotorsports
7 жыл бұрын
Alejandro Ruiz yes, it is!
@chuki3500
7 жыл бұрын
Thanks!!
@BenalRida
5 жыл бұрын
Do you know if the installation of this kit is legal in Spain, also you said the size will fit Spanish plates, right?
When are you releasing this fender eliminatore for 2022 Ninja 650?
@VagabondMotorsports
Жыл бұрын
This part will also work on the Ninja 650 model
donde se pueden comprar??
I have a 2022 ninja 650 ABS and the square hole in the product that you feed the 3 wires through is too small for my connectors. I guess on the 2022’s they used fatter wire connectors? Not a big deal, I used a Dremel and bored out the hole to be roughly 30% bigger and fed them through and you obviously can’t see it when installed on the bike. But if you’re reading this and you own a 2022 650 ABS you won’t be able to feed your connectors through unless you do what I did. To the company, I suggest making that cutout in your product maybe 40% bigger so the new connectors Kawasaki seems to be using will fit through. But all in all a GREAT product and it looks AMAZING on my bike!!! And this video was an awesome step by step video as well.
@VagabondMotorsports
2 жыл бұрын
Hi DW, thank you for the detailed comment and bringing this up. We have ordered a set of the newer OEM lights and will update the design to better accommodate the newer models.
@benjaminkirk8815
Жыл бұрын
@@VagabondMotorsports can I please get a link to buy one? 2022 Z650 ABS. Thanks
@VagabondMotorsports
Жыл бұрын
@@benjaminkirk8815 www.vagabondmotorsports.com/collections/kawasaki-z650-ninja-650-2017/products/kawasaki-z650-ninja-650-2017-fender-eliminator
@garyboyce6186
6 ай бұрын
Wow what a great step by step hands down the best I’ve seen on KZread for explaining anything. Great camera work as I was able to see everything you did. I might not be able to do this because ordering givi side cases and top case for touring. I don’t think it will fit where the signals land. Suggestions as I hate that original fender? I guess my only questions why oh why do manufacturers make these beautiful machines with extremely ugly useless fenders. Why don’t these come out of production like this?
Won't work with the 2020. The hole on the top is too small for the new plugs to go through.
@MoeOthman
4 жыл бұрын
Talan I just undid my entire bike and had the same issue (2020 z650). So frustrated
@dwatson901
4 жыл бұрын
Just make the whole a little bigger with a drill
will this work on a 23 z650?? anyone know
@VagabondMotorsports
6 ай бұрын
Yes it will!!
You are missing the red reflectors that were originally on the fender. I think it's against the the law to remove those.