Kel-Tec SU-16 Field Strip
Спорт
Detailed take down and field strip of the Kel-Tec SU-16a. The instructions here should be applicable to taking down any SU-16 series rifle. The field strip for this rifle is moderately involved. Simple hand tools like a hammer and punch can make it easier.
Пікірлер: 49
Thank you for not going on any tangents while breaking your rifle down. Quick, detailed, and no bulls#!t. Perfect
Very helpful vid. My guess would be Kel-Tec was aiming to keep the weight ridiculously low with their gas-tube design.
Thank you for such an easy video and its explained very well, especially with taking down the gas tube.
First of all, Thanks for the video. It is MUCH better than the documentation provided with the rifle. There are few more review videos now. I have been following this rifle for a long time. I have seen the improvements to it and now find it is worth getting for me. I like niche guns. BUT, one has to remember this is not a combat rifle, or a target rifle. You can use it for hunting up to the limitations of the rifle. You can also use it for plinking or as a truck/camping/survival rifle. Best of all, you don't need (in Minnesota) a permit to purchase this rifle since it does not have a lot of the "black features."
@bobvog7123
4 жыл бұрын
I agree. Nice gun, but not an AR15 in terms of durability. The weak point is the plastic hinge.
Great vid of a gun that I took to the range for the first time today. First .223 I'd fired, and that spicy round semi-automatic, plus the innovative design of the Kel-Tec, made it instantly my go-to rifle for the bush and home defense.
I haven’t taken mine apart in awhile thanks for the how to reminder
Great vid very straight forward and with the right amount of detail!!!!!
sir that is the most helpful video regarding the su 16 rifle I have ever seen, thank you
@Kondition1
10 жыл бұрын
Thanks! Not much info available or known about these so I thought I'd share. :)
@wingus79
10 жыл бұрын
KONDITION1 well I am glad that you did those guns are neat
I was wondering how the SU-16 operated and now I know! That you got the disassemble & reassembly video!
I gave myself a tiny blood blister, but I figured it out.. Awesome video, my man.
Thank you for the good teardown video of the SU16. The book that comes with the rifle does not suffice, in fact, it's rather confusing. I think a video is in order and this one does the trick.
@Kondition1
9 жыл бұрын
distortionwarrior no problem!
thankyouthankyouthankyouthankyou! I thought I was never going to get my bolt carrier forward again after it's initial cleaning. Whew!
@Kondition1
8 жыл бұрын
+quigsthevicious glad it helped! Kinda tricky little gun.
Thank you. That was a big help. God Bless you.
Nice Rifle and good instructional video
Nice vid and great take-down.
Great video , thanks for the info
Nice job.
Thanks a lot for this video. Would you do another video where you break it down and then show your process for cleaning and exactly which parts you lube? I'm new to rifle maintenance and would really appreciate advice on how to properly clean and oil the SU-16.
@Kondition1
8 жыл бұрын
+YomYestreen I clean and oil the actual bolt itself and clean the barrel. That's about it. You can throw some oil on the pins for future take down ease.
@YomYestreen
8 жыл бұрын
+Kondition1 Okay, thanks for the reply. That sounds easy enough.
Good job
What I'd like to know is how often the gas system should be cleaned. I just put 40 rounds through mine (brand new) a few days ago and just did the barrel and bolt cleaning.
Nice, helpful video! Dont think you would want to field strip in the field. Lots of little bits to loose
"ONWARDS TO FREEDOM" -Firing Pin
Thanks for the vid, sofar I'm loving my Kel, but she needs a cleaning....
That was the funniest thing I have heard in along time; I have to push one tab at a time. Lmfao little girl hands hahaha. Thanks for the laugh and making the video so I can show my nephew how easy this gun is to take down without having to drive over and show him on my gun. + You gave him a good laugh too
I just picked one up,, nice video. My charging handle is not the same as yours. It's like a wedge. It's fun to shoot. Thanks
would it be enough to put the whole gas tube assembly into an ultrasonic cleaner without taking it apart?
By no fault of my own I discovered that you can unscrew the piston rod from the bolt carrier. This seems much easier to deal with than popping out a tiny pin. On a side note, I seen some vids where the bolt smacked the rear of the receiver and broke it out. Seems to happen when using 5.56. Would replacing the recoil spring with a slightly stiffer one help prevent this? One guy didnt get any response from Kel Tec at all. That is surprising.
@Kondition1
8 жыл бұрын
+Bounty B. Wolf That's a pretty good find on the unscrewing the piston. That pin is a pain. Replacing the springs with a stiffer one may help if that's an issue. Just have to make sure it doesn't effect cycling in both 223 and 556. I'm sure a lot of owners would upgrade just to have peace of mind.
@leadpelletinass
8 жыл бұрын
+Kondition1 Bought a new spring and thicker butt stock pad from Kel Tec. I'm going to replace the solid metal pin on the piston with a roll pin so it stays put. Seems like some glue or something on the bolt carrier was supposed to keep the piston from unscrewing. Welding would work better. Shot fine until it warmed up and started having extraction issues. Dirty chamber. Brake cleaner and a stiff .223 chamber brush plus a .223 bore snake. Its all clean now. Going to try brass and if it cycles a couple mags without issues then trying steel again and see if the same problem returns. Older steel had a varnish coating. newer steel has a polymer, supposed to be more resistant to melting and causing extraction issues. Id rather shoot steel and pay $100 less per 1000 rounds.
Hey do you know if you or someone has a video on proper Lubing and cleaning of the completely disassembled SU-16A
@Kondition1
8 жыл бұрын
+jeffa1961 If you go to Keltec's website, under the RESOURCES tab > DOWNLOADS, there is a PDF of the owners manual. It's all outlined in there for lubing and cleaning.
@jeffa1961
8 жыл бұрын
+Kondition1 Thank you. I did and it was a help. Appreciate that.
Why does my spring pressure remain high? In other words you can't remove the charging handle.
How is it today? Can you still recommend it?
How do you remove the buttstock?
The booklet is garbage this is a hell of a lot better
For the slow kids in the class like me, I need arrows pointing to exactly where the "tabs", and other areas of the rifle that are critical for assembly. With an all black rifle it is hard for the viewer(lighting?) to contrast the small intricate parts like the cam and when you were taking the charging handle on and off. Again, that's just me. Otherwise I liked your video.
Wish you did a better job showing what you’re talking about
Horrible firearms I’d rather own a hi point. Buy an AR, don’t need to reinvent the wheel.
Foolish operation foolish engineering
This is a sorry excuse for a firearm