I just did my own but with an improvement. I placed an 1156 socket so that way when the bulb goes out it's just a swap.

@elvislee7686

2 жыл бұрын

Did the socket fit right in the pvc pipe?

@iklink

Жыл бұрын

Can you please post socket?

the armor all cap is absolutely brilliant.

@FishinNStuff

Жыл бұрын

Thank you lol

This is an awesome idea. I have watched lots of kayak videos and this is one of the best kayak improvements I have seen.

@FishinNStuff

5 жыл бұрын

Thank you Sir , I've got another video on just the nav light like I was saying in the video , and I'm getting ready to make another video about a cool kayak DIY idea I had so click the bell or just check back by buddy I think you like it as well . I appreciate you commenting I love feed back and I appreciate you watching as well

I am getting into kayak fishing. I have two Lightning Strikes ordered. My wife wouldn’t go for me getting one unless I got a extra one for my Son or someone else. My Late Fathers best friend died while fishing by hisself and he didn’t go for fishing alone. This is a great idea and I am subscribed to your videos. I am just blown away by how many people share ideas. I think this is why I am drawn to this sport. Thank you for your great ideas. Learning a lot and boats hasn’t come in yet. Hope I got a good one!

@FishinNStuff

4 жыл бұрын

That's awesome man , I go by myself on a kayak sometimes . But I've never been at night by myself . I've also never flip mine but almost did once . Always go with someone at least till you get comfortable any type boating can be dangerous

Solid work!! Crazy how stuff is almost made to fit other stuff. If you ever have a plastic gas can and lose the cap to the end of the plastic tube a 3/4" PVC cap fits perfect. I've been using one for 10 years and haven't lost it yet.

@FishinNStuff

5 жыл бұрын

That's a handy tip brother, I appreciate you watching and commenting

Thank you so much for this idea. I made this over the last week. I'm impressed with it and your design.

👍🏼#5..... That adds light to the situation for sure and you explained it well enough to make it simple....

@FishinNStuff

5 жыл бұрын

Thank you brother you know how it is on here you get better as you go . I learned some stuff from the first video I did, it helped me know what I needed ti cover better . I appreciate you brother

@SK_CrappieCatching

5 жыл бұрын

@@FishinNStuff When I get my yak I'll be adding one of these for sure..... Think I'll use a three way switch though.....

@FishinNStuff

5 жыл бұрын

You getting a kayak 😯 heck yeah man they are fun but boats are too lol

As always, great video and great idea! My sons and I watch your videos daily to help us add to our fishing fun! Really can’t thank you enough!

@FishinNStuff

4 жыл бұрын

Yes Sir , and thank you for watching and tell your sons Fishin N Stuff said thank you to them too

Dude, you are the man. Another great idea and build that outperforms anything that you could buy. I am in the middle of making mine. I went with a 1" PVC pipe for the LED strip light to wrap around. I also used a 4 way 1/2" T, and added two switches, one for the strip lights and one for the Nav light. I don't have a 12V battery yet, tried my house alarm's 12V battery, but it is so old that it is only kickin' out 7.56V! So I wired my lighting up to the alarm system where the 12V battery would otherwise be connected to. I did this to ensure that all my wire to wire and wire to switch connections were solid before gluing everything together. I bought LED strip lights that had a plug style connection, so I just grabbed an old charger of some sort that fit the LED, and it works great.

Man do I love watching your videos! This is going to be my new nav light for my Jon boat... *Thank You* for sharing all that you do!!!

Really enjoyed the video going to give it a try. Have a good day and stay safe Jimmy from Massachusetts

@FishinNStuff

5 жыл бұрын

Awesome man you can do it , and it doesn't take that long really , it takes longer when you trying to make a video while making it lol . I appreciate you watching and commenting brother

Nice job on the video, and I’m glad you made the update. I was planning to follow your original video, using just the top light. Now, I think I’ll go ahead and add the led strips just in case. If nothing else, it will be good have the extra lights when I’m unloading the kayak in the dark. Please keep cranking out the videos. I enjoy them.

@FishinNStuff

5 жыл бұрын

Thank you Sir , hey I appreciate you watching and I really appreciate you leaving a comment

You are a genius at DIY projects.

@FishinNStuff

5 жыл бұрын

No Sir I'm just a Crazy man that other ppl find interesting lol

@geraldfranz9085

4 жыл бұрын

@@FishinNStuff LOL !!! More like a mad genius my friend, and yes very interesting and entertaining. Always makes me think : what's he gonna come up with next" ? LOL !!! New subscriber so binge watching videos, will come back later and take notes. Keep on rockin in the "reel" world brother Keith, be blessed. Peace 😎👍✌🖖🐟💥🛎

Awesome Light. Going to put one on my kayak. Thanks for the helpful video.

My brother my brother 👍👍👍 man you always comingbup with something lol i look forward to your videos seriously!!! Very informative and innovative!!! I need to get me a bright long lasting light for my late spring early summer fishing hunts... Appreciate you brother great job!!!

@FishinNStuff

5 жыл бұрын

Crappie Sniper I appreciate you too brother , that was really funny cause you must have been watching my video and commenting at the same time I was watching yours lol, your comments always make me smile and makes the work worth it , thanks for the inspiration brother

Once again...mind blown!!! Thank you for sharing this!

@FishinNStuff

4 жыл бұрын

Thank you for watching brother

I built this, and it works extremely well. I fish in saltwater, and found that the led strip is not as waterproof as the manufacturer would have us believe. I had to re-solder an led connection that corroded under the clear material covering the strip, and resulted in half the strip going out. My solution was to order a marine grade clear shrink tube from Amazon. The shrink tube has a clear heat activated glue lining the inside that seals everything off from the elements, it's also pretty thick, so it protects the led's from bumps in the night. I've had it working now for about a year with no problems.

@FishinNStuff

4 жыл бұрын

I don't fish salt but the green light i made ,,,LED strip had held up fid in fresh water

I just made one last weekend. That was a brilliant idea! Now when my friends see it, and ask how the hell I came up with that idea, I just point them to your channel. Many thanks man!👍

@FishinNStuff

3 жыл бұрын

Tusk you too for the support buddy

Nice... i want a setup like that for when we go camping!

@FishinNStuff

5 жыл бұрын

Well it would work awesome lol , you should make you one for camping you could even leave the nav light off and just use it for a lantern

There you go again.... making something brilliant! Great work!

@FishinNStuff

5 жыл бұрын

Thank you Ma'am, now if I could just get as good at it as you are catching them bass I will have accomplished something . I appreciate you watching

@OldLadyAngler

5 жыл бұрын

@@FishinNStuff I wish I was as handy as you are!!

@FishinNStuff

5 жыл бұрын

Thank you I really appreciate that , on youtube you got to do what you found at lol

What a great DIY video. I'm going to make this light this weekend. Keep them coming

@FishinNStuff

4 жыл бұрын

Thank you Sir , I believe you'll really like it

You really made a great light. Your instructions are great. I am going to build one for myself. Thanks for the idea.

@FishinNStuff

4 жыл бұрын

Yes Sir thank you for watching brother

Great idea! Love it!

I'm watching this video now. Awesome stuff, thanks.

@FishinNStuff

4 жыл бұрын

Hey you'll like this light even better lol . Thank you brother I appreciate it

This video is absolutely fantastic thank you for sharing my friend

@FishinNStuff

5 жыл бұрын

Thank you for watching buddy and I appreciate it

Another great idea 👍😉🎣🎣🎣

@FishinNStuff

5 жыл бұрын

I appreciate you watching and commenting my friend . It means a lot and it's encouraging thank you

Awesome project something new for me to learn💯Thank you for sharing💯🔥👊🏽😊

@FishinNStuff

5 жыл бұрын

Thanks for watching , its appreciated

You come up with some really cool ideas, I especially like this one.

@FishinNStuff

4 жыл бұрын

Thank you Sir I appreciate that, and thank you for taking the time to comment , it inspires me buddy

Nav light is looking good, pretty bright!

@FishinNStuff

5 жыл бұрын

Thanks brother , it worked out . It would work well for bank fishing at night too

Pretty cool I'm going to have to save this to watch when I have more time

@FishinNStuff

5 жыл бұрын

Thank you Mike , I appreciate you commenting brother

This is awesome. We are planning a 3day 2 night river trip so this will be awesome. Thanks

@FishinNStuff

5 жыл бұрын

Thank you Sir I think you'll like it . Ive used this on my boat too for more light . I appreciate you commenting brother

Great build!!!! Thanks for sharing with us! W

I like it.. great diy again

@FishinNStuff

5 жыл бұрын

Thank you Sir I appreciate that brother

What an awesome light!, the armor all cap was genius, and who doesn't use armor all anyway so it ain't goin to waste. Great video, look forward to making one one day

@FishinNStuff

5 жыл бұрын

Thank you brother , you come wore yours out already lol , yeah I don't know why I didn't think of the Armor all thing sooner

Absolutely Brilliant!

You're awesome dude, looked at all of your DIY's, everything you touch is made better. You're the guy that other guys want to come over and hang out with and drink beer and make cool shit. Keep em' coming bro...

@FishinNStuff

4 жыл бұрын

Heck your awesome , cause that was an awesome comment man and I appreciate that, Have a safe and prosperous New Year brother

Another great DIY project and improve your night fishing. Great job brother

@FishinNStuff

5 жыл бұрын

Thank you Sir , I appreciate you brother . Thanks for watching and leaving a comment

Great intro lol, Man that switch is perfect. Awesome DIY share! Wow that's bright!

@FishinNStuff

5 жыл бұрын

Thank you buddy , you know you need one of these nav lights Robert that way you can see them Alligators trying to sneak up on ya haha

Over here in Australia we have to have the white nav light as you call it, here it's an anchor light & the nav lights are the red green port starboard lights. So if you can find a neat way to make those DIY then great, all powered boats by law need the red green nav lights that are greater than 54 lumens so that they can be seen for 2 miles. I'm making a 10 foot longtail catamaran that also has hydro foils with a 13 HP motor which should reach about 40mph while it's off the water.

@FishinNStuff

5 жыл бұрын

That' sounds like an awesome boat , over here in America or laws are the same as yours for power boats , but on kayaks they don't want you running green and red because boats can mistake you for another boat , and you don't have the speed to move out of the way . Is better they think your a anchored boat because a basically that's what you are moving 2 or 3 mph lol the brake light used on this Nav light is well beyond 50 lumens if I had to guess I would say closer to 250 lumens. But im sure you could make Nav lights for a boat using the same principle id you wanted . I appreciate you commenting buddy . I like learning too

I will have to try this!! Great idea bud!!

@FishinNStuff

5 жыл бұрын

It actually work great , I know you fish from a boat but ive used it in a boat before works great for a filming light at night

Keep the videos coming! I enjoy them! Your like a fishing Macgyver! I made the floating gopro holder, it worked really well!

@FishinNStuff

4 жыл бұрын

It does work well I agree , i appreciate you watching David

That came out awesome.

@FishinNStuff

5 жыл бұрын

Thank you brother it works great , hopefully it'll help somebody to save money and stop em from getting run over by a boat lol thank you for watching

You come up with some amazing ideas brother, very cool.

@FishinNStuff

4 жыл бұрын

Thank you Sir , you saying that means a lot to me . If you ever have an idea you would like to see done leave it in the comments brother

Thanks for sharing sir, you're doing an immaculate job 👍👍👍

@FishinNStuff

4 жыл бұрын

Thank you i appreciate that

That's a great idea! Thanks for sharing!

Sweet build! Thanks

That's super cool man! That looks super handy!

@FishinNStuff

5 жыл бұрын

It works great , I appreciate it thank you for watching brother

@StanleyOrchard

5 жыл бұрын

Totally agree!

Outstanding concept. Thanks for sharing.

@FishinNStuff

5 жыл бұрын

Thank you Pop I appreciate that Sir . Thank you for watching I appreciate that too buddy

Awesome DIY. Thumbs up

@FishinNStuff

5 жыл бұрын

Thank you Sir I appreciate it

Another great idea, thanks.

Soldering is never overkill,it’s piece of mind. Especially when dealing with DC voltage and moisture. On a side note.. when I solder I connect the wire horizontally, twist together,solder then shrink tube. Takes up less room.

@FishinNStuff

4 жыл бұрын

I agree with you 100 about the piece of mind man . But im not the best at soldering that's for sure lol

I gotta admit you pretty dog gone smart and creative. Well done and please keep the DIY's coming

@FishinNStuff

5 жыл бұрын

Well thank very much Sir , be careful you'll give me the big head haha , but seriously I appreciate that and I appreciate you watching and commenting too

Man you sound like home cooking to "dis" here displaced Arkansan! Thanks "fo da" videos brother... will be using lots of this info in my build.

@FishinNStuff

4 жыл бұрын

Yes Sir ,, thank you for commenting and I appreciate you watching brother. You are very welcome

That’s awesome. Wish I’d thought of that earlier! One thing I thought of is on the strip light, you could paint on layers of epoxy to make it 100% secure and more protected.

Thats freaking awesome man. Im gonna make me one. Thats handy!!

@FishinNStuff

5 жыл бұрын

It would make a great jon boat light as well , thanks brother appreciate you

I want to build something like this, my dad needs it for his canoe. Thank you! 👍

@FishinNStuff

5 жыл бұрын

It would be perfect man , cause it really does work great , thank you for watching my friend

Looks like my next project! That's awesome! Thanks!

Big ty, i made 1 used it same day,and yes it worked gr8. The box project is next

@FishinNStuff

5 жыл бұрын

You'll love it too , those lights are awesome and only a quarter of the price of the store bought ones , but 3 times better. I appreciate you commenting buddy . Makes me feel good , when I know I helped someone out , and they liked it

Damn son.....I’m making one of these for my kayak tomorrow! Great idea and a great video!!!!

@FishinNStuff

4 жыл бұрын

Thank you brother , you gonna love it . It's an awesome light

love the nav light. Like you I kayak fish and have a 17 Lowe Mod V ALUM bass boat, luv to Crappie and Catfish fish at night.

@FishinNStuff

3 жыл бұрын

Well we got a lot in common lol

You are a hoot! Great practical ideas!

@FishinNStuff

4 жыл бұрын

Thank you Sir

Nice light, thanks

Kool light

First off. Love all your videos. Thank you for taking the time to make and share them with us. From this video to today you have developed a really great video presence. It’s your personality I think. Love it. Tom

@FishinNStuff

11 ай бұрын

I appreciate that , I enjoy making people smile . I might stink at it but I try lol

Fine job indeed.

@FishinNStuff

5 жыл бұрын

Thank you Sir , I appreciate that . Ive got another Nav light video my first one is simpler , and I just posted a very cheap way to make a really cool kayak box you might like em . I appreciate you watching brother

Great job!

I love it. Great video!

@FishinNStuff

2 жыл бұрын

Thank you , that's a great light I cane up with that 5 years ago then modified it again for that video . Because good nav lights are hard to find and expensive when you find em

Awesome vid mate. Great DIY. I’m definitely making myself one of them. 👍🏻👍🏻🇦🇺

@FishinNStuff

5 жыл бұрын

Thank you Sir, I appreciate it and I appreciate you watching and leaving me a comment, the feed back help me out and if you need help with anything let me know and I'll be happy too help . Also I have 2 Nav lights I made and just post a kayak box video recently, let me know what you think about those of I hit the mark or missed , good day mate

Ok you answered my question from the last video it is break light. But no bugs yea I need 2 or 4. Lupas I have my eyes going bad so got to be able to see I bet that will. Sir I'm so glad I found your channel not long ago wished ide found you 10 years ago. I no KZread wasn't nothen back them. But with your diy and rod holders vidoes house made KZread bigger. But good job and thank you. God bless

@FishinNStuff

4 жыл бұрын

God bless brother actually KZread had been around for 13 years I think it started in 06 . But I wasn't on it hahaa , thank you brother

Thanks Kieth, I’ve been thinking about some kind of light for filming while night fishing, since summer will be here before you know it. Looks like would work like a charm for back lighting.

@FishinNStuff

5 жыл бұрын

It does mean , it's really bright . You can't leave it on long because of bugs but it works great when you need it

Freaking awesome! Great job!

@FishinNStuff

4 жыл бұрын

Thank you brother

Love this project. Love this channel. I recommend Corrosion-X on all exposed wires and contacts, especially in saltwater

@FishinNStuff

3 жыл бұрын

Thank you Sir and thanks for the tip

I needed to replace the Nav light on my Pontoon boat, I decided I didn't like it on the Bimini frame. So I ordered up an LED replacement that said it was BRIGHT. Oh it surely is! Best part is it is bright enough to use for a general light for fishin. Even with my old eyes, I can find stuff in my Tackle boxes. LED's are the bomb for fishin.

Awesome idea!

@FishinNStuff

4 жыл бұрын

Thank you brother , it works really good

great idea, I'm doing it! thanks for sharing

@FishinNStuff

4 жыл бұрын

Its a great light . I just post another light video as well

nice light. thanks for sharing.

@FishinNStuff

4 жыл бұрын

Thank you for watching brother

Dude, that some really good work

@FishinNStuff

5 жыл бұрын

Thank you man I really appreciate that . Thanks for watching brother and boosting my Ego lol

@RalphBarton-fishing

5 жыл бұрын

@@FishinNStuff is like to try this but I'd be afraid I'd burn my house down.. lol

@FishinNStuff

5 жыл бұрын

Haha it's only 12v lol id you hook it up backwards it just won't work

You could use the clear shrink tube you put on the light for fishing crappie at night. I just stumbled on this video after seeing most of your others. That shrink tubing would just add some extra protection from the weather as well. Hoping to use your ideas after I can get a kayak and get back to fishing. Love watching your diys!

@FishinNStuff

3 жыл бұрын

Thank you Sir

Great video and you know what? I "waller" down stuff almost everyday :)

Love the way you worked that cap out brother! PRO PROPS!!!

@FishinNStuff

3 жыл бұрын

Thank you Sir

@FishinNStuff

3 жыл бұрын

I built a green light a while back and worked out some more things and improved the light more

@FishinNStuff

3 жыл бұрын

kzread.info/dash/bejne/aKeYtNl7Z9GnerQ.html

that's awesome!!! need that on my kayak

@FishinNStuff

5 жыл бұрын

Yes you do haha every yakkin youtuber needs a good light to make videos , thank you brother I appreciate it

@ScottyhillakaFishn4Him

5 жыл бұрын

go ahead and put that one in the mail. lol

@FishinNStuff

5 жыл бұрын

Haha

wow good job

Nassa needs you your a bloody genius.

@FishinNStuff

5 жыл бұрын

They wouldn't hire me they would hear me talk with my country accent and say that boys stupid haha , I appreciate though I really do

@Vincentdonnelly5158

5 жыл бұрын

@@FishinNStuff Kevin Skinner won americas got talent. Great channel.

@FishinNStuff

5 жыл бұрын

It sure is I love that show

Like 15. Great job my friend! Thanks for sharing. 👌👌

@FishinNStuff

5 жыл бұрын

Hey thank you for watching buddy

@NATUREVIEWSNSOUNDS

5 жыл бұрын

@@FishinNStuff Your welcome!

That's great I need to make one for my kayak!!!!

@FishinNStuff

5 жыл бұрын

Yes you do haha , I think you'll like it . It'll sure help with making a video of it . I appreciate you brother

ArmourAll cap is awesome. Cheers from Canada!!

@FishinNStuff

5 жыл бұрын

It works great , I appreciate it my friend check back by or check the bell I've got a few more kayak DIYs coming up soon

@FishinNStuff

5 жыл бұрын

Ol and thanks for commenting that means a lot Sir

@Randy2747

5 жыл бұрын

So that's why the caps are missing off of the armor all bottles! Lol

@geraldfranz9085

4 жыл бұрын

@@Randy2747 BAHAHAHA 😎👍

wonderrful! Thanks

Love it! Great DIY and also Sub

@FishinNStuff

4 жыл бұрын

Thank you Sir , I appreciate you subscribing brother and I think you will love it even more after you make you one lol

Thanks for the great idea. I made one change. For fitting the led brake light, I used a heat gun to soften the 1/2 in. PVC pipe, the simply pushed the base of the light into the PVC and held it there until cooled and pipe once again hard. I'm sure I'm not the first. I actually prefer the single brake light vs. the strip light. My strip light became so hot after 20 minutes that the 3/4" pipe soften and bent. I was testing the battery. I'm sure it will work if I o ly use it a few minutes for video.

@FishinNStuff

4 жыл бұрын

That a great and simple solution , I should have thought of that , I've did it before , great idea . Ive never left the stripe light in long because of the bugs lol . Thanks for watching brother have you checked out the kayak box

@Bobadrift

3 жыл бұрын

Thank you for posting about the strip light heating the PVC. I making this light and will use CPVC instead of PVC since it has a higher maximum temperature of 180 F vs 140 F for PVC.

Awesome Video

Another Bright Idea using easy 2 get materials....LED's are amazing with the amount of light & the lack of juice required to produce the required results & You can use small Deep Cycle batteries to power them!!

@FishinNStuff

5 жыл бұрын

Exactly you said it best , and they don't get hot si you can use a Armour all cap lol I appreciate you brother

Good job 👍👌👌👍

@FishinNStuff

4 жыл бұрын

Thank you Sir

Really cool man

Pure Awesomeness!!!

@FishinNStuff

5 жыл бұрын

Thanks man

Very cool

I appreciate you brother. Built this today waiting for hurricane Dorian to move on past. Can't wait to night fish now!

@FishinNStuff

4 жыл бұрын

You'll like it man , I appreciate you watching and commenting it makes my daddy brother . You be safe and I hope the Lord keeps everyone safe during this storm

@FishinNStuff

4 жыл бұрын

Hey brother I was thinking you should make you a LED fishing light too . Ive got a video on how to make one and a diffrent video on how to use one they work really good kzread.info/dash/bejne/pYRhvMSPlsvAnbg.html

@kurtzFPV

4 жыл бұрын

I've watched that one, and a lot of your others. Also using a lot of ideas on your crate vid, along with one other guy's. You think the hanging light is better than LEDs on the bottom side of the yak? Was trying to decide. Thanks again.

@kurtzFPV

4 жыл бұрын

Also, appreciate the thoughts for safety. I and all my family are well. Now praying for some good friends in the Outer Banks.

Very cool fab love to see and make stuff work improvising is a gift SUBSCRIBED 👍👍

@FishinNStuff

5 жыл бұрын

Thank you Sir , my editing and videos have improved , I'm working hard at it and I appreciate your comment brother it encourages me more than you know buddy

Nice video! Very good explanation of how to make it. Just subscribed.

@FishinNStuff

5 жыл бұрын

Thank you I appreciate it brother. If there's anything you would like to see let me know

Definitely building one for my yak

thats amazing thanks for shamring

@FishinNStuff

4 жыл бұрын

Thank you Sir thanks for watching