Thanks you have help me!!

Good job appreciate the video

I had the exact same thing happen with my clutch puller! It broke just as your's did. What a PITA to get that primary off. As to the EPI tool, I have not used one yet, but my thoughts on ANY tool is this: The EPI carries a ONE YEAR WARRANTY, but what good is it if the thing breaks off in your machine? With that said, what are the thoughts of those watching this regarding the EPI tool? Will it work, or can it break too?

i had same problem. on my 05 you need to run the factory kawasaki belt witch is slightly skinnyier than the after market brands. the brake will be rubbing.

For a puller I stack in deep well sockets. I’m a old tech and never actually used a fancy puller just sockets a bolt and air

Ty man

Does your secondary clutch move at idle?

Was wondering where did you get your repair manual at because I have a 2016 brute force 750

@mogyver69

2 жыл бұрын

Just searched online, do a google search. Sometimes you can find a free download. Mine is for my model yr.

I’ve got a 2019 750 brute my clutch cover is broken. Any body know what years are interchangeable? They all appear to be the same but I can’t find any information. Tia for any help 🤙🏼

@placesucantgoadv2579

Жыл бұрын

His 05 looks just like my 23 if their like KLRs probably any in between

These machines need to have the belt deflection adjusted with shims in the secondary sheave as they wear (removed) , when you go to install a new belt add shims to set the belt deflection

On that 850 you got do you notice a whining/whistling noise at idle and riding. My 2021 850 Polaris sportsman whines/whistles and it sounds like it’s around the engine, I don’t think it’s the clutch

@mogyver69

2 жыл бұрын

Mine does not but I’ve herd of a issue between the engine and transmission where they attach having a bushing or bearing that can be a issue. Basically you have to pull the transmission and inspect a bolt than can come loose and the bushing or bearing of some type. I saw a video on it recently,

@dylanmckenzie6147

2 жыл бұрын

@@mogyver69 ok thanks

Working on a 650 vtwin kawasaki for a friend. What problem would I expect if my clutch cover is greasy? Thank you

@mogyver69

6 ай бұрын

crank seals behind the pullys. remove both primart and secondary and replace the seals.

How many miles or km or your project machine? Coz I found 1 got 13000km on it, I don't know if it's worth buying. 2007 13000km,650 brut force,breaks needs some work 4x4 light flashing.

@mogyver69

6 ай бұрын

I think when I bought it , it had around 3000 miles. I paid around $2000-$2500 I believe. Been a few yrs since I purchased it. It needed rear brakes, belt and master cylinder for front brakes. I did all the work myself so it wasnt to bad.

How did you get the secondary clutch off

@adrew1963

9 ай бұрын

it should slide off

How do you know if you need to replace the clutch

@jefferyboring4410

9 ай бұрын

It’ll slip ! You’ll know

did you buy the tool from EPI or did you get it on e bay

@mogyver69

Ай бұрын

first one was a ebay one that broke. I then bought a epi one. EPI works great!

@adrew1963

Ай бұрын

@@mogyver69 I bought a epi tool on e bay was just wondering if it was fake cost 35 bucks not sure if thats norm or not but hell Ill give it a try and pray to god it does not break thanks

Traducir español