Dad joke: What's the best saw to get into a romantic relationship with? A reciprocating saw.

@diyforknuckleheads

2 жыл бұрын

😂😂....I'm using that one Roland 👍😁

@saby8765

Жыл бұрын

You did not 😂😂😂

Dad Joke: Attention, this is not a drill. I repeat, this is not a drill.

@diyforknuckleheads

11 ай бұрын

😂😂

Thank you. I’ve had a jigsaw for about 8 months and haven’t even opened it. Now I’m ready to start on my 1000 diy projects😂

@diyforknuckleheads

Жыл бұрын

Hahahahha...good stuff Cindy! Glad you found the video useful and good luck with those projects! 👍😁🇦🇺

1) Knowledge, safety 2) Knowledge, safety 3) Knowledge, safety the three musts, for any tool worker. (a retired Orthopaedic Surgeon). Wishes for Merry Christmas and a Happy New Year, to all, from mount Olympus, Greece.

@diyforknuckleheads

3 жыл бұрын

Thanks Konstantinos......great to hear from some one on the coal face 👍👍 Merry Christmas mate and thanks for watching all the way from Mt Olympus!! 👍🇦🇺😁🎄🎄🎄

If I ever start a youtube channel, I want to deliver my lines as koncise and punchy as you do. To the point, no hesitation and utterly enjoyable!

@diyforknuckleheads

3 жыл бұрын

Thanks mate! I'm sure if you started a Channel you would kill it 👍 Thanks for watching and Merry Christmas 😁🎄🎄🎄👍

Thanks for this! As an Australian I struggle to find DIY vids on KZread that aren’t American and using different terminology and of course the dreaded imperial system... appreciate your channel!

@diyforknuckleheads

3 жыл бұрын

Thanks Jane! Glad you liked the vid 👍😁🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺

@rayrobinson3015

3 жыл бұрын

Bloody Well Right Jane!!!! That 'American terminology' is SO dreadful. Have a spot of tea dear and a crumpet straight away at the outback. Hip Hip, cheerio, God save the Queen. Hope you enjoyed a little British humor. You probably need to take a nap now straight away after all that excitement watching a man with his jig saw. Remember to always keep your jigsaw handy Jane and tune in for the next thrilling episode, "How to insert a square peg in round hole!" A must see for all Australians 18 or older..........

If you mark the center of your circle, you can put a screw into it. Tie a piece of twine to it and the other end to your jigsaw. Obviously, you have to adjust the length to get your blade along the edge of your circle but it is pretty helpful in keeping you from straying too far off course. I do this all the time for subwoofer cutouts on enclosures.

@diyforknuckleheads

Жыл бұрын

👍👍....Good tip Murray 👍

@larryllamma7593

7 ай бұрын

Great Tip Knackers!! Ooops.. I mean.. Great tip @murrayshekelberg9754! Hmmm... doesn't quite have the same ring to it... But thanks anyway!

I love this guy as a teacher! Ty for all your guidance.

@diyforknuckleheads

2 жыл бұрын

👍😁....No worries at all Emily....thanks for the feedback and for watching the vids....much appreciated 👍😁🇦🇺

I am so grateful because KZread recommended me this video. I'm about to start a woodworking project & you're being helpful through all of the information. Thank you sir!

@diyforknuckleheads

2 жыл бұрын

My pleasure mate! Glad you found the vid useful 👍😁🇦🇺

@missoula2213

2 жыл бұрын

Same. I'm a knucklehead who appreciates this as well.

@diyforknuckleheads

2 жыл бұрын

@@missoula2213 👍👍

Thanks for this. Not afraid of jigsaws now. There is certainly a lot more to it than other saws

@diyforknuckleheads

3 жыл бұрын

Cheers Alexander....glad you found it useful mate. Like anything, you just need to become familiar with the machine. Merry Christmas 👍😁🇦🇺🎄🎄🎄

I finally decided I want to start some very basic woodworking and I only have access to a jigsaw. This video explained so much that I had no idea about. I really like your style of teaching, and as an American love the accent. Thanks!

I just used it to cut a few pieces of plywood boards kzread.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS works great. The blade that came with it isn't very good and I bought a much better bosch one which made much cleaner cuts. Blades were cheap, a few bucks.

Very detailed explanations from a beginners perspective, thank you!

@diyforknuckleheads

Жыл бұрын

No worries at all Jos! Glad you found the video useful mate 👍😁🇦🇺

CONGRATULATIONS on 200k!!!! Much deserved.

You are awesome. Thank you for your videos, thanks for the reminders about safety.

@diyforknuckleheads

3 жыл бұрын

Very welcome Marianne 👍😁 Thanks for watching and for the feedback....really appreciate it 👍😁🇦🇺

I'm now tuning in almost exclusively for the jokes! :) As a new woodworker this year, these videos that go over the basics are awesome, but the jokes....they put these videos over the top for me!!!

@diyforknuckleheads

3 жыл бұрын

😂....Thanks Donny....glad you like 'em mate 👍 Really appreciate the feedback mate 👍🇦🇺😁

If I had to choose only 2 power tools for the rest of my life it would be a drill or maybe impact driver and a circular saw. One to cut wood and one to screw em together ! I was making push sticks and had a hell of a time with my jigsaw trying to make curved cuts and the blade wasnt cutting straight down but now I see I shouldve used my thin scroll blades. Was having a lot of binding issues and non square cuts. I got a dad joke. Whats the difference between a hippo and a zippo? One weighs a lot and the other one is... A little lighter.. (I'll see myself out)

@diyforknuckleheads

3 жыл бұрын

😂....love the gag....l'll have to steal that one off ya 😁👍 Yeah the thinner scroll type blade is the go mate.....makes life a lot easier👍👍 Thanks for watching and Merry Christmas 👍😁🇦🇺🎄🎄🎄

@IsaKocoglu

3 жыл бұрын

Great joke knackeeEEEeers!!!

@kccodex8931

3 жыл бұрын

I'll see myself out...is classic! A Penguin with car troubles stops by the shop, the mechanic says, looks like you blew a Seal. The Penguin looks indignant wipes his mouth and says nooooo that's just Tartar sauce.

@diyforknuckleheads

3 жыл бұрын

@@kccodex8931 😂😂👍

@mrtomsaa

2 жыл бұрын

I would take angle grinder instead of circular saw.

Informative as ever Uncle K, Funny thing, when you know you’re not getting the best out of your machine, you can read the instructions all day and get very little out of it, - but when someone who knows shows you, it’s a whole different game- makes it all so much more enjoyable. Great job mate, well done you 👍 You and yours have a great Christmas and a safe new year

@diyforknuckleheads

3 жыл бұрын

Thanks John! Yeah it always looks a little easier when someone shows ya. Appreciate the comment mate and Merry Christmas 👍😁🇦🇺🎄🎄

mate I genuinely believe you should have your own carpentry show. I'm socked you dont have a million subscribers yet! I'm loving this channel mate! Learning heaps.

@diyforknuckleheads

3 жыл бұрын

G'day Daniel...really appreciate the comment mate 👍👍🇦🇺😁

Hello my friend, Safety first in woodworking. Thank you for this great information. Useful and good information about the use of decoupage. Thanks for sharing. Stay healthy and safe. Big greetings. Best regards, Mehmet...

@diyforknuckleheads

3 жыл бұрын

G'day Mehmet 👍 Glad you liked it mate and thanks for watching 👍😁🇦🇺

3 жыл бұрын

@@diyforknuckleheads 😜👌

Thank you so much for explaining the dreaded jigsaw! Excellent explanation!

@diyforknuckleheads

3 жыл бұрын

Thanks Chris 👍...Glad l could throw some light on it for you 😁🇦🇺😁👍

Love, love, love your presentation. you are funny sometimes and more importantly your demo and descriptions are so clear. Thank you. I’ve learned so much from your videos.

@diyforknuckleheads

3 жыл бұрын

You are so welcome Coquijim! Glad you find the videos useful mate 😁🇦🇺👍

Just got my cute little compact jigsaw for wood projects! Thank you so much for helpful tips! Somewhat intimidated by it all. 😊

@diyforknuckleheads

2 жыл бұрын

👍....You'll be fine Ardith....just take you're time 👍😁 Thanks for watching 👍😁🇦🇺

like it already before watching

@diyforknuckleheads

2 жыл бұрын

👍😁....Thanks John 👍👍😁🇦🇺

Very nice tutorial, knackers! Pro tip from the construction yard: If you don't have an inverted blade but you need your cut to be 100% clean, hold your machine upside down in a vice, switch and lock it on, and use the base plate as a sawing table. This way, your blade will pull into your visible surface. This is not safe, not good for the machine. But it'll get the job done.

@diyforknuckleheads

2 жыл бұрын

Thanks Andre.....nothing like improvising mate 👍😁🇦🇺

Maaate!!! Good on ya! I knew all these tips, but reminders never go astray! Great tip knackeeEeeEEEers!

@diyforknuckleheads

3 жыл бұрын

Thanks Isa 👍👍 Appreciate you watching mate and Merry Christmas 👍😁🇦🇺🎄🎄🎄

I've had that straight edge guide since I can remember and I always wondered what it was for, and now I know! Subscribed and clicked the 🔔! Thanks!

@diyforknuckleheads

2 жыл бұрын

👍😁....Thanks for the Sub Jarred! Glad you found the vid useful mate 👍😁🇦🇺

I saw this tip on another channel. If you don't have the immediate want or capabilities to cut the pilot hole prior to cutting the circle as shown in the video it's completely possible to plunge cut with a jigsaw. Simply start the saw with the shoe up on the front edge and the blade above the wood and then slowly plunge the blade into the surface keeping a firm grip, while keeping the front of the shoe steady against the wood. I tried it and it works great.

@diyforknuckleheads

2 жыл бұрын

👍👍

The jigsaw has never been my favorite tool, but after today’s video, I think I may have blow the dust off it, and ‘give it another go!’

@diyforknuckleheads

3 жыл бұрын

Give it a go Shawn....just need a little patience mate👍 Thanks for watching and may you and the fam have a safe and Merry Christmas 👍😁🇦🇺🎄🎄

@danwhitaker9168

3 жыл бұрын

My jigsaw's blade holder broke for the second time two days ago. I had replaced the part a few years ago and I hardly ever use it. Tuesday was trash day so in the trash, it went.

@cuwest1

3 жыл бұрын

@@danwhitaker9168 Did you throw your jigsaw in the trash or just the holder? I know I’ve had days when I wanted to chuck the whole thing in the trash too... but haven’t yet.

@danwhitaker9168

3 жыл бұрын

​@@cuwest1 The entire jigsaw. it was close to 25 years old.

@cuwest1

3 жыл бұрын

@@danwhitaker9168 ya, probably time for a new one then.

Just got myself a nifty lil' Makita jigsaw. Approaching 40 and am discovering a dormant passion for tools, woodworking.. your channel is one of my favourite stops for all things tool related and I just love Australians.. if you guys didn't exist, someone would have to invent you 😁. Thanks a bunch for all the videos.. a warm hello from Croatia (and former South African dweller)

@diyforknuckleheads

2 жыл бұрын

Well done on choosing the Makita mate....it'll be a great little tool for you 👍 😶‍🌫️Thanks for taking the time to watch Igor.....really appreciate it mate, especially when you are watching all the way from Croatia 👍😁🇦🇺

@makemarker

2 жыл бұрын

@@diyforknuckleheads thanks to you again. All the best mate

Love it! thanks for the tips and taking time to make these videos--always enjoy them.

@diyforknuckleheads

3 жыл бұрын

👍....Thanks Lisa....l always appreciate your feedback. Cheers 👍😁🇦🇺

Thank You...great presentation and demonstration

@diyforknuckleheads

6 ай бұрын

👍😁....No worries at all....glad you found it useful and thanks for taking the time to watch 👍😁🇦🇺

You and your family have a happy holiday season. Thanks for all the tips and projects throughout the year

@diyforknuckleheads

3 жыл бұрын

My pleasure Gary! Thanks for taking the time to watch and comment.....it's much appreciated 👍 Merry Christmas to you and the family as well 👍😁🇦🇺🎄🎄

I have never used circular saws, jigsaws, or even wood work in my life, but these type of videos are the best tutorials with the precise tips and information I needed. Thank you for your help and all of your videos!

@diyforknuckleheads

2 ай бұрын

No worries at all mate 👍😁 Glad you found the video useful and thanks for taking the time to watch 👍😁🇦🇺

Some very handy tips there. Thanks for those and thanks for all your videos. Have a great festive season.

@diyforknuckleheads

3 жыл бұрын

Glad you liked it Tahir and thanks for all your support throughout the year.....it really is appreciated 👍 Merry Christmas mate 👍😁🇦🇺🎄🎄🎄

Top class video what a great teacher you are fella 👏👏

@diyforknuckleheads

8 ай бұрын

Cheers mate! Appreciate the feedback 👍😁🇦🇺

Great video for newbies. My one and only suggestion is never pull out the saw from the wood and place it by your side (as you did), until the blade comes to a complete stop.

@diyforknuckleheads

Жыл бұрын

👍👍

You're excellent at explaining things. Good job 💪

@diyforknuckleheads

2 жыл бұрын

Thanks R! Appreciate the feedback mate 👍😁🇦🇺

I LOVE your videos! Thanks for the help!

@diyforknuckleheads

3 жыл бұрын

Happy to help Toby! Thanks for watching mate 👍😁🇦🇺

Thanks for the video

I am going to a jigsaw lesson tomorrow with Carlos but the one I used was very different. It has no trigger, it has an on/off button and unlock/lock button.

Thank you for this clear explanation

@diyforknuckleheads

Жыл бұрын

👍👍

Thank you so much from northern Vancouver Island! This is wonderfully helpful.

@diyforknuckleheads

2 ай бұрын

My pleasure Karen 👍 Glad you found the vid useful and thanks for the feedback 👍😁🇦🇺

Thank you for the info. Very helpful.

@diyforknuckleheads

Жыл бұрын

No worries at all....thanks for watching 😁🇦🇺

Many thanks for a very useful, lucid, and entertaining primer on jigsaws! I’m a newcomer here, but am looking forward to exploring your archives.

@diyforknuckleheads

Жыл бұрын

Welcome aboard Alan! Glad you liked the vid mate 👍😁🇦🇺

Oh!!! Bloody marvellous 🤩 I just bought my first jigsaw at the age of 47! I was terrified to use it but tallyho… here I gooooo!!! Thanks so much!

@diyforknuckleheads

2 жыл бұрын

👍😁....Well done Tara! Good luck with it 👍😁🇦🇺

@DramaticallyMiddleAged

2 жыл бұрын

@@diyforknuckleheads it went well… I’m looking for things to slice up now! 😁💃🏻💃🏻💃🏻

@diyforknuckleheads

2 жыл бұрын

@@DramaticallyMiddleAged Look out everybody! 😂

Hi. Brilliant vids. Glad a found your channel. Excellent stuff. Best I've seen. 🇬🇧👍👌😊

@diyforknuckleheads

3 жыл бұрын

Awesome! Welcome aboard Peter and thanks for watching.....glad you like the videos and Happy New Year 👍👍👍😁🇦🇺

Thank you for explaining! I have had one for years and finally replaced my forever old one that finally gave up. Explaining the blades was super helpful. It seems mine tend to “wonder” off course. I think I’m too impatient. Merry Christmas to you and your family!

@diyforknuckleheads

3 жыл бұрын

Thanks Sheri 👍 When your blade wanders off course, make sure the machine is at full speed but slow down your feed which is how fast you push the machine. Let it do all the work for you. Your job is just to guide it which does take a little practice 😁👍 Thanks for watching and may you and the family have a safe and Merry Christmas 👍😁🇦🇺🎄🎄🎄

AWESOME VIDEO - I have saved this video to my favourites as it is the best of the best!! THANK YOU!

@diyforknuckleheads

Жыл бұрын

Fantastic! Glad you liked it Kenn and thank you for the awesome feedback! Cheers 👍😁🇦🇺

Very nice information, explanation and demonstration. Thanks for taking the time. Stay safe you and yours.

@diyforknuckleheads

11 ай бұрын

Cheers mate! Appreciate the comment 👍😁🇦🇺

Well explained, Shane. All the best to you and your family this coming year.

@diyforknuckleheads

3 жыл бұрын

Same to you and yours Steve and thanks for all your commentary throughout the year. I can always count on some feedback from you....it's much appreciated mate 👍😁🇦🇺🎄🎄

Excellent video, especially the explanation of the jigsaw blade cutting on the up-stroke, and the fact that a reverse-blade (for down-stroke cutting) could cause the jigsaw to bounce. Very useful info, thanks.

@diyforknuckleheads

2 жыл бұрын

Glad it was helpful and thanks for watching 👍😁🇦🇺

Wow. Thanks a lot. Great video. Very well explained.

@diyforknuckleheads

Жыл бұрын

Thanks Anna! Glad you found it useful 😁🇦🇺👍

Hello, new subscriber here. Just want to say thank you for this informational tutorial. I am a newbie to using power tools, and doing "DIY" woodworking projects. Started out using cardboard for my personal projects but, have developed a curiosity for woodworking. Been wondering how a jigsaw works and now I know because, of this video. I made my first (cable spool) foot ottoman a few weeks ago. My daughter was so impressed she has requested a coffee table ottoman and, 2 smaller sitting ottomans for her home. My children have always been my greatest incouragers when it comes to learning new things. With the right supplies I have confidence I will fulfill her wishes. However, I need to get a jigsaw...so your tips about blades helped to encourage me to move forward with my decisions. 😏😊💝

@diyforknuckleheads

Жыл бұрын

Awesome! Glad you found the vid useful Mandy and good luck with that new jigsaw 👍😁 Looks like you will have your full with all those new projects...Merry Christmas 👍😁🇦🇺🎄🎄

@mandycarter7094

Жыл бұрын

@@diyforknuckleheads Merry Christmas to you, and your family Sir. 🎅🤶😊

Very usefu tips as always. Daddy's jokes gaining momentum, too. Thank you, happy Christmas!

@diyforknuckleheads

3 жыл бұрын

Thanks Pavol.....good to see the Joke rating improve slightly 😂 Merry Christmas to you and the family mate 👍😁🇦🇺🎄🎄🎄

@johnaleman3564

3 жыл бұрын

@@diyforknuckleheads you hff

@MegaLancet

3 жыл бұрын

@@diyforknuckleheads could you use the jigsaw for the nails on pallets you reckon ? Cheap affordable rather than the big guns with a metal cutting blade

Thanks for a very entertaining yr thanks for sharing your knowledge with an Aussie sense of humour

@diyforknuckleheads

3 жыл бұрын

Cheers mate! Appreciate the comment 👍😁 Merry Christmas 👍😁🇦🇺🎄🎄🎄

Enjoying your videos and humour very much indeed.

@diyforknuckleheads

3 жыл бұрын

👍...Glad you like them Martin and thanks for watching...much appreciated 👍😁🇦🇺

Thank you Shane for the tips and jokes this year. Have a great. Christmas and keep safe. Cheers

@diyforknuckleheads

3 жыл бұрын

Thanks George ......appreciate all your support this year mate 👍 Merry Christmas to you and yours as well 👍🇦🇺😁🎄🎄🎄

Merry Christmas to you and your family too! Thanks for all your hard work and tips for us 👍

@diyforknuckleheads

3 жыл бұрын

Thanks Lisa👍👍 I hope you and your family have a safe and Merry Christmas as well 👍😁🇦🇺🎄🎄🎄

Thank you! Never used a jigsaw (or any power tools) before today. I've no doubt I'd have made a mess of it without this. Still got all my fingers. 👍

@diyforknuckleheads

2 жыл бұрын

Got all your fingers??....that's a Bonus 😂....Well done Millee! Glad you found the video useful and thanks for watching 👍😁🇦🇺

Useful video..., plain & simple 👍👍👍

@diyforknuckleheads

3 жыл бұрын

👍😁....Cheers for that 👍😁🇦🇺

ANOTHER ENTERTAINING AND EDUCATIONAL VIDEO. WELL DONE KNACKERRRRSSSSSS.

@diyforknuckleheads

3 жыл бұрын

Thanks Ian! Appreciate that mate and may you and your family have a safe and Merry Christmas 👍😁🇦🇺🎄🎄🎄

@iangardener3464

3 жыл бұрын

@@diyforknuckleheads You and your family too. Be safe.

On my jigsaw you have to press in the side button to be able to press the trigger and it has no locking option. This is presumably intended as an additional safety feature in that if the operator loses their grip on the tool for any reason it will power down. Unlike my deadly angle grinder where although it is really hard to turn on by accident once on the switch locks into place. That thing is scarier than the circular saw.

Excelente explicación, gracias por compartir su Conocimiento!

@diyforknuckleheads

3 жыл бұрын

¡Gracias Luis! Me alegro de que el video te haya resultado útil y Feliz Navidad para ti y tu familia 👍😁🇦🇺🎄🎄🎄

This video was awesome. Thank you!

@diyforknuckleheads

2 ай бұрын

👍😁....Cheers mate 👍😁🇦🇺

This was so helpful, thank you!

@diyforknuckleheads

Жыл бұрын

Glad it was helpful! 👍😁🇦🇺

I really enjoy your videos. They are informative and entertaining at the same time. I get slick out of the bad dad jokes. Thanks for putting out your videos. Merry Christmas to you and a very Happy New Year.

@diyforknuckleheads

3 жыл бұрын

Thanks Jim👍 Appreciate the comment mate and Merry Christmas to you and the family 👍😁🇦🇺🎄🎄🎄

Perfect timing - mine was delivered today !

@diyforknuckleheads

3 жыл бұрын

Awesome! Have fun with it mate....it's a great little tool 👍 Merry Christmas 👍😁🇦🇺🎄🎄

Brilliant. Thank you.

@diyforknuckleheads

3 жыл бұрын

No worries Gary! Thanks fo9r watching mate 👍😁🇦🇺

A great educational video, dude! These really do help out the beginner! Keep up the fantastic work and all the best to you and your family for 2021! 🍻🤘💜

@diyforknuckleheads

3 жыл бұрын

Awesome! Thanks for that Andy....really appreciate it mate 😁👍 Merry Chrissy to you and yours as well 👍🇦🇺😁🎄🎄🎄

Awesome knowledgeable videos. I'm not a pro on cutting but I'm learning when needed.

@diyforknuckleheads

Жыл бұрын

Good stuff A.J.! Glad you found the video useful 👍😁🇦🇺

Great video mate !!! So helpful, keen to learn more from you !!!

@diyforknuckleheads

3 жыл бұрын

Thanks Danny....hope you can stick around for more to come 👍😁🇦🇺

Thanks for all the vids mate. Wish you a happy new year!

@diyforknuckleheads

3 жыл бұрын

Thanks F.F and the same to you and your family as well mate 👍🇦🇺😁

Great tips as ever. I bought a jigsaw about five years ago. I can’t believe how I did without one. My circular saw gets the occasional outing but the jigsaw gets used on most woodworking jobs. When I get roped into jobs for the family at their house, a jigsaw and the wheelie bin is a good combination...

@diyforknuckleheads

3 жыл бұрын

Good stuff Mike....love the jigsaw, wheelie bin combo 👍😁 Thanks for watching mate and Merry Christmas 👍😁🇦🇺🎄🎄🎄

Cheers mate, love your vids.

@diyforknuckleheads

3 жыл бұрын

Thanks Norm.....appreciate it mate 👍😁🇦🇺

Love watching your videos very entertaining but very informative too all the best from the uk

@diyforknuckleheads

3 жыл бұрын

Thanks Trev! Really appreciate the comment mate and may you and the family have a safe and Merry Christmas 👍🇦🇺😁🎄🎄🎄

@trevorcook7259

3 жыл бұрын

@@diyforknuckleheads cheers pal same to you and yours, let's hope 2021 is better

Great video. Concise and to the point, great for beginners or even old timers like me.

@diyforknuckleheads

5 күн бұрын

Thanks Mel! Appreciate the feedback mate 👍😁🇦🇺

Thank you Guru, excellent demonstration!

@diyforknuckleheads

2 жыл бұрын

You are very welcome Arif! I appreciate the feedback 👍😁🇦🇺

Well Uncle I've been in the trade for over 40years and my grandson and I love your vids, thanks for posting and keep em coming!! Happy Christmas to you and yours stay safe, see you next year,

@diyforknuckleheads

3 жыл бұрын

G'day Paul...thanks for watching mate and say hi to your Grandson for me 😁 Merry Christmas mate and all the best for 2021 👍😁🇦🇺🎄🎄🎄

Excellent tutorial. Respect from Italy 🇮🇹 Subscribed!

@diyforknuckleheads

2 жыл бұрын

Awesome, thank you Esa! Appreciate the Sub mate 👍😁🇦🇺

This is an excellent video - I once tried using my late Dad's Jigsaw that he have must have bought in the 1970's. Needless to say I hated it and made a bit of a mess and the saw was a bit noisy and jumpy. Your video has helped me enormously and I am going to buy something more up to date using the pointers you have indicated. Thank you very much!

@diyforknuckleheads

2 жыл бұрын

Fantastic Malcolm! You'll love the new machine mate....thanks for watching 👍😁🇦🇺

Thank you for making this video! I am pretty much a beginner to power tools and I wanted to do some research before just going out and buying my first jig saw. So far it's looking to be about the same skill level as a sewing machine. Definitely not scary anymore.

@diyforknuckleheads

7 ай бұрын

No worries at all.....glad you found the video useful and good luck with the jigsaw 👍😁🇦🇺

I'd also say with all saws, buy good blades. You can use a cheaper saw, but, a cheap blade will bring out the cussing because they get dull so fast, which puts more strain on the tool and makes the cut rougher. Also faster saws tend to work a bit better.

@diyforknuckleheads

Жыл бұрын

👍👍...Good advice Michael 👍😁🇦🇺

Very well done video.Thank you very much!

@diyforknuckleheads

Жыл бұрын

Thanks Josh! Appreciate you taking the time to watch mate 👍😁🇦🇺

Very informative and entertaining videos. Very good work you deserve more subscribers

@diyforknuckleheads

3 жыл бұрын

Thanks for that comment George....really appreciate it mate! 👍😁🇦🇺🇦🇺

This was fantastic!

@diyforknuckleheads

5 ай бұрын

👍😁....Cheers mate! Glad yo found the video useful and thanks for taking the time to watch 👍😁🇦🇺🎄

Good job uncle knackers 👍🏻🎄

@diyforknuckleheads

3 жыл бұрын

Thanks Barry 👍 Merry Christmas mate 👍😁🎄🎄

Champ! Great vid Shane!

@diyforknuckleheads

3 жыл бұрын

Thanks B.M....Merry Christmas 👍😁🇦🇺🎄🎄🎄

Your a bloody legend mate thank you! Love from London 🇬🇧 ❤️

@diyforknuckleheads

2 жыл бұрын

👍👍...No worries at all mate! Glad l could help 👍😁🇦🇺

I'm so glad I watched your video. I now understand my jigsaw. 😊

@diyforknuckleheads

2 ай бұрын

Fantastic! Glad you found the video useful. 👍😁🇦🇺

That was really helpful Shane. I'm appalled to say all these years I never knew what those 3 stops were for!! Great stuff as always. Happy 2021 mate.

@diyforknuckleheads

3 жыл бұрын

👍....Yeah l reckon a lot of people don't know mate 🤔😂 Thanks for watching Bruce and all the best to you and yours as well mate 👍😁🇦🇺

Thanks for the informative video. I'm buying a jigsaw today and it will be my first power tool. I am making shelter boxes for my towns feral cats. We have been spaying and neutering them as well. I will make sure I get one that takes T shaped blades. I will also get safety glasses. Thanks so much!!

@diyforknuckleheads

Жыл бұрын

Awesome! Good luck with it Crystal and thanks for watching 👍😁🇦🇺

Just got this video recommended by KZread, and I'm so glad I watched it! As a super newbie in woodworking I loved the video, the explanations, the information and the jokes. I actually have an old borrowed jigsaw as my only power tool and Im having trouble making it cut through a 2 inch thick wood, gonna see if there's something from this video I can apply to get the job finally done! Happily subscribed and looking forward to checking out your other videos :))

@diyforknuckleheads

2 жыл бұрын

Awesome! Welcome aboard Manceroy 👍😁 Hope you can stick around for many more videos to come mate 👍😁🇦🇺

Thank you!

@diyforknuckleheads

3 жыл бұрын

You're welcome Chloe 👍😁🇦🇺

Brand new to a jigsaw and you cut a blinding video, made a Pom smile on a Sunday morning. Gods on ya pal

@diyforknuckleheads

Жыл бұрын

👍😁...Thanks Admaztaz!

Thank you verymuch for your simple and very pleasant teaching. Please join a school, teach to hearts.

So useful!!! Thanks mate!

@diyforknuckleheads

3 жыл бұрын

No worries at all mate 👍👍 Glad to help and thanks for the feedback 👍😁🇦🇺🇦🇺

Cracking video again Unkle Knacker!

@diyforknuckleheads

3 жыл бұрын

👍...Cheers mate 👍😁🇦🇺

Really appreciate the simple and straightforward introduction; I like those jokes as well~ cheers!

@diyforknuckleheads

3 жыл бұрын

Cheers Gerald!...Glad you found the video useful mate and thanks for watching 👍😁🇦🇺

I'll take a dozen of those coping saws thanks! Merry Christmas to you and yours Shane. Been lovely watching all your 2020 videos and I'm looking forward to sharing 2021 with you too!

@diyforknuckleheads

3 жыл бұрын

A dozen are on their way Kerri 😂 Thanks for watching this year.....your support is really appreciated and may you and the family have a safe and Merry Christmas 👍😁🇦🇺🎄🎄🎄