This man understands the depths of my stupidity. Subscribed

@diyforknuckleheads

11 ай бұрын

😂.....Cheers mate! Glad you found the vid useful 👍😁🇦🇺

@atedinahalf6288

2 ай бұрын

Table saws are not meant for sitting. Very uncomfortable.

Perfect for small projects. Not got a lot of power so if the wood starts to flex it stops the saw pretty easy. Use it for small tasks and you will be happy. Safety system Works great kzread.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c .lose your grip on the saw it shuts off and the sheath closes over exposed saw.

LOVE this week's dad joke. I'm going to use it often. Thanks for all the tips. I'm glad your back to posting videos. I really enjoy them.

@diyforknuckleheads

2 жыл бұрын

Appreciate that Jeffrey! Hope you're having a great weekend mate 👍😁🇦🇺

Great tips as always Shane, all good reminders. Loving the "Safety in numbers' 🤣.

@diyforknuckleheads

2 жыл бұрын

😂....Thanks Ian! Appreciate you taking the time to watch mate 👍😁🇦🇺

@mranonymous8979

2 жыл бұрын

Here’s a beginner question i haven’t heard anyone ask. Why does a circular saw blade need to spin so fast to cut wood?

@giorgio84

2 жыл бұрын

@@mranonymous8979 i think faster means more powerful

@giorgio84

2 жыл бұрын

Tbh did not get the joke xD

Great safety tips. One other one I didn’t see was to adjust the height of the blade to only cut the thickness of the material thus saving the blade wear.

@diyforknuckleheads

2 жыл бұрын

Yeah that's a good one Bill 👍 Thanks for watching mate 👍😁🇦🇺

Hi Shane, thanks for sharing your recent experience. Takes a big guy to admit mistakes and it shows we can all make them.

@diyforknuckleheads

2 жыл бұрын

Cheers Jerry! Yeah it was a close call mate....got a bit complacent. We all need a little wake up call every now and then 👍😁🇦🇺

Hey Shane, one of the best things I ever did when it came to a circular saw was buy a 165mm 18v Makita. The smaller size does about 80% of what my 235mm Hitachi saw would do, so I only need that on special occasions. But the best thing about the 18v cordless, is the brake on it. Release the trigger and the saw stops in only a few seconds, and it has the added benefit of no cord, which means no tripping hazard and no fluffing around with the cord accidentally getting caught. Just my 2 cents

@diyforknuckleheads

2 жыл бұрын

Yeah all good reasons Nathan 👍👍 Thanks for taking the time to leave the feedback mate. Cheers 👍😁🇦🇺

@firebladex8586

2 жыл бұрын

I just bought the DeWalt Atomic series 4 1/2" 20V saw. Because of where I am and the light cutting I do it's much more practical than my standard 7 1/4" circ.

@SoldattoHD

2 жыл бұрын

I believe the brake also stops it from kicking back as it stops when the pressure gets too high

I have to thank you Soooo MUCH! I have been accumulating saws and tools for the past 2 years to start small woodworking projects as a hobby. I know NOTHING so I have been too afraid to turn on my saws let alone use them. lol :-( This video has really helped aleve my many fears. THANKS!!!

@diyforknuckleheads

2 жыл бұрын

You're very welcome Sheelah! Glad you found it useful and thanks for taking the time to watch 👍😁🇦🇺

Wise advice and funny as always. This is a great reference for circs. One of the clearest remaining memories from my childhood is my dad coming close to taking his arm off with a circular saw. Early 90s, im out the backyard with him and hes cutting on saw horses, it kicks back and he gets a scratch from one end of his forearm to the other. He said some words, put the saw down, sat down and chain smoked while staring at the ground/sky/ his arm!! *Cue The Wonder Years opening credits*

@diyforknuckleheads

2 жыл бұрын

Mate!....no wonder the old man had to sit down 😬 Yeah that's one of those things that happens to anyone who uses a circ at some point....scary as A.F! Thanks for watching Ryan and hope all's well down there mate 👍😁🇦🇺

Good one , Easy to flow - some people do NOT UNDERSTAND the basic principals involved .

@diyforknuckleheads

2 жыл бұрын

Cheers as always Bob 👍 Thanks for watching mate 👍😁🇦🇺

I'm a sucker for dad jokes, keep them coming!

@diyforknuckleheads

Жыл бұрын

Hahahahahah.....cheers mate 👍😁

Great tips, thank you very much!

@diyforknuckleheads

Жыл бұрын

No worries mate! Glad you found the vid useful 👍😁🇦🇺

Your presentation is excellent. Thanks.

@diyforknuckleheads

2 ай бұрын

👍😁....No worries mate....glad you found it useful 👍😁🇦🇺

I love these videos. I like to touch up on safety on the regular to help keep my digits. Thanks 👍

@diyforknuckleheads

2 жыл бұрын

My pleasure Ian! Thanks for taking the time to watch mate👍😁

Hey Uncle where ya been? We missed you. 45yrs in the business and still got all my fingers, just no hands to put them on!! Seriously tho, great vid as always, thanks, keep up the good work, and stay safe.

@diyforknuckleheads

2 жыл бұрын

😂😂...Thanks Paul 👍 Had some time off mate but getting back into it now 👍👍😁🇦🇺

Thank you Shane, always good to get these reminders.

@diyforknuckleheads

2 жыл бұрын

No worries at all Steve! Thanks for watching mate 👍😁🇦🇺

Very good tips. Thanks for sharing.

@diyforknuckleheads

2 жыл бұрын

My pleasure Ventsislav! Glad you found the video useful 👍

Thanks Shane, great tips, have only started using a circular saw confidently from your videos

@diyforknuckleheads

2 жыл бұрын

Good stuff Tony! Thanks for the feedback mate 👍😁🇦🇺

Thanks pal just got a circular saw great tips to keep me safe thank you!

@diyforknuckleheads

Жыл бұрын

No worries at all Rad...glad you found it useful mate! If you'e interested, you might want to check out my newly released Circular Saw Masterclass for Beginners. Loaded full of Tips, Tricks, Projects and Time and Money Saving Resources. Here's the link to get you started on your journey using your saw safely and more effectively. Cheers diyforknuckleheads.thinkific.com/courses/circular-saw-masterclass-for-beginners

Genuine safety tips. thanks.

@diyforknuckleheads

Ай бұрын

👍👍

Great tips, thanks.

@diyforknuckleheads

2 жыл бұрын

Cheers Edward! Thanks for the feedback mate 👍😁🇦🇺

Thank you for sharing your tips! I a newbie and haven’t used a saw yet. I want to make sure I use it safely!!!

@diyforknuckleheads

5 ай бұрын

No worries at all mate....Just take it easy and don't rush anything 👍😁🇦🇺

Thanks for you top 5 videos. Keep.up the good work👍🇨🇦🍺🍺😀

@diyforknuckleheads

2 жыл бұрын

Thanks Dan! 👍😁🇦🇺

I love my 20v Dewalt. I mainly use it for demo & rough cuts on construction lumber. It's powerful enough to get the job done, but very easy to mandarin control of at all times, even in sketchy situations. And the blade stops very quickly upon release of the trigger. I won't win any fine woodworking awards, but it's pretty much perfect for my needs.

It's always to have a safety reminder once in a while. Thanks.

@diyforknuckleheads

2 жыл бұрын

Cheers mate 👍😁

Thanks Shane another great video, just signed up for the course 👍 🇬🇧

@diyforknuckleheads

2 жыл бұрын

Awesome! Thanks for that Phil 👍 Stay tuned and l'll let you know when it launched 👍😁🇦🇺

Thanks for that. I'll be sure to review this before I unbox my still unused circular saw and give it go. I've also subbed to your mini course. The more I learn the more my fears will diminish, and one day I'll actually plug in the beast and do my first cut. Can't wait, Knackersss!

@diyforknuckleheads

2 жыл бұрын

Good stuff Darius! It's all about getting over the fear which is very understandable...thanks for subbing to the Mini Course....as soon as it goes live you'll be the first to know. Cheers 👍😁🇦🇺

Thanks Uncle Knackers for all of your wisdom and sense of humor. You are by far the most entertaining character on YT. I look forward to your videos more than any other person on the internet. ❤️ 🇺🇸

@diyforknuckleheads

2 жыл бұрын

👍😁....Cheers Dave! Really appreciate that mate 👍 Hope you're having a great weekend 👍😁🇦🇺

Congratulations on 299k subscribers by the way ❤ It'll be 300k soon! You're flying!

@diyforknuckleheads

2 жыл бұрын

Thanks Andy! Yeah getting close mate 👍😁🤞🤞

@sawdustandsurvival

2 жыл бұрын

@@diyforknuckleheads Haha, mines not a serious channel. Just a bit of fun as a hobby. I love the way you edit your videos though and I'd love to learn how to do it without spending all day. Maybe when the kids are a bit older and I've got more time on my hands when I'm not working I'll up my game a bit as I'll have more time to make videos and edit.

I learned a lot as a beginner

Great video mate.. thank you

@diyforknuckleheads

Жыл бұрын

No worries at all Mike! Thanks for taking the time to watch mate 👍😁🇦🇺

Great Tips, Nakkaa!!! Thanks, Mate. Keep'em Coming!

@diyforknuckleheads

2 жыл бұрын

Will do mate! Thanks for watching 👍😁🇦🇺

Great tips for everyone, I've had kickbacks now and then over the years, mostly because I was working on unlevel ground, no sawhorses or workbench. I made myself a workbench last year, so much better on my back that way😊

@diyforknuckleheads

2 жыл бұрын

It happens to all of us Susan 😬 Thanks for watching and well done on making that much needed workbench 👍🇦🇺😁

Another great video Knacks. I find that getting the blade depth right can make kickback a little less likely too. Love your work.

@diyforknuckleheads

2 жыл бұрын

Yeah that's a good one Vince 👍 Appreciate the feedback mate 👍😁🇦🇺

Thanks helped me with School!

@diyforknuckleheads

2 жыл бұрын

Glad I could help! 👍😁🇦🇺

Thanks for the necessary tips .

@diyforknuckleheads

2 жыл бұрын

My pleasure Stuart! Have a good weekend mate 👍😁🇦🇺

Your safety tips are good as gold. Especially because you don't just tell what to avoid, but you present a solution for very typical situations. One little bonus tip, that works wonders: Make your work bench heavy. It will stand more stable, it will not wander off when pushing with the circular saw. Even folding work stands can be weighed down with some bricks on a board.

@diyforknuckleheads

2 жыл бұрын

Yeah great tip re the Bench Andre! Thanks for taking the time to watch mate 👍😁🇦🇺

Ideal! Exactly what I need to build a timber fence this summer in Scotland! Cheers mate! 🙏

@diyforknuckleheads

2 жыл бұрын

My pleasure mate! Good luck with the fence 👍😁🇦🇺

Thanks for this video! I have a cordless circular saw (came in a tool combo set) but I've not used it yet. This video gave me some valuable info. Thanks again.

@diyforknuckleheads

2 жыл бұрын

My pleasure! Glad it was helpful 👍😁🇦🇺

Thank you. Everyone need watch this kind of video before working with circular saw.

@diyforknuckleheads

9 ай бұрын

👍😁...Thanks mate....appreciate the feedback 👍

Such a great video. There's a lot I didn't know there and you may have saved me an accident. It seems that so far I've been extremely lucky. When cutting sheet material I've been using polystyrene sheet behind it and cutting it on the floor. And on normal lengths of wood I've only had to cut end pieces, so only support one side. I can now see why this has stopped things from binding on me. If I didn't have polystyrene sheets to hand for sheet material, or if I needed to cut a piece of wood in the middle then I may have done the ways that you showed me can cause binding. BTW I do like your celebratory jazz "SKI-BOP". I do this occasionally at home and my wife hates it 😄

@diyforknuckleheads

2 жыл бұрын

We all have our share of luck Andy 😬 Appreciate the feedback mate and thanks for taking the time to watch 👍😁🇦🇺

Love this Guy. From the other side of the Earth. A learner still all fingers, Thank you 😍🤙 James in Dublin City .

@diyforknuckleheads

2 жыл бұрын

👍😁...My pleasure James! Glad you found the vid useful mate and thanks for taking the time to watch. Have a great weekend 👍😁🇦🇺

@jamesguinan

2 жыл бұрын

@@diyforknuckleheads you have a Great gift in teaching your Skills i am so blessed by the way you Deliver your lesson. You are a Amazing Teacher!!! Keep up your great Work. As you are also taking pressure off The Emergency Departments. 🏅👈

@diyforknuckleheads

2 жыл бұрын

@@jamesguinan Hahahaha...thanks James 👍😁

@jamesguinan

2 жыл бұрын

@@diyforknuckleheads I will watch it Again!!!! And maybe a 3rd Time For Safety Resons Only 🎯 be safe today brother and if your ever passing through this little City on a Walkabout you are allways Welcome. James.

As usual, good job mate !

@diyforknuckleheads

2 жыл бұрын

👍😁...Cheers Tony!

Defo watching that course

@diyforknuckleheads

2 жыл бұрын

It'll be well worth it mate! Stay tuned for details 👍😁🇦🇺

Awesome tips. 😊 Your "Dad " joke made me smile, but your facial expression immediately after is what made me giggle!

@diyforknuckleheads

2 жыл бұрын

😂😂...glad you enjoyed it Beverley! Thanks for watching 👍😁🇦🇺

Thanks for the tip. Never had a dad to teach me this stuff cheers

@diyforknuckleheads

2 жыл бұрын

My pleasure mate 👍😁🇦🇺

All good common sense. I'm happy that I already knew them, but it's always good to refresh my memory and check that I haven't picked up any bad habits (like yoga to hold something down that really should be clamped). Thank you for potentially saving a limb!

@diyforknuckleheads

2 жыл бұрын

My pleasure mate! I have to say that we all at times are guilty of practicing our yoga moves which can be to our detriment if things go wrong 😬 Thanks for watching 👍😁🇦🇺

Thanks Shane for the helpful videos. Hope everything is going good in Australia for you and your family 🤞

@diyforknuckleheads

2 жыл бұрын

No worries mate and all good over here 👍🇦🇺🇦🇺😁

This video is right on time. I recently took a carpentry course and I see a lot of guys misuse the circular saw and caused it to bounce. This video is beneficial. I love the accent and I learned a lot of Australian slang.

@diyforknuckleheads

2 жыл бұрын

Hahaha....thanks Mini Mum. Appreciate you taking the time to watch 👍😁🇦🇺

Always good to be reminded to work safely, thanks Shane. The joke? I agree APPAAAALLLINNNGGG !!!! 🙂

@diyforknuckleheads

2 жыл бұрын

😂😂😂.....mission accomplished Jim 😂 Thanks for watching mate 👍😁🇦🇺

Good show Unk!!!!!

@diyforknuckleheads

2 жыл бұрын

Cheers Mark! Appreciate you taking the time to watch mate 👍😁🇦🇺

Lots of great tips, Knackersssah!! Sorry to say that I'm guilty of a few of those. But with this video, I will be safe rather than sorry. Hope to see you at the wood working show in June. Cheers mate. 👍👍🍺🍺

@diyforknuckleheads

2 жыл бұрын

Cheers Chris! Yeah we all slip into bad habits every now and then mate and no doubt we've all had our share of luck 😬 Looking forward to Sydney...should be a hoot! Bloody bad news about Warnie today....bit hard to believe actually... Have a good one mate 👍😁🇦🇺

Love the pink saw horse 😉

@diyforknuckleheads

2 жыл бұрын

👍😁

Crazy how you put this video out a few hours after me getting some crazy kick back on my plunge saw!

@diyforknuckleheads

2 жыл бұрын

Good timing Robert! 😬 Thanks for watching mate 👍😁🇦🇺

An outstanding video, dude! Excellent tips to avoid injury, however, common sense...or the lack of it is a major factor! I've never used a circular saw, maybe I never will it if I do, I'll come back and watch this video first! Keep up the fantastic work, Chief! 👍

@diyforknuckleheads

2 жыл бұрын

Thanks as always Andy! Hope you're having a great weekend mate 👍😁🇦🇺

tumbleweed joke. Love it.

@diyforknuckleheads

2 жыл бұрын

😂😂

Nice one knackers. Good info well presented.

@diyforknuckleheads

2 жыл бұрын

Much appreciated mate 👍🇦🇺😁

Your dad jokes are great! I relayed this one to my pop, and he laughed good and hard. Thanks!

@diyforknuckleheads

2 жыл бұрын

😂.....Thanks Jonathan 👍 Glad your pop liked it mate 👍😁🇦🇺

Another informative and (as usual) funny video, Thanks!

@diyforknuckleheads

2 жыл бұрын

Thanks for that Krickette 👍 By the way, your card just turned up last week!....only three months late but it got here 👍😁...much appreciated and belated Christmas greets to you and your family as well 👍😁🇦🇺

@krickette5569

2 жыл бұрын

@@diyforknuckleheadsI wondered if it ever made it.

Thanks for the tips. And, you are a talented comedic man 🤣

@diyforknuckleheads

Жыл бұрын

👍😁....Cheers Alberto! Glad you liked the vid mate 👍😁🇦🇺

Another great one Knackers, Safety is always important, particularly for the hard of thinking!! I notice you use a Right Hand Blade??!! For a Right Hander, a Left Hand Blade is much better!! Keep em coming dear boy & my luv to everyone in the Colonises👍👍 🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧

@diyforknuckleheads

2 жыл бұрын

Cheers Old Boy 👍👍 When l first stated my apprenticeship back in the late 1980's all the boys had were right handed saws....as a result, with me being a left hander, l just got used to using one and have been using a right handed saw ever since 👍 We could do with some more salted Bully Beef over here so if you send some over that would be much appreciated 😂 Have a good one mate 👍😁🇦🇺

My biggest safety concern is my wife sticking out her foot to trip me up while I am not watching

@diyforknuckleheads

2 жыл бұрын

😂😂....gotta watch 'em L.H 👍

@princejohnisaacevangelio7344

Ай бұрын

😂pretty sure she knows you have insurance

@michaelmessuri7746

6 күн бұрын

just be extra careful if she starts asking if your insurance should be increased or if she thinks you might need additional insurance

Thank you very much , almost hurt myself today ,bcus it was my first time using this saw.. so thanks

@diyforknuckleheads

Жыл бұрын

No worries at all Karina 👍 Stay safe with that saw. Cheers 👍😁🇦🇺

Youve done allright knackas.... Youve done sllrighr mate...

@diyforknuckleheads

2 жыл бұрын

Cheers mate 👍😁

that dadjoke really got me..... best greetings from germany mate

@diyforknuckleheads

2 жыл бұрын

😂....Cheers Kevin! Glad you liked it mate 👍😁🇦🇺

Wow, that's super lucky. I had just used my Circular Saw for the first time and I didn't know why it had kicked back on me. I was super lucky because it shot to my face. Now I know that it was bound. Thanks for educating me.

@diyforknuckleheads

2 жыл бұрын

No worries at all Matan! Glad you came out of it OK 👍 Thanks for watching 👍😁🇦🇺

Good tips!

@diyforknuckleheads

2 жыл бұрын

Cheers mate! Glad you liked them 👍😁🇦🇺

I’m here for the Dad jokes but the safety tips are icing on the cake. All saw accidents are bad news.

@diyforknuckleheads

2 жыл бұрын

Cheers mate 😁👍🇦🇺

Thanks for sharing Uncle knackers. I have to cut some timber lattice tomorrow, I don’t have a circular saw but I suppose I will have to go with my hand saw or jig saw. Old Skool ……🙄👍

@diyforknuckleheads

2 жыл бұрын

Whatever it takes Brenda 👍 Good luck with the lattice and thanks for watching 👍😁🇦🇺

I nearly always press the like button on safety videos. This time, I pressed it after the dad joke. Thanks for the important vid.

@diyforknuckleheads

2 жыл бұрын

My pleasure Ofer! Glad you liked the joke as well 😂😂

I love the list of banana peels, skateboards, and garden rakes. So classic! Great tips overall, I have been guilty of a few of these.

@diyforknuckleheads

2 жыл бұрын

I've been guilty as well Luis 😬 Glad you liked the "trio" of trip hazards 😂.....l almost pulled a hamstring trying to do them 😂 Thanks for watching mate 👍😁🇦🇺

I'm a great believer in PPE Shane and I was surprised to learn recently that i shouldn't use my gloves when using a saw as the blade can catch the glove and draw my hand in. So pleased I learnt this from uTube and not from experience. Keep up the good work 👍

@diyforknuckleheads

2 жыл бұрын

Yeah Ian...that can happen mate 👍 Thanks for watching 👍😁🇦🇺

Thanks!

@diyforknuckleheads

Жыл бұрын

👍😁...G'day Dominique! Thank you SO much for the "Super Thanks"!!....really appreciate it 👍😁🇦🇺

@dominiquewieser3405

Жыл бұрын

@@diyforknuckleheads You're most welcome. I really appreciate all your videos, I find them very useful and quick to the point. Also like your personality and humor. I had a genuine laugh with the Nobel prize winner one. 😂🤣

Safety number one. I watch different chanels and always try to not skip safety tip videos. I liked woodworking yoga

@diyforknuckleheads

2 жыл бұрын

😂....Thanks Gior! I almost pulled a hamstring doing one of those moves 😂

I used my circular saw (a ryobi cordless) for the first time a few months ago when I needed to cut some yellow tongue boards to size to provide some flooring in my attic so I wasn't storing my stuff on the ceiling plaster. I probably did all the things you said not to do and I'm amazed I didn't end up hurting myself. I will hopefully be using it again (I've been inspired by a lot of your DIY project videos), and I'll definitely be a lot more careful next time

@diyforknuckleheads

Жыл бұрын

Thanks Simon 👍 Yeah mate you do need to be a little careful...it just takes one small loss of concentration to end up with a very bad situation. Cheers 👍😁🇦🇺

Hey Shane! Cheers! Long time mate! LOL @ 05:23, & 05:57! What a ripper, had me laughing my *bleep off! Excellent video, and I Than You for it. If it saves even one person from injury, it will have been priceless! Always remember when cross cutting, “blade side, waste side!” It’s not always practical, but should be adhered to whenever it is! So glad you are safe, and please stay safe and Healthy! Cheers Mate 👍👍👍👍👍✌🏻🙄🔨

@diyforknuckleheads

2 жыл бұрын

😂😂...Cheers for that George and l'll remember that saying as well....very clever 👍 Hope you're having a great weekend mate 👍😁🇦🇺

A good wake up. Every safety tip need to be taken seriously. My safety tip is if you have a perfect cut lined up stop and start again if you don't have all your PPE on. Those trip hazards were hilarious LOL. Thanks.

@diyforknuckleheads

2 жыл бұрын

😂 Thanks Matt and good common sense re the PPE! Cheers mate 👍😁🇦🇺

Good advice/tips, Uncle Knackers. "Professor Knackers!" Did you ever think that you'd see the day when you'd be a celebrated Professor? The world of academia may never be the same! BTW: Safety in numbers was a great Dad Joke. Thanks for sharing it and this video.

@diyforknuckleheads

2 жыл бұрын

😂....No...never....😂 Thanks as always for watching mate and glad you liked the joke 👍😁🇦🇺

Thanks for this important video. Not only for newbies like myself, but also as a wake up/freshen up video for all the experienced people who might even be more at risk than us ‘still a bit intimidated starters’. Because inattention is always just around the corner… There are SO many videos online with ‘hacks’ and stuff and all to often I see people with their fingers RIGHT NEXT to the spinning blade!! And they DARE to give advice !! Truly irresponsible!

@diyforknuckleheads

6 ай бұрын

Thanks mate.....and you're right, complacency can often lead to an accident. Thanks for watching 👍😁🇦🇺🎄

Thanks Shane, great tips. I've seen the odd tradie occasionally doing some strange yoga poses, including one bloke I saw balancing a board on his knee and trimming the end with a battery power saw. I used to think it doesn't look right but they're qualified and trained they maybe that's how they were taught to do it. After watching your video, it clearly wasn't right, he was taking a shortcut and it will come back to bite one day. One other thing, I knew about putting lengths of timber under large sheets, but I didn't know they were called gluts. Learnt a new word today. Thanks Knackers.

@diyforknuckleheads

2 жыл бұрын

Cheers Len 👍 Yeah l've seen some rather dubious things done in the past too mate....thanks for watching 👍😁🇦🇺

G'day Uncle. Very well presented. Love the Bad dad jokes. I hope you can continue the DIY For Knuckleheads tips and jokes for a very long time, Cheers. Oh! one tip from me...do not overstretch on a job. I did it. I will say no more.

@diyforknuckleheads

2 жыл бұрын

I think l know the outcome Ed 😬😬 Glad you liked the video mate and thanks for taking the time to watch 👍😁🇦🇺

BEST Dad joke of your UTube career! Going to use it!! Why are they called ‘gluts’? Great and valuable video Bob England

@diyforknuckleheads

Жыл бұрын

😂....Cheers Bob! In regard to why they're called 'gluts'......not sure mate 🤔 Thanks for watching 👍😁🇦🇺

Signing up right now for the Circular Saw Mini Course!

@diyforknuckleheads

2 жыл бұрын

Thanks Linda.....it will be well worth it! Stay tuned for details of the launch date 👍👍 Hope you're having a great weekend 👍😁🇦🇺

@lindam.9282

2 жыл бұрын

@@diyforknuckleheads You betcha!

@diyforknuckleheads

2 жыл бұрын

@@lindam.9282 👍😁

I seem to recall that your original video on how to use a circular saw was how I found your channel in the first place. ✌

@diyforknuckleheads

2 жыл бұрын

Awesome! Great to see that you've stuck around James 👍😁🇦🇺

Good tips! Loved the joke, of course! My own kids are reeling in their chairs groaning after I repeated it to them. Love it! Cheers, Scotty (Norway)

@diyforknuckleheads

2 жыл бұрын

😂😂...Cheers Scotty👍

awesome mate great tips hope ya well. we’ve all had that close call with the bloody things. one thing for me especially is always know what ya cutting underneath the product or on the other side. nail etc. a tip for ur new saw tips purchase will be for me especially was makita. my electric is right side cut/blade placement but the battery is left side cut/blade placement. may not be an issue for some but on shorter pieces of timber it’s annoying. take care mate.

@diyforknuckleheads

2 жыл бұрын

I know exactly what you're talking about mate. I've used one of those before and felt the same which is why l've been reluctant to buy the battery powered model 👍 Hope you're well Wes and are having a great weekend.....even though you guys are probably copping it with the rain today 😬

I subscribed for the dad jokes there amazing

@diyforknuckleheads

Жыл бұрын

😂😂...Cheers Bret 👍

Thank you sir, mason here and wood is foreign to me😅 have to cut some forms and had some kickback, this helps a lot

@diyforknuckleheads

2 ай бұрын

Glad to help mate! 👍😁🇦🇺

Great tips & dad jokes as usual! 1 tip i'd share is to use the saws depth setting every time.. avoids cutting things by accident, but more importantly it becomes much easier to follow a straight line/guide.

@diyforknuckleheads

2 жыл бұрын

Yeah great tip mate 👍 Thanks for watching 👍😁🇦🇺

I had a circular saw kick back when it hit a hidden knuckle in the wood. Fortunately, I was not standing directly behind the saw at the time. Great video - well presented

@diyforknuckleheads

4 ай бұрын

Thanks mate and yeah you're right.....you gotta be careful 👍

Loved the video unc!!! I always live the dad jokes🤣🤣🤣. Ive had my saw for about a year now and i always use these tips and nothing happend yet, also i just use an old plywood sheet that i have to cutt on because its easy and everything is supported. I signed up for the course and im curious unc!!! Have a great week🍻🍻

@diyforknuckleheads

2 жыл бұрын

Thanks as always Rushill and great tip re the plywood support sheet 👍 Appreciate you signing up for the course too. I'm still making it but as soon as it's done l'll let you know. Cheers, Shane 👍😁🇦🇺

@RPmusic06

2 жыл бұрын

@@diyforknuckleheads cheers unc!!!! thanks for setting something up l;ike this!!

@diyforknuckleheads

2 жыл бұрын

@@RPmusic06 My pleasure mate 👍👍

OK, you got me. When you watch two videos on a channel and they're both excellent then it's time to subscribe! Plus I've just bought a load of cordless Makita gear for my new house, and I play guitar and want to keep all my fingers if possible.

@diyforknuckleheads

2 жыл бұрын

Awesome! Thanks for the Sub mate....hope you can stick around for many more to come 👍😁🇦🇺

As a beginner I really appreciate these tips. I think I'm guilty in doing all the things you demonstrate! Those examples of what one can trip in 😅😅.. Now if I'm allowed to make a suggestion for a future video, I could really need a bandsaw safety tips video. Cheers Shane, take care.

@diyforknuckleheads

2 жыл бұрын

Cheers Jesper! From what l've seen from you, you are far from a beginner 👍👍👍 Good idea re the bandsaw mate....one problem....l don't one a bandsaw 😂 Thanks for watching mate 👍😁🇦🇺

nice video. Wish I'd watch it before I lost my thumb.

Glad you avoided any injury, Shane. KZread wouldn't be the same without some Knackers every now and again. Also can I offer my deepest condolences to your great nation on the death of Shane Warne. He may have been a pain in our Knackers during his career but he was a real sporting legend and a great ambassador for both Australia and cricket.🏏🇦🇺✝️

@diyforknuckleheads

2 жыл бұрын

Yeah Mick...it's quite hard to believe that he actually died. It's a Steve Irwin moment for sure. Naturally it has totally dominated the media over here for the past two days....he was an Aussie legend and at only 52 he certainly made the most of his life.... Thanks for watching mate 👍😁🇦🇺

Hi, good Magician! What a joy to see you again! What about clothes and wire support? Sure it does make sense! See you, good luck!

@diyforknuckleheads

2 жыл бұрын

Hi Alex! Thanks for watching mate 👍😁🇦🇺

I was wondering if you were going to address the safety squints, great tips Knackers!

@diyforknuckleheads

2 жыл бұрын

😂...Squinting is an essential part of any PPE 😂 Thanks for watching Grant 👍😁🇦🇺

Nice one knackers!!

@diyforknuckleheads

2 жыл бұрын

Cheers mate 👍😁🇦🇺

Great tips. Loved the dad joke :) Thank you Sir!

@diyforknuckleheads

Ай бұрын

👍😁...No worries at all Christian.....glad you liked the gag 😂 Cheers 👍😁🇦🇺

Uncle knackers! You’ve done it again 🤜🏼🤛🏼 great video!! I think it’s time to build new sawhorses…. Can’t you please do a video

@diyforknuckleheads

2 жыл бұрын

Cheers David!.....mate you've read my mind, it is most likely going to be my next video 👍😁🇦🇺

@davidespinozareyes2150

2 жыл бұрын

@@diyforknuckleheads YES!👏🏼👏🏼👏🏼 I’ve still got my sawhorses! I watched your video and followed every step! So rewarding and I loved putting it all together! Thanks mate 🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺❤️❤️❤️❤️❤️🤜🏼🤛🏼