Jason, do you still have these fenders? And do they make a wide version? Are they removable?

@AutoEdits

2 жыл бұрын

I do still run the fenders and love them. These are the wide version and yes they are removable.

@peterlangevin4602

2 жыл бұрын

@@AutoEdits Thanks! Love your channel.

Love your attention to detail, and ability to show camera angles properly so we can actually see what you are doing. Thanks!

I'm a student from China and a big fans of the Jeep Wrangler. I think your videos are the best videos I've ever seen before!!!Looking forward to your next video.

This guy is a natural presenter...

@AutoEdits

6 жыл бұрын

Well, thanks a bunch! You are awesome!

i don't own a wrangler , but it''s an absolute enjoyment to watch the well plan and skilled Installation ! thanks !

@AutoEdits

8 жыл бұрын

Allright, Thanks a bunch!

Your videos have become the before bed entertainment for my daughter and I. We both love them. She's not three yet and loves jeeps. Can't wait for more videos.

@AutoEdits

8 жыл бұрын

Awesome to hear, glad she likes the Jeeps already and will try to do more!

badass flares but damn the inside aluminum shielding looks tacky as all hell.

I think the step up design is a great way to add clearance, very cool. And looks are even pretty good. Great video to boot.

You know you're subscribed to a great channel when you like the video before you watch it! Great video man, keep em coming!

@AutoEdits

8 жыл бұрын

That there is much appreciated!!!!

Jeep looks awesome! Great video can't wait for the next one!

Man I am so looking forward to your lift kit install. I check your channel every day! This Jeep is very cool and can't wait to see the mods as they happen. Thanks for posting.

@AutoEdits

8 жыл бұрын

Thank you so much for watching and taking a minute to say hey!

Love the fenders and love the videos. Keep em coming!

I recognized the background in some of your videos. Your Jeep looks great! I drive a 2000 TJ on 35" KM2's and we wheel a lot of the same runs. Keep the videos coming.

You make it look so easy now I want a jeep. Good vid man!!

Your videos are so well put together! Good job man

@AutoEdits

8 жыл бұрын

Thanks!

I'm loving this series, keep up the good work!!

@AutoEdits

8 жыл бұрын

+Wesley Bridges Will do, Thanks!

Your Jeep is really coming together nicely!

@AutoEdits

8 жыл бұрын

+ognaysayer I'm liking it so far...we'll keep it going!

CAN'T WAIT for the next vid.. keep it up!

@AutoEdits

8 жыл бұрын

Hopefully soon!

This jeep is looking pretty awsome. Great video, can't wait for the rear and how it will look.

@AutoEdits

8 жыл бұрын

Me too!

Great install those fenders look awesome!

Great video! I'm looking forward to your next.

@AutoEdits

8 жыл бұрын

+bakerm1972 Thanks!

AWESOME! One of your best videos.

@AutoEdits

8 жыл бұрын

Howdy POP! Glad you checked it out!!!

Dude I freaking love your videos!!!! Your videography is very good and your Jeep is even better!

@AutoEdits

7 жыл бұрын

Awesome! Thanks so much

Fantastic video. Keep the goodness coming!

@AutoEdits

8 жыл бұрын

Thanks! Will do!

Fantastic video!!

you make the best videos. keep up the awesome work!!!

Great video. keep up the good work

Great video to explain the install

Jeep's looking great!!

@AutoEdits

8 жыл бұрын

+My Jeep Running Over Things Thanks so much! i can't wait to get the rears on next weekend!!!

They look great but I can't help but notice that the inner fender liners look piece milled together. Wonder if some black paint/powder coating wouldn't make that less noticeable. Of course none of that is your fault, just the design of the kit, and other than that they look great!

They look great

I think I would paint those inner fenders. I know they wont rust or anything, I just dont like the look of them in silver. Those fenders are awesome.

@AutoEdits

8 жыл бұрын

+Stuka87 You might be right...they are pretty bright. Once I get the rears on next week, I'll give it the final eye!!!

Another quality video!!

@AutoEdits

8 жыл бұрын

+notbaylor Thanks!

Good Job, Very interesting and funny video!

looks great!

Jason, great job on the videos, I am enjoying watching you beef up your jku. mine will be there one day too. keep up the good work. Jeep wave from Florida.

@AutoEdits

8 жыл бұрын

Awesome to hear, thanks so much for saying hey! Jeep wave back!

I'm always finding myself always watching your vids I think your jeep looks pretty sick iv got the same jeep rubicon.

@AutoEdits

8 жыл бұрын

Thanks for checking out the videos! Congrats on our Rubicons!

Builds coming out awesome! -Z

@AutoEdits

8 жыл бұрын

Thanks dude!

"and that is a GREAT idea, but I'm not going to do it." Haha sweet videos. I hope I get to put money into my JK someday.

Metalcloak makes awesome products!

You make some great videos....

that is some tuff fenders and you made the install look easy. good job brining us this video. I have to ask again you said something about large marge I have not forgotten that project so huh still waiting.

@AutoEdits

8 жыл бұрын

+Joe Moreno Large Marge will be back in the mix soon! Just got some important parts for the steering.

wow looks awesome I've been thinking getting a JK since i have an XJ already, as always good videos, Keep it up ;)

@AutoEdits

8 жыл бұрын

Build that XJ!

@josueabisaiorozduarte2487

8 жыл бұрын

+autoedit Its already built, 33s, Roof Rack, LEDs, nice Bumper and all of that, i just want a JK :D

A tip for easier drilling through sheet metal is to use a Unibit instead of a standard twist drill bit. It won't catch and cause headaches and drills a much nicer and rounder hole.

I was able to install the passenger side inner without doing any cutting. The harness can just be routed between the aluminum piece and the firewall.

Following this is kinda fun. I love those fenders! Kinda regret going with the XRC armor after seeing yours. Very nice!

@AutoEdits

8 жыл бұрын

+Strikerage Thanks, I was looking at the XRC stuff and it's pretty tough looking stuff!

@Strikerage

8 жыл бұрын

I just liked the look. But really nothing beats Metalcloak right now.

Awesome vid!!! Throw the frisbee!

@AutoEdits

8 жыл бұрын

+rogerst23 Woohoo for Pinto and thanks!

Great Job!

@AutoEdits

8 жыл бұрын

+Zaven O'Bryant Thanks a bunch!

You're next project should be putting on a LED Bar light, it will look more amazing.

Very happy to have found your channel, I've really enjoyed your videos. My question here, are these the Standard, Narrow, or Wide flares?

i love this video because of your lovely Dog!

@AutoEdits

8 жыл бұрын

Yeah for Pinto!

You are pretty handy,and job well done.

@AutoEdits

3 жыл бұрын

Why thank you!

MetalCloak Fenders are awesome, they look so good on wranglers

Fenders look AWESOME. However, the Fender Well Liner...not so much.. those gaps look like something is missing. Great videos as always.

@AutoEdits

3 жыл бұрын

Thanks for watching!

Autoedit. Great videos again. Is this fender type also in a little wider type. here in Norway the fender need to be in top be the same with as tire.

Awesome. I'm getting those fenders. What size Wheels is that ? My JK came with aftermarket 18" wheels with 35" tires, but I prefer the look of those same type of wheels on your JK.

I kind of like the look of this. Just can't bring myself to drill new holes and cut on my Jeep. Wasn't cheap!!

Jason, Do you have any rust issues, and if so, how do you deal with it. I installed the MC Overline Fenders (BPC) on the front and the back with in the last few months, and they are already rusting. Thanks.

Where did you get the refrigerator from? This was a pretty cool video. I have watched several video's of you and your Jeep.

That amber lamp/reflector combo you took off from the original might be needed depending which state your from

The front view is SEXY! Now I need a pair for my TJ! 👍

@AutoEdits

6 жыл бұрын

Yes you do! LOL

your jeep keeps getting better and better. are you planning on any videos of large marge anytime soon?

@AutoEdits

8 жыл бұрын

Thanks, Yes Mustang is coming up in the next couple of weeks!

Would look nicer with those inner fender splash shields painted black. Very beautiful Rubicon though. You did a nice job on it & it'll turn a lot of heads.

I was browsing around for some tube flares. This vid?... SOLD! You have a pretty awesome rig. :) A lil' bit out of topic, where did you get those glasses? They look great. Thank you very much!

@amperesi9576

5 жыл бұрын

Rod Jos glasses should be these by arcone. ArcOne G-FLY-A1101 The Fly Safety Goggles www.amazon.com/dp/B003WE9ZGG/ref=cm_sw_r_cp_apa_NFhYBbWPHJZRS

Does your state not have a fender law? Those 'fenders' don't seem to cover much. How much tire splatter do you have?

Well done. Inner fenders would look nice If powder coated gloss black.

@AutoEdits

3 жыл бұрын

I agree... just keep not getting around to it... four years later...LOL

Their website lists them as either raw metal or black powder coat. I can't find a picture of them in raw metal. I assume you got black powder coated. How do you like them so far?

I just realized you still have stock suspension. Give me more confidence to not need a lift. The bigger tires seem to give you enough. How does it drive on the highway?

Nice vid👍 I am a Wrangler wannabe, it looks awesome. The eye protection you use, what are they?

good taste picking those fender flares ! how much you pay for the complete set?

Glade to hear old large Marga is getting some love too. Really curious as to how the blown 302 runs with EFI. Also how all the suspension works A lot was done to the suspension it basically has completely new geometry Especially at the rear !?!?!...

@AutoEdits

8 жыл бұрын

I am really excited to get Marge back on the road too!

I'm really curious as to why you didn't remove the wheels and get them out of your way, particularly when you put in the fender lining panels.

G'day mate! What suspension will you be putting On this rubi? Will you DIY? If so I would love to see the vid. Thanks

Awasome prducation

Did the tires rub anywhere else other than the pinch seam on the rear? Fun vids

As so many already said - great video a and series. BTW- what time can I swing round so you can get started on my own?😀

@AutoEdits

8 жыл бұрын

Lol, I guess I can start taking appointments!

Are those the 6in or 8in highline fenders??

Were these the standard width over line fenders, or the wide? Love the install video! Thank you!

@AutoEdits

Ай бұрын

I think these are the wide.

How long did it take to do all 4?

Are those the standard or wide width fenders?

@autoedit - interested at all in selling those flares you took off?

Now just waiting for youtube to process the video!

@AutoEdits

8 жыл бұрын

+Hunter Smith I just noticed that it's pretty slow catching up today...thanks for hanging in there!

@huntersmith5825

8 жыл бұрын

Anytime! I love the vids your putting out!

Did you ever do the rear fenders? This video was great!

@AutoEdits

Жыл бұрын

I sure did...kzread.info/dash/bejne/g6qGmKOap5Wwfrg.html Thanks!

Subscribed!....great DIY vids. Learning a bunch from you...bought a used JK last year...and slowly building it out. What's your mileage with the 37's?

@AutoEdits

8 жыл бұрын

Not very good...staying around the 14 range right now.

You guys are gonna make me rob a bank and if I get away with it I'll buy me a nice JEEP.. LOL geat video!

Hi Jason, do you get a lot of spray onto the windshield from these smaller fenders?

@AutoEdits

5 ай бұрын

If you mean in rain going down the road... not at all. Every once in a while when I was in serious mud, it would flip some onto the hood and down the side of the jeep.

Took long enough 😂😂 I was waiting forever

Nice

I am personally not a huge fan of the aluminum panel. Maybe it would have been much better in a darker color.

@sharonwhite1505

5 жыл бұрын

That's what I said ...

@davidswanson9606

5 жыл бұрын

Yeah I’d recommend getting it anodized black at a shop they knows how or getting a kit and doing it yourself.

Audio on the voiceover sounded really good, what mic did you use?

@AutoEdits

8 жыл бұрын

+notbaylor That's just my cheap lav mic. that I use for the videos...just plugged into my computer. I think it's an e100.

Any reason why you went Overline vs Overland aluminum? It's the interior brackets that truly motivates me. Been looking for the poison spyder aluminum, due to strength, but are discontinued. I can't be adding anymore weight with steel. Also, just sharing. I was somehow unsubscribed to your channel... and I know I've been subscribed. As always, thanks so much!!

@AutoEdits

5 ай бұрын

I will never argue against saving weight BUT... I just built this Jeep with every bit of armor I felt it needed and it handles the weight just fine. So, if you have the money to buy aluminum and save a pound or three, go for it! This Jeep feels absolutely nimble like it is and I have bashed it into stuff plenty of times with great confidence.

are you using the metal cloak narrow, standard or wide overline fender flares? and is that a full length front bumper ? Im looking for fender flares for my full length bumper

@AutoEdits

4 жыл бұрын

These are the wide option from metalcloak.

Are there side maker lights?

Just stumbled across this video......can you tell me more about the JKU-lift, tire size, etc., I see it's got factory Rubicon wheels-are you running spacers or ? as the track width looks wider. Thanks,

@AutoEdits

Жыл бұрын

Howdy and welcome. It would be much easier for you to scan through the complete build in this playlist kzread.info/head/PL_oEM8z39tKA42LI4tG8oTVfKFkVBHhQa

@steveg1122

Жыл бұрын

@@AutoEdits PERFECT, thanks for that

They look sick! Definitely agree with the others and would paint the inner liners black. Also where did you get those safety goggles? And do they fog up?

@AutoEdits

8 жыл бұрын

Thanks, probably will paint them and the goggles came from my local welding supply shop.

So the setup you put on is the Overline tube fender and the hi-clearance quick release front flare standard edition?

@AutoEdits

6 жыл бұрын

Yep!

Another great vid. What made you go with hard top instead of soft?

@AutoEdits

8 жыл бұрын

That was simply a case of finding a used Jeep at the right price with a manual transmission but now that I have it, I like it!

@The_ClayDayz

8 жыл бұрын

+autoedit Well that was easy enough. Hope it will be that way for me. Any problems with the top leaking? Do you take it off much?

Looks great, don't even need a lift now

@koraironams4656

8 жыл бұрын

+hyeabud it rubs still lol

how much power loss did you lose going to 37 inch tires

hey love your jeep where did you order you inner wheel wells?

@AutoEdits

8 жыл бұрын

Metal Cloak