Watch to the end to check out the before and after comparison!

@abdullahkaison3263

3 жыл бұрын

Dont know if anyone gives a shit but if you guys are stoned like me during the covid times you can watch pretty much all of the new movies and series on InstaFlixxer. Have been watching with my brother these days xD

@tristenmagnus9534

3 жыл бұрын

@Abdullah Kaison Yea, been using instaflixxer for since december myself :)

Great information, very helpful for me and my project. Looks amazing with lots of extra room for tires and flex. Well done! ✌️

@RedRockCrawlers

5 жыл бұрын

pwrofgrayskull i appreciate it. I'm glad this helped and I agree they will help a lot with flexing

Nice truck job well done just got my finders now I want to paint them

Looks great, nice work!

@RedRockCrawlers

5 жыл бұрын

CC 76 thanks! Changes the look of the Jeep completely

Completely changed the look especially with the color match powder coat. Nice job and nice Jeep.

@RedRockCrawlers

5 жыл бұрын

completely different look isn't it. Thanks for the kind words

Looks amazing! Great job! I like the width and the look!!

@RedRockCrawlers

5 жыл бұрын

Awesome thank Darrin! Just trying to keep with you ;)

@BigDMellor

5 жыл бұрын

Nah! I want to get rid of the plastic fenders and go with something like this. I like it!

Love it they look awesome

@RedRockCrawlers

5 жыл бұрын

I appreciate it, i'm happy with the turnout.

Very nice !

Dang, that looks Sweet!

@RedRockCrawlers

4 жыл бұрын

Todd Kirst thank you. They turned out great and gave me the extra room I needed to run 37s

Looking forward to seeing the 37's.

@RedRockCrawlers

5 жыл бұрын

you and me both!

Looks great being color matched. Love seeing someone else running white letters. I’m a big fan of white letters. Buying new tires this month and will need to paint my own white letters as so many companies have quite making them.

@RedRockCrawlers

3 жыл бұрын

Check out Tirestickers.com

Looks sweet

Looks great! Definitely looks better than the airplane wings. 😁

@RedRockCrawlers

5 жыл бұрын

Jeff Boyd haha! Totally agree

Looks good. You may need to cut the back pinch seams when you go with 37s. I went with Gen Right fenders and inner liners on my 2016 JK. Color matched the fenders. Love the look.

@RedRockCrawlers

5 жыл бұрын

Mike Hoffman thanks I'm happy with the way they look installed. Much better then on the garage floor 😂. Yeah I may need to trim with buffet tires

Fenders look great! It looks like you need to trim the rear pinch seam still. It would probably rub there before the bumper.

@RedRockCrawlers

5 жыл бұрын

Yeah i might need to do that. I do have an extra inch of clearance back there with the lift i'm running. so i might be able to sneak by. I guess we'll see

Awesome. See you in Moab.

@RedRockCrawlers

5 жыл бұрын

Chuck Zechman awesome! See you there

Great looking fenders! Agree with another poster’s assessment, for 37’s you’ll need to trim the pinch seam on the anterior side of the rear wheel well to avoid rub.

@RedRockCrawlers

5 жыл бұрын

MsEmmaHale possible. A lot of people do that. I was able to push the rear axle back another 1" so i have a good amount of clearance there now. I'll know when I get the tires mounted.

@msemmahale4608

5 жыл бұрын

I’m still learning, so forgive the question if it’s basic - you pushed the rear axle back with longer control arms?

@RedRockCrawlers

5 жыл бұрын

MsEmmaHale exactly. With the Rock Krawler X Factor lift the control arms are fully adjustable so I extended them 1" to push the axle in a better location.

@adidas4275

4 жыл бұрын

Love the use of anterior. Well done 💪🏽👏

Looking pretty sick. Time to to for a rip there bud

@RedRockCrawlers

5 жыл бұрын

Ari Paterson thanks. I agree it's time to go Wheeling!

Nice lookin fenders. What brand are they I don’t think I herd that ??

Nice

@RedRockCrawlers

2 жыл бұрын

Thanks

You want chips from rocks being thrown up from the tires? I think it's nice to have them close to the width of factory.

These r same fenders I've been wanting,I like the color match,I have the standard black hardtop so can't decide on painting black or my Cosmo blue I painted both my poison spyder bumpers blue

@RedRockCrawlers

5 жыл бұрын

Rick Feemster go with the blue! I don't know if you take the hard top off much but I think it would look good with the blue fenders with or without the top

@rickfeemster2387

5 жыл бұрын

@@RedRockCrawlers yeah I was thinking same thing since I already painted bumpers

@RedRockCrawlers

5 жыл бұрын

@@rickfeemster2387 Do it! and send pictures haha

Fenders look awesome! I just picked up aluminum ones also gonna leave mine black. Quick question. What about the fender supports? Mine have two supports for the rear and two for the front. Also what brand are these?

@RedRockCrawlers

5 жыл бұрын

jason kus thanks I'm happy with the outcome. These are Aries Offroad fenders. Didn't come with any inner supports.

@jasonkus4510

5 жыл бұрын

Mine are safariland and came with supports. The fenders and supports are identical to Poison spyder. I think you can buy supports from poison spyder. So the main fender doesn’t flex on a hit. Again love the look!

@RedRockCrawlers

5 жыл бұрын

jason kus that's good to know. I actually thought about looking into just getting the supports for that very reason

Those fenders look great

@RedRockCrawlers

5 жыл бұрын

Thanks Hector! i'm happy with the outcome.

@hectorserrano7703

5 жыл бұрын

@@RedRockCrawlers I dont like the look of a lot of aftermarket fenders but those are nice. Best of luck with the jeep.

I was wondering if you know what the backspacing or offset of your rims are?

those look great i almost got those but went with the safaripal aluminum with same reinforcements that the poison spyder has for almost 1/3 the cost

@RedRockCrawlers

5 жыл бұрын

rob_RT I've never heard of Safari pal until this video. I'll have to look at them. Have you installed yours yet?

@pitbull62

5 жыл бұрын

Red Rock Crawlers yes they’re installed. Super sturdy. Best part aluminum!

@RedRockCrawlers

5 жыл бұрын

@@pitbull62 awesome! the aluminum is the way to go, light weight and no rust

Just curious...I installed plastic Bushwacker flat fenders last summer. Lately, I’ve been reading about how dirt and grit eventually work their way in between the fender and sheet metal and wear away the paint which leads to rust. Some folks have put down a barrier between the body and fender like clear 3M tape or a gasket type thing. I didn’t notice that there is anything between the Aries fenders and body - is there no rubbing / corrosion issue with these fenders?

@RedRockCrawlers

5 жыл бұрын

i think plastic fenders tend to vibrate and rub more than solid metal fenders. I'm not saying that won't happen with metal fenders. But if you noticed in the video i had to repaint a few spots because the plastic factory fenders tend to rub a few spots raw.

Do you happen to know the color name of the powdercoat? I read somewhere that "wheel red" was a match but wanting to confirm. My Jeep is red also and I want the fenders to be colormatched. Thanks!

@RedRockCrawlers

3 жыл бұрын

So the color code for the Jeep body is PR4, thats what I told the powder coat company when I dropped them off. They matched it off that. Hope that helps

Looking good. Where did you got them? Any links?

@RedRockCrawlers

2 жыл бұрын

thanks, I think they look so much better than factory. They aren't available where i got them any longer, but I think you can actually get these on amazon.

Debating on between the aluminum and steel. How has yours held up? Would you still go with the aluminum option now after having them this long?

@RedRockCrawlers

2 жыл бұрын

I would always go with aluminum, less weight, no rust! the've been great

What side marker light did you install in your inner fender?

@RedRockCrawlers

4 жыл бұрын

I got the on amazon. LED amber marker lights.

Are you happy with the width of the fender or would you prefer the narrower? I have a chance to get the narrow fenders.

@RedRockCrawlers

Жыл бұрын

Yes the width is great for me. I would get narrower if I could because I don’t do much mud. But I’m in Utah and I would be a target for the Highway patrol if they were narrower.

What brand flares are they ? I have Poison Spyder front flares bought them a year ago just purchased Poison Spyder rears I hope have had a difficult time locating a pair apparently Poison Spyder isn't fabricating anymore , hopefully I will receive the rears and I'm planning on having mine shot with truck bed liner paint my flares are bare aluminum.

@RedRockCrawlers

Жыл бұрын

these are a brand that I don't think are made anymore. they are very similar to Poison Spyder

Where did you get the side blinkers from

@RedRockCrawlers

4 жыл бұрын

got them off amazon

better bring that paint to EJS.. were gonna leave a few marks

@RedRockCrawlers

5 жыл бұрын

SamJosh Cohen haha no kidding. We'll need it I'm sure!

Fenders look amazing! I have a red rubicon as well. Did you paint the hardtop or get someone to trade you?

@RedRockCrawlers

5 жыл бұрын

Nathan Clodfelder they do make a big difference don't they. I traded hard tops but I know people do paint them.

Did you get your hard top painted to

@RedRockCrawlers

5 жыл бұрын

tom adams I actually traded a guy who wanted a black top. Worked out good 👍

um, i just checked, poison spyder's front fender flares in aluminum are only $20 more than the aries... and they have all that extra bracing. glad you like the aires, thou. the rears are $40 more for the poison spyders...

@RedRockCrawlers

5 жыл бұрын

dobrzpe where are you getting your price comparison? The Poison Spyder aluminum fenders are $580 per set. $1160 for all 4 right. I just looked. I bought these for about $500 for all 4. Less than half.

@pitbull62

5 жыл бұрын

poison spyder is out their minds....but people pay for the name

@RedRockCrawlers

5 жыл бұрын

rob_RT haha I can understand buying the brand name parts for some things. But I had a hard time paying more than double for something like fenders

@dobrzpe

5 жыл бұрын

@@RedRockCrawlers from the Ariesautomotive website = 1,095.22 for all 4... guess you got a deal...

@RedRockCrawlers

5 жыл бұрын

dobrzpe ah that makes more sense. Their prices must have gone up. 🤷🏻‍♂️

Did u add rear fender liners?

@RedRockCrawlers

2 жыл бұрын

no I haven't. I figure they're not really needed since the rear fenders are already enclosed

Oh man those tires are beat! Lol I’m way to impatient to get my tires down that far! What are you thinking you want to put on for new ones?

@RedRockCrawlers

5 жыл бұрын

T T haha I have another year or so on these! I'm thinking of going with Maxxis RZR.

WHERE CAN I GET THESE FENDERS

@RedRockCrawlers

5 жыл бұрын

Jimbo69 I bought them on Amazon. But Aires Automotive has a website

how about that pinch weld? looks like it could slice right down the middle of the tire!

@RedRockCrawlers

2 жыл бұрын

good question. Many people trim the bottom corners to avoid tire contact. I did a flex test to see if it was rubbing and I had not problems so I left it alone

@ClownWorldInvasion

2 жыл бұрын

@@RedRockCrawlers thanks for the reply, my 2 door definitely has issues with that pinch weld luckily the Rubicon rock sliders hit the tire before the pinch weld does. So a trimming of both are in my near future

@RedRockCrawlers

2 жыл бұрын

@@ClownWorldInvasion yeah thats worth doing if you're rubbing. Don't want to ruin tires or body.

Do you have a link to where you got those fenders from?

@RedRockCrawlers

2 жыл бұрын

Unfortunately they aren’t sold there anymore.

@paulharris6332

2 жыл бұрын

@@RedRockCrawlers oh okay! What brand are they?

What brand is that inner fender?

@RedRockCrawlers

2 жыл бұрын

Those are the Artec Inners

Where did you find all 4 for 500$?

@RedRockCrawlers

3 жыл бұрын

I bought these on Amazon. But I do believe the price has gone up a bit

Does anybody know what brand this fenders are?

@RedRockCrawlers

2 жыл бұрын

I know what brand they are 😉

@JuanCruz-dt9rb

2 жыл бұрын

Sorry Einstein, I guess you didn’t understand my question!

Should cut that factory bracket off you’ll get more clearance you don’t need it it cleans up the wheel well

@RedRockCrawlers

5 жыл бұрын

Gold Diamond the fenders bolt directly to that bracket so I left it. I think it may help with rigidity