Installing Hyline Inner Fenders On My Jeep Wrangler
It was time to get rid of my Rattling, loose, and cheaply designed DV8 inner fenders and replace with them with a higher quality set. I decided to get a set from Hyline Offroad, they make great products, all made here in the USA.
These are designed to fit the Jeep Wrangler JK, and they also make sets for other models.
www.hylineoffroad.com/jeep_pa...
They are available at multiple retailers for a lower price .
Inner fenders are almost a mandatory upgrade after switching to aftermarket fender flares. The factory plastic liners become flimsy, and sometimes even rip off. Yes I know these Hyline liners are a little pricey, but they are worth it.
I no longer have to worry about my tires contacting my inner fenders during flex. These also allow you to fit multiple aftermarket shock options, including the Teraflex Falcon shocks.
I hope you enjoyed the video, please make sure to give it a thumbs up and subscribe!
Stay tuned for more videos! Next up, it’s time to test out the Gladiator with 35s.
Пікірлер: 138
I hope everyone has a great weekend! What’s your next Jeep project or trip?!
@7CitiesVapesHampton
5 жыл бұрын
Installing my rock sliders this weekend. ordering new fenders this upcoming week. Been adding little things over the last 2 weeks iv owned my JKU. I am guessing your in VA what part?
@JKGearandGadgets
5 жыл бұрын
I’m up north of Yorktown
@bencrick6302
5 жыл бұрын
Headed to jeep invasion at the smokey mountains with some friends at the end of August.
@702cyco
5 жыл бұрын
Trail Hero, Hump & Bump.... Upgrades junk yard tons on 2017 JKUR
@7CitiesVapesHampton
5 жыл бұрын
@@JKGearandGadgets Nice im in Newport news, didnt know you were that close to me. Would be cool to meet ya in person
That looks awesome!!!! Next Monday I’ll buy my first Jeep Wrangler, it’s a 98 TJ, 180,000miles
Never heard of highline offroad before and i will 100% be checking them out now looks awesome!!!!
I did these a couple months back replacing my Artec’s. Soooo much better.
Had my hyline inners for 2 months now and love them. Gave me room for 35s with no lift....for now ;) Enjoy watching your vids man.
I installed my front rock lights behind the mesh insert. Cool look at night.
@JKGearandGadgets
5 жыл бұрын
I’ve seen that a few times. Good look!
Great vids. Love how you clean the tires when showing the new fenders. Thanx for vids.
Thorough , easy going, and full of great install and product videos.
if you put that LED rock light in the front wheel well on the front top spring perch, you could point it forward and get some good light right in front of your tires. There's a nice flat spot there and you won't have to worry about the tire contacting it.
They look Awesome and HD I have a jk like yours and ready to upgrade my fenders and lines soon love your videos. Keep them up!
I made the exact same liner change. The DV8’s rattle and just not a tight fit. The Hylines are an excellent fit.
Ordering these now. They look great and are functional. I held out before now on getting inner liners as i felt they were just for looks and some were way to flashy.
Great upgrade from the DV8s
I have those on my 07 JKUR with front coilovers. I love them. Took some minor trimming here and there but nothing too difficult.
You need a shop for those winter days that are coming. Great video by the way. Keep them coming.
oooh, those look nice, but I am pumped for the long arm series!!!!
I personally appreciate a nice little box and can see why you went for it.
Looks great 👍🏻
I like the video, on my 08 JK I went with the Rough Country brand and love them. I would suggest Uwaharrie for the run..... see you there.
Very nice!! Been looking at doing some myself. Will have to check them out. I'm heading up to Rausch Creek Friday. Got some Buddies from here in Central NC going and meeting some guys from NY as well.
Nice vid Ben. I also have the HyLine vented hood & say that it definitely works, it’s not just for astetics!!! Besides, gotta support a local PA company. I just got Fox shocks, MetalCloak control arms & Adams driveshafts installed this week. Weather permitting I will be at Rausch Creek in a few weeks & cannot wait to see how my girl handles. Enjoy your weekend brah 🤙🏾🤙🏾🤙🏾🤙🏾🤙🏾
Diplo at 5:34. Good stuff Ben!
Those look great
Having the same issues with my Dv8 inner fenders also too much rattle! Gonna look into getting these, they look really nice! Thanks for another great video and another dent in the wallet!
@Whiteandsonsgarage
5 жыл бұрын
JDS JK definitely have the same problem with my tj
Nice little box! 😆
5/16 stainless steel self tapping screws are the best for raddling noises.
Good thing about jeeps
You can put the rock lights behind the mesh part of the inter liners
Love the video man
@JKGearandGadgets
5 жыл бұрын
Thanks 🤘
Thanks! Look good. I am buying a set.
That is my big dilemma right now with these Falcons 3.3 I’m really big on how the inners mold inside and have been looking and researching ..good video Ben 👍🏼
@JKGearandGadgets
5 жыл бұрын
i think these and the JCR inners are your best options. There are some others that fit with some trimming, but i wouldnt want to trim something that i just bought
What I did at work for someone’s was spotweld the bottom piece where the hook always comes undone
Ben: we’re getting ready to go out to eat Daughter: imma drive through this puddle with my white shoes first
@JKGearandGadgets
5 жыл бұрын
Every... single... time 🤦🏻♂️
I'll have to keep an eye out for you at Raush Creek this weekend! If all goes well I'll be there with a few friends!
@JKGearandGadgets
5 жыл бұрын
Well, it looks like I won’t be going to Rausch anymore. Maybe I’ll catch you there another time!
@traviscurtis439
5 жыл бұрын
@@JKGearandGadgets Me either actually, we are going to Bald Eagle state park now
Awesome 👏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I like a nice little box 😂😂
I think 4 people from DV8 disliked your video, hahaha
Low key bomb there at the end.😂
Might not be the long arm vid that everyone's waiting on but don't down play inner fender install either. I personally would make it a priority to get that air bump stealing, DV8 trash off my rig.
Can you do a power steering gearbox replacement video. I have been trying to find one alike to no avail. And forums are terrible.
Did they give you a coupon code for your followers by chance? Considering purchasing both the inner fenders and the hood louvre due to your videos specifically. THX! :-)
Until I get some inner fenders, I just took my factory plastic ones, trimmed them to fit my new flat fenders, and reinstalled them with the help of some zip ties :)
How are these inner flares handling? I have had something similar to those dv8 ones you had and the passenger side sheared off at one of the bends from the sway bar link bolt hitting it since the ones I have are not very well tucked in. Thinking about Nemesis off-road that are similar to those that you installed. Because I have the Teraflex Falcon shocks though it recommends taking the shocks off because of the reservoir.
Awesome video mate, they look awesome, wonder if they do some they would fit my tj?
@JKGearandGadgets
5 жыл бұрын
They do make a TJ version, but they look different
@Whiteandsonsgarage
5 жыл бұрын
JK Gear and Gadgets interesting, how different is it? Thanks
@hylineoffroad3131
5 жыл бұрын
Cheap Jeeper Sorry, we only make them for the JK’s.
@JKGearandGadgets
5 жыл бұрын
Hyline Offroad sorry! I could have sworn I’ve seen a Tj inner fender from you before.
@JKGearandGadgets
5 жыл бұрын
Yep I’m wrong 😂. Just went and looked
Planning on selling the old DV8 ones? i don't mind a bit of rattling and trimming my stock ones didn't go so well.
Hey what do you guys think about running inner fenders raw. No paint. Is it too much work to maintain and they'll look like crap after a short period? thx
🤙
What are your plans for the old DV8
This is the first video with your new turn signals, where did you get them?!?! I’ve never seen them!
@JKGearandGadgets
Жыл бұрын
They are the jw speaker trail 6 lights
@3:05 ...that’s what he said
North Carolina please I’m 4 hours away 😂
Those look great. Are going to do rear inners too?
Def picking these up next. Are rear liners even necessary?
@JKGearandGadgets
4 жыл бұрын
Nah
@HumanBean520
4 жыл бұрын
JK Gear and Gadgets roger that
are you from PA ? I am about an hour drive from RC
Did you use existing holes for bolts that go in to nutserts or did you have to drill? .. on min 8:00
@JKGearandGadgets
4 жыл бұрын
Existing holes
Are those the mce fenders or did you change them up?
Have to ask.... I have purchased the same inner fender liners and Metalcloak Overland front and rear fender flares. Do you know if these will work together ?? Not a lot of information on this. Thanks !! From Spring Hill Tennessee
@JKGearandGadgets
3 жыл бұрын
I don’t see why they wouldn’t!
Ive been watching all your you tube vids on 1 ton axle swap. Out of curiosity what engine mods have you done to your jk?
@JKGearandGadgets
5 жыл бұрын
None really.
@barryprice8699
5 жыл бұрын
@@JKGearandGadgets i was just curious how the power was rolling them 1 tons and tires. Im planning on a hemi swap next year and was just curious as to wether rhis swap would work with my swap
@JKGearandGadgets
5 жыл бұрын
you will be perfectly fine with a hemi. im running the 3.8... probably putting 100hp to the ground lol. if your going with a hemi then no need for 5.38 gears
Does it bug you sometimes not getting a complete set of something? I.E. matching front and rear inner fenders?
LS/6L80 SWAP...
What kind of fenders are those ?
I have been worried about the side vents near the intake. I’m planning on taking my Jeep through mud and water, has anyone or have you heard of water getting to the air intake?
@JKGearandGadgets
3 жыл бұрын
I’ve known plenty of people who sucked water in and destroyed the engine. Just don’t go splashing through water fast, go slow
So, are thos vision wheels for the Gladiator?
@JKGearandGadgets
5 жыл бұрын
Yep!
Product link?
Ben they work with falcon shocks 3.3?
@JKGearandGadgets
5 жыл бұрын
Yep! Just have to install the inner fender first, then the shock.
@canalesivany
5 жыл бұрын
Thank you sir!
Can I buy your old ones from you???
How good are the shocks you have now?
@JKGearandGadgets
5 жыл бұрын
They are decent. Honestly I would look at something different though. They are good for Offroad since they do have a good amount of travel, but the ride isn’t the best
Peffferated! Hahaha made me laugh!
Hey what camera are you using?
@JKGearandGadgets
5 жыл бұрын
amzn.to/31RKxXi Gopro7 Black, It is amazing, i shoot in 2.7k 60FPS with hypersmooth stabilization. It has the option for 4K, but it takes longer to edit the videos. 2.7k is easy to edit and still is extremely high quality. This is by far the best GoPro ever made. The only issue is battery’s overheating. So I bought a 3 pack on amazon (knock off brand), and change them out about every 30 minutes of filming to prevent overheat on hot days. Would highly recommend it as a camera for filming videos and Offroad action.
Can I buy the dv8 ones off of you?
@JKGearandGadgets
5 жыл бұрын
Shoot me a message on IG
Can I have one of those license plates pleaseeee?
@JKGearandGadgets
5 жыл бұрын
Shoot me a message on Instagram
So after having these a while do they rattle at all?
@JKGearandGadgets
2 жыл бұрын
Mine haven’t rattled at all
@chrisprice279
2 жыл бұрын
@@JKGearandGadgets great! I plan on buying a set soon!
Wanna help a jeeper our and send me the old ones?😎💪🏽
I’m here to serve some poopoo
@JKGearandGadgets
5 жыл бұрын
Wat..
What kind of fender flares do you have?
@JKGearandGadgets
3 жыл бұрын
MCE
@crossroadsoff-road7136
3 жыл бұрын
JK Gear and Gadgets do they have different widths? Yours looks slimmer then the ones I seen
Do those come in pairs or is that price each ?
@JKGearandGadgets
3 жыл бұрын
Pair
@ddunerider
3 жыл бұрын
@@JKGearandGadgets thank you for your quick response sir...love your builds
Are these the black powdered coated ones?
@JKGearandGadgets
5 жыл бұрын
Yes!
@jrsproductions3
5 жыл бұрын
JK Gear and Gadgets ok thank you! I am trying to decide between these and the dv8
@JKGearandGadgets
5 жыл бұрын
JRS Productions the Dv8s suck; that’s what I just pulled off
@jrsproductions3
5 жыл бұрын
Just don’t know if I can do that amount.
Ace inner. One piece. Less hardware to come lose
Pefrated? Perforated lol just being a word nazi great video Ben!
Your hand is annoying me 😂
@JKGearandGadgets
5 жыл бұрын
👋
What kind of fenders are those ??
@JKGearandGadgets
3 жыл бұрын
MCE narrows