Part 1 - Metalcloak Front Overline Fender Install 2015 Jeep Wrangler JK
Автокөліктер мен көлік құралдары
🔔 Please CLICK THE BELL if you want to see my videos! 🔔
This is Part One. Front Overline Tube Fender Install.
I'm installing Metalcloak Overline Tube Fenders on my 2015 Jeep JK Unlimited Wrangler. I am also installing the standard overline flares, Metalcloak inner fender liners, the rear overline fenders with exoskin, and the rear corner skins with LED tail lights.
www.metalcloak.com/Jeep-Wrang...
The JK Wrangler Overline™ Tube Fender gains the most tire clearance in the industry. Period. Fit 37's on Stock JK with No Lift!
Redefines the lines of the JK
Rock-Biting Reinforcement for Lay-on-the-Rocks strength
Easy to Install
www.metalcloak.com/Jeep-Wrangl...
Metalcloak's JK Wrangler Standard Edition Overline Front Flares are the most popular option - providing 8" (1" wider than stock) of easily removable coverage for you JK. Metalcloak Overlines are the original and only Steel Removable Fender allowing you to run 37's on a stock JK.
Ball Lock Joints secure each end of the Flare for incredible strength while providing the best Turning Clearance, best Object Deflection Angle and best Tire Clearance in the industry.
www.metalcloak.com/Jeep-Rear-F...
The JK Wrangler Standard Rear Flare is our mid width flare offering 6' of tire coverage. This is the only Quick Release Jeep Rear Flare in the industry.
Dovetailed for the best Object Deflection Angle, the Ball Lock Joints secure Flares for incredible strength and tub protection with just the right amount of clearance and coverage.
www.metalcloak.com/Jeep-Rear-F...
The JK Wrangler 4 Door Rear Flare Mounting ExoSkins provide additional strength to the vulnerable rear wheel well opening.
Designed specifically as a mounting system for Quick Release rear flares, the flare mounting hardware is built right in.
www.metalcloak.com/JK-ExoCorn...
The JK Wrangler ExoCorner LED Kit provides additional strength and rock-biting protection to the vulnerable corner of your 2-door or 4-door JK without the extensive body mods required with other corner guards.
Designed as a kit to work with the MetalCloak ExoSkins and Rear Stock Corner Plates, the parts can also be purchased individually.
Пікірлер: 28
It’s so refreshing to see a real Jeep guy do one of these videos. So many gals tape everything off and paint match everything. You def have been around the block clocked and it’s awesome. Great job with all the videos for this project!
Always love your attention to detail. Nice work!
Looks good!
Another great install with some good tips. Love MetalCloak products, the fenders and liners are my next order to MC. Still waiting for some decent weather here in Ontario, Canada to put on my MC bumpers, tire carrier and finish my MC suspension with the control arms.
Autoedit does good work 😉
@o3djeeps
6 жыл бұрын
I need a frisbee dog...
How are ya likin' them fenders? I think they're the best looking ones out there.
@o3djeeps
6 жыл бұрын
WALTERRIFIC so far.. love them. I agree... They are the best looking fender for the JK!
In a pinch, spray paint the end of a Q-tip and touch up with that.
Make sure you show inner fender fitment on video. I also have the same snorkel setup. I want to See how you did your before I buy same inners. Thank bud, keep up the great vids.
@o3djeeps
6 жыл бұрын
That second video is up... wanted to make sure you saw it. There are a lot of options on that... I was considering maybe in the future doing more....but the simple cuts got me installed.
@Reddiggler
6 жыл бұрын
o3djeeps [ OVERCLOCK3D Jeeps ] what happen to the Jeep emblem inners you had?
@o3djeeps
6 жыл бұрын
Oh... I ended up selling those and went with these metalcloaks that were designed to fit the fenders. You can probably make the exact same modification I did to get those Auxmarts to fit around the snorkel. I just decided it wasn't worth cutting them up if I was going to switch them out.... Sorry about that. It was a last minute decision to change directions.
Hey CPO, so why change flares twice? Do you end up with a lot of extra holes? For me it would be cost. Love the metal cloak products.
I don't get it. MC has flares for the JK not fenders. The other Wranglers (TJ/YJ), MCs has front fenders with integral flares and just flares for the rear. JKs don't get their front fenders replaced with another format of a fender.
@o3djeeps
6 жыл бұрын
Michael Moran interesting... I never really thought about it before... But it kinda makes sense. The JK fender is much more integrated in the JK... So even just changing the thickness of the metal would mess up all kinds of stuff. Probably no point making new fenders if they have to be the same tin can thickness!
I like the fenders... I always like your videos because you provide good tips. What are you doing with your old fenders? If you don't need them I take them off your hands ($$) of course. :) holler at me.
@o3djeeps
6 жыл бұрын
They are in the garage... and now for sale!
@ChillWeezy
6 жыл бұрын
PM'ing you!!!! :)
Did you use a grinder to cut the fender support bracket? I have a dremel oscillating tool and not sure if that would cut it.
How heavy are they? Steel or aluminum
Ok... 11:15, what is that?
@SWBCrawler
6 жыл бұрын
Ok. Later in the video. You say it's just a clamp. Thought it was some sort of drill stabilizer.
@o3djeeps
6 жыл бұрын
SWBCrawler yeah it's kind of funny the angle of the camera makes it looks like it's somewhat associated with the drill but it's just a clamp next to the drill. It's a cheap $3 Harbor Freight clamp. Love those things!
@SWBCrawler
6 жыл бұрын
Looking awesome. Great video. And I'm still jealous.
@o3djeeps
6 жыл бұрын
SWBCrawler did you notice I added a few elements form that discussion we we're having on Facebook?
@SWBCrawler
6 жыл бұрын
o3djeeps [ OVERCLOCK3D Jeeps ] haven't seen it.. guess I have to go over there now. ;)
Its a jeep..rust comes along for the ride.... Lol