Excellent Job! This is a great video with plenty of dealer spec information.
@nznkmc8 ай бұрын
Perfect work. Thanks for manual screenshots...
@sadiqrehman9472 ай бұрын
Great video I’m actually doing the same job was putting the supercharger back and on the drivers slide at the back of supercharger I connected the coolant pipe and the electrical sensor but on the passenger side I can’t seem to find or remember what plugs in to the port at the back
@krisjarosz331618 күн бұрын
Great video, thank you! Do I need to take off the whole supercharger just to change the coupler ? Or will I be able to remove the snout without removing the supercharger? Thanks
@Chewie374Ай бұрын
What is the plug behind the driver super chager? I pulled it up without some how unplug it. I can't do it? 2017 range rover 3.0 sport
@user-xu1jw5jq7t3 ай бұрын
Very good thanks from germany :-)
@xuehaotan92923 күн бұрын
Nice video here, very helpful for my jaguar work. Just wondering what marker you are using on the bolts (green one) and why you are using them
@E39M5SPEED
2 күн бұрын
@@xuehaotan9292 paint marker from Amazon. Once bolt is torque to spec it always gets a Green mark to make sure . On connectors they all get green marks also to make sure nothing is missed upon re-assembly.
@amonm6594Ай бұрын
How much oil drained out of the supercharger?
@manuelmuniz41903 ай бұрын
Hi, thanks for the vid. Could you tell me the torque for all the screws? Thanks in advance.
@ChicaI-bi4gmАй бұрын
How much oil did you put in the supercharger?
@amonm6594Ай бұрын
How did you pull apart the Snout from the supercharger the glue they use is too strong I am trying to do it now impossible
@E39M5SPEED
Ай бұрын
Vice and rubber Mallet.
@JohnnyjayV3 ай бұрын
Where could one obtain the repair manual for a 2017 Jaguar xe?
@E39M5SPEED
3 ай бұрын
I used all data.
@SimonNg-dj3qiАй бұрын
Subscribed!! One of the best videos on youtube! From camera angle to explanation to every details... couldn;t be better.. Thank you so much... Also, would you happen to know what is causing this noise on my RRS V8 Supercharged kzread.infopFXDfNHlTG8
Пікірлер: 20
Excellent Job! This is a great video with plenty of dealer spec information.
Perfect work. Thanks for manual screenshots...
Great video I’m actually doing the same job was putting the supercharger back and on the drivers slide at the back of supercharger I connected the coolant pipe and the electrical sensor but on the passenger side I can’t seem to find or remember what plugs in to the port at the back
Great video, thank you! Do I need to take off the whole supercharger just to change the coupler ? Or will I be able to remove the snout without removing the supercharger? Thanks
What is the plug behind the driver super chager? I pulled it up without some how unplug it. I can't do it? 2017 range rover 3.0 sport
Very good thanks from germany :-)
Nice video here, very helpful for my jaguar work. Just wondering what marker you are using on the bolts (green one) and why you are using them
@E39M5SPEED
2 күн бұрын
@@xuehaotan9292 paint marker from Amazon. Once bolt is torque to spec it always gets a Green mark to make sure . On connectors they all get green marks also to make sure nothing is missed upon re-assembly.
How much oil drained out of the supercharger?
Hi, thanks for the vid. Could you tell me the torque for all the screws? Thanks in advance.
How much oil did you put in the supercharger?
How did you pull apart the Snout from the supercharger the glue they use is too strong I am trying to do it now impossible
@E39M5SPEED
Ай бұрын
Vice and rubber Mallet.
Where could one obtain the repair manual for a 2017 Jaguar xe?
@E39M5SPEED
3 ай бұрын
I used all data.
Subscribed!! One of the best videos on youtube! From camera angle to explanation to every details... couldn;t be better.. Thank you so much... Also, would you happen to know what is causing this noise on my RRS V8 Supercharged kzread.infopFXDfNHlTG8
@E39M5SPEED
Ай бұрын
One of the pullys. Or tensioner.
@SimonNg-dj3qi
Ай бұрын
@@E39M5SPEED Thanks again! much appreciated.
Estimated dealer cost?
@E39M5SPEED
Ай бұрын
Takes me 2 days - 16 hours. I’m at $45 per hour.