Removes cheap plastic trunk latch cover "Now it's a Toyota, not a Lexus." Truth 1000000%

Love the Big Lez show reference!

@Thesomersetgimp

3 жыл бұрын

And if Nolan has done the fix *long inhale “thing’ll never be better”

Back the mic up a bit Benny..... all that heavy breathing got me slightly aroused. lol.

@yaleman

5 жыл бұрын

Darth benny :D

@alexcorona

5 жыл бұрын

firecrakka The mic is the correct distance, he just needs a filter on it.

@wjanes11

5 жыл бұрын

Yes. Please breathe through your nose or don't wear a mic. I couldn't finish the video and really wanted to watch the whole thing. I like you Benny but please fix the mouth breathing thing.

We bought all the AU Falcons

This is every Irish lads dream vid, right before Donegal rally aswell😂

@matthewrogan9349

5 жыл бұрын

it just needs a set of cuts and a big window sticker and it's ready for king of the cone 😂

@MegaSparkyScraper

3 жыл бұрын

Something that says Ejaculate and evacuate

'I do love a quality restoration; I'll let you know when we do one!' PMSL @ ya Benny!

"I'm not really into aesthetics" *swaps headlights because he doesn't like the "look"*

@agga3955

5 жыл бұрын

Wahhhh

@kefinkatt

5 жыл бұрын

And brake lights

@MaximusPsychosis

5 жыл бұрын

"Give it that au falcon look"

@Matty.Hill_87

5 жыл бұрын

The Lexus lights did suck though 🤣

@RyTrapp0

5 жыл бұрын

Don't blame him - some things are just unacceptable

20/10 for the trash talk, good stuff boys. Keen to see this thing sling sideways into Cheryl

Yeah, nah, nah, nah, mate. Mike Nolan woulda done that neon install for a cashie while doing 480km/h over the Mooney Mooney bridge in his Patrol fair dinkum.

Anyone agree there is never a boring video to found on this channel? thank you!.

Next car def needs to be a au falcon

I have an Altezza over here in NZ. It's really cool to see someone finally doing something with the is/altezza platform!

Cost of manual ls200's has just gone up

@Channel_60

5 жыл бұрын

Easy enough to get a nan driven auto and swap it.

This is literally my favourite channel. Love this bloke

good to see another quality aussie youtuber. Keep up the good work!!

This episode feels like a real world Benny! Really enjoying your insight, dry wit and stickers over potential sponsors. Keep up the great work.

Love the new project. Looking forward to seeing it come together.

Ok Beeny this is a great vid so far! I really like how you are actually showing how to, aswell as being very descriptive! Keep it hoss

Loving the videos Benny, keep it up!

Stoked to watch this series Benny. Also awesome intro!

Great start to the series, loving the music, and yeah, I've done a similar injury with a flat blade screwdriver, feeling your pain 👍🏼👍🏼👍🏼👍🏼

This is one of my favorite all time cars. Im stoked as to see what you do with this benny!!! #DOPE and in stealth blaaaaaaack!!! #SUPERDOPE

I want to say thank you Benny. These little "tricks" of the trade and shop knowledge tidbits are truly valuable pieces of knowledge. It's not stuff you learn in a book. You only learn this stuff working in the shop and running into problems you need a creative solution for. And it's priceless knowledge once you know it. The little things like showing us how to hold up the Transmission when you pull the engine, with a ratcheting jack supported on the front member. And pull off the old oil filter with the new filters box so you can keep your hands clean. It's such great knowledge to have and I want to thank you for sharing it.

Awesome i’m going to like this build series 👍 thank you Benny

Yesss! The bumper walk returns

Looking forward to the rest of this series for sure

Yeah Benny, Old School MCM style...Grab that front bar!

I am loving your new channel Benny, such great and detailed content. The MCM gang are taking over the interballs!

Learned to drive in one of these, had one in the family for 12 years (from new) too - genuinely great cars.

11:07 "If Mike Nolan was a panel beater, he would'a put this tail light bucket in." Hahahaha best thing I've heard in ages.

Love Benny’s one liners!

NO WAY man, you've got a channel. AWESOME. Subscribed. Keep up the content!

I used to have one like this. Pearl white paint, sand brown leather interior. First love of my life. :)

Love the video Benny, I feel your pain on the flat-blade mishaps, done it myself lots of times, even when I know its about to happen anyway. Keep up the great work :)

Back on point Benny, good ep. I enjoyed it and your humour.

love the build already, keep it up man

Best episode yet Benny!

Oh no, it's DIY body work! Brace yourselves, "Comments" from the "Pros" are coming.

Going side ways, Excited for this series!

Ahhh Benny loving the banta and big lez referencing... keep it up :)

Good stuff, looking forward to seeing what tricks of the trade are employed when registration isn't part of the end goal!

Very excited about this one

Loving the channel Benny

A tip i learned from school is for thinner metal is if you beat and smash it to much and it gets like a tin can where you can pop it in and out is take a torch and heat the metal up until starts turning a little red then hit it with water or air and it will shrink itself and tighten up. Obviously be careful with an open flame and dont use it on structure areas as it makes the metal brittle and weak by heating it up. More for when you need to be picky about the repair. Hope it helps, try it out. Thanks for the content Benny! Hope to see you soon at drag week

Good morning sir and thank you. i like your ideas about the build.

Can't wait to see more

Nice project. Used to do the same with my old cars, throwing off all the junk from previous owners and get the car clean again is a good feeling.

Got it looking good mate. I really like the new tail lights.

Actually a really good platform to work with and super cheap now, interesting to see what can be done to that 1G-FE engine, Car Throttle had a build series on one a few years back and turned out pretty damn sweet.

Great video keep coming. Thanks.

Looking forward to it, want to do the same with my is200. Already swapped in an lsd, skid pan booked for next week

Nah nollsy would have secured it with ciggy butts.

@asher666

5 жыл бұрын

Ciggy Butt Brain

@EMcL88

5 жыл бұрын

Gimme me loitahh

@shastamcnasta2802

5 жыл бұрын

Nollsy only does quality work, his track record shows he can do any job proficiently. At least, good enough for government work.. but cashinhand

@ItsMuush

5 жыл бұрын

oh yeah nah oh yeah nah oh yeah nah

That was really good. Best BCW yet.

I've always liked these cars but they're so much money in canada, specially for a manual. This makes me want to look for one again. Cant wait to see more!

@wotever99ninynine

5 жыл бұрын

i got mine for $2800 in nz. needed a car, wasnt quite what i wanted but as i said. i needed a car to get to and from work. the old levin was dying on me. got it with 226,000 kms. now has 270,000 a few years later, had to replace a few ignition coils. the tyres, rear pads, and some bulbs. thats it. nice reliable car. really wanted the rs200 4 cylinder version with the 3sge 2.0L 210hp 6 speed manual, limited slip diff etc.. but i got the as200 6 cylinder with the 1gfe 2.0L 160hp 4 speed auto, OPEN diff... oh well, still fun and slippery in the wet. and a really nice daily driver. and a damn beautiful car. that open diff is a pain though. i hate only spinning one wheel. you have to really throw the thing to get it properly sideways and spinning both wheels, especially given its a damn automatic. oh well. as i said, fun in the wet. and as a bonus if you can only get it sideways in the wet. your tyres last ALOT longer.. pretty sure if this guy is serious about making this just a fun drift car etc. he will weld the diff. it would be super fun and slippery then :-)

IMO "this" is the better Benny, nothing wrong with previous videos on the channel, just seems more you.

@andersjjensen

5 жыл бұрын

It was the same with The Skid Factory. At first they seemed a bit stiff and timid in front of the camera, but they started loosening up fairly quickly. Guess Benny is just following the natural learning curve of being a good presenter.

love bits at the end of the video

I love bennys banter.

Great episode I enjoyed it keep it up 👍

Mad. Always thought about modding one of these

Enjoyable episode Benny

Keen for the diff welding episode

Wicked I've got some very similar damage to straighten out! Didn't even think of the tie down mounts!!!!!

I can smell a 1j or 2j coming soon! Looking forward to seeing it Benny.

@therealboofighter

5 жыл бұрын

Drift In Japan if he was cool it would have a beams.

I’ve been waiting for this :)

Best vid yet

I had to do the same when my EF falcon got rear ended. But I used a seat belt and bolted it down. Then attached em to a mother cars tow bar the drove my ef forward. Mine was a lot worse than the is200 but came out pretty sweet. Ended up loving the ef for a few more years before it was torn down and stripped.

The "Mike Nolan" reference wasn't lost "Fiddy bucks mate, cash"

Do love a quailty refurbishment can't wait till we do one 😂 🤣 had me 😂

Looks like fun Benny😉😊👍👍

I remember the Toyota Altezza from Gran Turismo 2. I wanted a IS300 because of them for so long.

What the hell Benny! I didn’t know you had a channel? Should mention that when your in MCM. Subscribed now.

Hahaha yes!!! Love the name Benny. Gone to new level of awesome

What a nice surprise, can't wait for an update. Looks like you have the Sport version with torsen LSD. Good choice, but for drifting people rather used welded open -diff. Try it with torsen and you'll see. Btw. if you are planning on keeping it stock for a while long, maybe you should visit Rank One Performance page, where you can get eg lightweight flywheel or supercharger kit.

You could always build some steel bash bars later on aswell.

Yay new video!

good vid Benny

Never know you may be a natural drifter lols Benny

That tail lights make it look like a BA-BF rear end now Benny...close enough to the AU. 👍

Love hammering a bit of beaver

I think a lot of young people who want to get into drifting need to watch this series on the IS200 to show them that it's not about spending $100 000 on a car. At the learning stage it's about seat time and having some fun.

@andersjjensen

5 жыл бұрын

Exactly. Get a rear wheel drive car that is so cheap that you don't worry about thrashing the tits off it. Make all the beginner mistakes that everyone go through. Have it ceremoniously crushed while drinking beer once it is beyond salvage.... THEN it makes sense to start building something "proper".

@rarkitorparkit

5 жыл бұрын

Wise words there. A good driver in a crap car will almost always beat a crap driver in a good car. Slow, crappy cars make you a better driver in the beginning and less tears are shed when you inevitably lunch it and get intimate with the barrier.

More hits than? I love the name Elvis regardless! Benny, I once put a 12 gauge self drilling screw through my hand, that sucked! I had to tell the doctor lefty loose righty tightly so she could get it out! I love your shit, keep it up!

Had the 3 liter (2JZ-GE) version of one of these here in the US. Fantastic looking cars, but pretty underwhelming stock. Nice thing is there is ton's of aftermarket support for them. Definitely looking forward to this build.

@MafiaboysWorld

5 жыл бұрын

We got the IS300 aswell a few years after. 👍 Trust me, if you think the 300 is underwhelming, the 200 will make you think a Miata is fast. 🤦

Cool beater Benny

Finally someone else that has the same box opening method as I do. Use whatever is near you to cut the tape.

@B8zey155

5 жыл бұрын

Keys, a pencil, spanner, anything really 😂😂

@rarkitorparkit

5 жыл бұрын

What about a fuel injector?

If you use the emergency scissor jack in the boot and a few lengths of timber you can push that back panel out really easily. Use timber across the spare wheel well and jack from there..... Don't ask how I know this lol

You got me on this one benny :)

the internet needs more of this - Mechanical Stig FTW

19:12 Sounds like Marty laughing. Hahaha.

Changes address to buy cars lol I love it!

from a panel beater; use a bigger hammer and hold a block of wood on what you want to hit to spread the force out and not cause huge damage.

@rarkitorparkit

5 жыл бұрын

On ya. Sledgie with the handle cut down works mint for that chit.

Less hot boi!!! And more drifter! Thumbs up

Thanks Benny :)

How many lebos owed that car from western Sydney. They love is200

@MafiaboysWorld

5 жыл бұрын

Just vacuum the interior and you'll find out from the amount of back hair you'll get out of the car. 👍

Keen on this build

Looking forward to skids at the skidpan again Benny, I’ll bring my crusty RT142

Do love a bit of plug and play, we'll let you know when that happens... hahaha

I like where this is going Benny. Im in the same boat as you but i got a bit more work to do, mine is fagamatic. Im planning engine swapping it with a 1jzgte vvti and cd009 gearbox

nosey reference was on point

Haha! Did not expect that Big Lez reference.

I'm not sure I'd called it a "Masterpiece", but it sure is a piece! ;-)