Is this the greatest screwdriver of all time?
Тәжірибелік нұсқаулар және стиль
Screwdrivers and wrenches are now for sale at www.handtoolrescue.com
The finest in antique screwdrivery, this screwdriver is based on an 1904 patent by William Ward, but with several modern improvements. You can view the original patent here: patents.google.com/patent/USD...
Each screwdriver is made from 1144 steel, ~9in/22.8cm long, and weighs 0.44lb/200g. The square shaft is 3/8in/0.95cm thick. The blade is 0.5in/1.27cm wide and 1/8in/0.3cm thick. Blade is hardened to 52 HRC.
The blade on the screwdriver is now a consistent width, unlike the tapered design of most modern screwdrivers, to assist in removal of countersunk screws. The blade tip also has a hollow-ground design ensuring 1/10in/2.5mm of the tip is parallel, allowing for maximum engagement with the fastener. The handle has been re-positioned so that it is perpendicular with the blade to allow for increased strength when using the screwdriver for prying. The handle has also been designed to encapsulate the handle scales, so that even without brass pins, the scales will stay in place. The square shaft allows you to use wrenches to increase the amount of torque you can apply to the fastener if they are really stuck!
This was a major design and production undertaking that took about 2 years of prototyping to finalize. I excited to share this with everyone!
Big thank you to @yxecnc as well!
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
Podcast (with Jimmy DiResta and Andrew Alexander) - anchor.fm/fitzall
Пікірлер: 816
I've giving one of these away on my Facebook page for some reason! Giveaway ends on November 11, 2021. Follow the page for details: facebook.com/handtoolrescue/
@xerxespamplemousse6622
2 жыл бұрын
Isn't that "MetaBook" now? In order to dissuade the torch- and pitchfork-wielding mobs?
@thewasatch208
2 жыл бұрын
Yes please!
@keldon_champion
2 жыл бұрын
That is a very handsome screwdriver but I'm a little too practical to spend that kind of cash on something I will without a doubt beat the shit out of, seriously I used one of my screw drivers as a chisel the other day to get baked on grease off the back of a deep fryer the other day because it was so thick on the back that I couldn't even find the screws holding the panel on.
@UncleTogie
2 жыл бұрын
Do they come with a warranty?
@epicmotorcyclerides2812
2 жыл бұрын
I f’ing want one, they look f’ing awesome. I could insert that shaft into holes all day…….
It is balananced so you can use it as a throwing screwdriver to defend the shop. The shape of the blade is ideal to ensure exsanguination and the handle for blunt force trauma. The finish resist fingerprints so you can blame the apprentice.
@anastasiacelestine3571
2 жыл бұрын
🤣🤣🤣 The thoughts that were triggered watching this. I was surprised reading the comments.
@metalbob3335
2 жыл бұрын
Sanguine how lovely .
@dyadica7151
2 жыл бұрын
@@anastasiacelestine3571 Hand Tool Ninja
@4sl648
2 жыл бұрын
@John Verne the word of the day!
@ellieprice363
2 жыл бұрын
@John Verne Will it change your oil and filter? (:-)).
I'm still laughing.. this is the PERFECT example of how products should be advertised!! Now I have to max out my credit card to buy everything Eric sells!!!
@aland7236
2 жыл бұрын
If you have the video game GTA 5 watch one of the TVs in the game (Yeah, I know) wait for the commercials to begin.
@thetruthexperiment
2 жыл бұрын
You are absolutely correct. I want one so badly for both of the best reasons. It looks good, it’s well made and the advertisement didn’t pretend to be anything else and it didn’t take itself seriously and was actually very funny
While the video was in "jest", I have both the screwdriver and the adjustable wrench. There are no finer tools on the planet. Yes, I've used the screwdriver as a hammer and it works well in that application. Yes, I've used the screwdriver as a lever and it's strong enough to handle everything I've thrown at it! The adjustable wrench is impressive. Not only is it metric and ASE, it's also left or right handed.
@RBCire
2 жыл бұрын
Have you used the wrench as a hammer or lever?
@Ken-um9bu
2 жыл бұрын
@@everettstormy Yes, the screwdriver width remained constant during surgery. I did find that it works best on flat head screws, but with the correct angle of the dangle, it'll work on Phillips screws as well. I think it's the only screw driver you'll ever need! However, when applied to the tiny screws in eyeglasses, use the hammer end to force the screw.
@Ken-um9bu
2 жыл бұрын
@@RBCire I tried to use it as a weapon during my last hold up of a convenience store, but the clerk noticed that I had left the safety lock on and just laughed at me. So, I used it as a hammer to bang on the counter in my frustration. Even with that abuse, it didn't go off! Highly recommended!
@pineapplesideways3820
2 жыл бұрын
Do you loosen the wrench so it has that slop on the nut so it slips and hurt your knuckle, like a proper shifter designed to do
@66hobgoblin81
2 жыл бұрын
@ Ken. Does your screwdriver have the length (ie. 9.1/8" ) stamped in a triangle on the blade face? Mine does but the brand name is indecipherable, what brand is yours?
"so it can be recycled" I died from this
@AiMR
2 жыл бұрын
He dumps the bag of metal shavings in the recycling bin, after that it is not his problem 🤷♂️🤦♂️🙆♂️
@bloopbloop5663
2 жыл бұрын
@@AiMR fun fact only 10% of what we sent to recycling centers actuly has been recycled
@sanara_on_tour
2 жыл бұрын
@@bloopbloop5663 maybe in the USA, not here in Germany 😏
@AlbionSupreme
2 жыл бұрын
@@sanara_on_tour Disgusting fact most recycling is done by hand sorting garbage.
@sanara_on_tour
2 жыл бұрын
@@AlbionSupreme I know it little bit different: with lasers and compressed air... you still got some people in there, but they mostly for checking the machines
I need them allllll!
@pauldery7875
2 жыл бұрын
Me too
@Wuzzup129
2 жыл бұрын
WE ALL DO!!!
@SrgRamrod
2 жыл бұрын
Both surprised and not surprised to see you guys watching these videos
@thewasatch208
2 жыл бұрын
I'll take one... If you're buying
@mountopia77
2 жыл бұрын
400$ 😮
That the bulge at the end of the shaft doesn't damage the hole that it goes into is brilliant.
@bradbergeron4656
2 жыл бұрын
I too was getting mildly.........tempered
@Kremit_the_Forg
2 жыл бұрын
Glad I'm not the only one questioning my sexuality after that. So.. is it toolophilia? Or are we toolsexual?
I forgot to add, the screwdriver is designed for both clockwise and counter clockwise screws. The adjust wrench can also do the same, but you may have to turn the wrench over. Nonetheless, both tools can handle any job your throw at them. Later this evening, I'll be using them for brain surgery.
@anstef1485
2 жыл бұрын
What incredible foresight went in the design of this tool! I am astounded.
@tbuc2920
Жыл бұрын
Will you operate on my mother-in-law. Her brain needs some attention.
Wow! That would be perfect for removing paint can lids, scraping sale stickers, and cleaning my finger nails! Thanx Hand Tool Rescue! :D
I feel rather naughty having watched and heard this incredibly informative and descriptive narration on how The Best Screwdriver In The World is made.
Do you offer a metric version. I only have a metric adjustable wrench / spanner in the UK.
@Bbeaucha88
2 жыл бұрын
I got lucky because I bought a metric adjustable wrench that identifies as an imperial adjustable wrench. Meant I had to by another metric one though but you win some your lose some.
@absolutechaos13
2 жыл бұрын
Just use a 10mm. Its pretty close, or so I have heard. Can never seem to find mine. Pro tip get one of the US adjustable wrenches, they are inch on one side and metric on the other.
@Drew-Dastardly
2 жыл бұрын
13mm is the same as a 1/2" anyway, who cares? Also 3/8" does the job for a 10mm. Might need to hammer it on but it werks.
@donparker1823
2 жыл бұрын
We got our imperial system from you guys. It's so good. We went to the moon with the imperial system. Pity you guys gave up on it. Thankfully we never used the Wentworth system.
@tomf3150
2 жыл бұрын
@@donparker1823 Oh really ?
This video is one of the reasons why I LOVE this channel! 😍
This pleases my jimmies, glad you're making them like they used to (relatively), glorious.
You, sir, are the Godfather of YT restorations and fabrication!
Talking about all of these shafts and tips and hardness makes me feel funny.
@Hixaren2
2 жыл бұрын
Don't forget about the wood
@notfeedynotlazy
2 жыл бұрын
@@Hixaren2 Cherry wood
@ajk9463
2 жыл бұрын
As long as that funny feeling doesn't last longer than 4 hours you should be alright
@eileencollins8799
2 жыл бұрын
Filthy beast! 😂😂
@anastasiacelestine3571
2 жыл бұрын
Yours are the disgusting hands they wax against, sir.
Been watching you build these things for years.. just ordered one! Thanks, Eric. I've always been looking for a screwdriver I can beat the hell out of... and this is the one! 🔨⚒🗡
Just got my order a few weeks ago.... it's by far the best screwdriver I own now.
Amazing! So many features in one tool. What the video failed to mention is how it can be used to fearlessly pierce and rip the strongest packing tape, bot plastic and old-fashioned paper. Who needs a dedicated box cutter when you have one of these bad boys?
This is seriously magnificent, I want one right now!
I am almost positive that if I spent that much on a screwdriver my wife would leave me... On the other hand, with a screwdriver like that I would likely be so irresistible I would be remarried in no time. Life's full of tough choices.
@HandToolRescue
2 жыл бұрын
The Ol' catch 23.
@quixototalis
2 жыл бұрын
But won't she get half the screwdriver in the divorce? You need two of them!
@robblincoln2152
2 жыл бұрын
Does the wife really need to know? REALLY? It will just between us, KZread, your bank account and the neighbors cat. No harm there!
@DBKING04020
2 жыл бұрын
Life’s full of tough choices. This isn’t one of them.
@Bbeaucha88
2 жыл бұрын
@@quixototalis omg you are a lie saver!
Just ordered mine! I literally work in a tool factory, yet I own one of everything HTR makes. Love the channel!
Just bought one. It sounds perfect for my job. I build shipping crates all day and I use a flathead screwdriver for literally all the "wrong" reasons you mentioned 🤣 I can't wait to show it off.
That’s hilariously perfect - well done as always!!!
I've got a proper old school one of those, needs a bit of rescuing but still works very well as a daily multi-tool!
Your design changes are dead on. Changing the orientation of the handle on the tang, for prying… 👍👍👍. Outstanding !!!
I'd never would have thought that athe making of a screwdriverr would be that much entertaining until now o.O
Ah , returning to my youth . My dad had one of these ( original round shank type ) . I can see where the square shank has got to be stronger. I still have his and it is much older than my 76 years. Good job on a tried and true design . 👍
This is THE BEST ADD EVER !! Way to go you'll get me to spend money again for Christmas. Perfect gift from me to me. Seriously it the hammer and pry bar part are probably the best use for a flat screwdriver since slotted screws are the best fastener to injure oneself while using them.
Hey Project Farm didn't have this in his slot screw driver test, I question whether that small tip is going to stand up to those quality screws that come in "assembly required" furniture from Canadian Tire. That said, AvE would probably dissemble it and put it back together, buggar it up saying it has no chooch. 🤣. I love all three channels.
@popefacto5945
2 жыл бұрын
AvE had a similar tool made from titanium some three years ago. kzread.info/dash/bejne/pZyi0rJ_gaTbl7g.html
@alext.7313
2 жыл бұрын
Of note, he also got one from HTR and did an assembly video series (I'm pretty sure it was 2 videos.)
@Matt-my7pz
2 жыл бұрын
Lol yeah it wasn't exactly a smooth one handed assembly 🤣
Just in time for Christmas. Genius!
Just received mine today and it looks fantastic
Got the screwdriver and adjustable wrench and love both.
This has to be the most seductive and funny screwdriver advert I've ever seen.............I loved every second. Time to buy new screwdrivers 😂
Received the screwdriver and wrench. They are awesome!
I have two small, old, screwdrivers that are very similar to this in design. They're my favorites. Might have to get some of these to keep them company.
Amazing! Beautiful work!
Incredible product! Would love to own one some day! Congratulations. 😊
That was awesome! Thanks
That was hilarious! The most accurate analogy on how we use the screwdriver!
i want one. Thats the tool i need to fix all the things i screwed up
Best ad ever on youtube. Very brilliant
I have the screwdriver and all 3 wrenches. They all are first rate tools and I love using them!
Ordinarily I get annoyed when a commercial announcer calls me a savage but coming from you it almost seems like a compliment.
Wow that's incredible 👍 thanks for sharing
Like one of those truthful ads. Made me smile. Great job on the screwdriver.
I think this is the first time I watch a commercial and instantly KNOW I have to own the product. I hope you can ship to Norway before Christmas 🎅
love your narration!
This is the most tsundere screwdriver ad ever... Love it!
this was the best commercial it was funny thanks for sending my fitzle its got clamping force and my buddy knew your channel when he saw htr mint
Liked it so much bought one of each!
Beautiful! Almost identical to the early 1900s ones I inheritted from my grandfather, down to the square shaft that can be grasped by unnecessarily prominent adjustable wrenches!
Nice now we have the greatest screwdrivers ever made. Thanks 😊🙏
Fantastic screwdriver!
I wasn't sure what to expect from this video when it popped up, but I can definitely say that I am not disappointed! 15/10
Looks incredible
AWESOME Screwdriver !!!! and great video
Bro my therapist will be hearing about those innuendos, thanks.
Nice video showing all the feathers. Also fun voiceover.
You got to love the sales pitch👍
I bought a mini wrench for my daughter, she loves it! Great vids and tools.
Had to watch this twice. Hilarious 😂 thanks 😊
So nicely made
I use mine as a pry tool bloody works a treat
Finally, the perfect gift for Mark Novack
I love the narration! My daughter was laughing she hard I had to kick her out of the room so I could hear it. And, the tools are fantastic!
I have a bunch of vintage ones. One of them I just got that is around a foot long. Its a nice one that needs a new handle put on. My other ones I use all the time!
I love mine! This almost made me get another.
And it comes in two sizes! You have more than doubled your catalogue. Congratulation.
Very cool trend, nicely done.
I always try to grab up drivers like that when I find them for a good price. If nothing else, the lines are just gorgeous and you can't but want to screw things when you have one in hand!
My life has now come full circle,Thx
I wish I had a need for the screwdriver. Or any of your tools. They look great.
Ordering mine soon! I work in the wind industry and the big one has come in handy too many times to not have the smaller one! now if only you can make an even more small one!
Love the flat for hammering.
Finally! I'll be ordering one soon.
So futuristic, so heavy, so impractical. I must have one! Of each size!
This video is a great example of why I follow you 😭😭👌🏼✌🏼
I own an original one of these(design wise) and I absolutely love that thing.
I now have a "favorite commercial for a screwdriver".
Perfect, I will take a full set in Torx.
"The handle when finished is a perfect fit for your hand" = "I snuck into your house last night and measured your palm while you were sleeping." I'm okay with this.
Cool that this is made again
Gotta get me one of those!!!
Your machining expertise pales in comparison to your marketing talents.. Loved it
I have a complete set from my grandfather! They are the best
Wow im just so honored to see a video of the world greatest screwdriver. You should give one away... to me.
We need more advertising like this. I might actually watch TV again for them.
Hands down, best advertisement evahh! 🤣 I'm sold 👍😁👍
Hell ye best Christmas present
That deflection on the milling of the tip... damn!
I have the large one (and all three wrenches). Unfortunately, I don't think the medium screwdriver was available at the time, so looks like I'll have to place another order :)
Brilliant!!
I like full engagement !
love the video. How well will these fit in hand plane lever caps? Seems like those slots are always bigger than normal screws.
Awesome Video 😎👍
The scent for the wax ... chef's kiss!
...lookin' good, nice job, keep safe...
I just *All Pun Intended* came from a certain website to cool down and now i had to watch this.... Thanks.
This is hilarious and I need this beautiful tool
The greatest video of all time, to go with the greatest screwdriver of all time