Just did this with my Chrysler screen. Took 45 minutes. Used double sided gorilla tape on the edge of the touch screen and my screen works brand new. Easy

@_demon1k_

Жыл бұрын

You're welcome

@LuxuryNation

Жыл бұрын

I did this before I seen ur video. But basically did it almost same way as you did. Good method

@_demon1k_

Жыл бұрын

@@LuxuryNation I didn't like the matte look of the screen and the spots in certain light that can't be removed, so I decided to change the screen for a new one after all

Is it necessary to remove the cars battery terminals before removing the radio to work on???

@_demon1k_

Жыл бұрын

To remove the radio, either remove the battery terminal or remove the radio fuse in the trunk

Did this to my 2018 ram 2500. Unfortunately for me it didn’t last to long, maybe 3 weeks or so and it started ghost touching all over again. I didn’t want to buy a new screen but it got to that point. Found the newest model (SL03) and now back to normal. You would think a recall should have been done for this but I guess that makes to much sense.

@_demon1k_

Жыл бұрын

Maybe the thickness of the tape you used was too thin

@kennysdetroit

Жыл бұрын

Do you have the link of where you got the (SL03) replacement screen?

@_demon1k_

Жыл бұрын

@@kennysdetroit check out this link www.ebay.com/itm/293468807390

@killswitchh

9 ай бұрын

Agreed, it's also a safety hazard trying to get your audio to work while driving.

@bobafittness1346

Ай бұрын

How has the SL03 been holding up? Bought one of those for my challenger and wonder if it will last…

I just installed a new digitizer but the the touchscreen is not working? I double checked the ribbon connections, I used white double-sided Gorilla tape (didn't completely go around the screen just to make it easy in the future to remove). Any ideas/suggestions why it the touchscreen is not work?

@_demon1k_

Жыл бұрын

If you replaced the original digitizer with a new one, the new digitizer might not be compatible with the device, but you shouldn't rule out a normal defective digitizer either.

@MrPuroMichoacan13

Жыл бұрын

@@_demon1k_ Thank you...did you have to reset the stereo. I tried holding down the volume and tune button for 20-30 secs and nothing happened. BTW I have a 2018 Ram 1500 Ecodiesel.

@_demon1k_

Жыл бұрын

@@MrPuroMichoacan13 No, I did not reset the system, I turned off the fuse before removing the uconnect

@_demon1k_

Жыл бұрын

@@MrPuroMichoacan13 uconnect will pull the settings from bcm itself

Lol is it really taking this guy, that long to take off the Bezel😮

What tools do I need? Please respond fully brother!!!

@_demon1k_

Жыл бұрын

Plastic spatulas, screwdriver, wire for glass separation cutting line, isopropyl alcohol, cotton rag and thick double-sided tape. And most importantly a lot of free time, the glue is a very long time to scrub

@trewardon4167

Жыл бұрын

@@_demon1k_ thanks

@trewardon4167

Жыл бұрын

@@_demon1k_ well I just fixed mines. Took me bout an hour an a half. I thank you so much once again!!! 🤚🏾high five lol

@_demon1k_

Жыл бұрын

@@trewardon4167 Awesome, glad it worked out for you✋

How much do you charge for doing this

@_demon1k_

Жыл бұрын

I don't do this commercially, it's a video for everyone to do it themselves, but I would recommend completely replacing the screen

Yesssssssssss

How long did it take to remove the screen

@_demon1k_

Жыл бұрын

The hardest part is carefully removing the dashboard bezel. Cutting the touchscreen took about half an hour. The whole job took a few hours

@christianmattia7740

Жыл бұрын

15 minute Job .

makes me wonder why they covered the whole screen with glue?

@_demon1k_

Жыл бұрын

The screen and touchscreen are glued to improve image quality and reduce glare from light reflection, using an air layer between the screen and touchscreen appear additional glare, which for the radio in the car is not very good

@jameskyle2238

Жыл бұрын

@@_demon1k_ ok, couldn't you put the tape all the way covering the screen? or would you not be able to see it then?

@_demon1k_

Жыл бұрын

@@jameskyle2238 No, the glue between the screen and the touchscreen is special, it is in a semi-liquid state all the time and tape is not suitable for this purpose.

@jameskyle2238

Жыл бұрын

@@_demon1k_ ok got ya on that. glad the dealer is replacing mine on the charger I just got.

simple fix get the LG S2 the S1s are crap. just the screen. The old digitizer are crap and replacing it is a no go they are considered one part.

@_demon1k_

Жыл бұрын

It is, but the price for a new screen is unreasonably high although it is a more correct solution to the problem.

@christianmattia7740

Жыл бұрын

@@_demon1k_ I got a OEM S2 for almost 400$ but was worth it. The dealership will replace it for around 500 to 575$. The new screens updated have 5 yr warranty and are not made like the old ones where the glue between the digitizer and the screen have separated. The cost of a new radio is outrageous 750 to 1200 depending on who you go to. Its a rip off. Now if you haven't done anything to radio and it's delaminating you can always call up uniconnect and tell them that you have the old style radio that delaminating and they should open up a case where if you buy the part they will reimburse you. Remember uniconnect makes the radio not Dodge hope this helps. They should have done them recall on all the earlier version screens cuz they all delaminate it's common problem with Dodge Jeep and RAM products.

@_demon1k_

Жыл бұрын

@@christianmattia7740 I agree, I also plan to replace

@zmaninpgh

Жыл бұрын

@@christianmattia7740 I called U-connect today. I bought my 2018 jeep grand Cherokee four months ago in about a month ago. I started have errors asking if I want to change my clock time and it shows up all of the time and as soon as I press the X3 appears constantly. They told me since my vehicle has 86,000 miles on it even though it’s four years old, they will not replace it because of high miles. I told them it’s a safety hazard. It changes the radio stations while you’re driving and changes the heat temperatures and I said it’s a safety hazard. The guy said he will not replace it but he will put a note for further review, I said this should be a safety recall for these reasons, and I said other people are talking about class action lawsuits against, you guys and he told me they were for the information of the republican party to whoever may or may not give a damn

@christianmattia7740

Жыл бұрын

@@zmaninpgh I agree it should have been recalled the old screens are crap I ended up getting a new radio because I had issues with the GPS card so if you're looking for a new screen let me know

It look dirty!

@_demon1k_

2 ай бұрын

It does, it takes a lot of time and wipes to clean off the glue between the touchscreen and the screen