Your videos just became even better, with the music while 3D printing and in the end when you tell us about your projects. You are THE BEST James !!!

James, keeps making awesome videos.

Loving the music over the printing clips, gives it such a dramatic and intense feel!

Forget Cosplay, you are the convention buddy! awesome show of suit mechanics!

These video updates are the highlight of my Tuesdays! Loving the progress so far!

Loving the music when you're printing!

The music that played during the 3D printing was a really nice touch. Keep it up, the suit's starting to look really good!

Your videos are consistently among the most entertaining and informative I've seen on all of KZread, and every time I see another one of your videos in my sub feed, I'm amazed at the rapid rate you consistently put out such high quality content! Also, I'm super excited to see how the pop-up weapon will look.

Taz: "Blimmey, this is hard work!!" Lulzbot: "Argh!! A talking 3D printer!!"

I like the timelapse. . . that was fun.

Ive been building my own hulkbuster suit and its pretty hard without a 3D printer or any knowledge of electronics. But none the less i think its really cool and i wouldnt have been able to accomplish what i did with out your videos!

Wohoo!, look at that table go! lol

I didnt know it was every tuseday cant wait for it the finish project will be amazing great job james

you deserve to have at least 10 times as many views as you do now ill do my best to spread the word of your channel!

Liked the speed the forearm went

I am constantly amazed at what you do...

You are a mad genius !!!!

When you get the mechanics sorted out, you might want to consider shortening the wires that pull the ring and little fingers, so that the hand looks a little more natural when it's closed. I always look forward to your videos. Thanks for sharing.

Yes..!! Finally some electronics are added to the suit !! Lots of 3D printing...hmm??? You show people that to waht extent they can use 3D printing..!! Keep it up !!

Like the new 3d printing music

I can't wait to see how this suit turns out!! Keep up the good work.

dude i am so exited for this to be complete it must be so fun being inside the hulkbuster

It looks great so far

Really awesome stuff James! Great work!

The music was a nice touch.

This is going to be awesome

James is looking great m8 I love it

amazing work as usual :) loving the projects, especially that xenomorph steampunk cosplay, also thats a sick set up you have there :D

You come up with great ideas

awsome, just awsome!!!!

Damn, 3d printing became EXTREME in this video! :D

Not the type of stuff I'm into so to speak, yet the creativity and 3d printing are very cool. So keep it up good vids...subscribed

I might be the only one on this, but I actually prefered no music over the printing clips x) Other than that great job as always, can't wait to see more of this!

Nice work, looking very nice indeed. The motors seemed to work really well, I actually thought the speed was neat, would give someone a jump opening up quickly and a weapon popping out. After all, when the bad guys come knocking you want your weapons out and ready dam quickly. :)

So inspiring, after I finish school I'm gonna build my own costume. I have watched this hole series and the alien one /a prude sub

That scene where you had the two 3d printers and the music looked like they were dancing

this is 4 years old!! - your Stillll awesome James =]

So cool !!!!!

I am looking forward to always

Your videos are epic I really love your ironman suits I one day want to do the sort of thing your doing :)

Don't know if you need and/or know this but I saw a way by which you could have a pivot for the had wrist that could be moved by a piston. This could be achieved by adding a pivot to the grey/silver piece, a pivot to the bar connecting to the repulser and a slot on the wood bar that the 3d printed red bar is connected to.

Your so gooooood

amazing!

Music during the 3D printing reminds me of the music form the original Command & Conquer. Is that your own music? Also those ball bearings you used for the screwdriver mounts; Are those just bearings from a skateboard? It's looking really nice by the way, I can't wait to see what you'll have done next week!

@luxcardell8822

10 жыл бұрын

Dancing 3d printers!

FINALLY MUSIC ON TIME LAPSES!!

Awesome

Omg its so massive :O Do you mind telling me your height for reference? It looks so awesome though! Much more detailed and in depth than i expected!

@rileylijana2520

10 жыл бұрын

***** whats going on with the alien costume

If you can do an american accent, I say you should be the next iteration of Tony Stark.

@noahroessler2978

8 жыл бұрын

+Wolfgang Kenshin ya:D

I literally laughed out load when the back of the arm burst open way faster than I expected. Im really looking forward to the weapons.

Chapeau

For what it's worth, wrist rotation happens closer to the elbow anyway.

RAISE YOUR GAUTIET OF ROCK!

Looks amazing already, seriously wondering how much the end result will weigh though. :o

This might have come up but I didn't find it. Are you planning on having the thumb and finger filaments come into a common block that is then attached to the motor? I was thinking this would make the pull on all of them inline with the fingers themselves so it would be smooth and uniform. You could place some small pulleys in the wrist area to redirect the filament for the thumb so it also pulls smoothly. (I should have said did you? Well, continue watching I suppose.)

wow the arm looks pretty big, cant wait till the rest of the arm is completed and connected to the suit. Also glad to see your poor lulzbot back in action, it was feeling lonely and left out thanks to its bigger brother. Does the vibration of the table from one printer effect the the quality of the other print?

Loving the suit so far, but I was wondering, why didn't u make the fingers of the Hulkbuster so that you could use your real fingers to move the corresponding finger of the suit? Also the music u added to the 3D-printing parts adds a nice touch to the videos, it makes the 3D-printing look more extreme than it is :D

@Hellstorm1190

10 жыл бұрын

Yeah I thought that might be the reason :P

Salad Fingers went and got some robot arms

Have you ever thought of getting a third 3D printer so you can get more stuff coming out? Would speed up your process around 50%

Would you make some more iron man armors, maybe war machine or iron patriot ;)?

Try to find a way to make the weapons slot open slower so that nothing breaks from the speed

Hi James! Have you ever considerd puting magnets in between the arm platós so they Can close properly?

Seeing as this is a custom design build would a new name make sense? Or something idk, I was just thinking about it and I thought it would be cool. Like it's still a hulkbuster, just not iron man's version. So maybe it's a Hulkbuster Custom XRo Class. Don't mind me I just let my imagination take hold sometimes. On another note, how would you make the "telescopic" weapon? Would it work kinda like the toy lightsabers? (Wowlongcommentsorry)

You are Real DukHoooooooo

Should probably build is an animatronic suit there's it will be or maybe a little bit

The foam fingers make alot of noise if you move them, Are you gonna keep it like that? or are you gonna fix that in the future? and how?

Put some sort of miniguns in the weapon slots

Really really like your videos :P But the music was kinda annoying, liked when it was calm and just print sound ^^

I want to see more Xenomorph

Hey James. I just wanted to ask about your channel icon (or picture whatever you want to call it) But i just wanted to ask if you have ever planned to get a cooler picture! I love drawing and i make channel icons for people all the time and it's not just minecraft pictures... I acctualy can do a lot of drawings that are not so restricted to squares... If you have any questions then just ask! :-)

Hi can you make Samus aran,s suit PS the Pawer suit

What are you going to do if you stumble or fall while walking around in the completed suit?

where did you buy your 3d-printer? :D ps: Great work with the mechanics for the arm :)

Is there any potential in outsourcing the 3D printing or is it too costly?

Did you study as an engineering and electronics or did you learn all this on your own?

Do you have any ideas for how to make this without a 3d printer?

the panels seem to be a little bit open on the side to the elbow?

hello I just Brazil's, which I precizo studying to be iqual to you, I really like meche in thing but as you do I have to study robotics applied? please help me

Why use such powerful motors? Wouldn't RC car motors be lighter and still have enough power?

What's happening with the 3d printed alien suit

when will the next ailien suit vid come out

I bet that he played with LEGOs as a kid. :)

How do you think this hulkbuster suit will take you?

Don't you think you're making the hands / arms a little too big? looks weird to be honest.

should have a sword telescope out

Do u have a scedule

@mtbkaidyn2224

10 жыл бұрын

oh u are amazing

Hi I am kgoodenough can you make me Samus,s arm gun please

make your video's longer

sorry but hulk buster have a 4 fingers not 5 in each hand.

@mychannelissecret

9 жыл бұрын

Takyuuga Onishi ....when you get too jealous is this really the best thing you can come up with to say?

@wolfiegaming4minecraft418

8 жыл бұрын

+Takyuuga Onishi its a model based off it,not exactly like it.

@sp3ctralatcha28

8 жыл бұрын

+mychannelissecret lol

Hey James! Do you ever get stressed because you don't know how to build a thing

Sorry James... But, am I the only one arround here who is not liking the look of how the arms are coming to?? =/

@OrangeAnon

10 жыл бұрын

No, the finger appearance and range of motion is really unimpressive/disappointing to me.

Are you a KZread partner? Cause you can earn a lot of money with your high view amount alone.

I literally laughed out load when the back of the arm burst open way faster than I expected. Im really looking forward to the weapons.