iPhone 13 Pro Max Screen Screen Repair Glass Only!
Ғылым және технология
Are you looking to save money and extend the life of your cracked iPhone 13 Pro Max? Refurbishing your cracked iPhone 13 Pro Max can be a great way to do that. In this video, we'll show you everything you need to know about refurbishing your cracked iPhone 13 Pro Max.
We'll walk you through the entire process step-by-step, from selecting the right parts, tools, and equipment. We'll also discuss how to properly perform every step in the refurbishing process.
Join my Refurb Community on Discord:
/ discord
Looking for refurbishing parts & equipment? Check out our web-store.
training.mrphonedoctor.com/shop/
**Want to learn how to repair?**
Click Here: training.mrphonedoctor.com/
Remember always mind the flex!
🔔 Subscribe for more repair videos & giveaways: kzread.info...
✅ Out our other repair videos
Apple - kzread.info?list...
Samsung - kzread.info?list...
Questions or need a phone repaired?
CONTACT US BELOW:
Free Repair Estimate?
mrphonedoctor.com/repair-rates/
Fill out this form and we will send you a prepaid label within 24hrs.
mrphonedoctor.com/mail-in/
Contact Us:
mrphonedoctor.com/
repairs@mrphonedoctor.com
575.639.3406
Follow Us:
/ mrphonedoctor
/ mrphonedoctor
/ mrphonedoctor
Snapchat - @MrPhoneDoctor
TikTok - @MrPhoneDoctor
SAY HI ON SOCIAL:
--Master Surgeon--
Javier V. Guzman Jr.
/ wopito
/ wopito
/ technoking
Пікірлер: 70
Hi, thanks for the vid! What's the reason we should remove the ambient sensor? Why can we not proceed without first removing the front modules? Thanks!
With the 12 and 13 series I find it easier to keep the frame, and try to carefully tuck a really thin plastic sheet between the glass and the display, and separate it with a wire using the guidence of the plastic sheet. Granted, it works better (obviously) on a not so damaged glass, but it's doable. That way you save 2 additional steps like separating the frame, and reapplying a new 1. And you can laminate it on a double foam plate. Perfect results every time.
@screensrefurbished
9 ай бұрын
What lamination settings do use for in-frame laminating ?
@Dariddda
9 ай бұрын
@@screensrefurbished 45c°temp, 25psi, 30sec vacuum, 45sec lamination.
@screensrefurbished
9 ай бұрын
@@Dariddda Thanks for that, do you use different settings for different screens? I had good results with those settings on 13 pro max but not the 14 pro max. Would you mind dropping me your WhatsApp number?
@alejandrorochinvaldez3406
4 ай бұрын
When laminating, do you use some type of glue in the frame, or just the oca?
@Dariddda
4 ай бұрын
@@alejandrorochinvaldez3406 no glue, just OCA.
Hey Crack What up, You know I just other way because I gotta a lot of screen for repair , but I has been learning from you , Just I dont take off the frame , I keep the frame and I just remove the glass and with this way it's work .
hi which oca do you take? unfortunately I have blisters more often
Hi, great video! How long do you leave the cold press glue to cure in the mold for?
@MrPhoneDoctor
Жыл бұрын
About 1 hour. See below for more assistance TECHNICIAN SUPPORT: Please submit your questions on our discord channel linked below. discord.com/invite/QnzbN5sQYQ
I've got a lcd but has 2 lines down it. I got it on eBay as that but wondering if that could be repaired when taking off my one on my phone I accidentally broke the ribbon so I went for one faulty on eBay without that but still has 2 lines on
Iphone 11 touch glass break but display and touch good working How much money change touch glass
What to do when there’s one bubble left in the middle that won’t go away after de bubbling?
Sometimes I ends up cutting the polarizer with the wire. Please suggest me how can I prevent that.
How to successfully repair the touch screen?. 1.Disconnect the hot plate machine and cryogenic cooler. How is the success rate high without defects during separation?
Do you do training ? As I’m looking to expand my store :)
@MrPhoneDoctor
Жыл бұрын
Hello yes we do training. You can email repairs@mrphonedoctor.com for all training inquiries.
How much it cost to replace?
I'm guessing like every other mold u need a separate clamp mold for every iPhone model?
@VegaSpydr
10 ай бұрын
yes
why use captron tape for glass?
Hello, I am Vahid from Iran I am doing glass replacement work here, but I need a series of tools. Is there a place? Please guide me, what is the best tool to open the LCD? And what is a good solvent and glue? I mean, what solvent and glue are used?
@MrPhoneDoctor
10 ай бұрын
Visit training.mrphonedoctor.com
Is the digitizer part of the front glass?
@MrPhoneDoctor
11 ай бұрын
Its not
Why did you not keep the frame on when cutting the OLED? Is it because of the large number of cracks?
@MrPhoneDoctor
4 ай бұрын
If you want a clean job every time frame must come off always. No shortcuts
What type of frame glue solvent is it? What is frame glue?
@MrPhoneDoctor
10 ай бұрын
Iso 99 cold press glue
what a liquid for the remove the glue mister?
@MrPhoneDoctor
Жыл бұрын
Iso 99
@johnkelon1188
Жыл бұрын
@@MrPhoneDoctor isopropyl 99% thankyu mr. phone master glass
You using liquid name ?
ayeeee!!!!
How much should a shop be charging for something like this?
@MrPhoneDoctor
Жыл бұрын
13 pro/ 13 pro max. Anywhere between 260-350.
👍👍
Hey, does someone know wich lamination settings to use for samsung a 50?
@harvi3759
Жыл бұрын
Pressure 2.5, vacuum 180s lam 20s, 70C
@truth5778
Жыл бұрын
@@harvi3759vakuum 50sec Pres. 1.5 lam. 15sec Temp. 75
@harvi3759
Жыл бұрын
@@truth5778 nice! Do you really get good results with pressure that low though?
@truth5778
Жыл бұрын
@@harvi3759 yes Bro
@harvi3759
Жыл бұрын
@@truth5778 what about s7 edge?
how much does it cost for you to replace my glass?
And keep in mind Apple doesn't like anyone repairing their phones but Apple, so if it detects parts that aren't genuine Apple, the phone won't work properly.
@BeyondWoWJunkies
Жыл бұрын
Aftermarket screens will function perfectly but a notification will appear. This doesn't change the OLED so the notification doesn't appear at all. You can also swap the IC chip from the original screen to the aftermarket screen to get rid of that notification if it bothers your clients.
hi which oca do you take? unfortunately I have blisters more often
@MrPhoneDoctor
Жыл бұрын
Mitsubishi
@alexanderraus8741
Жыл бұрын
Thx 👍🏻