I like this real video that normally was recorded As is.

would you mind adding a link to your orange handled scrappers for the glue please? Thank you

This is the second of your videos I have watched and during the start of this video I was thinking, Oh yeah by now I would have ripped the NFC or something, I kinda wish one of these "pro's" would mess something up, and POW you broke a back glass. I would like to thank you for doing that. Now I know I am not the only one to make little mistakes like that. Great video by the way

This is very good!!!!thank you for your sharing!!

Hey, can you list the types of blades you was using when removing the glass, Thanks.

Do you know where I can buy the back glass with the logo? The links you provided were taken down

Hey there what's the cable at 17:48? mine is cut and faceID stopped working alongside the 0.5 and telephoto lens. Im wondering if that snapped cable is the reason or not?

where do you get your blades??? i need some like that!

should i bring mine to apple to get fixed or should i go to a repair shop?

I can’t believe that Apple designed the phone that you have to scrape and break glass shards to replace they’re cheap back glass

@InUrGirl

11 ай бұрын

Shits dumb af

@MrScrimbo1

11 ай бұрын

Their

@bambambino23

11 ай бұрын

@MrScrimbo1 I thought I was the only one that did that LOL. But I actually just meant the word "the" LOL

@MrScrimbo1

11 ай бұрын

@@bambambino23 Oh yea lol, I didn’t even pick up that it was supposed to be “the” It irritates me the most when people don’t know the difference between “bought” and “Brought” I don’t know why, I’m shit at spelling and didn’t even get my English gcse 😂 If my phone didn’t highlight my mistakes I couldn’t say shit to anyone!

@joshharper7242

10 ай бұрын

The purpose is to get you to buy a whole new phone instead of going through this tedious process.

Wonderful video! Big thanx from Sweden :-)

What do u charge to do this to the iPhone 13 Pro Max?

Why don’t you use the back glass laser machine

I only use 180c around the camera area and have never had an issue yet.

Ok so I have a regular heat gun not a small one like this. Not sure if it matters ,but I'm sure it does a concentrated areas. With that said you going through the glass no issues at all compared to me. I only got the glass removed in the middle and areas where there was soft spots like antenna are and just a little at the bottom. Does glue removel help alot ? And is it dangerous to use?

@CJ-uu3lk

2 ай бұрын

Just be careful not to pull antenna and yes u should order decent heat station for 80 to 200$ and put Kaplan tape over that flash led light or it will melt and it's very easy to do ask me how I know 😂

@chadmiller756

2 ай бұрын

@CJ-uu3lk lol I took it to a shop and paid $100. There were areas I couldn't get the glass off. You realize I put the message up almost year ago. You must not check your channel often.

I like the hard style

Hey so when I used the glass breaker it dented the inside how do I change the force or pressure?

@auxc.6805

2 ай бұрын

Dont use a glass breaker bro this guy is crazy. Use a spatula and a heat gun. Just keep hitting the phone till youve got an in and then pry the rest off.

THIS is exactly why I do not repair back glass on iPhone 13 series and below. What a nightmare and a mess. I'm glad they have a replaceable back glass on the 14 series now - it's about time.

Don’t use punch toll near back camera and where the main board is placed. Back camera doesn’t not work properly like no focus and shaky. Main board is super sensitive and easily damaged by shock

Also noted to wholesale refurb shops use cold press with gun and small 1mm and 2mm tip makes all of the difference in world ans kaplan tape over led flashlight but overall he did good video showing how to repair with no laser machine

What happens if you are missing some of the magnets for the wireless charger?

@lightwxrk

Жыл бұрын

not an issue, magsafe still works fine if missing a few pieces

Sorry your first screen broke, but it it good to know that the pros can break on reinstall

what's the name of the black glue you're using?

@randooopik5019

Жыл бұрын

B7000

Can I ask what is the copper coloured circle please ????

@TechMDYoutube

Жыл бұрын

wireless charging

@h10vlogs

10 ай бұрын

@@TechMDKZreaddoesn’t peeling the original glass and replacing it have any affect on wireless charging v?

@jooli8128

2 ай бұрын

@@h10vlogsno, it’s just copper

when I do this repair i remove logicboard, camera, face id and flashligt, yes it's more work but I think it's much safer

@henriksvensson2836

4 ай бұрын

nice, how long would you say you spend on back glass repair per phone?

once the glass is removed, is the iphone no longer water resistant?

Where do you get the back replacement from

@levgordin7370

3 ай бұрын

Ebay

How much cost is the back glass for 13pro max

@idontevenknow4221

11 ай бұрын

15 bucks

25:43 when the rear glass breaks it's clear how fragile this is! 😕

sir I tried doing like u on my iPhone 13 pro max but I by mistakenly I removed a small part of the MagSafe and the phone stopped working so now what will be the cost to repair that thing ? plz reply asap

@KingIrvXL

Жыл бұрын

Ever figure it out?

@Victor-wn8hf

Жыл бұрын

Removed some of the magnets? Missing some magnets wont cause it to turn off. You might have ripped off one of the three copper wire connections of the wireless charging copper coil they are barely soldered and held down with glue. Check them and if one is disconnected scrape off the glue carefully and solder it back on.

Came to see if I could replace my own. I have learned I CAN NOT! 😂 I can do screens all day but no to this!

@henriksvensson2836

4 ай бұрын

Yeah same here, back glass look so frikking hard and so much work.. Was thinking about buying a laser but its still alot of work and not safe

Thanks Män!

Why are there magnets in there

I was breaking the glass in the back by the camera now my screen won't turn on is there a reason why

@KingIrvXL

Жыл бұрын

Did you ever figure it out?

@MultiColouredVagina

Жыл бұрын

You should remove the screen if you plan on doing this

Also, your not supposed tape on the sides, you need to use pressure clips (think of chip bah closers) on the edges, tape will not hold it down on each side evenly.

FACE ID WORK ?

@MultiColouredVagina

Жыл бұрын

😂

Clearly a small bit ov old back glass left uncleaned off -middle of 3 lenses-.

And this is less of a pain in the ass than doing the whole frame?

@DontHatemusiK

Жыл бұрын

Lmao right?

Our local iPhone repair place charges $300 for replacing back glass. Is that a reasonable price? 💭💸

They did that so you have to go get it fixed by them.

Please support the channel by using my amazon links! For just the Back Glass & Recommended Parts click on the links below. 13 pro max Back GLASS : amzn.to/3n3J5xx ( Black ) amzn.to/3QMJhz1 ( Graphite ) amzn.to/39CGho6 ( Sierra Blue ) Back Screen Protector " 2 PACK " amzn.to/3QtmFTX 3+3 PACK Screen Protector & Cam Lens amzn.to/3QsQoMC 13 pro max Silicone Case : amzn.to/3y5LvBW Hot Air Rework Station : amzn.to/32PXsyX amzn.to/3EQca5T Glass Breaker Pen : amzn.to/3HCFe32 amzn.to/3spmyh2 Safety Glasses : amzn.to/3fbBmcV amzn.to/3fbBpp7 Fume Extractor : amzn.to/3eXzsMB amzn.to/3eOI1cG Glue Remover : amzn.to/3HFGUbR Syringes, Plastic Squeeze Bottles and Needle Tips : amzn.to/3pU3pDF Clamp : amzn.to/32OcNA4 Cold Glass Glue : amzn.to/3sVkqiH Heating pad: amzn.to/3mbIytW Heat Resistant Gloves amzn.to/3EsZdyW My blue mat to keep everyone organized: amzn.to/3BalS16 iFlex Opening Tool with Glue Card : amzn.to/35UC9h8 iPlastix Opening Tool with Glue Card : amzn.to/38FtzUH on of my favorite screw driver sets 2uul: amzn.to/3jsqkCz amzn.to/3CcoL2Y iseasmo w/ Kit (Has Screw driver too) amzn.to/35Za2O0 Tweezers: amzn.to/3B7yBlf T-7000 Water sealing glue: amzn.to/3EdzLxs Isopropyl Alcohol For Technical Use: amzn.to/3BqBU78 Need to get a part from a reliable quick source, you'll find a better price here then Amazon and the quality will be a lot better. Click on the link below. www.injuredgadgets.com/?acc=be9b6cec65c863e1b55538d2c7fcc9b0 • Visit our Website: tech-md.com • My email: dustin@techmd.bz • To mail in your phone, please contact us at 801-438-6028

@47DaveeXP

Жыл бұрын

Great thumbnail lol

Mine broke in 1 week. Just removing the case… i will never buy a phone with Back glass anymore

Wie Dämlich muss mann seine 😂😂😂

Abee chuuuu. Camara ke niche glass fsa hai isliyee tut rhaa hai vo😂😂😂😂😂

So you want me to take apart my phone so I can replace the back of the phone? The last time I did this I ended up losing my whole phone and ended up having to buy a new one. So no thank you I’d rather pay someone $200 at least I know they know what they are doing and I don’t have to risk my phone again.

@MultiColouredVagina

Жыл бұрын

This procedure is scary

How about just stop buying these new garbage phones. Either buy a new one or toss the old one. I will never do another repair on these phones again. Apple can easily make the glass easily replaceable but they choose not too.