You have glue music applied in the corners after it gets too much. Less glue on the contours looks great and no residue to clean. Good job.

You are so talented and I absolutely love watching your videos.

Great video. I generally change the case and once I tried the glass only on a 11. That was a mess to glue the new one, I needed to put some elastics around the camera. Does the 14 pro max doesn't need that or you have a special glass?

great video, claear explained an really love your style!

Very informative. Thanks man

I’ve loved you for 1000 years. I’ll love you for 1000 more.

What is the air temperature in f and air speed and does it require using of the nozzle for the heat air gun

Hola 👋 Amigo Excelente Video de hoy Domingo de Celulares en Reparación 😁🙏❤️📱

Started out a little frustratingly with that hat. 😆 Ended as an excellent repair procedure process. “Thank You!”

@Electroprozinc

Жыл бұрын

Haha, still working out best camera angles.

Great work, always good at explaining things clearly, well done

@Electroprozinc

Жыл бұрын

Glad you liked it!

Where did you buy the back glass? I am having trouble finding one with apple logo on it.

Where do you get the glass?

Hi, What do you say about the lasers?

best explained procedure step by step, great job mate. Can I have some beginner's advice since I'm new in the business, I just ordered the basic equipment and any advice as a beginner would be welcome. Thanks in advance🙂

@Freedomishome

5 ай бұрын

amazing！❤

Excellent work and video!

@Electroprozinc

3 ай бұрын

Thank you very much!

hi i want mod speed for my step where can buy can you help please thanx

What type of glue did you used?

🔥🔥🔥🔥🔥

I’m happy to see your videos I’m doing microsoldring, and I would like to start back glass too , so I was wondering do you kind of person that you like laser machin , because in my experience I had fixed many phones that laser machine caused damage in it , is it the way that you use 99% safe ? And thank you for the good video I hope to see more videos form you like that in the future

@Electroprozinc

Жыл бұрын

To start, there is always risk wether it is heat method or laser. My preference is heat because it is cleaner for one and safer in a way. You still have to be careful around the frame openings

@naj3hoth231

Жыл бұрын

@@Electroprozinc thank you for replying, yeah you are absolutely right about that

I want this phone now

Water prof hai ya nhi

Nice video, thank you for doing that. I'm doing microsoldering and want to start replacing the back glass too. Can I ask where do you buy glass? Do you have experience from Aliexpress? Unfortunately there are not many suppliers in the EU that have these glasses available. Thank you!

@christopherabi6118

Жыл бұрын

I am glad you found my video helpful, I have not attempted to buy back glass other than from US based vendors. However one tip I would suggest asking your future supplier wether it is a two piece glass or not, if it is i would suggest avoiding those since they are more fragile and break easily.

Great work man. One question, does it affect the water resistance?

@ralfuzi

8 ай бұрын

Yes it does unfortunately, but so does the broken back glass so if you want to change it with apple and be factory sealed it’s 789€, and what the hell, you can buy a new phone, so i think this is your safest option, use a case u should be fine

I followed all the steps and completed the glass but now my 13 pro max is getting really hot and turned off completely now. What could be the issue?

Is this cheaper than buying a new housing? Seems like a lot of work. I’m assuming the Apple Store would use a new housing. I appreciate how detailed and careful you are. I hate dust lol

@Electroprozinc

Жыл бұрын

It is definitely more profitable doing glass only, also keep in mind this was a 14 so there isn’t really much housings in the market yet and if you come across one i am sure it is more expensive. Price of glass is sub $10 compared to housing price which is over $200

ok so never use glass breaker with camera present, 250hest nesr the flash is melting the flash so its no good idea too and i hope u removed battery

Great video!! Where did you buy those mini clamps?

@Electroprozinc

10 ай бұрын

Mobilesentrix

Hi, Temperature please ?

Good Job Bro!

@Electroprozinc

2 ай бұрын

Thanks!

Are there any good 3rd party replacements?

Great work but risky a bit!

very easy looking..

@Electroprozinc

Жыл бұрын

Thanks a lot 😊

good video, just curious why don't you use a laser machine to cut the glue out. its so much easier and you don't have to pry as much on the glass

@Electroprozinc

Жыл бұрын

Heat is cleaner for one. Depending on which laser machine you have, some you would need over 4-5 passes for the glass to come out easily.

@johnavanuchiha7898

Жыл бұрын

lasers are expensive

@floridaapplemacprosinc.2224

4 ай бұрын

better yet, you can replace the whole back for under 50 dollars

What do you use to clean the remains of the glue on the case?

@Electroprozinc

Жыл бұрын

Usually heat method takes care of that, but just in case u can use the flat exacto blade number 17 I believe.

Hi , which temperature I have to use with my heatgun ?

@Electroprozinc

Жыл бұрын

temp varies between heatguns, ours is set to 250c 60 airflow.

I don’t understand why they didn’t follow up with the iPhone 14 internal design

👍 🎉 gud

hey friend... there's no danger whith it mounted ? tks

@Electroprozinc

4 ай бұрын

Danger is always present, but you can easily avoid any issues when you are careful

how many degrees do you use to remove broken glass?

@Electroprozinc

Жыл бұрын

It should be in the video, but 250 celsius and 60 air if I recall.

Where do you get the actual glass replacement?

@johnsartain4160

3 ай бұрын

Ebay

Is there any chance to camera get damage or camera quality issue after excess heat in that area ?

@hanyassaf

8 күн бұрын

Mine is a bit foggy at zoom from 1 to 3

@Electroprozinc

8 күн бұрын

Yes it can get damaged from excess heat

Didn't the iPhone 14 pro max just get released?

does wireless charging works after fixing the back?

@Electroprozinc

Жыл бұрын

Yes it does, you have to be careful around the coil. It is only attached with one flex cable, also glass tends to go underneath so you can gently lift it up and blow the glass shards away.

Great tutorial! Thanks ❤

What if the magnets ome up with back how to replace

@Electroprozinc

2 ай бұрын

They are available for sale on mobilesentrix.com

Very Top Video , thank you very much. Profational work😊

@Electroprozinc

Жыл бұрын

Many thanks!

What would you charge for that kind of work 👍 great video by the way .l

@Electroprozinc

3 ай бұрын

for inquiries please email us at sales@electroproz.com

1，一定要拆机，否则高温可能损坏屏幕，即便不考虑损坏屏幕，也要考虑玻璃渣掉进去无法清理。 2，稍微专业一点的话，会更换小孔（这个型号有原装玻璃），而不是大孔假玻璃。 3，有专门的胶，而不是B7000，而且通常用胶枪打胶。 4，如果是我做，我会在打胶后使用夹子使得玻璃和中框充分贴合。

What happen wrong this Iphone 14 pro max?

what temperature did you use?

@Electroprozinc

6 ай бұрын

It should be in the video 250 heat 60 air

what is the heat and air?

@Electroprozinc

5 ай бұрын

250 60

Which temperature and air used?

@Electroprozinc

5 ай бұрын

250 60

Is this safe to do as a customer perspective? Will it damage your phone in the long run?

@Electroprozinc

10 ай бұрын

It doesn’t harm the phone if done properly. As a customer diy I would not recommend it tbh.

@ozenozdemir8516

10 ай бұрын

Would this be the same way apple would repair it

Hrd bg msc? Umah

What is the chip in that space at about 16:45?

@Electroprozinc

3 ай бұрын

are you referring to the nfc antenna?

@I2aMpAnT

3 ай бұрын

@@Electroprozinc not sure. I never repaired it and AT&T still took it as trade in for a $1000 promo towards the 15 Pro Max 🤷🏻‍♂️

Does the iphone have heating problems once the back glass is replaced?

@Electroprozinc

7 ай бұрын

No it should not

@unknownperson3774

7 ай бұрын

@@Electroprozinc also will it still look genuine even if i replace with a aftermarket back glass? Thanks again

@Electroprozinc

7 ай бұрын

Depending on the type of glass you use, it can look genuine yes.

Is this a silicone glue?

@Electroprozinc

10 ай бұрын

It is from mechanic t7000 (or t8000) I am not sure of the ingredients but doubt it is silicone

@Zorrof01

10 ай бұрын

Is the glass casing apple logo a sticker type or it’s like genuine iphone type that is painted or embossed

What type of glue ??

@Electroprozinc

Жыл бұрын

In this video I used t-8000, some people prefer cold press glue and others b-9000

@shovosokalbd.2110

Жыл бұрын

@@Electroprozinc i used same t8000.

🎉🎉🎉🎉

Great video I appreciate it! Got any tips on cleaning up glass afterwards? 🤣

@Electroprozinc

Жыл бұрын

Haha, well i keep a garbage can under the table and occasionally try to sweep as i go. It limits the amount of glass you’ll have to deal with afterwards.

@WoWBowz

Жыл бұрын

@Chris AD I'm thinking of making some sort of isolation box but it'll make the job harder 🤔 😅

I watch a lot of repair videos for the peace value honestly but everyone says not to hold the heat gun so long like you were? I’m interested in understanding how you didn’t cause damage doing so? No hate love ur vids

@Electroprozinc

Жыл бұрын

To me it is all about how much heat you are applying and the orientation. If you can see heat is applied at an angle most of the time and not straight focused on one area. This helps air to travel and warm up a larger area but less warmer than if you focus it straight down. In my case we use 250-60. This temp does not affect the board underneath even if you leave it focused in one area for a long time due to the fact that apple switched from low melt to a higher temp solder that joints the interposer. Also around the camera is where you need to be most careful with how you apply heat because you can actually melt the camera lens and you may melt the flash or get desoldered. Think of soldering and chip replacement if you can perform that with no issues, then removing glass with heat method has a similar concept which is move heat to another area once piece is removed. Also, Plenty of videos will show you a botched frame full of scratches and dents. This helps minimize pressure applied to frame and causing less scratches and dents because it is warm enough for glass to lift easily but not warm enough to cause any damage to other components.

@CornHugs

7 ай бұрын

@@Electroprozinccelcius or ferenhiet?

@patriciovarela8794

7 ай бұрын

​@@CornHugsCelsius

@RizwanMushtaq-ex7ki

7 ай бұрын

​@@Electroprozinchffbffffhfh 38:17 38:17

@Skygrey187

6 ай бұрын

@@CornHugsdoes the magnet comes off and can it be put on back? Or do you have to replace it, if so where do you get the magnet replaced

250C is a bit much, I melted once some plastic parts in the inside with less heat. And also for the battery so much heat is bad (it’s better to take the phone appart, even if it takes more time). You should be more careful with the edge, it seems you scratched the frame on the top (it also happened to me).

@Electroprozinc

Жыл бұрын

Everyone is comfortable with different heat settings, to me this is ideal. As far as the frame it may seem like that probably due to the angle of the camera. Also keep in mind it is all about how you apply the heat in order not to melt anything you can’t hold it in one spot for too long.

@bencevekony2010

Жыл бұрын

Hy i dont want to judge anybody this is only my opinion I always dissassemble the phone fully before start to heat the back glass and i am using 350-400 celsius and i never melt any plastic part on the phone i am currently working on. I think if you have to replace the backglass with heat or laser machine you should always take off the screen and take out the motherboard cuz you can easily damage the motherboard or the screen I,ll say once more it is only my opinion is working for me well And sorry for my english!

@shovosokalbd.2110

Жыл бұрын

@@bencevekony2010 agreed with u, i did all time like u, its all time tension free

@irepairofpc31familykartrac51

11 ай бұрын

I use 180c along with super glue remover. 250c can melt to much stuff or if a board repair had been done with low melt solder it can cause issues with that. It takes a little more to remove it but it is much safer.I unplug the battery only and have never had an issue with damaging anything, knock on wood. I also move around on the phone so one spot doesn’t get to hot.

В такой ситуации надо разбирать телефон . там можно и замкнуть и спалить .

if you don't replace the original glass, the LIDAR sensor will not work

@Electroprozinc

Жыл бұрын

There are 2 types of back glasses on the market: two piece glass which is cheap and breaks easily and there is 1:1 one piece glass that is significantly higher quality and compares to oem.

@bendher00

3 ай бұрын

Most back glass blocks LIDAR. Test it before glue

@Electroprozinc

3 ай бұрын

1:1 back glass from expressbackglass.com does not block the LIDAR.

Yo lo veo bien porque lo va a reparar no se

@Electroprozinc

3 ай бұрын

Estaba roto en una esquina.

This should only take “2 minutes!”

RIP battery

my torch not working now

@Electroprozinc

Ай бұрын

You need to replace it

@spanishjohn420

Ай бұрын

@@Electroprozincdo I just need to replace the actual light part that came off? I can replace from the back?

@Electroprozinc

Ай бұрын

You need to replace the whole flex from inside it is better

@spanishjohn420

Ай бұрын

Well that’s fucked

I dont recommend anyone doing this, simply will damage the phone. Using laser remover machine is the way to go if you run business.

hot

Defo damaged the camera

@Electroprozinc

10 ай бұрын

Defo not…

i fix phones, and i will never risk the internal components from my costumers phone 😬

@Electroprozinc

8 ай бұрын

There is no risk for internal components unless you are careless doing this type of repair.

Glass was replaced previoulsy. Using heat is bad the original apple glass you want to use the laser. The replacement glass no need to use that kind of heat to get it off.

Im still shocked that we allow apple to do this with us.. iphone 7 was the best matt black aluminum, i dont give a f about wireless charging u plug in cable and it charges wtf

Guys got people who see that this thing is ez I would not recommend it to anyone I have worked on this alot I have experienced alot of issues with this which can sometimes destroy the motherboard I then used my friend laser machine if you guys want to start with something like use laser because this things sometimes will not work and if you have a 14 pro and its cracked and you destroyed the motherboard you will have alot of problems with the customers or your self I have lost 20 phones from this repair even I used air flow 40 with 180 c° it also brick the phone will not recommend this repair to anyone

@Electroprozinc

5 ай бұрын

It is not possible to destroy the board with 40 air and 180c heat. You probably used the punch tool. Using the punch tool on top of the location of the board can break chipsets inside the bottom board. We have done thousands of phones using this method with zero issues. If you are a careful person, issues like the ones you mentioned can be minimized.

Did you take the screen off and take the camera and everything out? Or did you leave it in?

@Electroprozinc

Жыл бұрын

It is recommended to remove them, however we have done multiple without removing anything and haven’t had a single issue. The trick is to be aware and careful

Very detailed operation, thank you for sharing,if you are interested in repair tools, please contact me.

@Electroprozinc

3 ай бұрын

we buy from you as well

I want this phone now