If we don’t have the heating element do you have a suggestion for what we should/can use?
@andriunasd14 күн бұрын
ok so never use glass breaker with camera present, 250hest nesr the flash is melting the flash so its no good idea too and i hope u removed battery
@kearlcharles62125 күн бұрын
This board does not require programmer?
@pacboy2427 күн бұрын
This should only take “2 minutes!”
@tommiolavi27 күн бұрын
Whats that usb "convertor" connected to bench power supply? I need one!
@ferhatkurt8898Ай бұрын
Hi, What do you say about the lasers?
@user-cc1wl8pz2xАй бұрын
В такой ситуации надо разбирать телефон . там можно и замкнуть и спалить .
@spanishjohn420Ай бұрын
my torch not working now
@ElectroprozincАй бұрын
You need to replace it
@spanishjohn420Ай бұрын
@@Electroprozincdo I just need to replace the actual light part that came off? I can replace from the back?
@ElectroprozincАй бұрын
You need to replace the whole flex from inside it is better
@spanishjohn420Ай бұрын
Well that’s fucked
@Pcut2 ай бұрын
Im still shocked that we allow apple to do this with us.. iphone 7 was the best matt black aluminum, i dont give a f about wireless charging u plug in cable and it charges wtf
@_FRANK_LIN2 ай бұрын
Is there any chance to camera get damage or camera quality issue after excess heat in that area ?
@hanyassaf21 күн бұрын
Mine is a bit foggy at zoom from 1 to 3
@Electroprozinc21 күн бұрын
Yes it can get damaged from excess heat
@devinbusher30262 ай бұрын
Where did you buy the back glass? I am having trouble finding one with apple logo on it.
@aktech32712 ай бұрын
What is the air temperature in f and air speed and does it require using of the nozzle for the heat air gun
@user-jn8py4yj9g2 ай бұрын
Why change the processor and RAM? Why can't you just change the EMMC?
@Electroprozinc2 ай бұрын
It’s not an EMMC it’s a UFS. It’s encrypted and needs to processor to be transferred as well.
@avsamuel2 ай бұрын
RIP battery
@iggyscott1872 ай бұрын
What if the magnets ome up with back how to replace
@Electroprozinc2 ай бұрын
They are available for sale on mobilesentrix.com
@abgbomba27962 ай бұрын
What temperature and what speed blower you used to remove the ic sir?
@shelbyGT402 ай бұрын
Not for 1708
@Electroprozinc2 ай бұрын
Really? How so
@SJ-oxy2 ай бұрын
Yes, this is for a 1708 (base macbook).
@brandonlee15472 ай бұрын
I’ve loved you for 1000 years. I’ll love you for 1000 more.
@enryfrank3 ай бұрын
What about Tip to Ground Potential ? ....this is a big problem for the T3A T3B !!
Very detailed operation, thank you for sharing,if you are interested in repair tools, please contact me.
@Electroprozinc3 ай бұрын
we buy from you as well
@undroptik6 ай бұрын
Hi, Temperature please ?
@adeelanwar56906 ай бұрын
I followed all the steps and completed the glass but now my 13 pro max is getting really hot and turned off completely now. What could be the issue?
@davidnelson30266 ай бұрын
I dont recommend anyone doing this, simply will damage the phone. Using laser remover machine is the way to go if you run business.
@Toqhy6 ай бұрын
Guys got people who see that this thing is ez I would not recommend it to anyone I have worked on this alot I have experienced alot of issues with this which can sometimes destroy the motherboard I then used my friend laser machine if you guys want to start with something like use laser because this things sometimes will not work and if you have a 14 pro and its cracked and you destroyed the motherboard you will have alot of problems with the customers or your self I have lost 20 phones from this repair even I used air flow 40 with 180 c° it also brick the phone will not recommend this repair to anyone
@Electroprozinc6 ай бұрын
It is not possible to destroy the board with 40 air and 180c heat. You probably used the punch tool. Using the punch tool on top of the location of the board can break chipsets inside the bottom board. We have done thousands of phones using this method with zero issues. If you are a careful person, issues like the ones you mentioned can be minimized.
@RanInt6 ай бұрын
Are there any good 3rd party replacements?
@naidol6 ай бұрын
You can't blindly recommend the T3B ... It's a 96w station. Only supports C210 & C115 handles. The T3A is 200w and only supports C245. If you need both C245 and C210, you should look at the new T320 or the T420 models.
@ajnasaju85416 ай бұрын
what is the heat and air?
@Electroprozinc6 ай бұрын
250 60
@chadwickduhon50426 ай бұрын
Do they have available accessories for the rear voltage output? Or what can it support?
@raghavendramayya99026 ай бұрын
T3A is T245 tip and T3B is T210 small tips for SMD
@risingsun72976 ай бұрын
what a pain in the ass
@marxferrobonfim13547 ай бұрын
what temperature did you use?
@Electroprozinc7 ай бұрын
It should be in the video 250 heat 60 air
@nrette7 ай бұрын
Great video. I generally change the case and once I tried the glass only on a 11. That was a mess to glue the new one, I needed to put some elastics around the camera. Does the 14 pro max doesn't need that or you have a special glass?
@unknownperson37747 ай бұрын
Does the iphone have heating problems once the back glass is replaced?
@Electroprozinc7 ай бұрын
No it should not
@unknownperson37747 ай бұрын
@@Electroprozinc also will it still look genuine even if i replace with a aftermarket back glass? Thanks again
@Electroprozinc7 ай бұрын
Depending on the type of glass you use, it can look genuine yes.
@XtianApi7 ай бұрын
T3a now has the new holder. T3b is less than the half the power and for smaller stuff. So saying they are the same head unit is inaccurate. Plus, t3a can be ordered with the 345 pencil, which supports genuine jbc tips. It's the best choice for me and most people. Also, it's not copper, but brass for the cleaners. :) sorry to be that guy
@Electroprozinc7 ай бұрын
It is okay to be that guy. I admit I may not have had all the info when I was provided with it I was not aware of these differences. Thank you for clarifying that up.
@XtianApi7 ай бұрын
@@Electroprozinc no worries. I still enjoyed the video. Also it took me forever when I was buying one of these to figure out the differences. I had to scour forums. Thanks! P. S. Very cool reply, level headed
@robertbishop92295 ай бұрын
I'm trying to find the 345 sodering iron handle that you say supports JBC tips. Can you post a link please? Thanks in advance!
Пікірлер
If we don’t have the heating element do you have a suggestion for what we should/can use?
ok so never use glass breaker with camera present, 250hest nesr the flash is melting the flash so its no good idea too and i hope u removed battery
This board does not require programmer?
This should only take “2 minutes!”
Whats that usb "convertor" connected to bench power supply? I need one!
Hi, What do you say about the lasers?
В такой ситуации надо разбирать телефон . там можно и замкнуть и спалить .
my torch not working now
You need to replace it
@@Electroprozincdo I just need to replace the actual light part that came off? I can replace from the back?
You need to replace the whole flex from inside it is better
Well that’s fucked
Im still shocked that we allow apple to do this with us.. iphone 7 was the best matt black aluminum, i dont give a f about wireless charging u plug in cable and it charges wtf
Is there any chance to camera get damage or camera quality issue after excess heat in that area ?
Mine is a bit foggy at zoom from 1 to 3
Yes it can get damaged from excess heat
Where did you buy the back glass? I am having trouble finding one with apple logo on it.
What is the air temperature in f and air speed and does it require using of the nozzle for the heat air gun
Why change the processor and RAM? Why can't you just change the EMMC?
It’s not an EMMC it’s a UFS. It’s encrypted and needs to processor to be transferred as well.
RIP battery
What if the magnets ome up with back how to replace
They are available for sale on mobilesentrix.com
What temperature and what speed blower you used to remove the ic sir?
Not for 1708
Really? How so
Yes, this is for a 1708 (base macbook).
I’ve loved you for 1000 years. I’ll love you for 1000 more.
What about Tip to Ground Potential ? ....this is a big problem for the T3A T3B !!
Explained in the video as well
Good job 👍
Thanks 👍
Good Job Bro!
Thanks!
What heat and air speed you using broski ?
It should be in the video but it is at 420 90
1,一定要拆机,否则高温可能损坏屏幕,即便不考虑损坏屏幕,也要考虑玻璃渣掉进去无法清理。 2,稍微专业一点的话,会更换小孔(这个型号有原装玻璃),而不是大孔假玻璃。 3,有专门的胶,而不是B7000,而且通常用胶枪打胶。 4,如果是我做,我会在打胶后使用夹子使得玻璃和中框充分贴合。
Yo lo veo bien porque lo va a reparar no se
Estaba roto en una esquina.
hi i want mod speed for my step where can buy can you help please thanx
hot
hey friend... there's no danger whith it mounted ? tks
Danger is always present, but you can easily avoid any issues when you are careful
❤
What is the chip in that space at about 16:45?
are you referring to the nfc antenna?
@@Electroprozinc not sure. I never repaired it and AT&T still took it as trade in for a $1000 promo towards the 15 Pro Max 🤷🏻♂️
Excellent work and video!
Thank you very much!
Camera man is dancing... now I'm dizzy
Which temperature and air used?
250 60
What would you charge for that kind of work 👍 great video by the way .l
for inquiries please email us at [email protected]
Cual es la diferencia entre la t3a. Y la t3b????
Very detailed operation, thank you for sharing,if you are interested in repair tools, please contact me.
we buy from you as well
Hi, Temperature please ?
I followed all the steps and completed the glass but now my 13 pro max is getting really hot and turned off completely now. What could be the issue?
I dont recommend anyone doing this, simply will damage the phone. Using laser remover machine is the way to go if you run business.
Guys got people who see that this thing is ez I would not recommend it to anyone I have worked on this alot I have experienced alot of issues with this which can sometimes destroy the motherboard I then used my friend laser machine if you guys want to start with something like use laser because this things sometimes will not work and if you have a 14 pro and its cracked and you destroyed the motherboard you will have alot of problems with the customers or your self I have lost 20 phones from this repair even I used air flow 40 with 180 c° it also brick the phone will not recommend this repair to anyone
It is not possible to destroy the board with 40 air and 180c heat. You probably used the punch tool. Using the punch tool on top of the location of the board can break chipsets inside the bottom board. We have done thousands of phones using this method with zero issues. If you are a careful person, issues like the ones you mentioned can be minimized.
Are there any good 3rd party replacements?
You can't blindly recommend the T3B ... It's a 96w station. Only supports C210 & C115 handles. The T3A is 200w and only supports C245. If you need both C245 and C210, you should look at the new T320 or the T420 models.
what is the heat and air?
250 60
Do they have available accessories for the rear voltage output? Or what can it support?
T3A is T245 tip and T3B is T210 small tips for SMD
what a pain in the ass
what temperature did you use?
It should be in the video 250 heat 60 air
Great video. I generally change the case and once I tried the glass only on a 11. That was a mess to glue the new one, I needed to put some elastics around the camera. Does the 14 pro max doesn't need that or you have a special glass?
Does the iphone have heating problems once the back glass is replaced?
No it should not
@@Electroprozinc also will it still look genuine even if i replace with a aftermarket back glass? Thanks again
Depending on the type of glass you use, it can look genuine yes.
T3a now has the new holder. T3b is less than the half the power and for smaller stuff. So saying they are the same head unit is inaccurate. Plus, t3a can be ordered with the 345 pencil, which supports genuine jbc tips. It's the best choice for me and most people. Also, it's not copper, but brass for the cleaners. :) sorry to be that guy
It is okay to be that guy. I admit I may not have had all the info when I was provided with it I was not aware of these differences. Thank you for clarifying that up.
@@Electroprozinc no worries. I still enjoyed the video. Also it took me forever when I was buying one of these to figure out the differences. I had to scour forums. Thanks! P. S. Very cool reply, level headed
I'm trying to find the 345 sodering iron handle that you say supports JBC tips. Can you post a link please? Thanks in advance!
amazing!❤