This man needs more subs he’s rlly goood

@MBoardsco

5 жыл бұрын

Thanks for watching!

@reptiloidx8942

5 жыл бұрын

@@MBoardsco HEY THERE MAC WHAT VESC DO WE NEED TO USE TO CONTROLL 4 ELECTRIC MOTORS ??? THANK YOU

@ashick4141

Жыл бұрын

at what??

wow this vid is so clear and professional, I finally have clear answers to my E skateboard questions

I was wondering if you could make a video on how to charge the batteries using a 3 pin brick charger, rather than a balance charger :)

Could you make a video with a charging solution to this setup/and enclosure? Waiting for this kit! Awesome work!

@MBoardsco

5 жыл бұрын

Absolutely. Once we get our kits set up we will make a solid step by step guide on everything.

How do you keep dirt and debris out of the pully system and motor? Also how fast can this build go? Is it better to run a motor on both the front and back? One more: How much noise does this build make?

Great vid man, 1) would love to see some AT wheels in store 2) a video on what goes into making a 18650 battery and in depth BMS Wiring

@MBoardsco

5 жыл бұрын

In the coming months we plan on expanding our product line to cover AT boards for sure. And we will most likely be doing a BMS/Battery Wiring Video as well.

@bushratbeachbum

Ай бұрын

​@@MBoardscogot the bms video made yet? Im converting a VERY heavy old at board with a truck starter size motor in to a slightly more user friendly version. Need some guidance on bms selection and the different ways you can wire them

You are a HERO

Are you charging through the esc or through a separate bms in the battery pack? What bms and cells are you using?

Have you tried jumping off of curbs how does the motor handle high impact?

What is your opinion about hub motors? Where the motor is inside of the wheel..

Just subd great info was curious about an esc and remote setup together to make life easy which you covered. Think it's time to order some parts many thanks.

So I bought a Dreskar FT001 and although it should be viewed as a huge saftey concern it got me hooked on skateboarding without pedaling. My question is I need a new esc. I have been racking my brain tryin got figure out if these dual esc's on eBay wwould work for belt driven. The sellers are either sure...yeah or no way needs different firmware. So I come to you my help. Do you see any easy eBay solutions or is it complex and more difficult tha just switching out?

Great video, I'm waiting for tutorial in which you will tell about vesc setups (from mboards)

@landjunior

5 жыл бұрын

Vesc setup will help a lot! 0/

@MBoardsco

5 жыл бұрын

Thanks! We're working on a lot of new content and will be covering that in a video soon.

Can u tell me battery and motor specs best to use in budget

Will you ship internationally

@MBoardsco

4 жыл бұрын

Yes we ship worldwide 😎

Just perfectly detailed

What mm riser pad do you need

Can we get a full tutorial?

Hey dudes, can I buy a remote that will work with an evolve gen1?

I have an old ebike battery will that work?

Hey thanks for the vid it really helps. I am going to build an electric skateboard but I am 17 and cash isn't exactly my sweet spot so which parts do you think I should cut down on for a cheaper build? I am looking for a good all round build and my motor is likely to be a 6354 180KV.

What do you want direct drive?

How do you program he ESC for a 2 motor configuration or even 4 motor. What program software do you use and how do you use it?

Hello, i was curious as to what the internals of the remote are like? i would like to take them out and some how mount them on a DSLR Camera Cage. What would your thoughts be on this ? thanks ! - this is a project i have been thinking about for a while

Can you provide....ROHS. Ru 94U-D. E253642Y-D circuit board...thx..

Thanks,that what I have been looking for,the equipment, thanks

Hey I have an interesting dilemma. I have a boosted board v2 but I lost the remote and charger. I can’t find these for a reasonable price on the internet, are there any other remotes or chargers that would work? Any help is extremely appreciated Thanks

Dude I'm 6'3" 290-320 depending on the season. I plan to build my battery out of lipo cells (5*2s high drain) with a 10s bms ( cuz you guys don't do payment plans lol) anyway I want a belt drive but what size motor I've been looking at a 6374 170kv for the extra torque as my mass is like twice that of most e boarders I've seen. I have a duel caged 63mm mount in mind to add another motor down the road will this be enough to drag my big ass around town

is a 7000 mah 14.8 volt 4cell lipo enough ? its connected to a 19000 kv brushless motor nuw the motor should be powerfull enough but i dont know alot about the battery... And the highest i can go is 6 cell lipo, but that seems a bit overkill

@music_0173

8 ай бұрын

well there are reactions here 2 to 4 years old never responded, ill just figure it out myself i guess

So i'm looking into direct drive motors. But I don't know which motors go well with what ESC and battery. I'm looking at the revel kit but i wanna do something a bit more hands on and the undercarriage of the enclosure sticks out a little too much for my liking. if anyone could give me a list of components that work well together i would be incredibly appreciative. money isn't a problem as its something i'll be saving for over time although that being said, I'm not looking to spend thousands.

What amperage and voltage is needed to propel a person? What is the rating on the battery in your hand in this video? Thank you for your help!

@music_0173

8 ай бұрын

36V 6000mAh 216Wh, thats everything i could find about the battery

Hello Mr. Beard. The link under "Full Kit of Items Mentioned Available Here:" doesn't work.

Could you make a video about how to pit MBS off-road wheels on your diy boosted board

Nice work! 😊

hiya i was looking at the all in one kit and i was wondering why you need riser pads?

@MBoardsco

5 жыл бұрын

Riser pads help give your board extra clearance. Many times the motors sit too close to the bottom of the deck. They also help with road vibrations.

Can a boosted battery work with any esc ?

Ya that would be super nice I'm having trouble with wiring my bms

I was just wondering if the sensor wire is necessary for the motors to spin, and I was wondering why the motor has a slot for six of the prongs in the sensor wire but there isn’t a plug for it on the ESC

@MBoardsco

5 жыл бұрын

The sensor wires are not necessary. Depending on your motor and esc combo the sensors might not be compatible.

The problem is all them parts costs as much as a brand new already assembled e skateboard. Mind as well just buy one. Except it's too dayum expensive. As expensive as a really good e-bike.

hi we have many kind of esc vx do you want to try

How much time dose ist take to send the 90mm hub Motor to Germany

@MBoardsco

4 жыл бұрын

All of the shipping costs and times are shown at check out 👍🏻

Hey man what do u suggest to make $300 skateboard?

What is the fourth wire?

Please answer this comment I want to , but I was wondering if you had like classes or some stuff like that , cause I'm 13 and want to make one instead of buying one

@MBoardsco

3 жыл бұрын

Would love to offer classes in the future! Have to figure out how we’d do something like that wether it be online or in person. Open to ideas!

Are motors fairly water resistant on their own, or do they need an enclosure? Like running through a puddle of water or getting caught in the rain sorta water resistance.

@MBoardsco

5 жыл бұрын

Brushless Motors are relatively water resistant. Riding over some wet ground once in a while won’t hurt. Can’t recommend you riding in the rain or through a puddle but we have seen it done many many times.

i want to build my own DIY board but the parts are soo expensive here in the Philippines

@MBoardsco

2 жыл бұрын

Buying parts from abroad is definitely difficult. I’d urge you to reach out to our support team. They may be able to come up with a solid kit for you and find the best shipping option.

Dude I’m glad I saw this - I’m probably your dads age lol but that doesn’t matter right. Growing up kids got into BMX or later mountain bikes or even roller blades - I stayed with my skateboards 🛹 and not that pressing on “goofy” isnt a drag but shit man ……. Building my own eboard would be dope. So with that HELP ME brother. I have a few sector 9’s and I love em’ looking at an Arbor but for now I want my sector 9 longboard to be electric - where do I start ? 15mph is probably good enough for me

How long is the minimum board length for these parts?

@music_0173

8 ай бұрын

depends on wich parts u are using...

@music_0173

8 ай бұрын

but as long as you dont use like a penny board or something super small, just a regular size skateboard you should be fine

Is it possible to rotate the motor in both directions with ESC FSESC 4.12 50A Based on VESC® 4.12?

@MBoardsco

4 жыл бұрын

Yes, you can program the motor to go forward and reverse.

@maikeramos6469

4 жыл бұрын

@@MBoardsco thank you so much

Does the controller tell you how much battery life you have left, or do i have to but the battery display??

@MBoardsco

5 жыл бұрын

The remotes for the basic ESCs show how much battery you have left right on the remote. For Vesc users, a battery percentage indicator will be necessary.

hello.. how do you charge it?

Great video could you include the wheels in the links? Also maybe a bulk link to have all parts in basket on store then we can just pick a deck and compartment :)

@MBoardsco

5 жыл бұрын

We’re currently working on building kits so everything you’ll need can be purchased all at once. That way nothing is forgotten and a lot of the guess work is removed. Thanks for watching!

@mattkainicram

5 жыл бұрын

@@MBoardsco keep up the good work hope shipment to UK isn't to expensive

Hey Mike, How much speed can I get out of a motor which is rated 170 KV and has an output of 2800 watts ?. Please Answer my Question, I would highly appreciate it.

@alinawaz1091

5 жыл бұрын

Please Reply Respected Mike Beard

@MBoardsco

5 жыл бұрын

It depends on the size of the wheels, voltage of the battery, and gearing ratio.

@alinawaz1091

5 жыл бұрын

what about 90 mm wheels , 10 S battery ; Then how much speed can I get out of a motor rated 170 KV with a power output of 2800 watts@@MBoardsco

How do you charge the battery

@MBoardsco

3 жыл бұрын

There is a charge port attached to the battery.

If I want to make it a dual motor, what parts would I need for that?

@MBoardsco

5 жыл бұрын

You’ll need to follow the same parts list with a few differences. You’ll need 2 of the following instead of 1: Motor mounts Motors Vescs Pulley Systems Let us know if you have any other questions! We’re always here to help.

How far and fast would you go on a 10s3p 8Ah 42v battery?

@MBoardsco

5 жыл бұрын

Although number of factors like rider weight, wheel size, gearing ratio, etc effect top speed, 10s batteries get you speeds of around 25mph.

Are there brakes?

@MBoardsco

4 жыл бұрын

Yes 👍🏻

Not all of the links work

@MBoardsco

6 ай бұрын

This video is quite old now. I’m sure they need to be updated. Will update asap!

@frozenlillypad2070

6 ай бұрын

@@MBoardsco ❤😊

Esk8 101. Good video

@MBoardsco

5 жыл бұрын

Thanks for watching!

how do you pick the belt size?

@MBoardsco

4 жыл бұрын

Belt size can be a bit tricky. It all depends on your motor pulley and wheel pulleys diameter as well as distance between the them. Any specific parts you need a belt for?

@gageglover3734

4 жыл бұрын

@@MBoardsco I ended up getting the 10mm 16t pulley and the 66t pulley so I ordered the 365 mm belt

Is the battery rechargeable?

@MBoardsco

4 жыл бұрын

Yes 👍🏻 Would be very short lived fun if it wasn’t 😎 Let us know if you have any other questions!

How do you charge the board?

@MBoardsco

4 жыл бұрын

A simple charge port would be added to the outside of what ever enclosure you go with.

@madladdan

4 жыл бұрын

@@MBoardsco So your batteries have a bms then.

HI, could you reply if I ask you a question?

@MBoardsco

3 жыл бұрын

Yes 👍🏻

@thewizardoffootball6439

3 жыл бұрын

ok thx , could these shipped to Qatar I really want this

@MBoardsco

3 жыл бұрын

We ship world wide 👍🏻

@thewizardoffootball6439

3 жыл бұрын

@@MBoardsco ok, thx

Love the video but your links need updated

@MBoardsco

9 ай бұрын

Yes they probably do! This video is quite old! We’ll comb through these and update asap!

@alttransport3445

9 ай бұрын

@@MBoardsco yes , because there is always someone new to building like me . 😃

@MBoardsco

9 ай бұрын

@alttransport3445 If you have any questions shoot us a message on Instagram @mboardsco Or shoot us an email support@mboards.co :)

Are e skateboards 1 wheel drive because that sounds dangerous

@MBoardsco

2 жыл бұрын

Some have only 1 motor, but I wouldn’t call it dangerous

just sud these is interesting

you only need ONEWHEEL to have the best esk8