Thanks for taken the time to share your experiences with this USB tool. Your English was fine, no need to apologise, its better than my German lol

@NSC-Modz

6 жыл бұрын

Hehe You Welcome ;)

Very thorough and I definitely had a few of these problems so thank you! with your video and one other that I needed for my specific chip I was able to accomplish my task and I'm a first time user of anything like this. Thank you thank you thank you!

@NSC-Modz

3 жыл бұрын

Thank you to and you always welcome :)

ACE! Very thorough. Thank you for your custom folder (your 1st link in the description):it saves time and has everything we need, besides the BIOS file which depends on the card being flashed. A1 vid.

@NSC-Modz

3 жыл бұрын

Thank you, you always welcome ;)

I bought this exact black bios flasher because my lg tv 55EG910T -TB died i have been told to try reflash flash the chip since there is power standby and the hardware all seems to be ok. Only your video is the only one i saw and now i am very clear on how to proceed.Before i do thank you very much for the video .Its one of the best clear cut explnatory videos i have seen .I have suscribed and given you thumbs up.Cheers and thank you again.

@NSC-Modz

4 жыл бұрын

You always welcome and thank you very much to for your great comment. Wish you the best :)

Kind Sir, THANK YOU! this video helped me A LOT for saving my Asus maximus iv gen Z from the trash, this kind of videos helps to make the earth a better place and reduce electronic waste. Thank you thank you and thank you!!!!!!!!! people like you makes youtube an awesome place!

@NSC-Modz

2 жыл бұрын

Thats true, you always welcome and dont forget to Subscribe ;)

Oh this is great! Thanks to this video, it just happened that i bought that programmer today and looking for some info., and i found your video. It really helps a lot. Indeed. Thank you

@NSC-Modz

5 жыл бұрын

You welcome my friend

Thank you so much! The flipping of the pin #1 location, with the different program versions, was exactly my problem!

@NSC-Modz

5 жыл бұрын

You welcome :)

Even though you posted this several years ago, it is still a huge help to us who are having troubles with BIOS (in my case, on a LattePanda Alpha - the flash to the new BIOS went badly and I bricked the device). My biggest issue was getting the menu system in my CH341A in English - and YOU solved it!! Many thanks - was pulling my hair out. cheers

@NSC-Modz

4 жыл бұрын

You welcome ;)

Thankyou so much for your video and link for the drivers. Worked perfectly.

@NSC-Modz

2 жыл бұрын

You alleys welcome

Nice guide man really helped me out after bricking the bios chip. Thanks alot for your effort putting in

@NSC-Modz

4 жыл бұрын

You welcome :)

Thank you! Finally someone with a common sense approach. Helped me out heaps... Appreciate the download links as well. :-)

@NSC-Modz

6 жыл бұрын

Nice Comment, Thank you to and you always welcome.

Thank your for sharing!

@NSC-Modz

4 ай бұрын

You always welcome

This device has 2 operation modes. The mode selection is based on the jumper placement. Jumper pin 1 & pin 2 -> programming mode. As you well described. Jumper pin 2 & pin 3 -> serial TTL mode. We can directly connect pin TXD, RXD, and pin GND (3 wires) to a serial port of another device.

@NSC-Modz

2 жыл бұрын

That's right, you got it to the point :)

thank you . i needed to flash the bios on some locked chrome boxes and could not find a driver for the ch341a that worked , yours did

@NSC-Modz

Жыл бұрын

Thank you very much, you always welcome :)

when I did my video on bios chip replacement I could not find videos like yours and my main rig was down with a corrupted bios. thanks so much for your efforts

Thank You for taking the time and explaining!! wish you all the best!

Thank you for your time an effort, a great detailed explanation and providing the files for download.

@NSC-Modz

Жыл бұрын

You always welcome, wish you the best.

very clear demonstration/explanation.

Thank you for your detailed explanation. Helped me recover my motherboard without going to rma or some stuff. EFI issues kept it from booting. vielen dank.

@NSC-Modz

5 жыл бұрын

No problem (:

*i see a lot of videos trying to see why the program cant see my programmer conected, and only was for the jumper position haha thank u very much u save my life :D*

Excellent video. I really appreciate your help and guidance. This is the best video ever about this device. Keep up the great work

@NSC-Modz

5 жыл бұрын

Thank you very much, you welcome :)

You are a Gladiator >>> Thanks !!!!

Thank you so much, so are a heroe. Thanks for sharing the drivers files.

@NSC-Modz

7 ай бұрын

You always welcome 😉

and thanks for all your works too ... drivers,program,chip connection fix,jumper state ....etc ----- GOOOD JOB

@NSC-Modz

4 жыл бұрын

Thank you to ;)

good job explaining bro ! much appreciated. Thumbs up for your video.

@NSC-Modz

Жыл бұрын

You very welcome

amazing.the best video ever for ch341a programmer.thanks.

@NSC-Modz

Жыл бұрын

You always welcome

thank you for this tutorial, i have just bought one of these and your video will help me get it working properly. 'thumbs up'

I don't understand English well, but with you I understood ... I subscribed to your channel...thank you 💐

Thank you for your effort specially for speaking english

@NSC-Modz

5 жыл бұрын

Thank you to and you always welcome

Thanks for this video, and the effort to record it in English too. It made a bunch of stuff clearer for me 👍

@NSC-Modz

2 жыл бұрын

You always welcome, thank you very much.

Very good video on details of this programmer, thank you.

Thank you very much for recording this, was extremely informative and covers all the Gotcha's that someone would run in to.

@NSC-Modz

8 жыл бұрын

Thank you very much dude :)

God bless you, excellent vid, subscriber earned!

@NSC-Modz

3 жыл бұрын

Thank you sooo much ;)

Good Job. thank you for sharing ur ideas :)

@NSC-Modz

Жыл бұрын

You welcome

Hey thanks for the content i just instelled and copy my chip and it worked straight away!☺

@NSC-Modz

5 жыл бұрын

That's good to know, you always welcome :)

Thank you, Its worked

@NSC-Modz

7 ай бұрын

You always welcome

hey man thank u so much for the video every informative i like it so detail thumbs up for you men

@NSC-Modz

Жыл бұрын

Thank you so much, you always welcome

super geiles Tutorial. Daumen lang und hoch ;)

@NSC-Modz

Жыл бұрын

Vielen lieben Dank 🥰

Very helpful, thanks !

Thank you, my computers bios got corrupted and I'm going to buy this tool to fix it, you showed me everything I have to do and made the drivers very easy to find, thank you.

@NSC-Modz

4 жыл бұрын

You welcome :)

Excellent presentation. Problem solved accoring to jumper positioning. Also the folder (links provided) is virus free and clean. Cudos and best regards brother.

@NSC-Modz

2 жыл бұрын

Thank you so much, all the best to you to ✌️

this guys knows whats he's talking about just got mine working CHEERS!

@NSC-Modz

Жыл бұрын

You welcome bro.

Very detailed video !! Now i can fix my broken bios, thanks!

@NSC-Modz

4 жыл бұрын

You welcome :)

i think the distributers had seen your helping video and put the jumper in the right place per default now - thanks a lot for your good work

@NSC-Modz

4 жыл бұрын

Thank you to and you always welcome :)

Thanks your video saved my bios chip. $5 programmer well worth it.

@NSC-Modz

4 жыл бұрын

Oh yes :)

*Nicely explained ,Thank you* 👍👍👍👍

@NSC-Modz

2 жыл бұрын

Thank you very much to 😊

@armandine2

2 жыл бұрын

10 minutes on placing the jumper - you're a glutton for punishment

Excellent, thank you, various web sites were saying to leave the jumper as default, but by moving it, as you said, worked great -

@NSC-Modz

6 ай бұрын

You always welcome :)

This jump really worked! Cheers mate for the tip very helpfull!

@NSC-Modz

4 жыл бұрын

You welcome :)

Thank you, useful video and file. Started on win 10, no problem.

@NSC-Modz

Жыл бұрын

Great, you always welcome

Can i get a link to the original source of the download ? Thanks !

Thank you Sir ! Very useful info.

Cool gemacht! Thanks For Description

Thank you so much !! ILOVE YOU !!!!

@NSC-Modz

2 жыл бұрын

Big love 2u2 :)

Bonjour, j'ai installé les pilotes et le logiciel c'est super, merci

hi, i want to ask, i just bought mini programmer, but when i input into usb laptop there is no reaction to ask for any driver, so i installed still can not, can help me

Black edition worked perfect on the Lenovo Thinkpad T570.. Btw I used the a socket adaptor so yeah thanks for the video, you saved me £60!

@NSC-Modz

4 жыл бұрын

You Welcome ;)

Awesome. The main point is ))) We got the package !!! And a simple useful guide !!! Video from 2016 !!!

@NSC-Modz

Жыл бұрын

You always welcome

ty for all your info...

@NSC-Modz

9 ай бұрын

You welcome

Thank you for sharing your work, great video!

Very nice video and very very helpful showing the problems between versions of software...

@NSC-Modz

5 жыл бұрын

Thank you very much, i just try my best :) you welcome

1. Position of the Tab: It is written on the circuit board. 1-2 for programming and 2-3 for TTL. Unfortunately written in Chinese 2. The Up or Down connection: It is also shown in the circuit board. Top is for 25 and down is for 24. For most bios, it is 25 chip and one must select 25 SPI Flash in the software.

@NSC-Modz

6 жыл бұрын

Great Info THX

Really helpfully video

@NSC-Modz

Жыл бұрын

Thank you so much, you always welcome 😀

haha you talked few minutes about the jumper... however very detailed and useful video. Thank you so much.

On the opposite side of chip locking lever there is a drawing on PCB how the memory chip should be installed :) . If you'd rotate the socket by 180deg so the locking lever would be pointing at usb connector then the image in first software would be right too. Thanks for info about the jumper 👍 This is just my guessing: The software was designed probably for hardware that have the socket rotated (maybe predecessor of EZ2019 (ezp?) or 2010), but when "cloners" show up and copied the hardware they rotated the socket how it's now (because it's more user friendly, and they can't copy 1=1 board layout either because: maybe of legal implications or the board was just too big and cost too much ;) ) but they still used the original software ...

@NSC-Modz

4 жыл бұрын

Thanks The Software was for an other USB Programmer ^^

Your English is fking awesome, man.

This is the most common issue with the CH341a Black (JUMPER IN THE WRONG POSITION)

@NSC-Modz

Жыл бұрын

Yep

nice one …. thanks for the lesson and keep the video's coming

@NSC-Modz

4 жыл бұрын

Yeah, you very welcome :)

Danke!!! Das hat mich gerettet. Ich hab schon 2 Stunden rum probiert. Aber ich hatte auch das falsche Programm. Der Jumper war bei mir komischerweise schon richtig gesteckt, allerdings hatte ich trotzdem erstmal Probleme den richtigen Treiber zu finden. Und durch das falsche Progamm hatte ich auch die Anzeige falsch rum für das Steckmodul... Danach ging es ohne Probleme. Danke!

@NSC-Modz

3 жыл бұрын

Gerne, bist immer Willkommen

moin, kannst mir bitte mal sagen: hab das ding jetzt schon 2x bei amazon besorgt, aber das rote licht geht einfach immer nach 1-2 sekunden aus wenn ich es an USB anschließe, dann kommt auch device not detected, hast du da deine idee vielen dank

@NSC-Modz

2 жыл бұрын

Hi Wenn das Licht schwach oder aus geht ist der jumper falsch eingesteckt oder der BIOS Chip falsch rum gesteckt oder gelötet. Mfg

@pascals5408

2 жыл бұрын

Stecks mal in nen blauen oder roten usb port und installie die treiber kzread.info/dash/bejne/fmR3yruHp9jUhag.html

Excellent

@NSC-Modz

2 жыл бұрын

Thank you so much

Ultransc ur the best and nice intro and outro man iam a huge fan of your videos and great work keep it up

@NSC-Modz

8 жыл бұрын

+Ahmad Shablaq Thank you very much, i respect it much :)

Thanks to you for this wonderful videos sir!

thanks 🤩🤩🤩

@NSC-Modz

Жыл бұрын

You welcome 😀

Thanks a lot guy

@NSC-Modz

Жыл бұрын

You always welcome

Good video (a little bit long, but it's better, because you described slowly), I used it for my recovery and flashing device. Lot of important informations. Thank you.

I should say the best video made for users like us even though it is 3 years old. A big thanks to you.

@NSC-Modz

5 жыл бұрын

Yes, i just try my best :)

good video thanks

@NSC-Modz

Жыл бұрын

Thank you much to.

Many Thanks

@NSC-Modz

2 жыл бұрын

You always welcome

Ich danke Dir für das tolle Video. Habe mir genau den gleichen Programmer direkt aus China bestellt und da war keinerlei Software dabei. Und ich glaube ich hätte mir nun auch den Wolf gesucht wegen dem Jumper Problem. Dein Englisch ist gut, konnte auch alles verstehen. Hat mir nun viel Zeit gespart und hast alles toll erklärt, hab nun auch das neue BIOS schon draufgeflasht. 1A Video !!!

@NSC-Modz

3 жыл бұрын

Vielen lieben dann, schätze dein Kommentar sehr :)

I have problems with the software packages. The driver seems to install OK (with driver--24CXX25Xx.exe), but when starting ch341a.exe (v1.18), I first get 'Access violation at address 00000000..." and then I see the software interface, it always says Connected, with or without controller. It doesn't find any chip and the Exit button again show the Access violation error. Not able to exit. Ihave this on Win7 and Win10. Also my antivirus Norton erased a file from the 64b package because it contains a virus (WS.Reputation.1)! In files usbiox.dll and drvsetup64.exe

Hi there Great channel.

@ES-iv6wb

Жыл бұрын

I wanted to flash bios of XW9300 workstation. Have you dabbled with these at all?

@NSC-Modz

Жыл бұрын

Thank you so much, you always welcome. No, never, but i can take a look. Tell me more about the system

Danke du hast Memmet weitergeholfen

@NSC-Modz

Жыл бұрын

Kein problem

Great job m8. Thanks for info and for the files provided. Very helpful. Thanks again. One thing i've noticed is that the soldering joints of this device is purely made. I will use my soldering iron and resolder the bad connections to make proper and acceptable soldering joints just in case so it can be more reliable to the task.

@NSC-Modz

7 жыл бұрын

Thx to u 2 mate ;)

Thank you for the tutorial. I ordered one too. Do you know if it can read/write Atmel 25128an chips? I couldn't find any info on that online.

Thank You

@NSC-Modz

2 жыл бұрын

you always welcome

thank you

@NSC-Modz

2 жыл бұрын

you always welcome :)

Have you tried to open that PDF file named "24xxx_usb_manual" just under the folder "Languages" to see what instructions does it have?

Lifesaver!!! Thank you!

@NSC-Modz

3 жыл бұрын

You welcome :)

September 2023, work on asrock fm2a68m-dg3+ you save my mobo thanks man

@NSC-Modz

10 ай бұрын

You always welcome

Don't worry about your English it's fine.

@NSC-Modz

Жыл бұрын

Thank you much

thank you for the details !!! I will let you know if this reprogrammer works to reset mileage on a replacement car digital odometer.

Well done, very instructive.........

i missed your voice brother :-)

@NSC-Modz

5 жыл бұрын

Nice man, you welcome :)

pity you did.t actually show how to install the drivers - otherwise just hard work to follow

@NSC-Modz

2 жыл бұрын

You welcome

@armandine2

2 жыл бұрын

@@NSC-Modz not just me - half a million others!

@NSC-Modz

2 жыл бұрын

@@armandine2 yes, thats true :)

Greetings UltraNSC! First of all thank you for your time and effort in making this video, really appreciated. May i ask you sir, does this USB programmer has the pins where i can solder or use bios chips of LGA 2011v3 x99 motherboards like for example MSI X99A Gaming 7 USB 3.1 ? Because i see in the video you where using a bigger bios chip. Thank you very much

@NSC-Modz

8 жыл бұрын

Thank you very much... Yes, there is also a small PCB included, where you also can Solder those Chips, maybe ill do a Video about soon...

Thanks for the video ! is the drivers still working on a recent machine ? i can see it's a 2011 programm

Hello, I am pretty sure that I am doing every thing correct, but I can not "detect" any BIOS Chip. It always show me the "unknown"... Programming doesnt work, obviously... What I am doing wrong? Any help?

keep it up bro !

Hi, thanks for the video, sadly I'm struggling to reflash my bios chip. Programmer seems to find the controller ok but when I read the chip it shows unknown and ?? in the fields. Any ideas whats wrong? Thanks

Thanks for this, ive been messing with this programmer board for a while and even though my chip is detected from motherboard because i'm using the clip. I don't see any green light flashing when it's flashing the firmware nor reading.. It's just another red light that turns on.