Installing Brembo Big Brake Kit on Supercharged BRZ | DIY Brake Upgrade

Автокөліктер мен көлік құралдары

In this video, I tackle the challenge of upgrading the brakes on my BRZ with a Brembo big brake kit. With the BRZ being such a popular platform, finding the right brake upgrade was crucial. After experiencing issues with dust boots affecting brake longevity on the stock brakes, I opted for Brembo. Their solution offers larger rotors and pads for enhanced braking performance, replaceable dust boots for durability in all seasons, and let's not forget, it looks absolutely awesome on the car! Join me as I walk through the installation process step-by-step and share my insights on why this upgrade is perfect for the cost-minded BRZ enthusiast. Don't forget to like, subscribe, and hit the bell for more DIY automotive content! 🚗💨
Key Points:
- Upgrading brakes on the BRZ with Brembo big brake kit.
- Addressing challenges with dust boots and brake longevity.
- Unboxing of the CTSV Brake Swap Kit for 5x100 Subaru's
- Step-by-step installation guide and insights.
- Subscribe for more DIY automotive content! 🛠️
Chapters:
0:00 Intro
1:59 CTSV Brake Swap Kit Unboxing
2:45 OEM Brake Disassembly
4:20 Cadillac ATS Brake Kit Install
10:00 Hawk ER-1 Racing Pad Install
12:49 Cost Breakdown & Closing Overview
#BRZMods #DIYBrakes #BremboBrakes #SubaruBRZ #CarUpgrade #AutomotiveDIY #CarEnthusiast #PerformanceBrakes #BigBrakeKit #BrakeUpgrade

Пікірлер: 17

  • @ThexGreatxLTS
    @ThexGreatxLTS7 күн бұрын

    Looking forward to a comparison video!

  • @Dmochkin
    @Dmochkin7 күн бұрын

    Let's goooooo

  • @digiovanniracing
    @digiovanniracing7 күн бұрын

    The pistons been listening to Echoes of Silence

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    BABY PLEASSEEEEE, WOULD YOU END YOUR NIGHT WITH MEEEE

  • @Pearlwhitez28l69
    @Pearlwhitez28l697 күн бұрын

    Bought this same kit and waiting for the parts to come in from the US. Taking forever. Stock brakes were at 400 degrees C at TMP and I don’t have any power adders.

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    400 degrees is actually not too high, I feel like even some aggressive pads on stock setup can get up to 600-800. Just remember, the very first 1:19.7 to ever be set by a naturally aspirated FR-S on a Tomei EL and simple OFT tune was running OEM calipers with just Project Mu Club Racer pads. I personally didn't even think about a brake upgrade until I went with a super charger.

  • @ARHAMALVI
    @ARHAMALVI7 күн бұрын

    looks good 🔥

  • @carlozaappaa5427
    @carlozaappaa542713 сағат бұрын

    Did rears need an upgrade too or they are fine with this set up?

  • @jacksonzhong9298
    @jacksonzhong92987 күн бұрын

    Please do a review on the ER-1

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    Absolutely going to do an ER-1 review - so far, so good, they're exactly as JRP told me they were - medium bite, good modulation, and a solid long lasting endurance pad, ER-1 Review in upcoming videos. I have data showing peak 1.45G braking and consistent brake application lap over lap from Aim data. I personally recommend them.

  • @digiovanniracing
    @digiovanniracing7 күн бұрын

    L.A. NOIRE MOMENT

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    THE URGE TO FLICK A CIGARETTE AND TELL SHORTY 'BEAT IT, TOOTS' WHILE LISTENING TO LA NOIRE SAX ON REPEAT

  • @cgmiller82
    @cgmiller827 күн бұрын

    What are you running on the rear of the car?

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    At the moment Carbotech XP12!

  • @digiovanniracing
    @digiovanniracing7 күн бұрын

    5:24 me and who?

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    bruh LOOOL

  • @bsquaredmotorsports

    @bsquaredmotorsports

    7 күн бұрын

    me n the shorty I pulled by being a silly little guy

Келесі