Haven helping you to show your home some love! How to easily install a Kwikset Powerbolt 2 electronic lock.
Жүктеу.....
Пікірлер: 83
@kimberley48832 жыл бұрын
3 yrs of providing invaluable help!! Thank You!!
@rango_unchained4 жыл бұрын
I don't understand how this vid has 15 dislikes? I followed your instructions and my new Kwikset Powerbolt 2 works perfectly. Thank you!
@jetdeco
4 жыл бұрын
Ron Butler You’re very welcome!!!
@marierios1929
3 жыл бұрын
They are probably mad a woman is teaching them something. 😆 I am a handy woman. I paint, hang drywall ,etc. Men on the job always look at me funny.
@thediaryofdove
Жыл бұрын
My 3 screws didn’t go in, for the lock side
@Bouzsi3 жыл бұрын
Great video! I was a little worried I’d gotten in over my head, as I’m not a “handy person”... but you made this a super easy project. Thanks!
@rogersschool563 жыл бұрын
Your video made so much sense and saved me a lot of time with the terrible directions. It was so easy to install. Thanks for posting this and it was from a woman so I really felt like I could do it after watching you.
@jetdeco
3 жыл бұрын
Rogers School this made my day! Thank you very much. You’ve absolutely got this!!
@jillkidd603 жыл бұрын
Thank you so much for your instructions. I always get antsy about installing something especially a door lock. You made it so easy for me. I appreciate it!
@jetdeco
3 жыл бұрын
Jill K love to hear that it was helpful!
@brandonevans334 жыл бұрын
I really appreciate you doing this video. No longer intimidated to do this project thank you!!
@jetdeco
4 жыл бұрын
Brandon Evans You’re very welcome!
@Hank760
3 жыл бұрын
Did it work for you or was your hole too small for the deadbolt to fit?
@amandachristiansen4663 жыл бұрын
Wow, you are great at explaining and the camera man was on point! Thank you very much!
@luzmabassi63003 жыл бұрын
Thank you so much for amazing instructions. I almost return my lock when I found out how difficult The instructions shown. With your instructions I did it right away. you thank you so much
@jetdeco
3 жыл бұрын
Love it!!
@ElyssaM98992 жыл бұрын
Perfect video, clear instructions. Great filming
@chase29102 жыл бұрын
This video was excellent, the only mistake i made was not paying attention to "don't over tighten", otherwise i would've been done in 5 min like the video Great job, ill share this on my Amazon product review
@HeatherAyers14 жыл бұрын
THANK YOU so much! This was a great tutorial, and it took me probably 20 min to install (with a hand tool, rather than a power driver) - haven't programmed yet 'cause I need to go get batteries (that will probably take longer than the install!)
@jetdeco
4 жыл бұрын
Heather Ayers-Flood you’re very welcome!!
@chillios22224 жыл бұрын
you made it look easy for sure, best thing i ever did was get a keyless lock! no worrying about keys!
@jetdeco
4 жыл бұрын
Roger Childs Agreed! Not having to worry about keys is phenomenal!
@truck57us2 жыл бұрын
Very helpful. Thank you!
@alext16924 жыл бұрын
Outstanding video saved hours of reading the Dagon instructions. Which I hate. Thanks 🙏🏽
@coreamusic4 жыл бұрын
Exelent haven. You're good teacher Cleanly,simple. Nice voice. 😎
@jsewell53413 жыл бұрын
Thanks for the help! Great video!
@MrDonmelasa2 жыл бұрын
Thanks you very much for your time It was very nice easy and simple
@halloweenstore4 жыл бұрын
simple & easy instructions for DIY'ers !!
@julesjames5934 жыл бұрын
Using this vid to teach my kid to install. Thank you!
@jetdeco
4 жыл бұрын
Jules James love it!
@julesjames593
4 жыл бұрын
@@jetdeco "Watch this three times. Billable minutes." Paying the kid to learn the trades is my best parenting tip ever.
@melissagoodwin80555 жыл бұрын
Great step by step instructions!
@jetdeco
5 жыл бұрын
Melissa Goodwin Thank you! We truly appreciate you!
@handymandivisionllc5303 жыл бұрын
Thank you best video on this
@israelbarron59034 жыл бұрын
Thanks, watched and paused your video as I installed mine. Make it pretty simple. Took me a bit to remove/change the default code, but eventually got it, but thats on me.
@rahuldgpatel3 жыл бұрын
1.Good instructions for installing the lock. 2. Programming the lock, please watch the video done by Kwikset. Danger: If you leave Master Code as default 0000 you are risking that anyone can open this lock. Again follow the instructions that came with the lock. First clear all the program codes and then change the master code. Write it down on the instructions paper and save at safe and secured location. Good luck. @Haven please update the programming part of the video. Thank you.
@flipsgalore56013 жыл бұрын
Excellent video truly excellent very well explained
@Jordan-so1hj4 жыл бұрын
Very detailed information 👌
@mazemaze26443 жыл бұрын
Thank you. Great video 👍🏽
@victorallen30493 жыл бұрын
Great video it was a big help
@teersg3273 жыл бұрын
Awesome job explaining step by as you do it! I feel like I could do this myself! Great video!
@otonieldabeast2 жыл бұрын
Súper helpful. Thank you so much
@Bendoverz343 жыл бұрын
The passcode one isn’t working and I’m doing it step by step
@Hank7603 жыл бұрын
I wish I had been prepared for my deadbolt hole on the side of my door to not be wide enough! I was so excited to do with and I couldn’t even put it in my door
@SouthernTee714 жыл бұрын
Perfect instructions.
@jetdeco
4 жыл бұрын
Tonya Gordon Thank You!
@d.rogers41844 жыл бұрын
Thanks buddy! Any advice on how to install the rest, like the doorknoib?
@vinvin10824 жыл бұрын
You’re good! Thank you
@jfdez812 жыл бұрын
It works thank you
@beardedirishman6703 жыл бұрын
Thank you for the help
@jetdeco
3 жыл бұрын
You’re very welcome!
@beardedirishman670
3 жыл бұрын
@@jetdeco i have a question 1234 works but can't get it personalized
@beautifullyblessedbygod7404 жыл бұрын
Thank you💜
@jacarajohnson29873 жыл бұрын
Thank you so much!!
@JoeSteinerIII4 жыл бұрын
Your amazing! I was intimidated by this project and your calm and straightforward attitude made this project kinda fun 🎉 thanks!
@treygriffin6318
3 жыл бұрын
Seriously like frfr me too 🤣🤣🤣👍
@thehappycathotel43853 жыл бұрын
@Haven, how do we get the bolt to program the other way? We have the same side swinging door as your video and started with the bolt in and the knob to the right but when we 0000 Lock 0 Lock, it beeps 3 times.
@marlenneramirez7623 жыл бұрын
So did you use the black door frame it comes with ? Or left the one you already had ?
@andydrummerobrien2273 жыл бұрын
That was good I can’t get mine to program
@freddybastiat82993 жыл бұрын
best.video.ever
@Hunter-ef4ch Жыл бұрын
For some reason, when I screw in the back screws, the faceplate in the front comes forward cricked
@vicangel24713 жыл бұрын
Hi Install a digital deadbolt. The digital works but the key does not turn and removes the pin. Why is that? Thank you
@sharesejackson94033 жыл бұрын
Thank Thanks Girl
@a.rod8762 жыл бұрын
I cant get mine to turn 😩 after i put the master default ,
@murugan24022 жыл бұрын
will this work with wifi? / alexa?
@zebrabeachgirl1153 жыл бұрын
do you have to have the key in the door if you want to use the numbers to open the door?
@jetdeco
3 жыл бұрын
Nope! No key required once you program the code 🙂
@zebrabeachgirl115
3 жыл бұрын
@@jetdeco awesome thank you
@jenerlan
3 жыл бұрын
When I tried to install mine. The volt don’t fit in the hole when we tried to lock it. But our old lock is the same size and fit as this lock.
@jetdeco
3 жыл бұрын
@@jenerlan that happens sometimes. You may have to drill out or chisel out the bolt hole so that the bolt can throw/extended fully
@jenerlan
3 жыл бұрын
@@jetdeco thank you so much. Your video was the most helpful 🤙🏽.
@TheOneWithTheAccent4 жыл бұрын
How do you get it so you wont have to use 1234 as a mc? Im lost.
@drugmoney1369
4 жыл бұрын
That had my wife and me stuck too. That's when we had to turn to the instructions it came with.
@TheOneWithTheAccent
4 жыл бұрын
@@drugmoney1369 sadly the instructions are lost forever
@richardcanales2383 жыл бұрын
I’m stupid I can’t program the lock
@Bendoverz343 жыл бұрын
The one inside won’t FUCKING go on!! It’s annoying. None of the screws fit and it’s not going on completely Edit: They finally work! The good thing was bent the first time cuz it was too tight, so I took it out and put it back in
@2815Juan3 жыл бұрын
I hope you erased the factory code to open the lock. I’m a locksmith. And I’ve opened many of these locks at homes because no one erased the factory setting.
@mrgallardo7069 Жыл бұрын
Worst lock ever . Returned it twice followed directions step by step and doesn't do as I read in Manuel or video . Also reset it a few times . I would not recommend this lock
@Pittsburgh-ke8yt2 жыл бұрын
It’s plastic junk don’t waste your money. And it doesn’t come with the 4 double A batteries you need
@rex789rex3 жыл бұрын
This lock is junk don’t waste money. Once battery runs out u are screwed, the 9 V battery option is junk never works… many reviews online pointing this out.
Пікірлер: 83
3 yrs of providing invaluable help!! Thank You!!
I don't understand how this vid has 15 dislikes? I followed your instructions and my new Kwikset Powerbolt 2 works perfectly. Thank you!
@jetdeco
4 жыл бұрын
Ron Butler You’re very welcome!!!
@marierios1929
3 жыл бұрын
They are probably mad a woman is teaching them something. 😆 I am a handy woman. I paint, hang drywall ,etc. Men on the job always look at me funny.
@thediaryofdove
Жыл бұрын
My 3 screws didn’t go in, for the lock side
Great video! I was a little worried I’d gotten in over my head, as I’m not a “handy person”... but you made this a super easy project. Thanks!
Your video made so much sense and saved me a lot of time with the terrible directions. It was so easy to install. Thanks for posting this and it was from a woman so I really felt like I could do it after watching you.
@jetdeco
3 жыл бұрын
Rogers School this made my day! Thank you very much. You’ve absolutely got this!!
Thank you so much for your instructions. I always get antsy about installing something especially a door lock. You made it so easy for me. I appreciate it!
@jetdeco
3 жыл бұрын
Jill K love to hear that it was helpful!
I really appreciate you doing this video. No longer intimidated to do this project thank you!!
@jetdeco
4 жыл бұрын
Brandon Evans You’re very welcome!
@Hank760
3 жыл бұрын
Did it work for you or was your hole too small for the deadbolt to fit?
Wow, you are great at explaining and the camera man was on point! Thank you very much!
Thank you so much for amazing instructions. I almost return my lock when I found out how difficult The instructions shown. With your instructions I did it right away. you thank you so much
@jetdeco
3 жыл бұрын
Love it!!
Perfect video, clear instructions. Great filming
This video was excellent, the only mistake i made was not paying attention to "don't over tighten", otherwise i would've been done in 5 min like the video Great job, ill share this on my Amazon product review
THANK YOU so much! This was a great tutorial, and it took me probably 20 min to install (with a hand tool, rather than a power driver) - haven't programmed yet 'cause I need to go get batteries (that will probably take longer than the install!)
@jetdeco
4 жыл бұрын
Heather Ayers-Flood you’re very welcome!!
you made it look easy for sure, best thing i ever did was get a keyless lock! no worrying about keys!
@jetdeco
4 жыл бұрын
Roger Childs Agreed! Not having to worry about keys is phenomenal!
Very helpful. Thank you!
Outstanding video saved hours of reading the Dagon instructions. Which I hate. Thanks 🙏🏽
Exelent haven. You're good teacher Cleanly,simple. Nice voice. 😎
Thanks for the help! Great video!
Thanks you very much for your time It was very nice easy and simple
simple & easy instructions for DIY'ers !!
Using this vid to teach my kid to install. Thank you!
@jetdeco
4 жыл бұрын
Jules James love it!
@julesjames593
4 жыл бұрын
@@jetdeco "Watch this three times. Billable minutes." Paying the kid to learn the trades is my best parenting tip ever.
Great step by step instructions!
@jetdeco
5 жыл бұрын
Melissa Goodwin Thank you! We truly appreciate you!
Thank you best video on this
Thanks, watched and paused your video as I installed mine. Make it pretty simple. Took me a bit to remove/change the default code, but eventually got it, but thats on me.
1.Good instructions for installing the lock. 2. Programming the lock, please watch the video done by Kwikset. Danger: If you leave Master Code as default 0000 you are risking that anyone can open this lock. Again follow the instructions that came with the lock. First clear all the program codes and then change the master code. Write it down on the instructions paper and save at safe and secured location. Good luck. @Haven please update the programming part of the video. Thank you.
Excellent video truly excellent very well explained
Very detailed information 👌
Thank you. Great video 👍🏽
Great video it was a big help
Awesome job explaining step by as you do it! I feel like I could do this myself! Great video!
Súper helpful. Thank you so much
The passcode one isn’t working and I’m doing it step by step
I wish I had been prepared for my deadbolt hole on the side of my door to not be wide enough! I was so excited to do with and I couldn’t even put it in my door
Perfect instructions.
@jetdeco
4 жыл бұрын
Tonya Gordon Thank You!
Thanks buddy! Any advice on how to install the rest, like the doorknoib?
You’re good! Thank you
It works thank you
Thank you for the help
@jetdeco
3 жыл бұрын
You’re very welcome!
@beardedirishman670
3 жыл бұрын
@@jetdeco i have a question 1234 works but can't get it personalized
Thank you💜
Thank you so much!!
Your amazing! I was intimidated by this project and your calm and straightforward attitude made this project kinda fun 🎉 thanks!
@treygriffin6318
3 жыл бұрын
Seriously like frfr me too 🤣🤣🤣👍
@Haven, how do we get the bolt to program the other way? We have the same side swinging door as your video and started with the bolt in and the knob to the right but when we 0000 Lock 0 Lock, it beeps 3 times.
So did you use the black door frame it comes with ? Or left the one you already had ?
That was good I can’t get mine to program
best.video.ever
For some reason, when I screw in the back screws, the faceplate in the front comes forward cricked
Hi Install a digital deadbolt. The digital works but the key does not turn and removes the pin. Why is that? Thank you
Thank Thanks Girl
I cant get mine to turn 😩 after i put the master default ,
will this work with wifi? / alexa?
do you have to have the key in the door if you want to use the numbers to open the door?
@jetdeco
3 жыл бұрын
Nope! No key required once you program the code 🙂
@zebrabeachgirl115
3 жыл бұрын
@@jetdeco awesome thank you
@jenerlan
3 жыл бұрын
When I tried to install mine. The volt don’t fit in the hole when we tried to lock it. But our old lock is the same size and fit as this lock.
@jetdeco
3 жыл бұрын
@@jenerlan that happens sometimes. You may have to drill out or chisel out the bolt hole so that the bolt can throw/extended fully
@jenerlan
3 жыл бұрын
@@jetdeco thank you so much. Your video was the most helpful 🤙🏽.
How do you get it so you wont have to use 1234 as a mc? Im lost.
@drugmoney1369
4 жыл бұрын
That had my wife and me stuck too. That's when we had to turn to the instructions it came with.
@TheOneWithTheAccent
4 жыл бұрын
@@drugmoney1369 sadly the instructions are lost forever
I’m stupid I can’t program the lock
The one inside won’t FUCKING go on!! It’s annoying. None of the screws fit and it’s not going on completely Edit: They finally work! The good thing was bent the first time cuz it was too tight, so I took it out and put it back in
I hope you erased the factory code to open the lock. I’m a locksmith. And I’ve opened many of these locks at homes because no one erased the factory setting.
Worst lock ever . Returned it twice followed directions step by step and doesn't do as I read in Manuel or video . Also reset it a few times . I would not recommend this lock
It’s plastic junk don’t waste your money. And it doesn’t come with the 4 double A batteries you need
This lock is junk don’t waste money. Once battery runs out u are screwed, the 9 V battery option is junk never works… many reviews online pointing this out.
@alexponce3063
2 жыл бұрын
U simply put 4 more AA battery 🤦🏻♂️ smh