Excellent video! I've been a diesel technician for over 20 years and have used many of these methods but there were a couple in there that were new to me. I would say I can't wait to try out these new methods but generally whenever you have to extract its not a fun time lol.

@ultimatehandyman

2 жыл бұрын

Yeah, it's never fun when you have to do this! Best of luck with them 👍

Well, that was comprehensive. No mucking about. Grand! Thank you!

The best part is when no one tells you it's a reverse thread, and you've been tightening it to all hell the whole time

@ultimatehandyman

6 жыл бұрын

Thankfully left handed threads are pretty rare on bolts! Thanks for the comment

@nicparker3809

5 жыл бұрын

LOL

@coulssp

5 жыл бұрын

Like the RR circa 80s lugnuts

@christopherfitch7705

5 жыл бұрын

Propane uses reverse threads in usa

@ronanlough3868

5 жыл бұрын

Reverse tread is usaly indicated by notches

Very well thought out and presented. Should be made available to all mechanical trades students as soon as possible in their courses by the instructors.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment ;-)

Fantastic! I watched this video several weeks ago... I thought I would never need to use any of these methods but ended up getting a second hand garden shredder and having to remove 4 hex M8 countersunk bolts. I used the center punch and hammer method. Thank you for great educational content!

@ultimatehandyman

3 жыл бұрын

Glad it helped! Thanks for the comment 👍

Thank you for your time and consideration Mr Ultimate. I have learned from your demonstrations.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

I know this is two years old, but I had a hex head bolts with soft metal that stripped on me in a hard place to get a drill to use an easy out or drill it out. As a last gasp chance I tried an Allen key that I had laying around in my work shed and tapped it in with a hammer and a dang thing worked!!!! It was an important electrical component to help my 2016 Jeep engine run. Thank goodness for KZread videos like this!!!! 👍🏻🙏🏻

@ultimatehandyman

4 жыл бұрын

Thanks for the comment ;-)

Great tips, as well as those from the audience. My tip, particularly for those irritating pan hex heads, is to dremel a slot across the bolt head, then use a flat head screwdriver to remove the bolt.

All great examples and not some crappy DIYer trying to explain things... subscribed

@ultimatehandyman

6 жыл бұрын

Thanks for the comment and the sub ;-)

Excellent video, I used to be a mechanic and this really hits home. Often a torch saved my day but as you said sometimes it cant be used. We have better screw extraction tools today than when I was swingin wrenches.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment 👍🏼

Hammer and chisel technique was very effective in rotating a cap head and backing the bolt out enough to get a grip with my fingers. Thanks for covering so many scenarios.

@ultimatehandyman

5 жыл бұрын

You are welcome Thanks for the comment

Fantastic tips, fantastic video and sound quality !

@ultimatehandyman

3 жыл бұрын

Glad it was helpful! Thanks for the comment 👍

I beat a Torques bit into the stripped hole. Then use an impact driver. That works too!!! Keep Rocking!!!

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@conrads.5086

6 жыл бұрын

I do that too, works great!

@beachuk2000

6 жыл бұрын

this is what i was going to add works a treat

@scottfirman

6 жыл бұрын

Rocker Pat I have done that, also used larger allen wrenchs,or metric and beat the damn thing on. Nice tight fit and shocks it ,all at the same time

@oscar300

6 жыл бұрын

what this buy said, or just pound a bigger allen key in.

Thank you for this. Now I can't wait to get home and try a few. Bought a used thickness planer, 6 allen head bolts on each blade, 3 on each side came out with some penetrating oil and elbow grease. There was surface rust on the machine, so I am assuming rusted inside. Makes it challenging because the blade head spins too, so holding it while you are trying these things is difficult. i've tried oil, heat, but ended up rounding 4 out of the 6 left. Waiting on extractor sets coming today to try again, but I think I'm gonna try shocking better (did do that some) and the punch idea after heating again. Maybe that will finally get them free so I can change the blades!!! Thanks again!

Useful video - I think a lot of us had to learn this stuff the hard way so it's nice to see it offered up like this. Will save a lot of people a lot of painful lessons!

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

Great video full of useful tips as always! In the past I've used a cutting disc to cut a slot in the head of the bolt and then used a flat headed screwdriver to remove the bolt (only works on certain situations)

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@freddyeltigre2327

3 жыл бұрын

"33 year millwright here"( The MillWrights Poem ) We the willing working for the unknowing and uncaring have done so much with so little for so long , we are now qualified to do anything with nothing ! Depending on where the hex head is on the machine or other impossible spot, I find you are using some pretty good methods. I have used every method you used in many , many cases, most work some you have to drill out ' using the size of the inner thread size as your last drill size. Use the desired tap to dress the thread. Remember by heating, you also temper the bolt , so it can't be drilled, you must decide what is more desirable .

Excellent video. I have used practically all of these techniques but a reminder is always a good thing. One other way I have found recently is with a cheap thin diamond wheel on a dremel type tool cut a slot into the bolt and use a hand impact wrench with a straight bit ...my first option in a lot of cases nowadays.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

Use a Dremel or grinder to cut a slot in the head then remove with a flat screwdriver. If that doesn't work I usually beat the thing to pieces with a sledgehammer and throw the whole mess in the trash

@ultimatehandyman

5 жыл бұрын

LOL Thanks for the comment

@jimbob036

5 жыл бұрын

You beat me to it! I don't know what I'd do without my Dremel. In extreme cases, sometimes I have cut a slot right down into a threaded post, to get that broken screw stub out...

@samsounggallaxy8321

5 жыл бұрын

😁👍

@roymichaeldeanable

5 жыл бұрын

I had a bolt stuck in my scooter front mudguard, so I cut a slot with the Dremel and finally got it to unscrew. It was a Phillips style head of some description, overtightened and corrosion issue...new bolt will be a hex head style...

@daleburrell6273

5 жыл бұрын

SOUNDS GOOD-!!!

A great collection of removal tips. Don't forget to use Never Seize compound when you replace the bolts. Over the years my maintenance regime was to never have the same problem again.

@ultimatehandyman

5 жыл бұрын

Thanks Keith, I always use copper grease at work when re-assembling anything. It makes it so much easier, the next time it needs taking apart. Thanks for the comment

Good clear voice and instructions. No silly annoying background music. Straight to the point. I'd like to have been your apprentice. Not much chance now... I'm 74 y.o. Best wishes from Wales. 😆😆

@ultimatehandyman

4 жыл бұрын

I'm glad you found the video useful. Thanks for the comment 👍

Fantastic stuff mate! I have been using the barbaric method of a dremal to cut a slot and then an impact flathead to remove everything that becomes stuck but this can easily damage the surrounding surfaces. Love the centre punch idea! Cheers from Australia

@ultimatehandyman

6 жыл бұрын

Thanks for the comment ;-)

My dad was a marine mechanic who worked for himself. He had something like a hand impact screwdriver. You'd put in the correct size bit, then you'd get a hammer and hit the other end. Worked great especially with some heat.

@ultimatehandyman

5 жыл бұрын

Impact screwdrivers are great 😉 Thanks for the comment

Great techniques and a good followup in the comments section too. Appreciate your efforts in providing good information and clear, realistic demonstrations.

@ultimatehandyman

5 жыл бұрын

I'm glad that you appreciate my efforts ;-) Thanks for the comment

Mole grips worked a treat, you just saved me a lot of bother with my motorbike, and getting to work on Tuesday. Top man.

@ultimatehandyman

2 жыл бұрын

I'm glad the video helped Thanks for the comment 👍

An interesting and well made video. Thank you.

@ultimatehandyman

5 жыл бұрын

You are welcome Thanks for the comment

I used to do Submarine Repair in the Navy. Dealing with stubborn or stuck fasteners was an every day occurrence. Before ever trying to use an Allen Key but after cleaning the bolt we always started with the Impact Driver. Just the simple Hammer Driven one. This would loosen or break free over 95% of the bolts.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@core4365

5 жыл бұрын

As I sit in my sub repair chair on shore duty, I watched this video lol. I will add though, the times we have stripped heads, a "sock out" or a tapered allen head just slightly bigger than the original hole is beneficial to these stripped allen head bolts. Hammer the sock out into the head, and use a socket or adjustable wrench on the end to loosen by hand.

@Ozninjaguy

5 жыл бұрын

@@core4365 I agree. I have ground down larger allen keys to do just what you said.

@LightGesture

4 жыл бұрын

My recessed head bolt broke 2 Alan keys and 2 hex head impact bits.... Even with heat applied and penetrant

@doctorboy5892

4 жыл бұрын

@@LightGesture that's when you drill it out and use a bolt extractor.

This was very helpful! I've been trying to remove a bolt from my industrial sewing machine for a week. Thanks so much!

@ultimatehandyman

8 ай бұрын

I’m glad you found the video useful Thanks for the comment 👍

I’ve been extracting stripped bolts for 8 years but I still watch this stuff whenever I’m working on my own stuff lol. Drill and extractor seems to be best

@ultimatehandyman

3 жыл бұрын

Thanks for the comment ;-)

Very useful video and I appreciate the effort you went through to film this. Thank you Ultimate Handyman!!

@ultimatehandyman

6 жыл бұрын

I'm glad you appreciate the effort as it took quite a while doing all the filming and editing ;-) You are welcome, thanks for watching the video and thanks for the comment

I can’t remember the last time we had such a dry spell in Darwen, apart from 1976. I guess one good summer every 42 years is not bad 😉 I’m off to do some outside D.I.Y I hope everyone has a great Sunday

@phils4634

6 жыл бұрын

I originally read that as "Darwin" - and though to myself "doesn't sound like the Darwin I remember" - 100% humidity and 38C summers . . . . . . . . . :-D

@pythonP90

6 жыл бұрын

Great Video! I'd like to offer my personal favorite way to extract any stripped bolt. Get a metal cutoff wheel in an angle grinder and make a plunge cut, doing this you essentially turn any bolt into a Flathead. works almost every time, and will even work on countersunk screws if you don't mind biting into both materials a little.

@ccmogs5757

5 жыл бұрын

Still going this hot weather - I remember "76 , also "84 was pretty good :] S.Wales

@davidgreen1299

5 жыл бұрын

I understood ever word you said. Coming from chorley it's not hard work

@chrispreston362

3 жыл бұрын

Ahhh thought I recognised the accent. Great video, cheers mate

Thank u I was fixing my screw on my computer and figure out if I used a small screw drive and Clened it I could get it out and it work! Ur cleaning technique was so helpful thank u🙏🙏🙏🙏🙏

After working for 37 years on oil and gas platforms in the Gulf of Mexico with it's salt water environment I can attest that the methods used in this video to extract broken screws, bolts, fasteners etc. works. We used the same methods along with brute force, finesse, patience, elbow grease and profanity. Lots of profanity.

@ultimatehandyman

2 жыл бұрын

It sounds like you had an interesting job 👍 Thanks for the comment

Always good tips,cheers👍👍👍👍👍👍👍

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment

@peternewman3487

5 жыл бұрын

Alan Mullock, On bolt heads, Use a reverse course threaded internal socket. I work on a lot of elderly MERCEDES engines especially removing cylinder heads and I always use that type of socket and then I throw the old bolts away.

4:59 this method worked for me i tired it after 2 hour of hopeless removing... so big thanks for you !!!

@ultimatehandyman

5 жыл бұрын

I'm glad it worked ;-) Thanks for the comment

@miguelcango6592

5 жыл бұрын

Kóbor Tamás that's the best \●

The best video with the most tricks I've seen the nut over the bolt then welded blew my mind. The centre punch well you sneaky devil.

@ultimatehandyman

4 жыл бұрын

Thanks for the comment 👍

Damn, I thought a magician never revealed his secrets. Thanks for the hard earned shop tips!

@ultimatehandyman

Жыл бұрын

You are welcome Thanks for the comment 👍

Another option for large bolts: When working on a right-hand thread bolt, drill out and tap for a left-head thread that is smaller than your bolt diameter. Thread in a hex-head left-hand bolt to your newly tapped hole, and as your left-hand bolt tightens completely, it will transfer force to your right-hand bolt, spinning it left / counter-clockwise. You essentially give yourself a hex head to get a wrench on. I tried this in a 24mm drain plug w/ Allen drive - I had limited access (so no chisel, welding on a nut, etc.) and its face was thin (1mm, too thin for vice grips). Extractors can snap if overtorqued and are difficult to remove if broken, so I view them as a last resort. Using a 5/8" - 11 LH tap and bolt (5/8" = 15.875mm, so well within the 24mm bolt diam.), I got this out smoothly. Sourcing the parts/tools you need is the biggest pain as they're not readily available to grab same-day, but once you have them, you can use again in the future. Might be a good option for someone who runs into the situation often. Best part is: if it doesn't work, you still have the ability to drill out for an even larger extractor such as a Walton REPS (look em up, they're gold)

Great Video, thanks you for the "Tutorial" it was very helpful, thank you.

@ultimatehandyman

5 жыл бұрын

You are welcome Thanks for the comment

Thank you!!! I was able to finally remove a stubborn Allen head bolt after watching your video. Appreciate your help so very much.

@ultimatehandyman

8 ай бұрын

Glad it helped 👍

Thank you. Very useful. A very thorough look at the practical options. Liked.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

A couple of my own tips... When u have to drill out a tough 10.9 / 12.9 grade cap screw or similar & u don't have a cobalt bit, use a masonry bit which has a carbide tip & if possible , grind a sharp edge (positive rake) on it. When heating bolts & nuts to free them, melt a candle onto it instead of penetrating oil. Works great !! 😎 Don't forget there are special occasions where a left-handed bolt / nut may have been fitted, hard to identify but usually on rotating parts only, just keep in mind. CSK screws can sometimes be freed by an initial heavy blow with a parallel punch directly on the head. Then chisel as in the vid... I prefer using a centre punch (as opposed to a chisel) for even larger csk screws as the collatoral damage is confined & also as the total energy of the hammer-blow is concentrated in a smaller area (think psi) for greater effect. Screws in cast iron can simply be burnt out with oxy acetylene as CI has a higher melting point than steel & the threads wont melt. The use of a screw-extractor or "easy-out" is fraught with danger, (particularly in the smaller sizes) as they are made "glass-hard" & as such are brittle. As u say in the vid , if u break one, u are not gonna drill it out... 😨 ALWAYS buy the best quality allen keys you can source, cheapos will only get u in more trouble. I've always used Umbrako brand & have keys that are 20 years old & still sharp-cornered... if u ring the edges, use a thin cutting disc to trim back to "fresh wood" ... 😅 Great educational vid... liked & subbed... 😎😎😎😎

@ultimatehandyman

6 жыл бұрын

Thanks for the tips Peter ;-)

@another1commenter770

6 жыл бұрын

Well here's is 2 more cents. For all Allen, spline, or torx bits. I call all versions of Spline style bits as spline (Triple square, Double hex, 12point ect). After a slight rounding Loctite method: Hit with pin punch to slightly squash head. Put a drop of the strongest loctite preferable with activator in the head. lightly tap the correct sized ratchet bit, Allen key or impact bit into the bolt. Go have a cup of tea or lunch. Come back and undo bolt. heat removed bolt to recover tool. The butcher method - Hammer the next closest size up bit into the fastener. For instance a an 8mm allen key should fit over tight in a 5/16th bolt head, Or 1/4" in a 6mm. same principle works for torx bits. After a major rounding The guerilla method - For all fasteners with a high wall height on bolt head. Hammer a tight fitting socket over the fastener. it will cut slight flats on the walls and jam itself on. then undo with a ratchet. Cheap sockets work well as they tend to swell to suit. This will damage the socket so don't use your good ones. The surgeon - Same as the butcher but with precision you drill the center to receive a spline bit when hammered in. Can also use loctite to assist in torque limits. Don't use heat once loctite is applied on any of these methods or you will release the loctite. However always use heat and penetrating oil before loctite if possible.

@tdbsnr

6 жыл бұрын

Excellent, v useful.

@reallytalltom1712

6 жыл бұрын

20 yrs working with cap head screws as an engineer. I will only use bondhus Allen keys. Frankly nothing else compares. That includes snap on, and Facom. All techniques are sound. On small stuff hammering in a torx bit of similar size can give you some purchase.

@neilhodge5402

5 жыл бұрын

Good shout, I do this myself

Good video. At the beginning, when talking about the tools, it would have been a great note that ball style drivers are a poor choice for breaking things loose. Even if it’s an awkward angle or limited access fastener, do whatever you have to to break it loose with a straight style Allen first then go to the ball driver. While they are handy in some situations many noobs are unaware of the limited engagement that style of driver has.

@ultimatehandyman

4 жыл бұрын

Thanks for the comment 👍

Great vid. Lots of good tips. I have used 2 techniques that i didnt see here. One is to hammer on the face of the bolt to mush some material back into the hole. Alittle heat can help this along. The other is to braze the wrench into the bolt. Works good if you got the swing, and when youre done, you can get your wrench back.

Just a heads up for everyone else watching. If your are going to be using some type of allen head in a crappy environment. You should ALWAYS fill the allen cavity with silicon or some other barrier to stop erosion and build up of dirt. This does not work all of the time and these tips illustrated are great. Thanks for the video.

@ultimatehandyman

5 жыл бұрын

You are welcome Thanks for the comment 👍🏼

When you need to apply heat - those smaller blowtorches much loved by Professional Chefs are very useful. VERY compact yet hot flame, with a nice compact unit overall. For REALLY tight spots - you can get "pencil" butane torches from Ebay, etc, which can be a godsend.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@hotice8885

5 жыл бұрын

What in the world would a chef use a blowtorch for?

@dookie3453

4 жыл бұрын

Hot Ice quickly cooks/ browns the surface of things like a meringue

@paredding

4 жыл бұрын

@@hotice8885 creme brulee...just borrowed my wife's as I am down to heat as a last resort on a sump pan bolt. Last one with limited access :-)

@scherritknoesen148

4 жыл бұрын

Dremel make a good little torch.

That was brilliant!

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

Good video, I gave it a thumbs up. The only exception is applying heat, I think you might be missing the idea of applying heat. Heat expands metal, the trick is to expand what the bolt is screwed in without (as much as you can) heating the bolt itself, thereby the bolt is slightly smaller that what it's screwed into making it easier to remove. When doing this, a person has to work fairly quickly as not letting the bolt reach the same temp as whatever it's screwed into. Have a great day.

@ultimatehandyman

4 жыл бұрын

Heating up the bolt often breaks the bond between the bolt and what ever it is screwed into- once it cools back down. Thanks for the comment 👍

After having used all of these methods for many years I can say your not only a good mechanic but you are also a really good educator. Very good job!!!

@ultimatehandyman

4 жыл бұрын

Thanks for the comment 👍

great tips!

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

Swearing at it is the last measure 😂😂🇦🇺 Well narrated information video and some techniques I haven't seen before...thanks.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

Your video helped me get a bolt out and probably saved me a few hundred dollars. All it took was a 3/8 chisel and 100 or so whacks with a hammer to the left. :) Thank you!

@ultimatehandyman

2 жыл бұрын

I'm glad the video helped Thanks for the comment 👍

All of your videos have been so helpful to me, thank you.

@ultimatehandyman

4 жыл бұрын

You are welcome Thanks for the comment 👍

Nice video. I found soaking the bolt a few days using beakaway and shocking it inbetween soakings can help. Sometimes a combination of heating, soaking and shoking can really help. I find drilling can produce enough heat to loosen the bolt. I once had exaust manifold bolts that took a whole week of soaking, shocking and finally was able to get the bolt free. I hate allen head bolts with a passion.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@daleburrell6273

5 жыл бұрын

...well, if you HATE allen head bolts so much, then why don't you KILL them?!!

One of my favorite tips is using a dremel with a cut off wheel to cut a slot for a flat head screwdriver. Hacksaw will also work except for counter sinks.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

@1991enduro

3 жыл бұрын

Wa u recon about torx bits i dont like going hard in the banging in my dirtbike as it might brake lol cost me more cash im thinking of a dremmel

The last resort method worked for me getting a threaded hex of of a expensive bike crank arm !! 👍👍👍

@ultimatehandyman

3 жыл бұрын

I'm glad the video helped Thanks for the comment 👍

one of the most informative videos ever!

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

One more: Hammer a slightly oversized Torx bit into the rounded socket. That usually bites well.

@EQINOX187

3 жыл бұрын

I was about to post the same, I have never bothered buying dedicated tools as i rarely encounter this issue but when I do i use some old cheap torx bits and as you said hammer them in and for me they work every time

@randomgoose

3 жыл бұрын

This worked for me. Domed head, recessed in plastic panel so some of these options wouldn't work for me. Saved drilling it out. Great vid though. I'll be screwing the same bolt in for the next person!

@wisniamw

3 жыл бұрын

THIS AND ONLY THIS you wont dmg Torx if you wont remove 1000 bolts, screw is the least dmged, and it is soo fcking simple just use Torx

@whatsup8464

3 жыл бұрын

Yea multispline works great

@Mike75575

3 жыл бұрын

Ye. It's the No 1 go to way for me for recessed heads.

GOD BLESS YOU MATE!

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

A very detailed example of every scenario with bolts and nuts that are a bastard to get out. Brilliant video chezzer. Thanks for posting 👍👍👍👍👍

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment

Proper toolroom experienced engineer , I,ve been repairing things for 46 years , & had never seen a spring - loaded punch before that you ping upwards like that , magnificent , a mate & myself spent 3 days getting the front suspension ( macker) struts off of my caddy van , as you just can,t get at the s***+ng bolts , then another 3 days changing the top bearing mounts , these are worse , as you must save the ends of the strut rods , but sacrifice the nuts to release them ,the strut rods are female Allen socketed , & invariably already chewed up internally , ( then fit new top grade S.L. nuts guys ! ) I just wish I had seen this first , rock on mate , power & respect to Lancashire . ( yes, we did win the battle , & the old van went straight through the test)

@ultimatehandyman

3 жыл бұрын

I've had fights like that in the past with nuts/bolts/screws/etc. The spring tools are brilliant! Thanks for the comment 👍

You can use a torx socket, that are usually tapered. After grinding it down for a tight fit, it can be pounded into the hex bolt. This has worked for me on a couple of occasions.

@ultimatehandyman

4 жыл бұрын

Thanks for the comment 👍

An imperial set of tools can be handy when bolt/cap screw or nut has rounded as they are often a mid-metric size which can be pounded in.

@ultimatehandyman

6 жыл бұрын

Yes, Imperial sizes can be odd though. Some of the machines at work use metric, then imperial then a different size imperial, then a different size metric all on the same component- it drives me nuts sometimes. There seems to be a lot more imperial sizes, than metric. Thanks for the comment

Very useful video. The last method with the spring punch is pretty cool.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

Great range of tips, very helpful. Thanks!

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment

you didnt cover the first step, swear at it.

@ultimatehandyman

6 жыл бұрын

Swearing is mandatory when doing jobs like this ;-) Thanks for the comment

@RANDALLOLOGY

6 жыл бұрын

Jusb1066 ain't nothin better than saying words that would get you kicked out of church for such a potty mouth. Lol. Doesn't get the screw or bolt out, but it makes you feel better for saying those words. LMAO 😹😹😹

@BMikeAD

6 жыл бұрын

RANDALLOLOGY if you yell loud enough the sonic waves break up the rust. Only works with profanities though.

@frankhovis

6 жыл бұрын

I'm still trying to find a set of left handed allen keys for undoing, all the ones I have are right handed for tightening.

@lewiemcneely9143

5 жыл бұрын

YOu forgot BLO! If it'll take the barnacles off a wooden leg it ought to back an Allen head out!

On 1/5 scale rc cars with a flush mount I've used a Dremel to cut a notch for a screwdriver or a sacrificial 1/4" torx head pounded in. MIP Thorson Allen head wrenches work best on the small stuff.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@Brianmlife

5 жыл бұрын

I was going to say the same thing about using a Dremel to cut a slot. I use this a lot on my rc vehicles.

Thank you! I was so frustrated with this DIY furniture screw and Allen wrench from America's Superstore. The screw was stuck halfway into the bookcase and then stripped! Your advice for using the grips worked like a charm.

@ultimatehandyman

4 жыл бұрын

I'm glad the video helped ;-) Thanks for the comment 👍

@peterfitzwell1689

4 жыл бұрын

Damn gurl 😍

THANK YOU!! I had a small Allen head flush screw that was stripped and I used a punch and a hammer and It worked perfectly!! Thanks again !!

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

I'm dead impressed with the sprung centre punch! I thought that bolt would just laugh at it.

@ultimatehandyman

3 жыл бұрын

They are great. At first I thought they were a joke until I tried one, they are very useful! Thanks for the comment 👍

Great tips!

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

The centering tool technique was amazing. I used it just after watched your video and it worked like a charm.

@ultimatehandyman

11 ай бұрын

👍

Once I stripped a dome head so I dremeled a straight cut into it and I could undo it with a flathead. These were nice methods too, honestly I didn't know vise grips existed, you learn something every day!

@ultimatehandyman

Жыл бұрын

👍

Excellent video ! I’ve drilled a fair few Knackered grub screws out. What brand of mole grips are you using at the moment ? Here’s a tip, if you can’t get decent screw extractors use an annealed file tang, very good quality steel.

@ultimatehandyman

6 жыл бұрын

Grub screws can be a pain to drill out, I've done a few myself at work! My mole grips at work are Teng, I have a set with about 5 pairs, a couple of which are long nose. File steel is good, a few of the fitters at work have made old files into scrapers by brazing a piece of tungsten to the end. Thanks for the comment

@jusb1066

6 жыл бұрын

i find the genuine american vise grips are very sharp indeed all over their range, the teeth are milled in, so can grip right at the end when you need it, the very worst are the original british mole grips, not sharpely milled and smooth near the ends ( not a shareholder! lol, just my experience), though the american vise grip release i dont like, when its really really tight, you need a pair of pliers to squeeze it off again!

@daleburrell6273

5 жыл бұрын

@@jusb1066 ...how does THAT grab you?!

@davidallison1732

5 жыл бұрын

File tangs are already soft so no need to anneal them

@davidgreen1991

5 жыл бұрын

They look líke American Vise Grips (proper Yankee spelling)they are on sale in the UK,for about £30 I have been told,and they are miles better than Moles.I bought mine (like new) from the car boot sale. I asked the woman how much,she said 50p,so I was generous and gave her a £1.she was delighted,but also,so was I.

One way I like is to take either a 6 point or 12 point torx bit and hammer it into the rounded-out head.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@bigmikeh5827

6 жыл бұрын

I am an Industrial Maintanence Instructor. I have used the torx bit as my goto for removal. Also teach my students to use an engraver to remove broken bolts. A good penetrant. (Not wd40). Heat with paragon works too.

@markkNL

6 жыл бұрын

Indeed, use torx bits on damaged hex bolts, and hex bits on damaged torx bolts to remove them.

@mickenoss

6 жыл бұрын

This is the first thing I try, I have a bunch of naff ones I keep knocking about specifically for this.

@G-Tay

6 жыл бұрын

Same technique we use on drainage floor bolts... works most of the time.

Another great video as always. Thanks for taking the time to do this !....

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment

Excellent video. Very educational. So now I know after struggling with such damaged hex screws many times. Thanks.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

Two other techniques are the use of a manual impact driver and the old trick of first tightening the stuck bolt.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@jasonoflion83

5 жыл бұрын

I use to always catch help for doing that, but I just don't think most can visualize what is happening with the threads.

@pinballrobbie

5 жыл бұрын

that works with wood screws also especially old rusty ones

@some______guy

5 жыл бұрын

Tightening it a bit works great on stuck wheel bolts. Also having a high quality deep impact socket from wurth doesn't hurt with the torque.

Another method I've used is to hammer a torx head bit into the rounded allen bolt, that will grip enough to get them out. Not sue if it would work n larger bolts but on motorcycles it works well.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@gepwxaqdfsidsesg1548

6 жыл бұрын

I did this yesterday with a rounded dome head bolt. The torx bit hammered in removed it quite easily.

@CheapskateMotorsports

5 жыл бұрын

Damn that sounds like it might solve my problem, I've just got to make sure I don't accidently hammer the bike over

Thanks a ton mate this video saved me a trip to the Mercedes Benz dealership

@ultimatehandyman

3 жыл бұрын

Glad it helped Thanks for the comments

Mole grips!! Genius, thank you! Worked like a charm!

@ultimatehandyman

3 жыл бұрын

I'm glad the video helped Thanks for the comment 👍

If the bolt head sticks out, use a pipe wrench. The wrench will grip more as you apply pressure

Thanks for the great tips! What is the brand of your center punch, I have never seen one like it. Subscribing now.

@ultimatehandyman

6 жыл бұрын

That centre punch is very useful in confined spaces, I did a review here- kzread.info/dash/bejne/mJ5214-th8fXn8Y.html Thanks for the comment

Never seen the centre punch with the spring, great vid thanks for posting.

Great video as usual. Enjoy your Sunday!

@ultimatehandyman

6 жыл бұрын

Thanks, I'm getting some filming done whilst the kids are out enjoying themselves ;-) Thanks for the comment

One important thing to remember, is before even TRYING to remove a hex head screw- make sure that the corners on the hex wrench are NOT ROUNDED!! You always want to remove a hex head screw on the first try- and trying to use a rounded hex wrench puts you at a GREAT disadvantage-!!

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

I had a cap head stuck on my motorbike hugger. I found when it rounded, if hit flat with a hammer the hex shape would return. But still stuck I dremelled the round head into a hex shape and put a small socket over the top, which sheared off when turned. I used a heatgun & oil but the alu swingarm was a big heatsink. I then drilled it out and tapped a smaller hole in the remains as I didn't have the right size bolt.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@daleburrell6273

5 жыл бұрын

...you can't ALWAYS win-!!!

I’m an industrial mechanic with over 4 decades experience. I used to use these techniques but have found 2 others that save time and effort. One way I have used for years is to drive a Torx bit into the bolt. This will work quite well. The second way is MAC Tools have come out with RBRT hex bits. Rounded Bolt Removal Technology. I purchased theses socket and they work spectacularly.

absolute asmr content , I enjoyed it. along with the ways to learn, the way you show them makes it look so satisfying... thanks for sharing this one, good luck for next one!

@ultimatehandyman

2 жыл бұрын

Thank you so much 🤗

I use these techniques and also use the beating a torx socket bit into the hex method.

🤓 Neat Center Punch

@ultimatehandyman

5 жыл бұрын

Yes, the spring tools centre punches are really useful. Thanks for the comment

@MrSamadolfo

5 жыл бұрын

@@ultimatehandyman 😇 ur welcome

I have already used one of your methods, I took out eight 1/4 inch rusted bolts from my mower deck, using the pilot drill bit to center up and drill. got all eight out and only trouble with two. Great tip.

@ultimatehandyman

5 жыл бұрын

I'm glad the video helped ;-) Thanks for the comment

That's some clever work, you da king , man! I, however, am the KING of stripping bolts, and I must move swiftly to stay ahead of you.....

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

use a 12 point bit that is a little bigger than the hole, mash it in with a hammer and just screw it out. Works 9 out of 10 times on first try

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

@ddd228

5 жыл бұрын

An air hammer is a fast hammer.

@daleburrell6273

5 жыл бұрын

@@ddd228 ...well, don't KNOCK it-!!

Heat, then put a candle on it the heat draws the wax down into the threads. Best penetrator ever

@ultimatehandyman

6 жыл бұрын

I'm going to try this one day ;-) Thanks for the comment

Great video and you covered a lot of situations on ways to remove the bolts and screws very well! Nice work. One more tip here, if you can get to the back side of a busted bolt such as broken off in a stainless steel cover plate you can then drill with a standard right hand bit same as you would use a left hand bit to walk it out. Do this after you let the new guy try a left hand bit not thinking hes actually slightly tightening it, walk up, smack the bolt with a thumb detector (hammer) and a punch, drill it with your right hand bit and it should easily unscrew out the other side after he's heated it for you with the wrong bit.

@ultimatehandyman

5 жыл бұрын

Thanks for the comment

Am I the only viewer who thinks the Ultimate Handyman can drill a straighter hole free hand than I can do with a drill press? He is good. Very, very good.

@ultimatehandyman

3 жыл бұрын

😂

That's for the reply but I'm in the usa

@ultimatehandyman

5 жыл бұрын

In that case- springtools.shptron.com/

@marxsnodgrass

3 жыл бұрын

Ready tidy Leftie Lucy

Guess we can say you have been screwing around all day. Lol

@ultimatehandyman

6 жыл бұрын

LOL

@daleburrell6273

5 жыл бұрын

...your welcome is hanging by a THREAD-(!) (SNUCKER-SNUCKER-SNUCKER!!)

Thanks for saving me! tried so many other tutorials and none worked.... yours did!

@ultimatehandyman

3 жыл бұрын

Glad I could help Thanks for the comment

Thank you for posting this video. It helped me get out of a situation.

@ultimatehandyman

3 жыл бұрын

You are welcome Thanks for the comment 👍