Little tip. Those diamond tipped hole saws are NOT directional. So if you set your drill to anti clockwise (undo) the hole saw will still function exactly the same, but often it will catch on the screw and the screw will actually unscrew itself before you've drilled deep enough to need a dowel.

@aries6776

7 ай бұрын

Great tip. Thanks for sharing.

@realstonecan

7 ай бұрын

You are right, I've using this technique to remove salt water corroded brass screws from hard wood. In most cases, most of the screw comes out with just a little drilling.

@jossfitzsimons

7 ай бұрын

Very good method. A rubber Puff ball with nozzle would help greatly with the sawdust & burning problem.

@Patrik6920

7 ай бұрын

...and, well depending how rich u are... ..using diomond tipped tools for wood is usually a very bad idea... diominds r a carbon material, wood contains very much carbon, and wear down diomond tools quite fast, the higher speed the more wear... u hit litterally hit carbon with carbon,, a steel or carbide is much better for wood, it will not only be more effective, it will save some money too ...diomind r not very suitable for materials containing high ammounts of carbon ...it wears down quite fast, .. for stone its perfect and last almost forever... (unless ur unlycky...stone can have carbone also)

@Patrik6920

7 ай бұрын

@Tekagi ...depending on drillbit, it may not matter alot ... what matter most is transporting grinded material fast enugh from the cutting surface.... wich this kind of drillbit does a poor job at for wood... edit: diomond cutting edges r of two types, natural diomond and artificial diomonds, natural diomonds r usually more expensive, and (most) manufactured diomonds have one lattice direction thay are stronger in, and one transverse direction thay fracture easily in, depending how the tool is made.. the angle a surface is worked can matter alot (always sheck how the tool was made and for what angle), natural diomonds dont have the same problem.ö ...and if its a boron-nitride-diomond it wont matter much... thay will curt anything like butter... at a cost ofc... tools can be alot more expensive than diomond...

This "old dog" has just learned a new trick. Something new every day. Brilliant. Thanks for posting!

@ultimatehandyman

Жыл бұрын

I’m glad you found the video useful Thanks for the comment 👍

It'd never occurred to me to use a hole saw to help remove screws. What a simple yet brilliant solution 👍

@harryl7946

Жыл бұрын

Exactly what I was thinking too! 😂 Never occurred to me.

@ultimatehandyman

Жыл бұрын

Thanks Matt 👍

@skwalka6372

Жыл бұрын

Same here, this was one of the most useful videos I ever watched!

@DaleMarriott1337

Жыл бұрын

to be fair i thought this video wasn't that good at fist i thought what a rubbish idea to remove a screw. but once you see the dowels go in it all makes sense.

@IamVince1aa

Жыл бұрын

Short piece of brake line with a few small slits will work also

This is exactly the video I needed. I snapped three screws from a vintage armoire cedar chest and stopped until I could figure out how to fix it. Now that I know, I can continue to restore it. Thanks so much for this and for all the comments below with more helpful hints.

@mlaiuppa

7 ай бұрын

Oh, and before all of the geniuses on this post start jumping on me, I was doing it by hand, not using a drill. I even tapped them lightly with a hammer to loosen them a bit before I took them out but they snapped any way. 70+ years old. Thanks to this video I now have a method to repair my armoire. So thank you, Ultimate Handyman. I'll be subscribing as you have solved my problem. And no, I won't be using cheap screws when I reassemble my armoire.

I've had my mother's bentwood rocking chair awaiting this video for about ten years. one of the arms broke off leaving a stub from a hidden screw in the frame, which has defeated all previous attempts to remove it. I just know victory is in sight now!

@ultimatehandyman

Жыл бұрын

👍

Great video with a no nonsense delivery and approach to the job on hand.

@ogstopper

Жыл бұрын

Lancastrians - finest, no-nonsense people in the country!

@ultimatehandyman

Жыл бұрын

Thanks Thomas 👍

Love it! Have obviously repaired holes with glued in wood before, but the use of the tile diamond drill to get a whole screw thread out was a new one on me. Subscribed.

@ultimatehandyman

Жыл бұрын

Thanks for the comment and sub 👍

Must admit I've used dowels to repair door frames where the doors were falling off but never had to remove a snapped off screw (yet) that's an awesome solution 👌🏻

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

@Itsme-vo4fx

Жыл бұрын

Which direction does the drill bit turn, forward or reverse? I would think that using the drill in the forward direction would only push the broken screw further down.

@aznative_

Жыл бұрын

@@Itsme-vo4fx you're not thinking very clearly. Using that type of drill that's not spiraled going either direction does the exact same thing it doesn't push it in or force it out. It just spins. The reason a drill bit goes in when you're going forward and goes out when you're going in reverse is the spirals. This doesn't have that concept. They also have left-handed drill bits that go in when your drill is in reverse that would absolutely blow your mind.

@carsten4594

7 ай бұрын

​@@Itsme-vo4fxThe "drill" is actually a hole saw. Doesn't even touch the screw. 😊

Put a small grove in the side of the dowel. Put glue in the hole and on the side of the dowel then pound it in. The excess glue in the hole will flow out the grove giving you glue over all of the dowel even in the bottom of the hole where the dowel is rounded. Without the grove the glue in the hole will prevent the dowel from bottoming in the hole.

@martincrabtree6704

7 ай бұрын

If you look at the dowels they've already got grooves in them.

@davidwhite5845

7 ай бұрын

I've seen excess glue split the wood because it had no way to get out.Good tip.This is why commercially made dowels have grooves.

@joelmcclellan1050

7 ай бұрын

I believe he had fluted dowels.

@rango_unchained

7 ай бұрын

Put like a small orange grove in the side of the dowel? If you could actually do that it would be groovy.

@redwood_shores

7 ай бұрын

​@@martincrabtree6704That's not enough, unfortunately.

Brilliant tip mate, the amount of times I’ve lost the plot on site when I’ve snapped a screw is unreal, I’m so happy now I know this, cheers mate

@ultimatehandyman

Жыл бұрын

I’m glad you found the video useful Thanks for the comment 👍

Really, really useful tip, thank you.

For larger screws I use some stainless steel pipe from hydraulic appliances, used in shipbuilding for example. This pipe has an outer diameter of about 12 mm and I file some teeth to the end. Sharpening can be redone quite fast and is probably a lot cheaper than a diamond drill pipe. You may include that in an update video if you like.

@charlesingram9471

2 ай бұрын

Or you can just get yourself a 7mm HSS holesaw lol

Wow! Really a very smart idea! Never thought that could be fixed! Thanks for sharing!

It’s possible that the screw head snapped off during removal because the wood was oak or similar and not pre drilled. With power impact drills you can drive screws into almost anything. When doing this you may get the screw in or almost in with screw head maybe on an angle as it will follow the path of least resistance in the wood. Pre drilling insures that the goes in straight and will come out. The drill size used should allow the hole to capture the threads of the screw and not the screw shaft.

@ultimatehandyman

Жыл бұрын

👍

@kenibnanak5554

7 ай бұрын

If you are building a large deck with screws with a 100+ boards, it is kind of rare to be willing to spend or waste an extra day pre-drilling screw holes. What customer would pay for that extra project time? Sometimes I have deck screw heads snap off during insertion, but simple pliers are usually enough to remove them and try again. Deck screws are deliberately made out of soft material with weak necks. The most common failure I see is when once straight boards begin to warp after a few seasons and the screw fails and the head pops off as the board bends. Previously, snipping off the bottom and redrilling alongside was the easiest fix beyond simply replacing the deck board.. I will look into this video's method.

@paulkolodner2445

7 ай бұрын

Here's an argument for using screw wax. It reduces the friction when you drive in a screw.

@richardm7004

6 ай бұрын

Indeed. I watched a so-called tradesman/joiner doing this, trying to drive and snapping three screws in a row, whilst hanging a door into an Ironbark (Australian eucalypt - Eucalyptus sieberi) frame. I always pre-drill and use beeswax to lubricate.

@garypautard1069

6 ай бұрын

Yes I agree I see DIYers using impact drivers for almost every job going but they are often too powerful and I think myself , only suitable for wood to wood applications.

Good demo! For a longer screws, I use a larger hole saw (or a plug cutter) and only go deep enough to access the screw. Then chisel material enough to attach a small vice grip plier to the screw. Not sure but lubricant may help if the wood is very stubborn. I had to do this in a white oak burl knot. Made the plug from similar material and it’s almost invisible.

Nice...I've never seen anyone do that in 20 years but it's a good move in the right situation.....definitely will remember this one. Thanks

Outstanding, no nonsense thorough professional job...

@ultimatehandyman

Жыл бұрын

Thanks Brian 👍

Thought you might like this kudos... Just watched Roger Bisbeys' channel asking PlumberParts guy: "Who was the first to offer advice online?" And they both said you! .. and thank you for replying to my queries over the years x

@ultimatehandyman

4 ай бұрын

That’s great to hear. I don’t watch other DIY related videos, but I do know them both (not personally though) 👍

Neat trick, *Thank You!* 👍👍 Now I have to get one of those hole saws.

That a neat way of getting the screws out, normally I don't like to screw into end grain, as an apprentice church organ builder in the early seventies using traditional mild steel Nettlefold type wood screws, fixing those into endgrain was a total no no. But with modern screws with very thin sharp threads, they go in and hold pretty well so I suppose it's acceptable to do it although I might well use a screw that is at least 3/4-1" longer to get a hold in the parent wood. Especially if this was on a heavy door type of repair

Wow, another brilliant video. Thanks

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

Very smart method ! Thank you for sharing it .

Excellent video. Thanks!

Top draw skills as always thank you for sharing

Awesome job.

very good technick

Very nice. Thank you

Nicely done

Thanks for sharing!

Very Informative. I will definitely add this to my collection of tricks. Thank you!!!

This has happened to me on a couple of occasions but lucky the other end of the shaft of the screw was sticking out so I just gripped with a pair of pliers and twisted it out but saying that now I know how to do it if it doesn't ! Thank you mate best wishes Alexander . 😁 😂 👍 👍

@ultimatehandyman

Жыл бұрын

Thanks Alexander 👍

My morning coffee is getting cold watching this well done my friend...great channel.

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

Thanks for this tip, that’s what I need for my project!

Just checked out your channel, full of really good tips, it’s now my new bible, instant subscribed

@ultimatehandyman

Жыл бұрын

Brilliant, I’m happy to hear that 👍

Very useful tips .. Thanks so much

Great idea and a perfect solution. Cheers for that.

@ultimatehandyman

Жыл бұрын

Thanks 👍

Yes, brilliant method! Thanks for sharing.

@ultimatehandyman

Жыл бұрын

I’m glad you found the video useful Thanks for the comment 👍

Excellent video.

Great video

Great tip. Worked like a champ. Thanks for sharing

@ultimatehandyman

3 ай бұрын

Great to hear!

Fair play, excellent technique and demonstration.

@ultimatehandyman

Жыл бұрын

Many thanks!

I'm jealous of that clamp -- it's a beauty.

If you don't want to tear out the wood when you're drilling for the dowel you can start the drill in reverse to minimise the amount of tearout and then flip it back to forward once you go down about a millimeter.

@GentlemanH

9 ай бұрын

Thanks for that tip. 🙂

@thechumpsbeendumped.7797

7 ай бұрын

Diamond drills are not directional so having the drill in reverse would mak no difference. The method he used not only stops the drill wandering it also stops the tear out.

@babbittdawabbitt3716

7 ай бұрын

@@thechumpsbeendumped.7797 he’s talking about the twist bit.

This was where my head was going, but I couldn't find a hollow coring bit that small. "Use a diamond bit." Of course! And I happen to have a set stashed away somewhere. Thanks, man. You really saved my day.

@ultimatehandyman

7 ай бұрын

Great to hear! Thanks for the comment 👍

Saving that one for a rainy day, excellent tip!

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

Great Idea very good tip thanks

Man that was amazing and super simple to do. Thanks man!!

@ultimatehandyman

Жыл бұрын

Glad it helped! 👍

Nice job! Thanks.

@ultimatehandyman

7 ай бұрын

Thanks for watching! 👍

Great idea! Thanks for sharing.

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

What a terrific job. Like others have already said, I've been waiting for this video for a very long time.

@ultimatehandyman

2 ай бұрын

I’m glad you found the video useful Thanks for the comment 👍

Very clever solution

Thanks for teaching ...

@ultimatehandyman

2 ай бұрын

You are welcome Thanks for the comment 👍

What a coincidence!! I also use the same method. This method is useful for broken nails also. Good job 👍

Very nice, thank-you!

Not seen that sort of hole saw before, good to know, thanks

The perfect video to help me rescue victory from the jaws of defeat - thank you Sir

Thank you.

Good tip

Awesome video. Nice to know there is a solution. Thanks for sharing.

@ultimatehandyman

Жыл бұрын

👍

Great idea! Ordering a mini hole saw as we speak. Thanks.

@ultimatehandyman

Жыл бұрын

They are so useful 👍 Thanks for the comment 👍

Thanks for this.

Brilliant solution... Thanks for sharing :)

@ultimatehandyman

Жыл бұрын

You are welcome, Paul Thanks for the comment 👍

Nice work mate👍

Thanks for the video. I have some broken screws in my lever on rose door handles where the fitter hadn’t used the bolt through fixings and instead just used the thin screws to hold, which subsequently snap over time.

@ultimatehandyman

Жыл бұрын

👍

I enjoyed this video and this is a significnat problem in old wooden boats with hundereds of screws on planks , corrosion and swollen old wood. One solution that I have used with great success and you could try is a modified version of this using small hole saws or steel tube with teeth filed for reverse cut adna split in the tube. Use a tube slightly smaller diameter ant it cuts down the screw shank, splays and grabs the screw, then unscrews it once the grip overcomes the grab of the remaining screw. Home made cutters only do a few as teeth are not hardened and get more splayed, but works a treat. There was a place in the USA that made some bits for this, but I have lost their contact and they were very expensive to but from the UK, but they can be made with some ingenuity if you have lots to do.

@ultimatehandyman

Жыл бұрын

👍

I drilled out lots of broken screws usually in oak door jambs old ones. I just drilled around broke screw with small bit, then screwdriver to dig screw out. Then drilled hole for dowel, never saw those diamond hole saws. GREAT JOB

If diamond drills are not your thing, you can use a "Roll-Pin". These are hardened steel hollow tube pins used for engineering location dowells, hinges and the like. You'll need to cut a tooth shape into one end of the roll pin which you can easily do with a diamond cut'off wheel. As the writer below says, best to cut the tooth for anticlockwise cutting, as often times it will pick up the screw remnant and withdraw it for you.

@oscarbear1043

6 ай бұрын

Roll pins are spring steel and they would make a decent wood cutter.

Very clever thanks

@ultimatehandyman

5 ай бұрын

You are welcome Thanks for the comment 👍

Very informative video for a new homeowner that just found out that my backdoor has 3 snapped screws in the doorframe!

@ultimatehandyman

8 ай бұрын

I’m glad you found the video useful Thanks for the comment 👍

Very useful thanks.

Thanks

Awesome tip

@ultimatehandyman

5 ай бұрын

Thanks 👍

Really good idea. Thanx a lot!

that's a really bright idea.thanks

@ultimatehandyman

Жыл бұрын

Glad you like it! 👍

very nice.

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

I’ve never heard of a hinge drill or a diamond hole saw so thanks for enlightening me........and for the useful video. Best wishes.

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

Nice work 👍🏻

@ultimatehandyman

6 ай бұрын

Thanks 👍

Wooden window frames was murder for this year's ago. Good demo. Thanks for the video 👍. Have a nice Sunday (whilst some of us are working).

@ultimatehandyman

Жыл бұрын

Sorry I did not reply on Sunday, This video was uploaded last week and was scheduled. I was in hospital, having had another heart attack, so I could not easily reply. I’m home now, so can reply. I have had another stent fitted and I’m absolutely fine 👍 Nobody on KZread knows apart from you, unless they read this comment 😉

@lazylad8544

Жыл бұрын

@@ultimatehandyman hope you get well soon pal. You must be liking that hospital food by now😉

@ultimatehandyman

Жыл бұрын

@@lazylad8544 I'm good thanks- just like last time! Ironically the food used to be excellent in Blackburn Royal, but it was not as good this time 😉

Very cool, never seen that method.

@ultimatehandyman

2 ай бұрын

You are welcome Thanks for the comment 👍

Thank you

@ultimatehandyman

5 ай бұрын

Thanks for the comment 👍

Just used the method of gluing in the dowels and cutting it flush to refit my kitchen cupboard door, never thought of doing it this way cheers chez!

@ultimatehandyman

Жыл бұрын

I'm glad the video helped Thanks for the comment 👍

That was interesting and I thank you for sharing. I’ve got a couple of clamps just like the ones you used 🌞

@ultimatehandyman

5 ай бұрын

I’m glad you found the video useful Thanks for the comment 👍

Very cool, something I never considered. I’ve never broken one off in a fixed hole hinge like this, but have many times when screwing in bookcase shelves (hard red oak) and could only plug the holes and move over an inch or so. Great idea, I’ll have to find one of these small hole saws which I’ve never seen before. All my hole saws are much larger, at least 1”. Thanks again! 😳

@ultimatehandyman

7 ай бұрын

I’m glad you found the video useful Thanks for the comment 👍

@peterloichtl4512

5 ай бұрын

Tile hole saw u get it in tile tool section.

Gr8 Job, now I will use the same Technique.! ❤

great tip.

@ultimatehandyman

Жыл бұрын

Glad you think so! 👍

Love it boss solution

When putting new screws in, drilling a pilot hole first can help prevent shearing screws heads. I find this is especially needed when buying fitting that come screws (cheap ones where function comes 2nd to their shiny looks), screwing in long screws, and screwing into hard wood. Sometimes giving old screws a quick tap with a hammer using an old screw bit can also help reduce head shearing. Thanks for the tip on using a diamond bit, didn’t know they existed so I’ve always used a large drill, guide hole, patience and hope.

@wallacegrommet9343

7 ай бұрын

There are special self-centering, spring loaded drill bits that work with hinges to drill a perfectly sized bore. Originally from Vix, now every tool company makes them. He used one here.

What a great idea, You have just created a need for small tungsten carbide hole saw, that has wood cutting tooth profile.

Thank You That was very good clear understood and helpfull Thanks

@ultimatehandyman

Жыл бұрын

Glad it was helpful!

Brilliant, mate!

@ultimatehandyman

7 ай бұрын

Thanks 👍

Brilliant!!!!

Very useful tip thank you as a plumber im always coming up against these sort of problems great way of getting broken head s out

I like your idea

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

First class video that mate.

@ultimatehandyman

Жыл бұрын

I’m glad that you think so Thanks for the comment 👍

Great idea, thanks!

@ultimatehandyman

Жыл бұрын

Thanks for the comment 👍

The first DIY/handyman tip that I found use full. Not some if "I had only know this"load of brain dead unless so call info. Well done Lad.

@ultimatehandyman

Жыл бұрын

I’m glad you found the video useful Thanks for the comment 👍

Good stuff.

@ultimatehandyman

Жыл бұрын

👍

Brilliant 😊

Nice tip, I'll have to add one of thos bits (and the hinge centering bit) to my toolbox.

@ultimatehandyman

Жыл бұрын

They are brilliant 👍

Great tip, thank you. I'm a Locksmith, that will come in handy