So I have to give a big thank you to 5150 guys. They did a wonderful job on my jeep. I had shoulder replacement surgery and wasn't really healed. So when they showed up I called Patrick up and told him what I needed done. I met him when he was a Freshman in my first year of teaching wood shop. I believe Patrick was with me all four years of High School. We were interested in the same things Cherokee's. I did let EAG know about the videos they were excited, they have people calling them about a video for the installation all the time. The young Lady took down the info on where to find them on KZread so she can give them out. Thank You guys again wonderful work and they look great!!

@GrundlThief

4 жыл бұрын

If you don't mind me asking, how far does the lower part of the bumper go compared to the front crossmember that connects the frame rails (big center piece of metal with the two big ovals cut into it)? I'm looking to install a BIG transmission cooler and need to cut that crossmember underneath and extend it down about 2-3 inches. Hoping the EAG bumper will still cover that. Thanks in advance!

Hello. After removing the stock bumper, what is the estimated installation time, including electrical assembly???, thank you.

@5150MotorSports

6 ай бұрын

Thanks for watching, a couple of hours…

Do a vedio of installing that eag bumper on 2000 grand cherokee

how do you connect the lights???

how is this bumper holding up?

Quick question where did you re-locate the "plastic ball" off the bumper ??

@5150MotorSports

4 жыл бұрын

Passenger side fender well, We used a couple of sheet metal screws.

Did you have plenty of play in the bumper mounting bracket with the extra steering box brace you put in?

@5150MotorSports

3 жыл бұрын

Hi Alex, The bumber fit snug with the extra steering brace, but not to tight. Thanks for watching.,.

Do the leds come with a switch for the lights or do I need to buy a light panel?

@5150MotorSports

2 жыл бұрын

The lights and switch came with the bumper.. Thanks for watching.

Felicitaciones 🎉🍺☘️

🍀☘️👏

Has this bumper ever had any shortcomings on strength? I love the look and price of it but I’m always scared that if someone tries to pull me it might just get ripped off

@5150MotorSports

3 жыл бұрын

Hi CJ, This bumber is built very strong, all 3/16 steel. The week point is the XJ frame we’re the bumber mounts. We added bumper tie in brackets and xtra reinforcement to help make it stronger. Thanks for watching.

Where are the frame tie in brackets ?

@5150MotorSports

3 жыл бұрын

Most bumpers do not come with them, but we used C-ROK XJ Frams stiffeners to tie into the XJ. you can see them at 9:00 minutes into the video. Thanks for watching.

Awesome video, I am about to buy this bumper and install it myself. Do you know if the lights ever started working? I always worry about putting electronics on an old jeep (mine is a 94) and it glitching out and not working correctly.

@5150MotorSports

4 жыл бұрын

Thanks, not sure if they started working as this Jeep is a friend of ours. I believe they we going to call the manufacture for a replacement lights.

@mikedavis7007

4 жыл бұрын

I'm the friend the guys from 5150 installed the bumpers for. I finally called about the lights. They were really nice. The young lady that worked with me explained they usually only give 30 days on the lights. I told I was a dummy and she said she would go ahead and send them out today.

is 5150 a van halen reference ?

@5150MotorSports

2 жыл бұрын

👍

Nice video...where di d you buy that reinforce bracket for the steering pump?

@5150MotorSports

4 жыл бұрын

Thanks for watching, I believe it was a C-Rock that I’ve had for a few years.

@jerryhaynes9571

4 жыл бұрын

@@5150MotorSports Was there a specific part number for the bracket and would you happen to remember the cost? A link to the item would be great if possible. Thanks

@5150MotorSports

4 жыл бұрын

Hi Jerry, C-Rock now offer 2 kits, left and right reinforcing kits, minimum I would do drivers since the steering box mounts to that plate and if you have the budget I go with both left and right this will reinforce the front bumper also. Driverside $99.00 Both Driver and Passenger $170.00 www.c-rok4x4.com/c-rok-online-store/C-ROK-Cherokee-XJ-Durango-Reinforcing-Frame-Kit-p38115458 Thanks, Dean

@jerryhaynes9571

4 жыл бұрын

@@5150MotorSports Hey Dean, thank you for the response and link. I ordered the left and right side set for $170.

@jamesperalta6361

3 жыл бұрын

You can get them on Dirtbound offroad for $30 for both sides.

How is it holding up and have you actually used it hard????

@5150MotorSports

3 жыл бұрын

Holding up great, no issues.

Where can I get this bumper

@5150MotorSports

4 жыл бұрын

Hi Jeep XJ, Amazon has them beleo is a link, Thanks for watching. www.amazon.com/EAG-Off-Road-Bumper-1983-2001-Cherokee/dp/B0797FBYJ6/ref=sr_1_1_sspa?crid=23VA6X2HSH1SN&dchild=1&keywords=eag+front+bumper+XJ&qid=1590535196&sprefix=EAG+front+%2Caps%2C198&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyV1haNFlCQTg1TVROJmVuY3J5cHRlZElkPUEwMTA5MDIyM0o4N0VLU1daM1c3OSZlbmNyeXB0ZWRBZElkPUEwMDI0ODgxMlhRQUMwTUdRUVdKRyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

How far out from the grill does the bumper go?

@5150MotorSports

4 жыл бұрын

Christopher Spencer we don’t have the Jeep here as it was a friend of ours, when I see it again I’ll take a measurement. My guess would be around 10-12”.

@ninja63639

4 жыл бұрын

@@5150MotorSports Oh ok. I appreciate you getting back to me anyway. I've been trying to figure this out for a few months now

@mikedavis7007

4 жыл бұрын

Hi Christopher the bumper is 8 1/2 inches but the brush bar and the D- ring mounts are 10 1/2 inches out from the grill.

@ninja63639

4 жыл бұрын

@@mikedavis7007 Hey I appreciate you getting back to me. Thank you so much

@mikedavis7007

4 жыл бұрын

No problem sorry it took so long.

Can you jump up and down on it sturdy or Chinese junk

@5150MotorSports

3 жыл бұрын

Bumper is very stout!!!