just wanted to say I've been doing a over hall on my xj. from rear main seal oil pump to freeze plugs gaskets and new trans and rebuild tc breaks front and back with new lines in my garage. I have a jcr front bumper and rough country lift with new A arms and spring packs waiting to go on but anyways amongst all this rambling about my self I wanted to say thank you so much. you all have been there the whole time. im not a mechanic so you all made a lot of this possible. your my first and only go to. please keep doing what you all do. We all appreciate it. thank you!!!

@bleepinjeep

8 жыл бұрын

+josh miller glad to hear it man, thanks for watching!

@gavinfrost3131

7 жыл бұрын

BleepinJeep we are in the process of welding mine together and jcr did not send me spacers?

that final touch at the end really is the cherry on the cake!!

Third row seating! Cool!

Tailgater combobulator!

@dre04mach

6 жыл бұрын

That needs to go up for sale on bleepingjeep.com :D

@aaronheckman7563

5 жыл бұрын

I have it.

I want to get an older XJ like this one and get a JCR bumper. Looks amazing!

Matt, That horn is made by Sparton and we had a lot of them fail. I finally got Bob Lutz to tell the product planners (he hated them anyhow) to go with a better horn. They would come into the plant full of water as Sparton instead of making them "just-in-time" as they were supposed to do the just built a whole bunch of them and stored them on palettes mouth up outside. The plant guys in Toledo would complain because they leaked all over the plant floor making it slippery. You need to make sure that the horn mouth faces down and is not in a splash area.

you crack me up dude, great vid,

what's with the sword?

Definitely put that piece of door edge on the bottom..That will rot fast at that point.Good video..I am now on my 2nd Grand C Laredo..Love the 5.2 power.

Gonna need to post some design's or blue print's or make a video on how to build the combobulator, just sayin that thing is awesome

Love the invention. Keep the videos coming.

I love your videos man, super informative, probably the best XJ content on yt. But what's that hat action going on at 7:05 lmao

The Tailgater Combobulator! haha

lmao the tail gater combobulator

hahaha i laughed so hard at the end!

Hey Matt i have 93 cherokee just like this one. I was looking for my horn one day on my cherokee and i took off my vacuum canister. I snapped the hose when took it off, but i replaced it. right when that happened i realized that i couldn't adjust my A/C vents anymore. So my A/C is stuck in then Front and rear defrost position. I checked to see if i was getting any suction out of my vacuum hose and i am. I am wondering if i broke the canister. Do you know if the canister has anything to do with the A/C vents? if so how can i test the canister to see if i broke it?

I want that trailer hitch chair thing.

You should make a video on your new jeep. Tell us about it. What year and mods.

I took my original bumper off my 98 xj and there is a wire in front of the body.. Would like to know what is it for? I see there is one on this video.. Thanks!

What tool do you recommend using? That will be the most precise and cutting the fenders/bumper for a larger wheels? I want to make it as clean as possible. Also, What’s the tool “method” you used to cut the bumper? Some kind of orbital saw cutting tool but I forget the name of it. Thanks Matt! -Fletch

it would be fun to drive down the road sitting on your hitch seat

i love your videos i'm literally in tears from laughing at the end lol

I have several JCR products and generally like them but since I already had a C-Rok drive side tie-in I asked JCR if I could just buy the passenger side (building my own bumper). They said no. C-Rok had no problem selling me just the passenger side.

I'm getting ready to install my bumper today. I wish JCR made a notch in the larger brackets that run along the frame so you didn't have to cut the support for the front of the fender. If they made a little cut out, you could leave it there. I know as soon as I cut my bracket, some ass is going to bump the front of the fender and bend it all up.

@kletterman

10 жыл бұрын

bleepinjeep I just used an angle bracket. You also said you moved your vacuum bottle into the engine bay. Where did it end up? Mine in temporarily zip tied under the fender, but I don't have any space inside for the bottle. Customizing is fun! hahahahaha

Very nice.

That's a nice bumper! Looks Good!

I want a tailgater combobulator!

i love that seat

Haha are you gunna actually use that seat and grill thing u attached ..... Kinda cool if ur just seating around a campfire with it

hey quick question. will pre-97 bumper end caps fit on a 98 bumper? with a little fabrication maybe?

Would installing one of these bumpers effect the airbags in the newer models?

really wish he would at least put the link to the specific product on each video, also there no video on the wheels and tires and the installation and what kind of wheels they are and ive been looking and havent found anything and im looking to do a build like this on my 94 xj

I need to know where to buy the combobulater!!! 😂

when are you producing your tailgater combobulators for sale?!

Nice and easy

I'd like one for my jeep- good tutorial!

You know where i can get those un reinforcement brackets for the bumper? (Ya know for less than $98)

I don't know if this is normal but I ordered a t case skid from jcr over ten days ago. I haven't got an order confirmation or shipping confirmation. Sent two e mails with no response. The money was taken out of my account. Maybe they don't like people from the west coast?? If you have any feedback on why this is happening with jcr that would be great. I really like their skid, so I would hate (Yuuuuuuup) to go through a different company.

Bolt sizes?

It's gonna blow!

nice hats lol great video too

Yiu need to mass produce that tailgater combobulater

i was wondering does your website sell blinker fluid im all out?

@X-R-P

10 жыл бұрын

be sure to stock up on the blinker fluid ill be purchasing some my blinker flash has slowed down due to lack of fluid :) lol

@TexasRedneck

10 жыл бұрын

RedneckSpecialForces I like to use synthetic blinker fluid, I feel like the blinkers really enjoy this type of fluid the best.

@X-R-P

10 жыл бұрын

ooh ill have to try that out thank you for the new idea

I have a very specific question, haha. I was in a wreck and it pushed my aftermarket bumper back a little bit and it bent the bolts and tore up the mounting brackets. If I used these, could I just cut off the factory mounting brackets and use them as an alternative? Also, would welding them on be stronger than the bolts? bleepinjeep

@kyle.2344

10 жыл бұрын

the jeep, the bumper is perfectly fine

Hey Bleepin, this is my second question from your videos, plan on getting a JCR winch bumper but wondering on finish. Powdercoat being the best, but what did you use? I see some just using rattle cans.

@bleepinjeep

9 жыл бұрын

I've got a video on my painting technique. You should check it out. It's just spray paint.

Matt, I've got a 98 Cherokee and looking to do a lift and add a new bumper any tips on a short budget? I'm in Knoxville so if ya got anything layin around you wanna sell for a good price that would be awesome too lol. Love your videos!!

@stafford0618

10 жыл бұрын

Will do and again appreciate all the videos.

Did he say "muffler bearings"?

@99jeepxjguy97

3 жыл бұрын

Yes.

wen r you going to commercially distribute the tailgator combobulator? or do a diy video on it?

@bleepinjeep

8 жыл бұрын

I never used it and gave it away... now that my fab skills are better maybe I should make another.

@zizo_tf2

8 жыл бұрын

PLESE MAKE A VIDEO ON IT

lol the ending... Matt just couldn't stand that the stove wasn't working right.

How. Did. You. Make. That. There's a drive-in theater where I live, and I *NEED* one of those.

@bleepinjeep

6 жыл бұрын

magic sauce

how many jeeps do you have all together if you dont mind me asking, just out of curiosity

@robertbaker6296

10 жыл бұрын

oh ok thanks i don't have any.. right now anyway:(

@WhiskeysPaw

10 жыл бұрын

bleepinjeep What year is this new XJ?

What kinda steering stabilizer is that? Is that a return to center stabilizer? Priced shipped for one tailgater combobulator?

@Crushercurtis702

10 жыл бұрын

bleepinjeep Take a look at that stabilizer, I could have sworn I saw a spring on it.

@ThePizzaGuy1396

10 жыл бұрын

Jay C its a shock boot

What's your suggestion for mounting a bumper that is not wide enough to fit around the brackets? May just need to buy the steering box spacer than just weld reinforcements all over the area, I can't relocate the bumper mounts on the Rusty's pre-runner bumper I have easily at all....annoying...didn't think of reinforcing this spot before i chose what bumper to buy...

@CRF450Rider585

9 жыл бұрын

Jeff W P.S Thanks for the vids mate, I appreciate what your doing.

@bleepinjeep

9 жыл бұрын

i have thought about this too, i think it would be possible to cut the jcr mounts and weld them directly to your bumper.

@CRF450Rider585

9 жыл бұрын

BleepinJeep Yeah, I decided to cut the front three holes off the jcr bracket and just butt weld the jcr bracket to the bumper mount. It turned out i only needed to do this to the passenger side, the drivers side i just bolted it on and it just. All is good and strong now!

I wish my vacuum canister only had one line hehe.

Clearly Matt spent his budget on the special effects :) Does JCR sponsor you? Cool if they do, they seem like a good company, where I'm planning on buying from eventually, so these vids will be a help.

Where did you relocate the vacuum canister? I’m looking to do this for my cherokee and I want to see where I can put it

@bleepinjeep

4 жыл бұрын

just up in the engine bay anywhere

@dakotagist7526

4 жыл бұрын

BleepinJeep I’m indecisive where lol, what do you think it would rattle the least? Where did YOU put it?

@bleepinjeep

4 жыл бұрын

@@dakotagist7526 I dont remember, just screw it to the firewall or the inner fender near the battery somewhere

@angelovelazquez5551

4 жыл бұрын

I just left my canister in the same area.. Just used a free empty hole that was in the bracket that holds the fender and zip tied the other hole around the bracket. 👌

@dakotagist7526

4 жыл бұрын

Angelo Velazquez thanks lol, about to get one of these bumpers soon

Why does this jeep have 8 grill slots...?

Hey I have a 87 jeep Cherokee 5 speed and need to change the front end axle what year can fit it

wtf.. I want a tailgater combobilator..

why wont you try some videos on 2002 jeep liberty?

@peepawchance5786

8 жыл бұрын

probably because he doesn't have one and nobody off-road's with jeep liberty's

@Halsafe

7 жыл бұрын

Haha!!

@ethanjones3482

7 жыл бұрын

there's actually a guy in my local club that has a liberty with tons and a 4.0

how much $ is this

obviously it would be easier with a second person.... or some blocks

what's the exact make and model?

@ironicchannelname6457

6 жыл бұрын

Ethan the Hoonigan its a jeep Cherokee country

TIL: I did not know that I needed a front row bench seat.

Who's jeep is that? You get other one?

wish we could get this stuff in Canada without it costing an arm and a leg :(

@SUUUUURGE

10 жыл бұрын

Depending on where you are, and your passport status, you should see about joining a Jeep club just over the border. If you can get stuff shipped to another member, you're good. I'm about to get my passport simply because every D44 I find is in Quebec.

@egibson2266

10 жыл бұрын

no kidding eh. that's a pretty original idea! problem is that I live on Vancouver island, which complicates things even more with a $75.00 ticket each way to take the ferry...

@egibson2266

10 жыл бұрын

***** wow, sorry to hear that man! guess you must have some pretty committed guys if its costing that.

I recently bought a jeep without a front bumper......I wonder where my vacuum thing is

@bleepinjeep

7 жыл бұрын

they might have tossed it.

@Catfish2255

7 жыл бұрын

Somebody told them that it sucked..So they threw it away...

HAHA coool!dud

Nice video, but you special effects weren't so special.