Just ordered mine.. can't wait.. great video!

Thank you for a very informative video. Will get the new Bixpy K1 model for my Outback soon.

got myself a bixpy. the only con i would say about the bixpy is the connector: i don't like how the connector nut doesn't twist enough. doens't feel reassuring but first trip with it and had no issue but still that part could be an improvement.

Now see? The audio on this video is perfect!

Nice video and review. I wonder how much % of speed you'd gain by bringing up the mirage drive when using the Bixpy?

@CornishKayakAngler

Жыл бұрын

Thanks Doug. I did think the same after getting off the water. Although I’d have needed to take the Mirage Drive Cassette Plug with me to block the hole as the open well causes a fair bit of drag on it’s own. I’ll have to give it a go another time and report back 😀

I love my PA-12, and i upgraded to the PP 768 J2 BIXPY. When it arrives you need nothing. That's why i love the Bixpy. A 12ft boat, with fins, your paddle, and a Dependable Bixpy, is an amazing setup. I love my tournaments, and covering water. You can always purchase a spare bixpy battery, and you're never going to run out of power, and you'd still be at 17 lbs maximum. They link to your motor via Bluetooth. Awesome set-up. 🛶 🎣 🌊

Curious if the loader works with the mount installed? Or would you need to remove the mount from the kayak?

@CornishKayakAngler

Жыл бұрын

I tried this last week and the loader still works fine with the mount in place 🤟🏻

Sounds like an outboard!

Did that mounting bracket come as part of the outboard kit or was it extra?

@CornishKayakAngler

Жыл бұрын

It comes as part of the adaptor kit. All explained in the video 😀

@Hamiltime

Жыл бұрын

@@CornishKayakAngler I watched the whole video, I just wasn’t sure if that was purchased separately or not. It wasn’t one of the items you showed came with the box. I ask cause I passed up a huge deal for $700 brand new in box for the outboard kit. I went another route cause I thought the mounting bracket was not included… I may have made a huge mistake lol. Great video man. Keep it up!

@natehine8541

Жыл бұрын

@@Hamiltime you can mount on a rudder if you have one

When I look at the website I can only see K-1 model. I don’t see J-2

Fabulous and very detailed video on the Bixpy for the Outback. After watching many videos yours was by far the most informative and detailed. Many thanks for sharing. I have been considering buying one for my outback and after watching your video I’m now convinced. I was wondering weather the rear mount would be an issue when unloading and would it bottom out before the hobie rudder protector. I’d prefer the rear mount to the mirage mount……What are your thoughts as I see you have both. Cheers and thanks again

@CornishKayakAngler

Жыл бұрын

Thanks George, I really appreciate the feedback. I tried the Outback Loader with the Bixpy mount fitted and the loader still clips on fine and can be used as normal. I have some photos for reference if you need to see them but have no way of adding them to the comments here! I’m on FB as ‘Cornish Kayak Angler - Kayak Fishing Blog’ if you wanted to get in touch for the photos 👍🏻

@CornishKayakAngler

Жыл бұрын

Oh, and rear mount is better in my opinion as you can then use the drive at the same time with the motor providing assistance.

@georgemarchesi8506

Жыл бұрын

@@CornishKayakAngler Thanks for your reply. Am now following you on FB……. Plenty of great pics 👍Cheers

I thought you can replace the mirage drive with the motor. How does that work? Also, I hope you noticed Andrew is not being towed towards the end of the video 😜 hope he is safe.

@CornishKayakAngler

Жыл бұрын

I run through the mirage drive adaptor in my next video so keep an eye out for that soon 😎 Andrew was towed back to shore safe and sound with 1 bar of battery still remaining 😂

@houseofvelma5

Жыл бұрын

@@CornishKayakAngler Definitely looking forward to that video! This one was really helpful and much more in-depth than any of the others on the Bixpy. Thanks! I have a Passport, and my only option would be the mirage drive adaptor. Given that I tend to overestimate the amount of peddling I can reasonably do in a single session, I tend to go much farther than I ought to (comfortably) and suffer on the return. Oops! 🤣 This will be a great option!

@mrsamsebastian

Жыл бұрын

@@CornishKayakAngler yeah man keep the videos coming. Great stuff!

When you drop the motor and ot doesn't click in. All you have to do is put it in forward 2 or 3 clicks and it'll lock right in. Don't have to use the paddle

@CornishKayakAngler

Жыл бұрын

Yep tried that. Even on full speed it wouldn’t click in. Maybe the clip loosens up after a little bit and then it will do it under motor power?

How much is this??

@CornishKayakAngler

Жыл бұрын

The current UK price for the Bixpy J-2 Outboard Motor Kit is £1299. Adaptor prices vary. Loads of info here: www.cornwall-canoes.co.uk/bixpy.htm

Bro try torqeedo it’s much faster even with the smaller motor 403 can you imagine with 1103 half trottle on 1103 is your full paddle with your full bixpy trust.

@CornishKayakAngler

3 ай бұрын

Yeah I’ve seen the 1103, it’s a beast! Probably too powerful for my Revolution 16 and even half throttle on my Outback would be more than enough. The 403 is a nice sized piece of kit. Expensive here in the UK though! If speed is not the priority then Bixpy is a good option and more cost effective here.

@fadhilfadhil2200

3 ай бұрын

Yup I agree nice videos

£1200 and you have to use a paddle to click it in 😂😂

@CornishKayakAngler

Жыл бұрын

Yep! Some people saying it pushes in under forwards motor power. Maybe I just have a tough clip 🧐 I’m sure there could be a better way to keep the pole down though.

Not very good idea that would annoy me having to keep pushing that with the paddle

@CornishKayakAngler

Жыл бұрын

In theory you’d only have to push it once when first launching, it really wasn’t much faff at all. But yeah it would be cool if they had a better way to lock it down in place. Perhaps a second line to pull and cleat off?

@jemarquezg

Жыл бұрын

Bixpy says you could just lower it down and turn it on and it would lock itself into place again, hope you can give it a try.

@CornishKayakAngler

Жыл бұрын

Yeah I tried but it didn’t clip in even at full speed. A push with the paddle was quick and easy enough.

@workmanzachary6112

Жыл бұрын

Mine clicks right in usually at 2 or 3 clicks forward..

@usermiamiusa

Жыл бұрын

i have same mount on oldtwon pdl 120 and i have to push with the paddle too, but not big deal