INK-ing ONE direct drive rotary tattoo machine
Ғылым және технология
INK-ing ONE
- direct drive rotary tattoo machine
- adjustable give for cartridges
- Faulhaber motor
- made of anodized aluminium and brass
- weight 80 g, very low vibrations
- can be used with plain needles
- can be used with a power bank (5 volts)
Пікірлер: 173
I love tattoo machines, no mater how modern or fancy they get everyone needs a old school elastic band.
@aceadam1828
5 жыл бұрын
crackedoutclown not really. Inkmachines have a stabilisation wheel. All pen machines need no rubber bands and there arevquite some moremoptions without them. Anyway tattoo machines are beautiful i have to agree
I got the dragonhawk extreme 2 and one that looks like the one here and another one and 5 coil guns 7 in all they all work fine the rotory is so smooth its like drawing with a pin
Center of gravity depends on the grip. If you change the grip with another one it can start leaning either way. That is not really important, but since you make a point..
@slavatattookg
6 жыл бұрын
Of course it depends. This is the smallest adjustable grip. If you use bigger, he can pull it forward, not back, so that's not a problem (can't pull it down to because of the armrest) It is important if you tattooing in an upright position, if the machine is heavy, it can pull backward, which can cause finger or wrist pain after several hours of tattooing :-)
@SoturinTie
6 жыл бұрын
I'm with rotaries for some time and I'll never go back to coils mainly because they are heavy. After 5 (very often even more) hours of tattooing I really start to feel pain in my index finger. The so called armrest (fingerrest) is just a constructional element. I don't think you made it intentionally. Pen machines have no fingerrests whatsoever and they are still comfortable. I don't want to say your machine is not good. I bet it is and probably would love to use one since is light, noiseless and well balanced.
@slavatattookg
6 жыл бұрын
That extension on the back is made for a reason, it does not have to be there at all (it could have been just one screw). With the pen machine I miss a finger rest when I keep it upright (especially when I tattooing on someone's back, I hope you understand what I mean), since its lower part is much lighter than the part where motor is. And also on this machine is good that the give can be adjusted very easily., that is its main characteristic. You should try it :-) Otherwise, I use and make rotarys for 18 years (coils to).
@jeremypaul9631
6 жыл бұрын
Hi I gmail u please check
@jotattoo1
6 жыл бұрын
what motor can you please tell me what model and exactly
Nice machine brotha 👌🏼
@slavatattookg
6 жыл бұрын
Alex Tatt2s Thank you very much :-)
Bom dia!!! Você poderia me informar aonde eu encontro está máquina? Obrigado!
Can you do a demonstration with plain needles. And how the give mechanisms works thanks
Thats a beautiful machine.
@slavatattookg
6 жыл бұрын
Lostsoul Sound Alchemy thank you very much
This machine with RCA + Hood would be one of the best machine
beauty is changing the splendor - a nice machine
@slavatattookg
6 жыл бұрын
Petr Cz thank you :-)
@johnneeson9210
4 жыл бұрын
slavatattookg how can I buy one of those machines
Subbed and emailed you.. Would love to see these machines distributed by our friends in the supply end of the business
Es una obra de Arte 🤠🤠🤠
@slavatattookg
6 жыл бұрын
Mad Maikel Muchas Gracias :-)
where i can buy it
Ive used a tattoo machine before on my friend and what i hate about it was that i cant even pass a line without it stopping getting snag on the skin. I don't know the term for that but i would prefer a machine that can perform a steady speed. I don't know much about tattoo guns but i draw a lot and trying to take the tattoo route. Any recommendations for a good starter machine? Something thats solid. Thanks✌️👍
@slavatattookg
3 жыл бұрын
hi, what type of machine did you use, coil or rotary?
What's the practice skin your using and where can you get them? Thanks
@slavatattookg
6 жыл бұрын
Hi, read all comments here: kzread.info/dash/bejne/lKudmcObadKbqKQ.html , I explained it there. Best regards
Hey what material are you using to shade on? Is it like poster board?? Or..... Honest question I am beginning tattooing and I want to practice as much as possible before actually doing a piece on someone
@slavatattookg
4 жыл бұрын
Hi, it's a pvc floor, back side, cleaned with alcohol
@ozz3131
4 жыл бұрын
@@slavatattookg thank you 🙏
@slavatattookg
4 жыл бұрын
@@ozz3131 you are welcome 🙂
cuanto cuesta esta maquina esta increible
Im going to have wet dreams because of this machine
Is there a retailer that sells these?
This machines are the best.. When i was 16 years old.. I did my own machine.. Home made tattoo machine
@bm2555
5 жыл бұрын
Who cares?
Where could I order one in the U.S.A
Does it come with a charger or cord
how can i order one of this
I want that power bank, can you please tell me Where will I get it ?
Does the adjustable mechanism fall of when you take the grip off?
@slavatattookg
5 жыл бұрын
Hi, no, it's one part
Looks very nice
@slavatattookg
5 жыл бұрын
Thank you very much :-)
@nomercy5422
5 жыл бұрын
I was planing on buying one of these rotary tattoo machine . Is it a good buy ?
donde encuetro essa maquina
Hello... Compliment for the give sistem! Is possible to have only the bar?
@slavatattookg
5 жыл бұрын
Hi, thank you, yes it's possible, contact me at saledm@gmail.com about details , best regards
I rather coils, but thanks !
It is just for practice or it work on skin too?
@slavatattookg
4 жыл бұрын
This is a real tattoo machine, of course it works on the skin as well :-)
Balance depends on grip too
@slavatattookg
3 жыл бұрын
Of course it depends. This is the smallest adjustable grip. If you use bigger, grip can pull machine forward, not back, so that's not a problem (can't pull it down, because of the machine finger rest)
beautiful
@slavatattookg
Жыл бұрын
Thank you :-)
Amazing bro,how much,ship to Brasil?
@slavatattookg
6 жыл бұрын
hi, please contact me at saledm@gmail.com
Very nice..
@slavatattookg
6 жыл бұрын
tshering sherpa thanks :-)
Where can I buy one of these machines
Left hand!!
@sirlisbarriows5324
4 жыл бұрын
basila tatuaje
How much is this machine
I send you an email, I’m really interested !!
What is that battery
I’ve been looking for it online. Where do you buy it?
@slavatattookg
6 жыл бұрын
I made this tattoo machine. For more details, please mail to saledm@gmail.com. Best regards
I was trying to get the price for one of the rotaries.
@slavatattookg
6 жыл бұрын
Shannon Wilson hi, please contact me at saledm@gmail.com. Best regards
where does one purchase such a delicious item?
@slavatattookg
5 жыл бұрын
hi, please contact me at saledm@gmail.com. best regards
how much this one
i want this one ❤️
@slavatattookg
3 жыл бұрын
Hi, please contact me at saledm@gmail.com about details, best regards
How can I buy this please
Que material é esse que você está tatuando ?
@slavatattookg
4 жыл бұрын
Hi, it's a pvc floor (linoleum), back side, cleaned with alcohol
I want to buy a tatto machine . But i dnt know which is best ... coil or rotary .
@slavatattookg
4 жыл бұрын
Hi, I think rotary machines are better, less vibrations, less weight, and very quiet, also more universal, you can do everything with only one machine
I would like to know the price I liked a lot 👌✍✍
@slavatattookg
6 жыл бұрын
Andres Gomez hi, please contact me at saledm@gmail.com about machine. Best regards
Nice
@slavatattookg
2 жыл бұрын
Thanks 🙂
Ước. Mơ được 1 cái
Сколько стоит такая ?
Can i buy one of these?? You ship to the U.S?
@slavatattookg
6 жыл бұрын
Ryan Blackowiak Hi, yes, I can send machine to USA. Please contact me at saledm@gmail.com about details. Best regards
Where i can buy this kind of machine?
@Mario-nd3cr
5 жыл бұрын
Exactly!! he don't even say where???
What is the cost og this machine? Anf from where can i get it?
@slavatattookg
5 жыл бұрын
Hi, please contact me at saledm@gmail.com, best regards
Like tsttoo
Where can i buy one of these?!
@slavatattookg
5 жыл бұрын
Hi, please contact me at saledm@gmail.com about details, best regards
How much ?
Check this out homies, a suped up homemade tattoo gun .
Haw to bey it my friend
@slavatattookg
5 жыл бұрын
Hi, please contact me at saledm@gmail.com, best regards
Do you sale them
@slavatattookg
6 жыл бұрын
hi, yes, please contact me at saledm@gmail.com
@anthonycarter7181
6 жыл бұрын
how much?
@chaeolina
5 жыл бұрын
@@slavatattookg 😂
in what material are you tattooing?
@slavatattookg
5 жыл бұрын
hi, this is pvc floor, back side, best regards
@dante_gonal
5 жыл бұрын
For practice?
@slavatattookg
5 жыл бұрын
@@dante_gonal yes, you can practice on it
Nice macchine... how much and where to Buy?
@slavatattookg
3 жыл бұрын
Hi, please contact me at saledm@gmail.com about details, best regards
Hey... where can i buy one of these?
@slavatattookg
6 жыл бұрын
don bod HI, I sold out all machines, I'm waiting for new motors from supplier. I can notify you when they arrive. If you want to know something particular, don't hesitate to ask. Best regards, Slava
@michaelsynod271
4 жыл бұрын
Can I purchase the pushrod from you?
Que precio tiene esa máquina me interesa adquirir una
@slavatattookg
Жыл бұрын
hi, please contact me at saledm@gmail.com about details. best regards
how much? where can i order?
@slavatattookg
6 жыл бұрын
Scooby Miranda hi, please contact me at saledm@gmail.com. Best regards
😲
Im interested, info please! Thanks
@slavatattookg
3 жыл бұрын
hi, please contact me at saledm@gmail.com
Are these still around??
@slavatattookg
3 жыл бұрын
Hi, yes, but I have new version with brushless motor and better mechanism for adjusting give. For more information please contact me at saledm@gmail.com. Best regards
Powerbank 🤔? Volt?
@slavatattookg
5 жыл бұрын
5 volts. Soon I will make a device that will be able to continuously change the voltage on the power bank
@isjutjetztduspast382
5 жыл бұрын
slavatattookg 👍🏼
How much
We’re can I get one
@slavatattookg
Жыл бұрын
please contact me at saledm@gmail.com about details. best regards
Hi how can I get one?
@slavatattookg
6 жыл бұрын
Jeremy Paul hi, please contact me at saledm@gmail.com about all details
Where can I purchase?
@slavatattookg
6 жыл бұрын
I sold out all machines, I'm waiting for new motors from supplier. I can notify you when they arrive. If you want to know something particular, don't hesitate to ask. Best regards, Slava
Where I get one an how much
@slavatattookg
6 жыл бұрын
Clint and Crystal Lucas hi, please contact me at saledm@gmail.com about details.
Price with rca?
@slavatattookg
6 жыл бұрын
heppukepu hi, please contact me at saledm@gmail.com. Best regards
окай
акцент странный
Valor para Brazil
@jorgeantunew4124
6 жыл бұрын
Marcelo Conceicao kkkk
Where can i buy 1
@slavatattookg
5 жыл бұрын
Hi, please contact me at saledm@gmail.com about details. Best regards
Is it for sale ?
@slavatattookg
6 жыл бұрын
hi, yes, for more info contact me at saledm@gmail.com
Wow so many people can’t read the comments.. who makes the machine.. where can I get it .. Will it make me tattoo like G … how do you put Petrol in or is it a steam powered gun 😂
Still for sale?
@slavatattookg
6 жыл бұрын
Nolan Ryan yes, I can make you one, for details contact me at saledm@gmail.com
Rca?
@slavatattookg
6 жыл бұрын
kirill29cri yes, I can make RCA version
I just sent you an email
Shit lol that's what we had in prison we made them wow copying the penitentiary tattoo homemade tattoo machines lol
Message me I want one
@freddycurbelo
5 жыл бұрын
fatkat702 what’s the link ?? I want one . And do you sell the needle bar adjustable spring ??
@freddycurbelo
5 жыл бұрын
Do you have a website ??
@pabitramauka7801
2 жыл бұрын
Hhnh
@STY-HVY
2 жыл бұрын
@@freddycurbelo 3rdwishtattoo
RCA clip cord we dont like it animore a lot of people will not buy this machine because it has clipcord change it with RCA is better
@slavatattookg
4 жыл бұрын
Hi, I have version with RCA too. Look at my Instagram page @slavatattookg. Best regards
Русский чтоле?
How do we email you provide email address please
@slavatattookg
3 жыл бұрын
Hi, saledm@gmail.com
@josegarza184
3 жыл бұрын
@@slavatattookg sent email
where i can buy it
@slavatattookg
5 жыл бұрын
hi, please contact me at saledm@gmail.com, best regards
How much