GET A FREE 240 PAGE STEP-BY-STEP TINT MANUAL ⬇⬇⬇FREE DOWNLOAD⬇⬇⬇ tintcourse.tintschoolonline.com/tint-manual-youtube/?el=bubbles-in-my-tint

@davidbruno3439

2 жыл бұрын

Can’t access it, keep saying to register but theirs no way to do so, also been wanting to get more info on the payment plan and how it works I know it’s 325 x3 but my question is how soon are the other payments due?

I’ve been in tinting business since 2016 and found that Perfection is never achievable but I try my best to minimise the dirt. I’ve been watching your videos for a long time and found very helpful and I’ve learned so much from you. Thank you 😊

One from the best chanels ever !!! Thank you lot for the videos 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

just got a job tinting car windows my boss recommended your video for training learned a lot.

Great job on that installation 👏🏽👏🏽👏🏽👏🏽

Where To Purchase Quality Window Film? 𝗨𝗡𝗜𝗢𝗡 𝗪𝗜𝗡𝗗𝗢𝗪 𝗙𝗜𝗟𝗠𝗦 𝟭𝟬% 𝗢𝗙𝗙 unionwindowfilms.com/product/10-off-lifetime-membership/

Just started tinting super helpful !!!!

I will keep this in mind

I just started practicing and I've noticed that almost all my windows have some sort of contamination. thank you for the video! hopefully I can figure out what I am doing wrong next time I do tint!

Could you please do a video on tools of the trade? What tools you need and why?

Thank you teacher.

El elemento mas importante “paciencia “

What heat setting would you recommend for heat shrinking the tint?

I took my car to a professional shop but it appears that the owner/most experienced tinter works on the more expensive cars, and their least experienced staff work on the less expensive cars. Tint job on my Mondeo wasn't perfect, but at least they're offering to fix it! I just hope that this time, it'll be done right. Sometimes I'm hesitant to take my car back to the same place if I'm not completely satisfied with their work, because they might make the same mistake again, or worse.

good video

Specially in the windshield sir, there's a random contamination.

So i have a G37 Convertible (2011), and got my windows tinted two days ago by a professional. Checked the rear window the next day to make sure water that was pooled up under the tint dried up. There was a hair that caused a tiny wrinkle. Went back to him to fix it, and when he removed the tint he removed my defogger. Turns out my rear windshield is part of the retractable top assembly and is sold as a whole piece, so this shop will likely have to file an insurance claim. Crappy situation, as if it was done correctly the first time it could have been avoided.

@TintSchoolOnline

2 жыл бұрын

Ouch. Sorry to hear that

Nice video. Your experience shines here. I had my windows tinted 8 days ago at a professional shop. I also had a brow or sun strip across the top of my windshield done and from the time I left the shop the patch of bubbles on the brow have drastically reduced and I haven't said anything because they said any bubbles will go away with time. My question is do you think these two appear to now be single contamination bubbles as you described will go away since it has been 8 days in sunlight, or should I have them fix it? I hate to be that guy but on a brand new black car with a 5% brow it really stands out.

@user-bk6qe9qc9r

11 ай бұрын

If the bubbles dried in there their most likely not coming out

@Wild-Wisdom

11 ай бұрын

@@user-bk6qe9qc9r guess I'll be that guy 🥳

Just had windows done 5 days ago still seeing streaks in my tint. Around 80 to 90 in my area. How long will it take for that to go away?

I see the bubbles inside but not the outside I took my truck to get it tinted I think one of my brothers opened the window

I seen one company mask tape everywhere around window. especially the outside window squeegee n the inside one is taped. all trim molding is taped.

@evananthonybaez

Жыл бұрын

Depending on car there no need to mask take any car unless it has felt

is it ok if the water rolls down in the door? there are electrical wires there right?

@hellsinger

Жыл бұрын

There's a plastic shield w adhesive around the electrical in the car doors so no risk

I have tried downloading the free 240 page manual a few times, but keep getting an error saying unable to connect

@tylersmoot8870

Жыл бұрын

If your looking for more information on the Tint School Onlimce Course don't hesitate to reach out to me. I am a current member with a registered window tinting business. I have been through the course and can answer any questions.

Quick Question: Would you recommend wearing gloves during install to prevent contamination with your fingers or should you just spray your fingers before applying every window?

@TintSchoolOnline

2 жыл бұрын

For this demonstration, we micro-edged the top glass so it meant you could carefully pinch the top side as we were cutting it off with the micro-edged finish. You can spray your fingers it will help. Or install with the “no touch method” but as-long as you are just pinching, the worse case scenario will be 1-2 specs. This particular Audi is quite hard to install so holding the film just meant there would be less chance for any errors

@Mr_Porter

2 жыл бұрын

@@TintSchoolOnline Ok, thanks. Wish me luck 🤞🏽

You cut top edge after applying film? Why?

@TintSchoolOnline

2 жыл бұрын

It’s a microedge finish. Doesn’t leave a gap

quick question so i currently have 15% on the front and what i wanna do is put a 5% over the dry 15% will that be able to apply good ? or would i need to redo and take off the 15% and put the 5% and 15% together ?

@TintSchoolOnline

2 жыл бұрын

You can apply over the top, but warranty made be effected But this is going to be far too dark, you won’t even be able to see out.

@al-oo4mg

2 жыл бұрын

@@TintSchoolOnline in day time it’ll be alright but ill probably have to put my windows down at night but that’s what i want that completely blacked out look !

Is it normal do have bubbles after ceramic tinting? My tinter told its normal and will disppear in few days?

@TintSchoolOnline

2 жыл бұрын

Water bubbles are normal, as long as they are see-through. If they are white big bubbles , it will not dry

@newreformationapologetics4953

2 жыл бұрын

@@TintSchoolOnline I got my tint installed 1 1/2 weeks ago and I still have water bubbles. Should I be ok to roll down windows?

@laobe5119

Жыл бұрын

@@newreformationapologetics4953 update

@mamahuevo16

Жыл бұрын

@@laobe5119 bro died

Sir I live in the US Is there anyway I can contact you and send you some tint pictures on my brand new car windows because I have bubbles in my tint and I just need another professionals take on it thanks mate.

Looks so easy but it is extremely hard. Tried it 2 times and way too many mistakes

Is static tint good

@evananthonybaez

Жыл бұрын

No

@edwinbab705

Жыл бұрын

@@evananthonybaez hi

The shop that did my Tesla has a huge HEPA filtration system and they use a plotter/cutter for the tint. Manually cutting tint is never going to be perfect.

@TintSchoolOnline

4 ай бұрын

A plotter cuts a template made from someone’s hand cut. Plotters are amazing though! Many people who use them leave little gaps around the roll down windows though as it’s so quick and easy.

No matter what I do I cannot keep debris out of my windows I have an AC unit blowing directly on top of the car whenever I'm peeling and a small area I keep making it known that the AC is the problem but they will not listen to me

@alekrose4932

2 жыл бұрын

Not only that it's a triple Bay garage door that opens all the time for customers to pull their cars out

@evananthonybaez

Жыл бұрын

Ac has nothing to do with installation of the window film .... it's on how you handing you film and installing the film ... noting with ac

@alekrose4932

Жыл бұрын

@@evananthonybaez I got training from expel! They figured out it was a problem with the water. We now use distilled water and have very little problems

So you’re saying if I push too hard I will leave those dots?

@chaseroyer9405

2 жыл бұрын

Or that I could possibly

@TintSchoolOnline

2 жыл бұрын

"So at first these specs are going to be surrounded with soapy water which makes the specs very hard to see, but as the water dries out though, these specs will become visible" Then it shows me pushing the area a few times to remove as much water as possible REVEALING the specs as I talked about please watch the video again, the whole video talks about specs being contamination and the main reasons of where they come from? Not specs having anything to do with pushing too hard. Tinting is hard, so if this video confused you, honestly I would recommend taking it to a professional

Hi, I recently got my car tinted and I can find Spread Out contamination on all of my windows. Now the detailer is trying to avoid re-tinting by saying that it's because of air dirt, etc. Should I just leave it?

@5444067

7 ай бұрын

No get your money back

@theEVcouple

7 ай бұрын

@@5444067 thanks but it doesn't seem like they're giving my money back. Escalating this issue to Fair trading government.

There is much room for error, my friends.