GET A FREE 240 PAGE STEP-BY-STEP TINT MANUAL ⬇⬇⬇FREE DOWNLOAD⬇⬇⬇ tintcourse.tintschoolonline.com/tint-manual-youtube/?el=bubbles-in-tint

Excellent vid,I thought any imperfections would lead to redoing the tint.I'm doing a rear window and 2 side windows on my car for the first time so this was a great help!!!!👍

Where To Purchase Quality Window Film? 𝗨𝗡𝗜𝗢𝗡 𝗪𝗜𝗡𝗗𝗢𝗪 𝗙𝗜𝗟𝗠𝗦 𝟭𝟬% 𝗢𝗙𝗙 unionwindowfilms.com/product/10-off-lifetime-membership/

Great video. I wish I'd have discovered this channel before pulling the tint I put on my car, especially this content. I could have probably recovered but didn't know it was possible to fix these types of mistakes. Thanks!

You do a great job with this information always helpful.

Thanks for the advice and info recently, the air bubbles on my French doors have dried and gone. The mirror film is working great.. I can feel the reduced heat already with the sun coming out for the last few days. Cheers.

@TintSchoolOnline

4 жыл бұрын

Great! You're a natural if that was first attempt!

Thank you to sharing this knowledge it's very helpful ☺️

I’m here due to a tint job I’ve had done twice now and there are still bubbles and trash in the tint. Looks like I’m fixing it myself. 👍🏽

straight to the point, no bull... great tutorials

@TintSchoolOnline

4 жыл бұрын

Thanks Cam! Appreciated

Thanks very helpful, I will try to remove the bubbles in my window

This is brilliant , thanks mate 👍

Thanks a bunch, saved my day!

Wow!!! Amazing demonstration and lessons. I am encouraged now that my tinter can redo some of these errors that I caught after the curing period. I was so worried that he'd have to peel off everything, but this is genuinely reassuring! I will go to him with a good attitude and ask him nicely to try and repair like you've shown is possible. Thanks!!

@TintSchoolOnline

Жыл бұрын

No problem!!

@Luuuuuuuuuuuuulz

7 ай бұрын

how did that go for you?

@HokageTanjiro

22 күн бұрын

Any update?

Thanks a lot for the great videos!

This video very helpful 👍. Thank you tint school online

Excellent! Very helpful

Like magic!!! Thanks man!!!

Thank you, just had my windows tinted and found some spots like you just showed. Didn’t really want to go back to the same place because of the horrible experience I had. I’m going to try your method and see were it goes. Other wise I’m bringing it back. You gave me hope thou, I think I can do this myself. Thank you.

@Luuuuuuuuuuuuulz

7 ай бұрын

how did it go for you?

Ur the only one out of all these vids who showed the cease and how to remove it

This was hella helpful. Exactly what I needed answered to DIM

@TintSchoolOnline

3 жыл бұрын

Good to hear !

Thank you for share!

One of the best videos I seen yet

Thank you teacher ❤

Thank you teacher.

This is so helpful wow

Nice video dude Thank you for share all of this!

@TintSchoolOnline

4 жыл бұрын

Thank you! Got 100+ more of them inside of our course!

Thanks so much for this video !

@TintSchoolOnline

3 жыл бұрын

No problem! I hope it helps!

Great video! 👍🏻

thank you so much sir for sharing this to us .this can help me in my small business in installing tints. THANK YOU SO MUCH.

@TintSchoolOnline

2 жыл бұрын

No problem! Good luck

📙 Download our FREE 240 PAGE tint manual below. tintcourse.tintschoolonline.com/tint-manual-youtube/?el=bubbles-in-tint

@kieranbrady9750

3 жыл бұрын

Thanks for the tutorials, extremely helpful and well presented! Fan of what you do. Think I know my new side job 👍🏼💪🏼

@thabg007

3 жыл бұрын

i dont have a heat gun, will a hair dryer work?

@AccidentlyParanormal

3 жыл бұрын

I found your video to be very helpful I've never used this particular material before but I watched another video and it implied that I was not as smart as a monkey and it just kind of made me angry I took two steps at your video use the same technique used what you taught me things went fine thank you very much for not insulting me for probably not knowing probably one a very basic thing but you learn as you go have a good day thank you

Vc e o melhor irmão

Thanks for sharing all video bro 👍👍

Happy dayz always watch your vids as not long started window tinting mite had to pop over and do a school with you that way get more off a understand on it happy dayz ay

Thank you for the video. Will you need to apply soupy water when pushing out the air or water not to damage the tint?

Thank you 🤙🏻

What Chizler tool are you using and brand? Great video

Thank you so much

Yeah my rear defrost tint has a rectangular shape now. It's only been a few days though. It does stick out though.

Is the side of the film with the protective film the side that installs on the glass?

This is a great video! very informative, thank you. Do you recommend using this same method with window tint that has been installed for more than 2 weeks?

@CM-qn4io

3 жыл бұрын

...

@mikeriverajr4447

3 жыл бұрын

it depends, if its an air bubble you can pop it But things dont really move when its dry

@11lgt19

2 жыл бұрын

@@mikeriverajr4447 lol kl

@indacouch253

2 жыл бұрын

@@mikeriverajr4447 definitely do not pop it that does nothing even putting the bubble down after popping creates a haze you won’t get rid of

@user-ik8fl2xr5t

Жыл бұрын

Did you find a good solution?

Excellent video. Just a quick question, how long is it before it's too late to correct these defects (bubbles, fingers, etc)? I tinted 2 windows and it got dark so I had to wait until tomorrow morning to see the imperfections for me to correct.

@fantasy-tl3id

Ай бұрын

After 5/7 days

Good info mate 👌👍👍

@TintSchoolOnline

4 жыл бұрын

Appreciate the comment 🙏 any questions we are here !

Very very useful video! Thank you very much! I would only like to ask, whats the time window for these mistakes to be fixable?

@TintSchoolOnline

3 жыл бұрын

Depends on the weather, if its hot it will dry quite quick and the film will be sealed. But the fingers can remove after this period

@555sonap

3 жыл бұрын

@@TintSchoolOnline with a sunny 25°C you would recon it would be fixable in 24 hours??

Thanks

Tank you so much

Excellent

What I do is I push the finger to the end hold it heat the window while still holding it. The let go if it’s small I heat the inside a quick flash and push and it’s out! If you keep doing what he is doing you get more dirt. Then you gotta work the dirt out when it can be on clean step

What temperature is the heat gun set at?

When trying to fix the tint, should u get the tint wet so that the tools slide better?

If you scrape away your tint defrost a line can it be replaced or is it not necessary

Please can you share how you overcome the problems of the "dot matrix"..

What is the brand of your tint tools youre using here? Thanks

Hello,it has been almost 3 weeks from where i got my tint and a finger still appearing in my driver window side...kept on chisling it and still stubborn applying a hair dryer that really heats up the window....

Great

How about water bubble? Will it go away over time? I got a few big water bubble on my windshield tint... And my hands were so itchy to poke the bubble with a needle and shrink it with heat gun and chisel... Will it work that way?

I have got a used car with lots of large bubbles. I was thinking about using a pin, do you think that would work ♥

Is there a fix with no heat gun? I read to just poke a tiny hole in each bubble and use a credit card?

the tint already dried out for almost 2 weeks can i still use that technique for removing specks, will it still work?

.is it safe to do it at the back of the car where is the heater lines?

Can you do this to eight month old tint bubbles.?great video...

@TintSchoolOnline

4 жыл бұрын

Thank you! In reply to 8 month old tint.. I am afraid not...the only option you have is to pop them.. If you want a more accurate answer please send a picture to our facebook page, we will try and assist you! Thank you and be sure to subscribe 🙂 new videos coming soon

I have a rear windshield issue with my 09 Cadillac CTS because the tint is bubbling and looks wrinkling? Would I be able to seal it back down with this method?

Sir I also want to learn from you more

What if after you have done the tint and you squeegy out the water. Then after you check hours later you see a dime sized water bubble... Should you leave it as is so ithe water will eventually evaporate or do you try and push it out knowing that the rest of the film is already tacked down and the water will more than likely NOT push out anywhere else since the window is already squeegied and curing? Poke a small hole in the bubble and squeeze the water out or let it be and when it evaporates then lightly push it down if it hasn't stuck to the window?

Hi we recently had the car windows tinted and 2 weeks later there is still tiny white bubbles on the tint on all windows and the and the edge cutting its not cut evenly and marks around the window edges is so notable , should we get the tint off and go somewhere else not happy with so many marks.

I was wondering can you use automotive tint on a motorhome thanks for the video

@elskankhunt42

3 жыл бұрын

Yep

it is ok now but it can be reduced when you squeez but If it is dust or something in the tint (film) then after few hours it becomes white (white mark )...

Great channel and great content! Currently in a learning process on my own car and am thinking about starting up a business if it goes to plan. Will definitely use your website if it does! Quick question: How much time do you have for fixing these mistakes? In my particular case, I applied my tint 24 hours ago and first noticed the bubbles and specs now. The temp has been around 3-5 C. Thanks!

@TintSchoolOnline

4 жыл бұрын

Hello Kevin, it really depends on the temperature, the amount of soap used and even how it is parked (if it is facing the sun). The bigger the mistake the quicker you will need to be. You can only really tell once you start trying to chizzle the specs(if the air is moving or not). So give it a go and if the air around the spec isn't moving or it is coming back after a minute it will need to be replaced. If it is a bubble, you can pop it with your knife and press the air out that way. Hope this helps and good luck!

Can I use a hair dryer if I don't have a heat gun?

I had little bubbles on the front when the tint guy did the job, he basically told me to wait a couple of more days... can I do this knowing that I don’t have much experience in window tinting since I want to do it myself.

Is there any way to avoid window contour to appear??

Great videos. Should I assume all the work was do right after installation, not the next day when some of these become more obvious.

@TintSchoolOnline

3 жыл бұрын

Hello, not sure I understand. It's harder to see mistakes when the film is wet but if you look really hard you can still see them. Once the film dries everything will look really visible so you need to make sure you check the work really well

Seems like it would be a good idea to wear a head covering or tie hair back to prevent hairs getting in there.

Just seen your video as I have just had a go at tinting my windows and have quite a few "Fingers" as you call them. I did it a couple of days ago. Can i go back to it and try and get rid of the fingers now ??

Can you put the heat gun on the Side where the film is , I can't get access to the other side anymore ,any tips?

what to do if the water fingers keep going back? the shop doesnt want to fix it for me

What brand of heat gun you are using?

very knowledgeable video. i always getting a hair, fiber and contamination bubble. how i can overcome this situation. if you can answer. Thank you

@TintSchoolOnline

2 жыл бұрын

Install is 90% of the problem in most cases. Many people think cleaning. But it's usually install.

@domsim9516

2 жыл бұрын

@@TintSchoolOnline what part being the most common trouble area of the install?

My car's windows were tinted before I got the car. I don't know how long it's been but the tent has started to get wavy as in not bubbles but Just blurry. Would it be the same way to fix it?

Hello Elliot! Do you work with a flat or convex side of the chizler? Yours faithfully, Ivan

@TintSchoolOnline

4 жыл бұрын

Usually the flattest part, unless there is a very stubborn spec

I have some contamination bubbles on the side windows and one crease on my back window very close in size to the one you worked on in the video. Do you think these can be repaired following your methods in the video if it was installed 2 weeks prior?

@TintSchoolOnline

4 жыл бұрын

Hello Michael it is unlikely as the air will be trapped around the contamination with no where to go... sorry

@michaelzeoli3386

4 жыл бұрын

@@TintSchoolOnline Thanks. So these repairs can only be done immediately after installation?

@0n3_0bs3

2 жыл бұрын

I have some air bubbles and it was installed 3 days ago am I able to push them to the edge as you get in the video now

I'm no pro but I have done my own windows and when fingers won't stick or heat and swipe is just pissing me off..I just swipe it down and.then wedge the blade into the window trim pressing down on the finger bubble and leave it for a day and then it usually goes away

I just got a window tint for $200 it's already the next day and I see these weird clear bubbles what should I do?

if a lot of bubble in the middle, can we use this 3 second rule ?

Does this work also when bubbles appear after years?

My tint was done 4 days ago! Is my tint fixable or does it have to be fixed immediately after installation?

Can you roll down your window after 5 days even if you find about 3-4 small specs?

Thank you for the information. My tint is 10 years old and just started getting bubbles in the rear window. I wanted to try and improve it before replacement but, I am guessing this will simply not work for old tint. Could I make a pinhole in the bubble to get the air out? Will that make it look a bit better or possibly make it worse? Great video btw!

@TintSchoolOnline

3 жыл бұрын

Hello, sorry but it sounds like you have adhesive failure. It would need to be replaced.

@quintonpace8854

2 жыл бұрын

Worse

I wish I'd watched this before trying it myself.. Leave it to the professionals! :(

Do you need a chizler to get the specs out or a hard card is fine too.

@TintSchoolOnline

4 жыл бұрын

A chizler is definitely better as it is harder, the 3m cards are quite soft so not as good... Can still be done but will take longer

These videos are so helpful. It would be nice if you maybe sold some sort of kit which would include everything that's needed (except the heat gun obviously).

@TintSchoolOnline

3 жыл бұрын

Hello Sami we will look into it thanks

@garyb4196

2 жыл бұрын

Have a look on ebay mate,I got a kit with squeegees,cloth and a knife for £6.50 and a small bottle of tint slime for £3.99. Also bought a precut tint kit for my car 😊

@user-ik8fl2xr5t

Жыл бұрын

​@@garyb4196hey man did your tint kit fix the issue?

My first time tinting was at dusk and in the morning I found out what every contamination was that he just mentioned... redo

can i do it with regular fan?

Hallo. Make a video how to remove the view doots between the film and the glass. Thanks. Some people they call : matrix heating technic.

So last night I got my windows tinted they all came out great but today I noticed the rear window has 2 small creases/bubble. Can I still do this or would it have to be redone there in the bottom corner

@TintSchoolOnline

4 жыл бұрын

Hello, send a picture to our Facebook page we will take a look

I just had 35% done on my Honda accord, and when I picked it up from the shop the tint had ALLOT of air bubbles on all windows, and I was told it would dissipate. Seeing that really RUINED my whole experience at that shop, and they should never have let the car leave that way... 😔

@bellasal3106

Жыл бұрын

That’s normal, should go away within a day

Ok mate quick question. I don't have any of these when I apply a film except smudges, are they because of soapy water and they will dissappear after specific period of time or i should use just clear water instead? I didn't want to risk leaving the tint so I stripped it straight after

@TintSchoolOnline

3 жыл бұрын

Sounds like it is the drying in process it should all go

Hey guys. I just got my tint done two days ago. I see small specs and 1 water bubble on the rear window. Should I wait at least a week or two to allow the tint to fully dry and settle or should I contact my tint guy?

@Nicojzzz

2 жыл бұрын

How is it now, did it ever get better?

@trishadeniese767

2 жыл бұрын

I got my tints done yesterday and all my windows has bubbles. I’m definitely taking it back to the tint guy

I had bubbles in my tint. I contacted the guy and he removed them like you did, but the tint was all scratched up so he had to remove and apply new tint

@BlastCODM

3 жыл бұрын

Happen to me and now that piece of shit isnt answering

@vq35Davo

3 жыл бұрын

@@BlastCODM 🤣🤣🤣🤣

@josodxgital

3 жыл бұрын

@@BlastCODM Same. Had to do my tint over 3 times already. Now, I have air bubbles and the tint on my passenger side peeled from the top. Sent him pictures and now he doesn’t want to answer.

@RunningBears10

3 жыл бұрын

@@BlastCODM 😂😂

Will a blow dryer be ok to use instead of a heat gun? Cheers.

@brandonjasso3064

Жыл бұрын

No, it doesnt get hot enough

I have a jetta VI and I have got very big bubbles on the back window! I have a question is it OK if I install the film over the window (outside) ? Because pulling the old tint can break the heaters (defrost)! Right! Any suggestions? Thanks

@TintSchoolOnline

3 жыл бұрын

I really wouldn't recommend installing from outside, it will look really bad and won't last very long. You should wait for a really hot day and leave the car in the sun, then try and remove the tint, this way the heatlines are more likely to be saved.

@rs7997

3 жыл бұрын

@@TintSchoolOnline thank you. Even if I break the defrost, I never use it.