Between you and Josh Jones at Podium Archery, I've gotten the courage to get some of these invaluable tools to start working on my own bow instead of driving an hour to my local shop. Keep up the good work, and thank you for breaking a lot of this down for the rest of us!

Duuuuuuuuude, I've had my standard-width VersaCradle for 10 years now!! I love mine, which is why I bought a second one with the wide limbs. It self-tightens just enough to hold the bow in place, but still allow you to make minute adjustments to level the bow.

I’ve been running my hip into one of these in my shop for about a year now, it works awesome. I mounted mine hanging off the bench so you can tilt it down so the string is horizontal and parallel to the front of the bench (with a stabilizer on)

I fix the rest cable on the rest and pass the other end through the cable and then again pass 2 cm higher in the opposite direction. The advantage of this is the ability to quickly adjust the length of the rope without a tool, which is very convenient when setting up the bow.

Glad PJ and Lancaster team sent you our Wide Limb Versa Cradle Bow Vise - it's a game changer. Enjoy @ChrisBeeReal ! 🏹🙌

That's the best bow vise I've ever used! It would be one of the last pieces of equipment I would ever part with for bow tuning. Great choice for sure!

Excited to see when you build out the new bow 😊

This is how you earn respect with your fan base. Good man.

After watching your video I went out and bought one of those bow vices can’t wait to get it!

IVE BEEN WAITING ON QNOTHER VIDEO FROM YOU,I’m getting into bow season this year

Thanks for sharing. That OMP vice is top notch.

Omp is great ive had mine several yrs now but i find myself using the new last chance vise more just because i can swap out from bow to ar in a second but either one is top notch

Man, I want one of those new OMP vices! So much more robust than what I have. Big 💵 though for a vice. Definitely worth the money. Money is just a little harder to come by in 2023. FJB!! Thanks for the Video @Chris Bee

Love the vids keep up the great work chris ❤

Nice unboxing. I love my OMP bow vise!

@ChrisBeeReal Dude, I've been building arrows and working on our bows with you this whole time. Love your videos, keep them coming.. I'm shooting better than I ever have. Must be doing something right... Go team Matthews!!

@ffmedic710

11 ай бұрын

I think it’s the archer and not the brand of bow :)

@melissajames23

11 ай бұрын

@@ffmedic710First off, Thank you!! I cannot disagree with you totally but I do think Matthew's has some of the most comfortable , consistent and top quality bows on the market.. I'm sure that all really helps build confidence on my part... Not to mention Matthews bows are made right here in my home state of Wisconsin so its great supporting my home team..

You can bolt the bow vise under the table so the bow is lower and it's away from table so you can leave the stabilizers on when working on it like the way you did.....that's how I have mine set up

Chris man I can’t tell ya how much I enjoy your content, your ability to get information to the average hunter or consumer in a humble and honest way is truly a pleasure to view. You help so many and your appreciation for animals and archery is why I continue to view your content because you can tell money comes second to your true love for hunting and archery. I’m now becoming a DIY myself and a Mathew’s shooter because I believe in the products and you’ve help so many get excited about archery myself included I’ve grown so much from watching your stuff please continue to be you and don’t deviate! P.S I’d love the opportunity to have you come out to New Hampshire and hunt my estate feel free to reach out!!

the bow vice is what i have at work they are awesome !

I have that bow vise with there 3rd axis sight tool and it’s gets you close to prefect

Just bought the new Last Chance Revolution Vise kit. It's the best vise I've ever worked with.

This guy has helped me learn a lot about bows would like to meet him one day!!!

Great video chris. I lol when you missed the target. That arrow will be in the wall for a while.

I have the OMP bow clamp . Mine must be the old issue . The clamping system is a pain . It keeps coming unthreaded and somewhat difficult to reattach . Glad I have it but it can be a pain

Dialed in my hha tetra lt today 30 minus 30 is zero got new strings so new sight tape great video as always

Whats best flying long range fleching to use with fase4 .. my local shop uses 3 degree blazers is there anything els better

The OMP Micro Tune was the first thing I ever got for my bow shop.

Love the videos Chris

How many feet of workbench do you have total between the 2 benches and your press? Im trying to build up my own shop and want a long enough table to fit everything comfortably.

Great video Brother I absolutely love my Phase 4 copper with be Amazed with it.

Nidio some of her Lancaster archery’s modular archery blocks. Where are you can go all the way to the floor to the ceiling

Get in line pal, been setting mine wrong for years 😂

Auto tighten is not just a cool feature, it is a SAFETY feature, and very important at that because imagine if you forgot to tighten the bow and let go of the handle, your bow might just hit the table or something and you might end up needing a new cam!

@2amendment1960

11 ай бұрын

I have the older version, where you have to constantly "think" to tighten it,, Nothing wrong with old fashioned.

Yes arrows will definitely go through corrugated metal I did that as well I have a nice bullet hole in the sheet 🥳

need to film the caribu hunt

I love my OMP Bow vise!

Wake up boys Chris bee posted 🔥

I was just thinking if you ever miss the target while paper tuning and then it happend lol

Correct me if I’m wrong but I feel like 340 spine on a 28” draw length with 75lb mods would be too light a spine unless shooting a lighter point weight?

Go ahead and pop out that metal clip from the black handle. Ups the performance 10x.

@ryanketcham3383

11 ай бұрын

Explain please

amazing video, greetings from chile👏

When you are marking the knock point on the string, are you marking the center of the arrow? I see it as you are marking the side of the square against the rest and transferring that edge to the string. Then you center the knock/arrow on that line. Does that not make the knock point lower? Or should it be lower anyways?

@chcustombuilds9213

11 ай бұрын

Wondering the same thing.

@Blinkie05

11 ай бұрын

It looked like he had the center of the arrow on the silver mark and he ties the d loop around it. I think it makes the knock point level because if it is too high or low your arrow will have a bad trajectory. I recently watched a seek one video and lee’s d loop moved up which made him shoot low on a buck.

@snonyet

11 ай бұрын

Thought the same, bottom of arrow would be flush with the silver line, right?

@ethan-19

11 ай бұрын

He puts the silver line in the center of the nock

@BrighamWillis

11 ай бұрын

He sat the red thing in the rest and used that as his line guide

Don’t worry bud. I shot our chest freezer IN OUR HOME. Was messing with my daughters release(just playing with it for no reason). Hit right over my target, through my winter coat right into the freezer. 😅

Fancy fancy bow dillio 😂

You should get a Hamskea AroJac arrow puller.

😅😅 good stuff, I can't get mine to bullet hole to save my life. 🤣 looks like I'm lobbing a football w a high tail tear 500 grain 300 spine arrows at 65 lbs 30 inch draw

I have the micro Adjustmen its the best

Should have gotten the Backer Archery products vise… Kyle Douglas even uses it… last chance stole the idea for their new vise from them… it holds the bow by the grip for more security

I’m in need of a vise and was looking at the OMP vises. How about you sell me your old one 😂

i remember when cooper was tiny. jesus time flies.

I was thinking....dude is good if he can always hit that target behind the paper. I would have put it in the wall by now! It's not a bow shop if it doesn't have a few scars!

Just got one of your Beereal grips for my Mathew’s, it honestly helped improved my group sizes by a good amount

@brandonstaley1289

11 ай бұрын

The mind is a very powerful thing

@joshuasanders7805

11 ай бұрын

​@brandonstaley1289 really? You don't think grip has anything to do with that?

Dude...I do tune my bow on the kitchen table lol

I have the micro adjust, and I should’ve returned it. Absolutely not worth it. I worked at a shop that just had the regular one and it’s way more stable.

Cooper shooting 75?! I remember him shooting 45….and a half!

Hello from Maine

Maybe I missed it but how were u setting up ur bows wrong?

@SHREDbro

11 ай бұрын

feel going back to see if i missed something…

Can we start a go fund me to get Chris a real drill😂

Compare bohning x vanes vs heat

Watching the video looks like normal setting up bow.

Yeah I could probably tell that there was something up because the way you shoot

I need someone to build me a new bow. 😂😂

Well Chris……sure wish you could show me HOW to build a bow someday but……..a little slower. 🙂🙂

The bow square was setup to just contact the rest. Then u marked the string where it lines up but shouldn’t that line represent the button of the arrow shaft? I anticipated u putting the bottom of the nock in line with the silver marker line. Instead u put the mark in the center of the nock. Isn’t the arrow technically pointing upward slightly then?

Chris for your apparent struggles😂, as someone born and raised in Lancaster it’s not (Lane-Castor). It’s pronounced Lanc-aster, but not a hard A say it like it’s all one syllable. Keep up the great videos. Cheers

you should start giving away all that cool stuff they send you r

340 axis out of a 75# 28” bow? Crazy

@chasewilliams5731

11 ай бұрын

I thought the same thing. I was thinking 300 would be better for those specs

Wow 🐝 no wonder 🤦🏽‍♂️

Is it just me or is it every Mathews videos build I see, people are having to swap the top hats?

LCA Revolution blows the OMP out of the water.

Can I have the last chance one of you don’t want it anymore haha.

Your setting your arrow wrong with your sharpie mark ,the way your doing it it will be nock low .because that mark you used on the bow square is the the bottom line of the arrow,and the nocks usually have a tapper to them ,and you centered your nock with your sharpie mark,which will be nock low . You can correct it buy lowering the rest ,but that will take you out of center of burger hole.

BAP, Best. Vice. Period. Butch Baker jas it figured out. OMP, meh, better then nothing I reckon.

@BowhuntingSwede

11 ай бұрын

I got the BAP vise too. It’s grabbing the bow by the handle and could be used for rifles also.

Not gonna lie, kinda jealous that Mathew’s bows can’t be sent to just anyone’s home.

Can I have your old vice 😅

You actually don’t want to put mole skin on the rest until after you mount it because when you’re mounting everything on there the bow is shaking and nothing I’m saying is true at all I just wanted to see how many people would argue with me because they didn’t read the entire comment. PS: why does Cooper always have an attitude with you? No “thank you” or anything. Come on buddy!

Please build me a bow.

First

I've been trying to tell you, but you won't listen

@Tradovate.Support

11 ай бұрын

Schlechter Kommentar

@tobymartin3416

11 ай бұрын

​@@Tradovate.Supportno one remembers when you asked

@ludodg

11 ай бұрын

Hello sir. Do you have more info on how you papertune, how you get to that bullethole by moving the arrowrest, and by using the tophatsystem? Reason: i find plenty info on this online but it often contradicts. I would like to know your ideas on this … and also because i appreciate they easy-to-understand way how you explain things in a logical way.

@Tradovate.Support

11 ай бұрын

@@tobymartin3416 gut passt

glad i never followed you.

You title this as you have been doing something technically wrong..

Is it just me or is it every Mathews videos build I see, people are having to swap the top hats?