I feel like this video was made for me and my Phase 4. No one unselfishly puts out the quality content that you do. Thanks Josh

This guy is the mad scientist of compound bows. Love the channel.

Thanks for the video, no one else on KZread has even come close to the info you just gave us. Keep up the awesome work

I have aHoyt RX7 and this Wheel Lean video series is something I have been waiting for for ages....dont think enough people know about this

No way……… ARE THOSE CAMS WITH FREAKING LAZER BEAMS ON THEM!?!?! Looks like somebody needs to sit next to Daddy!! The fact that you are putting out this high level content for ALL of us is awesome! For all of us archery tinkerers this is great stuff. Can’t wait for the next videos to come out. I’m all jacked up on Mountain Dew… waiting for more!! Keep it coming!!

Thank you Josh for taking time to share and helping us

Super helpful! keep up the good work with the tuning series!

Great tips! Thank you so much for sharing these great tips!

Thanks for another very informative video!

Love your videos man👍

Josh, awesome content... I always learn something. Thank you

Great video. Been wanting to start tuning my own bow. Thanks for the knowledge.

I have a matthew's bow and this video was very helpful thanks. Keep making great content.

Thanks Josh. Great video. I couldn't find a video like this explaining how to use the top hats that was this in depth. I thankfully was able to tinker and figure it out the right way! But this is a great confirmation of my efforts and time.

Josh, These are handy.. Especially the part where you state how to correct certain tears in paper compared to what direction you want to move the cam.. At one point in time this was MAGIC to me LOL

Thanks for doing this video. Really help me out understanding the top hat system.

Great information video. I don't have a Matthew's bow but knowing how to work on one is good to know. My closest shop is about an hour away. Knowing how to work on one is a good thing to know. Thank you for all the great information.

Another great video

i ask you to do this 2 years ago , but glade you finally got to making a top hat video,

Love the content. Keep it up

i never thought about limb deflection changing the amount of lean from each spacer. I only thought about the static difference. great tip!

I’ve been waiting for this video for a while. I’ve had some questions about top hat tuning.

Thank you for this video! Very helpful! Surprised by outcome, with each cam having same top hats but opposite sides of cam, but tuned right up. Keep up the good work ,it is very beneficial!

Good explaining on the video Josh, makes things easier to do with less fear of making a major stuff up

Loving these videos, can’t wait for one on PSE! Hope you can cover both the new and old shim system that would be cool. If not it’s understandable.

It would be cool to see this process with the Lift

Really interesting results. I would have thought each change would have produced the same distance. I didn't take into account the possibility of variance of limb load. Thanks for sharing!

Thanks for that Josh, That confirms my decision to go to Bowtech, Among other things.

Very cool and informative video

Love everything you do and more importantly, why you do it! As a long time Mathew’s target shooter the best way I’ve found to tune a Mathew’s, is to buy a bowtech 😂 sorry fan boys but it’s true. To each there own though.

@knaveDave

Жыл бұрын

Truth! I did that exact thing

@jenniferhovda409

Жыл бұрын

Amen brother!! 😂😂

Great video!

I had the exact same thing happen when I did my wheeling about a week ago. One cam was dead nuts, and the other shot the laser just slightly off the side of the other cam. Checked my timing again then shot it through paper and had a perfect bullet hole. This system works

You’re such a cool dude, Josh Jones! Super jealous of the hair, too! I really wish I could pull that off! 😉 But seriously, thanks for all you do! I’ve never even heard of a top hat until now! That could be because I shoot Bowtech, but who’s keeping track, right?! I’ve honestly learned SO much watching your videos! Keep it up! You’re bad ass! 👍🏽

Man that was eye opening you got to say that is easier than traditional shims .

Thanks for the info 👍

This really helps. I’ve been tinkering with my V3X 29 for a weeks and wasn’t sure if I was doing it correctly. But I don’t have that fancy Spot Hogg laser. Guess I need more tools!

Great video. I have a hard time trusting my LCA draw board for doing this, but I think I'll check it out in the draw board to see where my cam lean is.

Great video. Just today I had to flip both my top and bottom top hats on my V3X33. I’m lucky I didn’t have to play the top hat game and go through several to find the right match.

Simply put, this is the best information I've ever seen regarding Mathews bows and the tophat system. Can't thank you enough. Though I shoot an Elite bow, I occasionally help Mathews' owners set up their bows. Good stuff, thanks.

Would have liked to see you shoot through paper along side the cam moves..To watch the L-R tear change. Nice job though!

The Best shim design on the market,takes no time to swap!!!!

awesome vid thanks for sharing

Thanks for sharing your Intel! I wish I lived closer, I have a new Nexus 2 that I can't get tuned... 😢

Could tune Bowtech in 5 min lol This is way to much work to tune a bow Thanks for all your info and videos

Learn something every video. Sub'd and thank you.

Awesome information MFJJ

I think the give away is awesome and very generous. It's not free though. The average person can't just buy a plane ticket, rent a car, get a hotel room, and take time from work for this. That's probably why you don't have many entrees in the give away. The people that can afford to do this probably already have a new bow.

Video is super helpful on fixing wheel lean. But now my center shot is off & I have a freaking caterpillar for a paper tear.

I'm sure no ones ever asked you to show how you made that draw board thingy-ma-jig so I will , pretty please show us the MFJJ magic draw board recipe , great video , cheers

I have the Spot Hogg Laser Aligner Tool, I have the Phase 4, I have the Top Hats Kit, I have the Draw Board. I aligned it so the laser is hitting the groove of each cam, top and bottom. Arrows are spined correctly, Cam timing perfect, Centershot at 13/16"........ I get a left tear no matter what arrow I shoot. What in the heck am I doing wrong. I am not a new archer, have bullet holes with my other bows. Upper cam needed one set of tophats, bottom cam another but the lazer points correctly to both at full draw. LMK your thoughts MFJJ.

Great video. Question could you put a twist or 2 into one side of the yoke to get it closer? Honest question just trying to learn

Great video. I would like to know if you have a parts list for draw board and where you got the laser pointer from. Keep making these videos best on you tube.

Once the cam lean is sorted out do you ever need to redo it? Like when getting new strings or something? I had to swap the top tophats around on my 29 to get bullet holes. It was really easy and the satisfaction of having my rest in the centre is great.

Great vid! What laser did you use?

MFJJ I love your content I have been watching you on dans channel for years and now on Tim’s and you’re really smart guy but I’m just curious when you said that you moved the cam all the way to the right it had the least amount of wheel lean when I shimmed my elite all the way to the right it seem to have the most amount of wheel lean. Is that correct?

so, is your draw board jig made from parts from a garage door opener? looks pretty cool!

Would love to see a close up angle when you work on different areas of the bow jus to get more detail into what you’re actually doing

If you get them aligned with the lazer but your center shot is off do you just flip the top hats left to right? Also in another video you said you cant trust checking timing in LCA press drawboard, could you do a video on how you would check timing with the LCA drawboard? Still waiting for my phone call!

Wow i always thought that you had to use the same spacer sizes on the bottom and top and flip them between sides. Was never sure if you could run mixed top hats

Same as I said about Hoyt. Wheel lean adjustment engineering from the 1980's. What is wrong with these people? Thank you for the video.

Josh question: when changing your Top Hats to remove a tear either left or right, is it best practice to change both cams Top Hats with the same set of Top Hat configuration?

So I bought the laser, but the top hats that are parallel make my arrow sit at 11/16” instead of the 13/16” Mathews recommends, to get them to flying well. In the video if I understand it correctly you say once they are aimed at each other you should move them together, however when I do that to get back close to the 13/16”, they are no longer close to being aimed at each other, any suggestions? Or what do you feel like is more important? Or does it even matter if I get good arrow flight, as that’s what we’re all going for!

So are you going to use the new stabs on this phase4, I think you should!

If I am having wheeling issues would it cause my cables to have bad spot

Do you too hat tune before paper tuning? I just got a new phase 4 33 and am still in the bow/arrow build process, but I’m aware of the top hats and don’t know if I need to mess with them yet. Also how does the top hat change cam lean? I thought they were just spacers to move the cam left and right on the axis of the axel.

With the Phase 4 having 8 limbs compared to the normal 4, Is there more of a variance/ tuning issue? Or is Mathews able to get them closer with the amount of limbs that they have.

The actual most helpful tuning video for mathews, I have been playing with my top hats quite a bit. I learned the hard way on getting the finger in the same position on the limbs, stripping those little screw that attach to the axle suck... lucking I had spares

Holy Shit the contestants get to choose the bow that's awesome.

Do you perform this on every bow sold through your shop before it leaves ( If needed )?

Awesome video will you Please do an rx7 ultra

Would top hats play any influence on how far your sight pins are left and right?

Josh, I know you advocate working on your own bows, but this sure makes it seem scary. I plan to re-start working on my own arrows, but not sure about bows yet. I have several Matthews bows and fortunately a very good bow shop!

I have a question, for anybody... Should these components have come with my bow (V3 31") when I bought it at the pro shop? Same question with the SwitchWeight Mods? Thanks-J

Good stuff, but I wish you had addressed how tight to get those axel screws. Some folks on the internet claim that is the reason the bearings fail so often on the cams. Thanks!

@RKeaton

Жыл бұрын

Just snug. Use a little purple Loctite

Have you considered using a non impact driver on your draw board/Bow press? Might have to use it in 1st gear. Seems like the impact is unnecessary for adjusting them.

@tacokiller101

Жыл бұрын

Regular drills have the tendency to rotate in hand while impacts don’t

Ever run into those top hats not coming out easily? Mine are horrible to remove, like needed to use a punch and hammer to tap them out. They slide out easy on my old VXR.

@charleszielke2634

Жыл бұрын

I think the rubber between the limbs on the new phase 4 makes them harder to remove. I know my shop uses a old top hat to press them out. I got lucky on my phase 4, as I did not need to change them out.

@Brent_Rolston

Жыл бұрын

@@charleszielke2634 yeah I never looked inside the hole to see if the rubber was maybe binding a bit, but that makes sense. Thankfully not something you need to adjust very often.

Anyone know what laser he’s using?

I've been signed up a while. Got a new phone so I can get wifi calls ;)

I’m glad I shoot a Bowtech! It’s a hell of a lot easier to tune!

So hope I win one of those bows I would love for an excuse to go out there

What lazer do you have that you’re using? I’d like to get one.

@robertfazekas4607

Жыл бұрын

Spot hogg makes that laser

I can’t be the only one that wants to send MFJJ my bow and see how horrible he thinks it’s set up.

Fingers crossed

I would love to sign up for this but I am 67 years old and follow you on you tube, but Instagram, I have no idea what that is.

I know it’s not for sale but doesn’t change the fact i want one of your draw boards!!! What laser is that???

@fiveandadime

Жыл бұрын

spot hogg laser alignment tool its on his site

@Kodyanderson402

Жыл бұрын

@@fiveandadime thank you!

Would this also be the same for the V3X series? Trying to get it all right by watching all your videos 😅. Thanks for having the parts in stock to do all the tinkering over the weekend I just did lol love the content keep it up. Make sure Doug gets his coffee for all the orders haha

@drewolm

Жыл бұрын

Yes, all the way back to at least the chill series.

@Lurch51212

Жыл бұрын

@@drewolm thank you for confirming for me Drew 🍻

@drewolm

Жыл бұрын

@@Lurch51212 Yea, sure. I mean, its not as easy as turning a screw on the limb but, if you've go access to a press, its a very good and easy system. I have seen some nasty tears removed by just flipping the the top cam hats around.

@Lurch51212

Жыл бұрын

@@drewolm nope don’t have a press yet but is on my list. But luckily have the stay afield to do other things but doesn’t help when trying to remove cams.

Still doing giveaways?

I really want mfjj to tune my bow

Lol at the BowTech fanboys acting like Mathews owners have to do this every Saturday. Meanwhile Mathews has the #1 selling Flagship bow in the country.

I want the laser doohickey

@fiveandadime

Жыл бұрын

spot hogg laser alignment tool its on Podium archer! Give MFJJ some biz

Go bow tech

So let me understand this. Mathews produces a $1400 bow that basically cannot produce a bullet hole tear without buying parts, moving cams and stuff?

What is the Instagram account?

They could have color coded them🤦‍♂️. Wouldn’t independent limb bolts be easier?

@RobertWilliams82-22

Жыл бұрын

If they would have colored them then people would complain about the color they need not matching the color scheme they want… it’s really not difficult especially since it’s dang near a one and done deal

@RKeaton

Жыл бұрын

They are marked with lines that easily ID how to pair them

And this is why we buy smart cam from Bowtech

Seems very complicated.

Disassembly for top hat tuning and having to wait for draw length modules which may not be in stock are two reasons to avoid the Mathews brand.

This makes me happy to shoot a Bowtech.

What a pain in the rear. Just buy a Bowtech. You can fix your bad arrow flight even at elk camp.

LOL, to think this garbage system is so revered.

@RKeaton

Жыл бұрын

Easy system, don’t understand the hate

@snboutdoors9567

Жыл бұрын

@@RKeatoneasy system is the bowtech system

@pumaa7

6 ай бұрын

For real, this video makes me want a bowtech