People who build miniatures and models would love this, it's like a powered pin vice.

I like how he shows the problems encountered also.

I feel like you need an on/off switch on the drill itself. It turning on by plugging it in seems like a recipe for disaster.

@roomspaceplayground

2 жыл бұрын

Agree, I am planning to upgrade this pen later on. Thank you for the advice!

@maximkrasnyy6652

2 жыл бұрын

@@roomspaceplayground maybe you should control it by a pedal, like a tattoo machine

@zacharinl

2 жыл бұрын

@@roomspaceplayground , you should patent it

@jeyjeywoolfolk1684

2 жыл бұрын

Bro that is so cool having your phone do that

Hey great build! I noticed in the comments people were mentioning a switch which is what I was going to suggest as well. Since that's already been done 100 times I was going to get into specifics. If it were my build I would have a master on/off toward the back of the pen out of the way from accidentally being bumped on/off and then on the actual grip of the pen install a small ( off position) momentary switch so it only engages when gripping the pen

@roomspaceplayground

2 жыл бұрын

yes i do have similar idea, im planning on the next pen to have that. Thanks alot! :D

@ahmdabdallah5811

2 жыл бұрын

@@roomspaceplayground What Is Islam? Islam is not just another religion. It is the same message preached by Moses, Jesus and Abraham. Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. It reminds us that since God created us, no one should be worshipped except God alone. It also teaches that God is nothing like a human being or like anything that we can imagine. The concept of God is summarized in the Quran as: { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) Becoming a Muslim is not turning your back to Jesus. Rather it’s going back to the original teachings of Jesus and obeying him

Clever little build. We shared this video on our homemade tools forum this week 😎

With USB-C and USB PD you could get up to 20V at 5A from a USB-C power supply. That would make this thing really crazy. The ZYPDS is a small USB-C chip that asks for 12V or 20V from a USB-C power supply, they're super useful for projects like this.

@roomspaceplayground

2 жыл бұрын

Wow, that is a new knowledge for me. Thank you for sharing, definitely will try it when I upgrade the drill :D

@davey2k12

2 жыл бұрын

That's overkill and will burn that motor

@lost4468yt

2 жыл бұрын

@@davey2k12 sure of course they'd need to modify the rest of the design

@davey2k12

2 жыл бұрын

@@lost4468yt yeh just by a cheap one 👍😂

@XaLi_GaLi

10 ай бұрын

​@@roomspaceplaygroundbuddy, use heat shrink tubing instead of duct tape.

I want to use this for bookbinding, super cool idea..

@bradmeekakasilvertopflyer

2 жыл бұрын

I use to own a small mom and pop printing shop, about a dozen years of experience,if you hit a glitch let me know I'm glad to help

Heat shrink as grip works well too…. Instead of the tape, great build bud, keep up the work

@roomspaceplayground

2 жыл бұрын

Thanks for the tip :)

Excellent my brother infact marvelous project plus clam without noise of music i loved that the most but over all too hats off to your project 🎩👍😊

Great project! 😄

失敗するところも見せてくれるのが良いですね。

Very nice!

That tool would make a great asset to have in the shop. Excellent build and video, thanks for sharing 👍👍👍👍👍.

@roomspaceplayground

2 жыл бұрын

Glad you like it!

@smokysmoka

2 жыл бұрын

except that it barely pits some plywood with a 1.6 tip :) but very nice to see

Good job 👍

this is a good channel not music just skills !! thats music for my ears

@roomspaceplayground

2 жыл бұрын

I'm very glad to hear that! Thank you! :D

@netten2057

2 жыл бұрын

@@roomspaceplayground thanks to you, really beautiful work and excellent channel

created a push button on the Mini drill would be more judicious

@roomspaceplayground

2 жыл бұрын

Yes! I'm planning to upgrade this pen later on. Thank you for the advice! :D

Cool Design, It would be great for models and mini build things, where a dremel couldn't fit.

@roomspaceplayground

2 жыл бұрын

Thank you :D

Motor used doesn’t have enough torque to be used as drill it simply a high speed motor

@roomspaceplayground

18 күн бұрын

Agree, this is a fun project

Keep up good work

250 полуляхов из 250 ! хорошая смена растет!

@roomspaceplayground

2 жыл бұрын

Thank you! :D

@evgeniymuhin2445

6 ай бұрын

🤣@@roomspaceplayground

Cus it low voltage use a FET or transistor with a sliding potentiometer needs slowing a bit or even a gearbox helps prevent ya motor from burning it's brushes Cud even directly connect drills make the drill shaft with a thread or square drive use a magnet to hold it in place

@roomspaceplayground

2 жыл бұрын

agree, i had the same thought after trying it. but after all this project is just a simple one. I might make a new one with a gearbox like you said next time. Thanks for the advice :)

Świetny pomysł

вместо изоленты должна была быть термоусадка. из изоленты со временем полезет клейкая основа и будет грязь.

@roomspaceplayground

2 жыл бұрын

Thank you for the advice!

@user-kl9bv7rq4p

Жыл бұрын

Или синию изоленту использовать )))

De esto se puede hacer un dremel... Genial.

Good show. I will have a cool pen drill by today. Thanks

@roomspaceplayground

2 жыл бұрын

Thank you, I hope yours will be better than mine.

Ahhh that dental drill sound!!! I'm having Bad flash backs or is that panic attacks! Lol neat drill tho!

@roomspaceplayground

2 жыл бұрын

Thank you :D

To make this small item you have shown so many tools to use,

@roomspaceplayground

8 ай бұрын

I take that as a compliment XD

I like the look of it , do you think it has enough drive to use a brass or wire wheel ?

@roomspaceplayground

2 жыл бұрын

as long as you are not pushing it too hard, it works fine

I never seen before a tiny dc motor like this but i'd to make a drill with a pen. Well....I put "only " five stars to you! ☆☆☆☆☆ Excellent.

@roomspaceplayground

Жыл бұрын

Wow, thanks alot!

Мини дрель?!? Чувак, ты гониш!! Это же целый бильярдный кий!!!

its great, but does it give high torque? if so, make sure the motor doesn't heat up from overload

@roomspaceplayground

2 жыл бұрын

not high enough in my opinion, as it will stop if I push a bit deeper. If using it quite some time, it does get warm. That's why it has to use metal body.

@killerjulio

2 жыл бұрын

I am more worried about the fact that if the bit locks, that motor will keep on turning and binding the wires like it did on the pen

@roomspaceplayground

2 жыл бұрын

might need to add small bolt on the body for tightener. But it cant be too tight either. ill keep that in mind for the next project. thank you

@dyd12345

2 жыл бұрын

How do you stop it from overloading or heating up too much?

@roomspaceplayground

2 жыл бұрын

for now the only option is turn it off i guess

Комментарий в поддержку канала и ролика, а также труда мастера.

Mini drill?!? Dude, you're driving so crazy!! It's a whole billiard cue!!!

Cool homemade.better give switch on\off and speed control 👌👍😊

Its nice, but it must been better if you just listed down all the materials you've used in this project.

@roomspaceplayground

2 жыл бұрын

Hi Thank you. The materials basically are: - 1 mm drill bit - 8 mm chuck for the drill bit. the inner diameter is around 2 mm. - LK0236 motor - 8 mm aluminium pipe - Male and female power connector - USB cable Hope it helps :)

@davey2k12

2 жыл бұрын

Ffs did you watch the video and are you visually impaired or something

@CedricKarlFonk

2 жыл бұрын

@@roomspaceplayground where did you get the motor from??

Super fanstatic

top master

That initial start up scared the shit out of me for some reason.

@roomspaceplayground

2 жыл бұрын

Oops :D

amazing

@roomspaceplayground

2 жыл бұрын

Thank you!

Very Good ,,,,,,

Great build, Can you please put up a link from where to buy the brass chuck as I'm not able to find one online with a inner diameter of 2mm. Thanks

@MrRusty-fm4gb

Жыл бұрын

Actually I found exactly what’s in this video on eBay. Search for “Micro Brass Electric Motor Shaft Clamp Fixture Chuck For Drill Micro Drill Bit”…

good job

Respected bro really hard work bro...

@roomspaceplayground

Жыл бұрын

Thank you bro

Atento a las altas RPM de esos motores son de alto riesgo cuando se utilizan en funciones a lo que no están diseñados. La idea está buena y sirve pero atentos siempre al tema de la seguridad.

Verry Nice project and olso great for carving in to little projects of in a Tiny space and you can dril a hole👌 PS whats the model number from the little DC motor💪 Greets MD 🇳🇱

@roomspaceplayground

2 жыл бұрын

Thank you, the motor number is LK0236. I also put it in the description. :D

@MD-gs2sm

2 жыл бұрын

@@roomspaceplayground thanx💪 go on with projects like this make a 2.0 of it 👌 with a speed controller/display, maby a red little stop button and on en of switch, and e put some rubber grip on the pen ..... Love this project AM gonna make IT olso greetings MD

Jeweller's engraving ? Speed maybe reduced for engraving

@roomspaceplayground

2 жыл бұрын

Yes, with a gearbox, it might work for engrave.

nice

What type of motor did you use?

@roomspaceplayground

2 жыл бұрын

the motor is LK0236, I think it is a drone motor or some sort.

7:39 *At least it is twisted good now* 😄

@roomspaceplayground

2 жыл бұрын

:D

What is the original small hand drill you are using named and/or found?

@jafinch78

2 жыл бұрын

I think I found, Meterk Part Number E17695-1. Thanks for sharing! Neat design.

@jafinch78

2 жыл бұрын

How's it holding up? Still working OK? Thinking a speed controller might be a handy addition if those motors last and you can keep the chuck on.

@roomspaceplayground

2 жыл бұрын

Hi, my original one has no brand on it, I've got it from some online shop that I forgot already where. The pen drill is still working just fine, it is just that you cannot push hard like it has not enough torque, besides that it is still working and useful in tight space if you push slowly when you drill :D

Thank you

@roomspaceplayground

2 жыл бұрын

You're welcome :D

Nice one. Did you build the red one also is there a video for that?

@roomspaceplayground

2 жыл бұрын

Thanks, the red one I bought from local online store.

Thank for help

What is the condition of the dc motor when used for a continuous period of at least 10 minutes? Does it become hot?

@roomspaceplayground

5 ай бұрын

Definitely

Kereeeeennnn 🤟🏼

@roomspaceplayground

2 жыл бұрын

Terimakasiiihhh :)

... отличные получились у тебя дрельки- граверы, я тоже хочу себе сделать подобные, где покупал такие узкие моторчики?!!

@roomspaceplayground

2 жыл бұрын

I think it is motor for drones. You can try aliexpress or if you have old drones, you might be able to use it.

@furik261

8 ай бұрын

а какой диаметр вала моторчика от квадрокоптера??!!!!

In every video I've seen, the drill chuck was the problem; how to make it? So did you make your own. Or was it premade?

@roomspaceplayground

10 ай бұрын

it's premade, found it online.

Nice , It would Have Been great If You provide a Switch on this

@roomspaceplayground

2 жыл бұрын

will do on the next version :D

I think i found all the parts in Video now just have to wait for delivery ,Will update this later

Is he on a ship? The wood creaking in the background

Just like a dentist's drill

@roomspaceplayground

2 жыл бұрын

Thank you, but I don't recommend to use it on yourself :D

Не понятно как была решена проблема с креплением патрона на вал двигателя... Почему он перестал слетать?

Отлично. Возьму на заметку.

I can do my own dental work with this!

@roomspaceplayground

2 жыл бұрын

i'm not recommending it ;D

you can also hide battery inside :D

Wow! It's craft skiil.!

It's very nice tools

@zainulmustofa8037

2 жыл бұрын

You can visit my chanel youtube sir. Maybe you Like my videos. Thx Um my English bad I'm sorry 🙏

Very good but where found motor PL Write.

@roomspaceplayground

2 жыл бұрын

Hi Thank you, the motor is LK0236. I'm not sure if it is available in your country, but any small drone motor should work in my opinion.

@anantjoshi3236

2 жыл бұрын

Thanks .

@manukalias

2 жыл бұрын

Nice DIY @Anant This motor is easily available in Indian market, Be it Delhi or other cities or from online shops like robu etc.

Ok So Now that I am Moved in To my new Home I have the time to Build this Drill . Everything Is going well Except for the Electrical Connection on the end The Ones I ordered are way to big for the tube Do You know what size those are in you project ?

@roomspaceplayground

Жыл бұрын

if i remember correctly, it is about 5 mm diameter

Where to buy thay drill head set???

@roomspaceplayground

2 жыл бұрын

You can search on your local online store.

whats th name of gold coloured head ur using to hold bit

@roomspaceplayground

2 жыл бұрын

I think it is called "drill chuck".

@pranjalyadav9995

2 жыл бұрын

@@roomspaceplayground ok thank you

This material were from purchased

@roomspaceplayground

2 жыл бұрын

you can search on your local online store. Most of my materials are from online store.

Well.

What’s the red one you are using ?

@roomspaceplayground

2 жыл бұрын

it has no name when i bought it, i got it from local online store long time ago

Cool idea. Can it also be used as screwdriver? Sounds a bit like crying goat lol

@roomspaceplayground

2 жыл бұрын

thanks! I dont think the motor has enough torque for that. :D

Nicely done, but I'll stick with my Dremel.

Неплохо было бы ещё кнопку или рычажок воткнуть, думаю это было бы несложно

Aiya are chak eke keeyede

на корпус можно термоусадку натянуть красивее будит

Muito bom, que motor é esse e onde vende esse modelo

@roomspaceplayground

Жыл бұрын

Thank you, i believe this is motor for drones, i found it on local shop

Donde consigo la punta del dremel?

@roomspaceplayground

Жыл бұрын

I found it on local online shop, people call it chuck or something else I'm no so sure either. But i'm pretty sure store like aliexpress would have many.

That's why I always like creative people. I love to spend a few minutes watching this kind of videos because those minutes are worth it. Learning always something new

спасибо!

please tell me: what is the diameter of the motor shaft itself?

@roomspaceplayground

8 ай бұрын

I have added the information in the description. The materials basically are: - 1 mm drill bit - 8 mm chuck for the drill bit. the inner diameter is around 2 mm. - LK0236 motor, I think it is a motor for drones. - 8 mm aluminium pipe - Male and female power connector - USB cable

@furik261

7 ай бұрын

Я заказал моторчик с диаметром 0.8мм. и ничего не подошло 😢😢😢, ждал долго) и диаметр очень маленький, нужно как минимум 1.8 мм. Диаметр вала моторчика!!, Огромное Вам Спасибо за помощь и информацию!!!

Idenya bagus banget

@roomspaceplayground

2 жыл бұрын

Terima kasih :D

can this be used for dental?

@roomspaceplayground

2 жыл бұрын

Interesting idea, but I wouldn't recommend.

Can you give me a link to the 8mm Chuck?

@roomspaceplayground

10 ай бұрын

Not very sure if this is the correct one, but here you go : shopee.vn/B%E1%BB%99-%C4%91%E1%BA%A7u-k%E1%BA%B9p-m%C5%A9i-khoan-mini-tr%E1%BB%A5c-2.0mm-2.3mm-3.17mm-ch%E1%BA%BF-m%C3%A1y-khoan-m%C3%A1y-m%C3%A0i-mini-LK0069-i.8004713.2372391943

motor pabo kothay

What is the name of two parts

@roomspaceplayground

2 жыл бұрын

I think you mean Drill Chuck?

Hello... where can i buy this mini electric motor?

@roomspaceplayground

2 жыл бұрын

I found it on local online store.

direct drive from small motor with that thin shaft will hurt the motor... it wont last long...

@roomspaceplayground

Жыл бұрын

just dont push it too hard, it still works till now 😁

Me serviría el nombre del taladro rojo.

@roomspaceplayground

2 жыл бұрын

I coudln't find where I got it long time ago, it is from some cheap online store. There is no brand name as well on it.

TOP

What brand of engine ?

@roomspaceplayground

Жыл бұрын

no brand, i just found it on online shop

I want this driller can you tell me price

@roomspaceplayground

2 жыл бұрын

Sorry, not for sale. But thank you for liking it :)

منفضلك كيف نحصل على مثل هذا المحرك مثلا..؟

@roomspaceplayground

2 жыл бұрын

I got it from local online store. Similar drone motor should work in my opinion.

What dc motor this bro

@roomspaceplayground

2 жыл бұрын

Hi, It's a motor for Drone, you can check the description for the motor number.

Coloca aqui de baixo desse comentário a lista do nome dos materiais que precisam para fazer uma caneta dessa igual!👇🏾

@roomspaceplayground

2 жыл бұрын

Hi, I've added the materials in the description. Cheers!

@matheustoddynho

2 жыл бұрын

@@roomspaceplayground thank you

What is the drill bit size

@roomspaceplayground

8 ай бұрын

I have added the information in the description. The materials basically are: - 1 mm drill bit - 8 mm chuck for the drill bit. the inner diameter is around 2 mm. - LK0236 motor, I think it is a motor for drones. - 8 mm aluminium pipe - Male and female power connector - USB cable

7:15 I said to myself, “Is that going to stay on?” and instantly that happened. I felt bad but laughed pretty hard at how I just said it and then that lol

@roomspaceplayground

10 ай бұрын

😂😂😂