*Friend* - "hey can I borrow your drill press?" *Him* - "sure buddy no problem" 😏

I've been a machinist for 45 years and this is the coolist thing I've ever seen built from start to finish. Great job.

How do you not have more content. This is gold. If you released one video like this a month and slowly got better at video work you’d make a killing. Do the smallest mill, smallest blasting cabinet, smallest hydraulic press, smallest magnetic chuck, smallest grinder, smallest belt sander, smallest planer, and the smallest lathe. Then when you get super popular people will start wanting to buy them and you can make tooling to mass produce them. lol

@copescale9599

Жыл бұрын

You sound like someone's grandma.

@jpdjavu478

8 ай бұрын

Vc vende seus trabalhos ???

Now I want one. Heck, i want a whole shop of "tiny tools". Great job!

@metatechnologist

2 жыл бұрын

Then you can use all those tiny tools to make bigger tools!!

@RAREFORMDESIGNS

2 жыл бұрын

@@metatechnologist Or use them to make smaller tools........

@cumaliozenen7191

2 жыл бұрын

@@RAREFORMDESIGNS Bo kolay

Well, except for needing an entire machine shop of normal sized tools to fabricate the tiny tool, pretty cool video.

I'm impressed with how well this came out. It seemed like you were 'eyeballing' a lot of the hand drilling and cutting, and yet with quite a lot of eventual precision in the result.

@jimmibram

2 жыл бұрын

I didn't realize before you wrote it, but that is exactly how I like to work too -> Eventual precision :-D

@ricardorodriguez-up2bo

2 жыл бұрын

Is how mechanics, especially gifted should work.

@salmahady5993

2 жыл бұрын

@@jimmibram ذذذ

@vijaysinghrajpoot3966

2 жыл бұрын

Hi

@thunderbolt997

2 жыл бұрын

Precision eyeballing*

Give it a magnetic base and you have a very small drill for accurate on site drilling of micro holes.

This press has worked like a charm for my projects kzread.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

Комментарий в поддержку канала и ролика, а также труда мастера.

Please make more "mini tools" like sanders, planers, thicknessers, jigsaws, angle grinder ( this would be so useful for getting into small spaces ), mini pipe benders for really small metal tubes, mini bench saw, mini multi angle compound mitre saw ( this would be very hard to accomplish), mini sheet metal bender/press ( for bending really tiny metal boxes, mini metal roller for making straight metal in to curves and circles ( don't know if this is even possible but I'm gonna challenge you for this one !). Anything you could figure out how to make in miniature would be amazing and I know a lot of model making hobbiests would love to see them. Great video which is why I got so enthusiastic about the miniature range and why subscribed. Please keep it up.

@Hellsong89

Жыл бұрын

One can do 1/12 scale knifes, hand planers, saws and axes that are from right materials and actually cut wood. Metal cutting/grinding tools are bit more harder to make and power tools you run into issues with size of the motor and bearings. Thats is about what limits the size, so its actually in scale. I have couple dozen such working models made, but havent delved into power tools for mentioned reason of motor size.

@Baetzibaer

Жыл бұрын

Just have a glimpse into the Proxxon catalogue ...

OMG Duc Phuc , i like your cover version. Love it !

I'm blown away how effortlessly you made the build look.

This dudes skilled at whatever job he does. The lack of measurements and precision he made the drill press with is impressive. Not many people have hands on skills and engineering knowledge

This absolutely rocks. It is pretty tough to do tiny holes in thick material. You did a brilliant job here.

I dunno if "cutiest" is a proper word but...this is the cutiest drill press I've ever seen

Very beautiful artwork

Ya no that's just over the top 🤣🤣 good build tho 👍belt drive nice

This is SO impractical. I love it. Hehe

Fantastic, totally amazing your work. Could you make the joy of the hobbyists and present us with the project?

The level of planning, skill and steady hands are amazing to watch not to mention attention to detail, very well done !

That Miniature Drill Press Is Awesome, Nice Work !

"What is this?! A Drill Press for ANTS?!" Looks amazing, and even more amazed that It actually works!

Small & hard ... Nice job congratulations

Oh, I liked that finished product there. Need more tiny shop tools. Baby knee mill and lathe.

This would be amazing for someone that makes alot of small items for Stopmotion fabrication.

People might think it is not practical or useless but for people who make DIY PCBs for school or projects like me, this mini drill press is great tool for drilling holes for through-hole components.

That lil things got torque!

THAT IS SO CRAZY DUDE YOU HAVE MAD SKILLS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

It's a very amazing creation.

I am an electrical guy and always admire mechanical colleagues, they are not only creative but also extremely skillful with their hands.

Beautiful. Make more mini tools for sure. Please do a mini metal/wood Lathe too.

great!!! now make a really really tiny one using the little one

Anh có tay nghề cao trong cơ khí xin cảm ơn đã chia sẻ với khán giả tác phẩm đẹp

I want one! These would be awesome for models and crafts.

Waow Waow Waow Excellent Good job man

if this thing had a distance of 15 cm or so between the center line of the drill bit and the post it would be ideal for macbook keyboard replacements. maybe then I could actually drill out the rivets without drilling off angle... XD

@TheJttv

2 жыл бұрын

Look into a Proxxon professional rotary tool IBS/E a with a MB 200 drill stand. Or a Proxxon drill press

@DanteYewToob

2 жыл бұрын

Why not just buy a normal bench top drill press? You can put a small bit in there…

@rick5078

2 жыл бұрын

@@DanteYewToob saving space on an already crowded desk in a small at home workshop.

@TheJttv

2 жыл бұрын

@@DanteYewToob normal drill presses have pretty shit tolerances

@MisterRorschach90

2 жыл бұрын

@@TheJttv exactly. The tolerances he would need on a drill press for a freaking MacBook would be considerably more expensive than is feasible and take up massive amounts of space.

One of the best mechanical precision work I've seen in recent years. Excellent

Thanks Totorial Nice Your Video 👍🌷

Wowww..... Oppppaaaaa Gangnam style..... NEW channel

This would be a fantastic addition to my modelmaking tools - not really necessary as I have hand drills in various shapes and sizes, but just the sheer kudos of showing one off to my friends and saying "Yeah, I just made it a few weeks ago after watching a KZread video and thought it might come in usefull" would leave them speechless as there is one guy who just buys every conceivable tool out there. I am just going to have to try and make one of these ! Now where are my tools....

Simply da best solution i've seen, bravo! Got just anormous amount of esthetic extremums )

тебе нужен регулирятор оборотов на таких высоких оборотах сверло быстро потеряет работоспособность. а так всё 🤩

@iron9564

2 жыл бұрын

Ну если что, сверлу такого диаметра это даже мало оборотов. На в скидку сверло где-то 0,5 или 0,8мм и ему смело можно давать до 30.000об/м. Так что тут регулятор не к чему...

@RobotN001

2 жыл бұрын

Вообще-то в том контроллере от радиомодели это штатная вещь. ШИМ регуляторы без радиоуправления есть на али.

Guinness Book of world record Genius can make anything

You have 2 brains. One to think inside the box, another to think outside the box. (One brain see the armature. Other sees a gear shaft.) Great work. Regards.

That is awesome I’ve never seen a drill press as small as that actually working it looks like a normal sized one thanks for sharing Scott

Wow Amazing, super top job

Really cool build. Now Barbie,s man Ken can get a job. Lol

i like that drillpressception that u needed a drill press to build ur drill press.

I work on the tiniest pieces for a tiny engine, I legit wish I had this thing, it would be perfect for me.

Wow!! Right From scratch!! Really this is amazing. Now the Chinese will imitate it.. salute to you

@user-gv2mh7gz6b

3 ай бұрын

Also him: I am the Chinese

Holy COW! GOD BLESS YOU AND YOUR TALENT/SKILLS! I’m disabled., I try and make smart devices with ESP32 and 8266 mini boards. (U can look them up on KZread). I take them a few steps further to actually “”assist” me as it’s hard to do many things. So generation 3 I call it. I don’t video. I just try and automate more of my tasks. With that, I have to make the case to pit it in. Waterproof for outside items. I have a Dremel type tool (cheaper brand of course) I use. The case is plastic, wood, thin metal, plexiglass (not as thick as you drilled). My hands are not steady. Hard to drill straight holes in small size parts. Please let me pay you to make me a mini drill….. it would be soooo useful. If it is easier to make… it could be 1/3 to 1/2 bigger in size. Did you make the drill bit? I use 1mm , to 10mm diameter /very short screws mostly. Sometimes I have to use eyeglasses screws sizes. If you built drill press, where can I buy mini bits to pre drill holes? I check (China).. If accepted, leave msg here. I’ll give you my email address then. We go from there. (I cannot afford a 3d printer to make my cases.) If not, I humbly understand. By the way. I am tied into tech “world”. U need backup channel to have all videos (copied to) and refer to subscribers of backup channel ASAP. I have no ties to any, but I know internet/tech world. There is a 1yr old site growing good, Adding more capability daily and got huge $ infusion to grow. They may copy ur current videos over/ save you upload of old videos there. WebSite is called (rumble). I know a lot of changes coming to internet. As well as sites to not continue for specific reasons. I LOVE BLOGGER VIDEOS LIKE YOURS. IT IS PLEASE CREATE backup site somewhere and SOON. (THIS WEEK NOT TO SOON). GOD BLESS! I HOPE WE CAN DO BUSINESS (DRILL PRESS). THX. ALTON

Wow I'm impressed 👏 that baby drill sure don't at like a little baby it has some serious power 😳

I have no need for one, but I want one. I now want an entire working mini workshop.

I love the step by step making each part! So cool and simple! Very nice work!

Good job my friend 👏💯👏

Very impressive and beautiful creation.

Nota mil, seu trabalho é muito bom, parabéns 👏👏

Everytime I feel like I came up with some neat and cool I see video like this and realize my stuff is nothing compared to the ingenuity of the stuff some of you guys make wow this is awesome

Love it I wish I had the tools to do this , I would become addicted to learning and would some day be a beast too , I’m a carpenter , I do a lot of standing seem metal roofs , build houses and we manufacture our own flashing , this would be awesome

@pirminkogleck4056

2 жыл бұрын

get a lathe and a millingmachine , u can get a lathe for 500 to 1000 usd. and a milling machine from 600 upwards! check mini lathe and mini mill. i have a bit a bigger lathe and a mini mill and i mae my first engine this week!

Literally, you are a creative person

😍😍😍😍😍🇸🇦🇸🇦🇬🇳🇬🇳Excellent, you are a real genius

Классный сверлильный станочек,ничего не скажешь!

Такого я ещё не видел. СУПЕР!!!

This is awesome. Now I want a mini drillpress

Fantástico. Vc é um gênio. Parabéns. Ficou perfeita.

Small and mighty, simple beautiful 👌🏼🤘🏼👍🏼

Too much good, I like a project. Nice !

Dang that's badass! A hand made mini drill press that fits in the palm of your hand 👌

I am impressed brother very nice

One of the best DIY projects I've seen in a very long time. KEEP UP THE GOOD WORK.

Adorable and a very awesome novelty build. I love it!

Really like this, great work.

Hehe hôm nay em được nghe cô Mây hát gòi :))

Amazing small and unique tools very attractive always liked small tools it's the cutest ever😊

It turned out great! even a bit smaller and can already be used as a key ring.

Thật là khéo léo quá đi thôi ! Tôi rất ngưỡng mộ bạn !

Hope you learn to talk someday, your craftsmanship is great!

Just out of curiosity, did you file the flats on everything instead of using your mill because of the setup time required for the mill?

@94XJ

2 жыл бұрын

My guess was that the parts are so small, clamping them in the mill would be virtually impossible.

@MF175mp

2 жыл бұрын

He also hand taps despite being probably rich af having millions and millions of subscribers and viewers

You have done it excellently and very professionally

Woww...Amazing..bro 👍👍👍

Nice yarr

ecxellent mini drills tools , bravo !

You are really creative. Greetings to you

Really Hard work for this tiny cute gadget. Beautiful✨❤

😳 mais que miniatura perfeita, 👏👏👏👏👏. Meus parabéns, um trabalho muito bem feito. 😎🇧🇷🇱🇷

Outstanding work in the best traditions of ‘hand made’ craftsmanship.

Самый лучший сверлильный станочек. Сила. Ставлю класс!👍👏💪

Very impressive !!!!!!!!!!!!!!!!

Waaow amazing,,👍

Very PERFEKT work 👍

Had those at school. In the printed circuit board etsing ( acid bath) and hole drilling room. about the same size. Worked fine. Bought ones. But yours looks much better.

WHAT AN IDEA SIRJI

Die Idee ist so super. Und das Ergebnis wunderbar. Tolles Video.

What a genius ! Just so mini .

The irony of using a full size drill press to make a diy drill press.

@Professionalfailure

Жыл бұрын

Thats how production works, you use machines to make more machines

Eccellente, bravissimo. 😮👏👏👏👏👏👏👏👏👏👏👏

I salute you bro,galing mo talaga.

I love how you’re just doing it

best good job i ever watch

Dude! Hats off to your amazing talent in this DIY. keep it up.