🚴🚴🚴 Check out our other video HERE: kzread.info/dash/bejne/eYVkzqujo73FY5s.html

@dinkvjr

Жыл бұрын

Extremely talented, this is not your typical project. Very cool btw. As soon as I saw the gauge of wire I knew it was going to be good. 😍👍🙌

@skillcollector9800

Жыл бұрын

Showing instructions on this without going over safety precautions is extremely irresponsible.

@Gregory_12

Жыл бұрын

You can d!e from misusing a microwave in dozens of ways, some not even including the transformer

@cv507

9 ай бұрын

mine steea11 wörqx -:- alldi€ ^ ^ öh decäydce ´think ^ ^ is gr8 but hm star wär€$ ?

@westonharvey9319

4 ай бұрын

😊​@@dinkvjr

You need to verbally explain why and show how to manually discharge the microwave capacitor prior to removing the transformer. There is enough stored power to electrocute someone whether it is plugged in or not.

@namaan123

Жыл бұрын

yeah, pretty irresponsible here, if there was ever a need for a disclaimer, this would be it

@jvmiller1995

Жыл бұрын

@@namaan123 Not his responsibility. Anyone that does not understand how electricity works should not mess with this anyway. Plain and simple. I knew someone trying to make a wood burner from a old microwave and it killed him. Luckily I thought he was a idiot before and he only improved the gene pool as far as U am concerned. I think it is a sue happy world and it is freaking common since try at your own risk. Would you watch a youtube video showing openheart surgery and try to save a buck on your wife if she needed it? You people drive me nuts.

@andrewcooke8850

Жыл бұрын

A little heads up on the dangers of disturbing the insulators in the magnetron wouldn’t go amiss either.....

@GarrettMetzskate

Жыл бұрын

In his defense nowhere in his title does it state that this is instructional video or a how to. In which case anybody that doesn't have a basic understanding of current, voltage, capacitors, transformers, inductors etc shouldn't be trying to replicate this process in the first place.

@BeckJoseR

Жыл бұрын

Here is your disclaimer: BEWARE - GOING OUTSIDE, STAYING INSIDE OR DOING ANYTHING AT ALL MAY RESULT IS PERSONAL INJURY.

Remember, if you've got lathes and welders and assorted tools and materials, don't throw out an old microwave because you can use part of it to make a wire hot.

@glutitis

Жыл бұрын

LOL. Like that comment. But....amazing what people do, if they have the right tools

@BLUE-jc2gp

Жыл бұрын

😁🤣

@superhiway

Жыл бұрын

Imagine how fast that could re-heat a cold mug of coffee... ☕ ⚡

@Shockmeslow

Жыл бұрын

Pretty sure you can buy a spot welder for < $100

@christopherbedford9897

Жыл бұрын

@@Shockmeslow Can't buy the satisfaction of creating one though. And for sure your Harbour Freight tool won't look anywhere as neat or cool as this one 😝

25 year electrician here; Although impressed with the OP's ingenuity and craftsmanship, I sincerely wish there were a stern warning on how extremely dangerous playing around with transformers, capacitors, and a few other components found in appliances/machines are and how they are absolutely lethal if you do not KNOW precisely what you are doing. Please be careful out there folks. Electricity is brutally unforgiving to ignorance & complacency.

@jameswood231

8 сағат бұрын

DANGER WILL ROBINSON!!!😮☠️☠️☠️

This video is exactly why I throw out broken microwaves.

@mikemiller659

Ай бұрын

Why is it ppl get tatooz?

@johncoles8014

Ай бұрын

People have died doing this!

@clambroth1923

Ай бұрын

I made it to 1:05 before I checked out and gave this stinker a thumbs down like the other 43 thousand people and counting who feel the same way. Nope.

@jameswood231

8 сағат бұрын

​@@mikemiller659???

As a electrician I would’ve never advised anyone to do this in their hobby:-) high voltage components are to be respected.

@MrTangent

Жыл бұрын

🐈

@lawfullysuspicious1225

Жыл бұрын

id imagine you arnt much fun at parties🥳

@Stonerwolf

Жыл бұрын

Yeeeee doggy sumna beech I blurb en ko evrythang

@chewmonkey89

Жыл бұрын

But there is a sticker, so it is safe.

@dethvyper3136

Жыл бұрын

But learning and understanding such things develops respect and knowledge, ignorance on the other hand creates danger and higher risk. I understand what you mean though. There should be a lot of attention to the risks and dangers in these sort of videos.

Another good tip, salvage the magnets from the magnetron tube. They're thin, but strong donut shaped magnets that fit perfectly inside the bottom on an oil pan and will collect and hold any metal fragments from being recirculated back through the engine.

@marcopolo9446

Жыл бұрын

This probably the most valuable information out of this whole video.

@Nusremmus

Жыл бұрын

Salvaged transformer can be valuable. I kept a magnet from a klystron tube, that sucker will rip a tool out of your hands

@gamingonly645

Жыл бұрын

@@marcopolo9446 only do it if u know what u are doing. Or it may endup badly

@nicklikesradio

Жыл бұрын

Oil filter has entered the chat...

@johnM-Jr

Жыл бұрын

Put the magnets on the outside of the pan. I doubt if stuck to tge inside bottom theyd come loose but not worth the risk

So, old micro parts, 6000 dollars worth of tools, 70 hours labor...and you can have a neat little...welding machine?

Finally a video for those of us who have been stockpiling copper billet. Thanks Grandpa for the advice you gave me as a young lad!!! Now all I need is a machining lathe and a broken microwave.

@skiddburns8664

Жыл бұрын

😆🤣😂

@blainebyrnes17

Жыл бұрын

You can do all the machining shown in the video with hand drill and a grinder. Use your brain Waldo .

@Bobo-ox7fj

Ай бұрын

@@blainebyrnes17Or a hand drill and a bit of sandpaper, or... just sandpaper. But dopes would rather complain than fail

@hooliator

Ай бұрын

You can easily get what you need. Just go to any college apartment block at the end of the year. They leave their old machine lathes in the parking lot when they move out.

@jed2055

Ай бұрын

. . . and a death wish. Good luck mate.

Goes without saying that it is extremely dangerous to handle a high voltage source like this. These guys know what they are doing, but they haven't explained any of the safety measures they put in place. Working with microwave oven electronics is no joke and should be taken very seriously.

@uuuummm9

Жыл бұрын

I guess in this case it goes vice versa, meaning they use the transformer to produce high current with a normal voltage level. So it is pretty safe unless you touch those electrodes.

@jasonpatterson8091

Жыл бұрын

As shown this is equivalent to an arc welder that is being intentionally shorted out. You could get burnt by the thin copper wire fairly easily, but there's essentially no risk of electrocution if it's constructed as shown (with a grounded cage around the transformer. The highest voltage is whatever is coming out of the plug, so it's no more dangerous than a toaster. If the transformer isn't modified, however, (when he cuts the thin wires off and replaces them with a few loops of very thick wire) then the thing is an electrocution waiting to happen - high voltage, no way for grounding the high voltage side to trip a breaker, exposed conductors = bad, bad news.

@TrillMurray

Жыл бұрын

@@ButterfatFarms it almost went without saying but then he said and at that point it had come and gone with saying

@DPortain

Жыл бұрын

I don't think these guys are aware that the magnetron contains a fair amount of beryllium oxide, which is brittle and toxic to breathe. They're not handling these microwaves safely.

@psr0459

Жыл бұрын

Oh, Ok ! With that advice I'll give it a Go !

Update from heaven… this killed me

@osamashokry4524

Жыл бұрын

This is dumb There are 8 million viewer no one will ever try to do this It's hard and useless and a waste of many These projects are for YT videos only and not worthy in real life so stop talking about safety

@Scroticus_Maximus

Жыл бұрын

I was going to say it looked like a Doctor Kevorkian special.

@DaltonSWilliams

Жыл бұрын

Death by boredom

@jessewilliams102

Жыл бұрын

There’s no way you can die from 3 V unless you just burned through your body for some reason. You can stick your tongue to the electrodes and it won’t do anything but when you put some kind of metal to it that heats up.

@chadsmith66

11 ай бұрын

lol

I feel like the amount of time it takes to make this machine, and the danger it puts people in during the construction, makes it more reasonable to go out and buy one brand new. Not to mention I have no clue what he did in the video because there was no narration or explanations to anything he did. But that is impressive that he can build that stuff and I would want him with me during a zombie apocalypse!

@theredscourge

Жыл бұрын

Either that, or far, far away during a zombie apocalypse...

@smith549371

Жыл бұрын

@@theredscourge yeah this guy would be one of the rare people to die from a self inflicted accident during a zombie apocalypse

@jtnoodle

Жыл бұрын

Yeah him and his shop full of tools. Can you carry all that in a bugout bag. No.

@ddwieland

Жыл бұрын

The video illustrates the construction techniques in an amazingly precise and efficient way. I'm truly impressed. But then I know how to use tools to make and repair things. This is probably baffling for a novice, but these are a long way from novice projects.

@SteveWhiteDallas

Жыл бұрын

Relatively few viewers will know what the few smaller parts are and the specs they must meet. Even fewer will watch this and be able to visualize the wiring diagram that is not provided. The only people who are likely to take this project all the way to the point of powering thing up are the ones who understand how it works and know what all the parts are. Omitting details was probably intentional.

My dad was always keeping the parts and pieces of whatever. Organized, too. I love this stuff!

@etankohcz1842

Ай бұрын

Bless him ‼ at least there a few of us,, reasonably intelligent humans, , , with the requisite, mechanical proclivity, talent/creativity, , environmental respect/ecomical frugality , , , of salvaging&recycling/repurposing fully functional components of nonfunctional, apparatus , , , given the economy of ready accessable protected storage facility, , , but to posess the requisite self control to realize the necessity, ,of considering cost of. storage vs. the cost of purchasing new, similar components, whenever needed ,, ,,, nonmanditory, , accumulation/collections can become extremely/prohibitively , expensive to store, ,after a time ,, , ,, , &relocating such accumulations/ collections can be financially& physically demanding!!! AND, , such accumulating collecting Can readily become addicting!!! one MUST confront the, , fact that collection is rarely cost-effective. I'm speaking from personal experience !!!

Great job except, running a power cord through a hole in a bare metal sheet is a no-no! Over time it will chafe through to the conductors and shorting mains power. Buy yourself a cheap gromet or a flexible sleeve and a "P" clip to secure the cord on the inside of the enclosure for strain relief!

@texgowing7359

Жыл бұрын

Henry, you do have a point there👍

@Michael-Archonaeus

Жыл бұрын

@@repentandbelieveinJesusChrist3 There's a time and a place. Wrong video.

@annettelupau9759

Жыл бұрын

@@Michael-Archonaeus AMEN

@abrahamevangelista4215

Жыл бұрын

@@Michael-Archonaeus In his defense, one might go meet meet the maker rather more quickly if one followed the examples of mains power routing in this video.

@Michael-Archonaeus

Жыл бұрын

@@abrahamevangelista4215 You're right LOL

If anyone tried this and is not experienced with electrical equipment, please be careful, microwaves have large capacitors that can discharge if handled improperly and injure or cause death.

@evanflagg8386

Жыл бұрын

You mean you're not supposed to open it with a sledgehammer?

@Lasky202

Жыл бұрын

@@evanflagg8386 I think a ax would be safer.🪓

@vortexan9804

Жыл бұрын

It's a small mf value, but hi voltage.

@merlin5476

Жыл бұрын

@@vortexan9804 hi in current.

@santaclause8758

Жыл бұрын

I never had a problem. I taken many apart.

I couldn't and wouldn't build such a device, that being said it was an entertaining watch and your craftmanship is top notch. thank you for posting.

Ver la facilidad con la que hace las cosas y lo increible que es haciendo ese trabajo con los materiales que uno derrocha me vuela la cabeza

Nailed it! *house up in flames in the background*

This is so dangerous a friend of mine died using one microwave transformer tying to do experiments like frying food with electricity or those "wood patterns" people makes. He must have been experimenting with crouching on the floor, got electrocuted, and fell on the thing he was doing. The family says when they found his body, he was irecogniscible and the thing almost causes a fire. I didn't know him well but he always was nice to me, he was an electrician so he always had components and tools lying around. I would have never expected him to go down that way.

@Android_Warrior

Жыл бұрын

We are only Human, one mistake it's all it takes and we are gone.

@homienat3374

Жыл бұрын

Not a great attudide to have , this is very dangerous

@Android_Warrior

Жыл бұрын

@@homienat3374 : Still it was a mistake from his friend and I have seen it countless times. it will continue to happen.

@TheBeingReal

Жыл бұрын

Just shocking.

@homienat3374

Жыл бұрын

Good on you knowing how to complete the project just think about the idiots out there that think they are qualified to do this , ie 12 year old teenagers???

Super Smart, Not many people have your skills! Plastic repair is great for obsolete parts! That is a great little spot welder!! Thanks for sharing!

@yosefmacgruber1920

Ай бұрын

Also for saving money. A lot of us do not want to buy expensive or new parts, for an aging-anyway car.

As a welding inspector, I can tell you that spot welding requires a specific amount of pressure to form proper spot welds. But still cool.

As a comment said, its enough stored electricity in the microwave to make anyone trying to remove it without guidance a deadly shock. Cool project, but it would be more useful as a point welder. For an experienced person this would be pretty safe, but as an tutorial for newbies its a death sentence

@frostyjim2633

Жыл бұрын

blah blah blah

@DrRodrigoGonzales

Жыл бұрын

I think point welder is too difficult...a relay might be to slow...and power mosfets are tricky!

@na9565

Жыл бұрын

@@frostyjim2633 Yeah, what's the worst that could happen? I die, well that wasn't that bad of a result

@lake8004

Жыл бұрын

@@na9565 lol, that depends on your Life A/ D

@rodpile8880

Жыл бұрын

Correct. The capacitor can hold 3-5000 volts causing instant death.

This single video contained more work than I have done in my entire life. I need a nap after watching.

@blucat4

Ай бұрын

😂😂

@mikehvirdis

27 күн бұрын

LOL 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

Awesome! You should look into "air assist" kits made for CO2 laser engravers. They're self contained air pump systems designed to discharge a positive flow of pressurized air out though a small hose with a jet nozzle at the end. You could route the hose along the electrical leads and mount the nozzle inside the handle aimed out at the work, so anytime the power is on and you're branding into wood, the constant jetblast of air instantly extinguishes any open flames that flare up, plus it burns a much nicer, more defined line into the wood because the stream of air cools down the materials work surface, and prevents the red hot wire from "singeing" the wood around the area where you're actually burning the lines.

This was so much more fascinating without reading the description first. I had no idea where it was going and was along for the ride.

06:10 you could have avoided: it is very bad for young people. Also there is no warning about the danger of the charged HV capacitor PS : Furthermore, if the magnetron is broken, beryllium is released which is very dangerous for the lungs 

@seetheworldfrommyharley

Жыл бұрын

I see Dead ignorant people 😒

@jvmiller1995

Жыл бұрын

Who the hell cares. Simple. If you do not know what you are doingleave it alone. Tired of youtube police in comments.

@theRhinsRanger

Жыл бұрын

what is the best way to discharge the HV capacitor safely, in your own words?

@paulkolodner2445

Жыл бұрын

@@theRhinsRanger The capacitor in microwave ovens is shorted by a 10-MOhm resistor, so it should discharge itself within a minute of turning the power off. However, you don't want to bet your life on that, do you? High-voltage resistors can fail. So you need to actively discharge the capacitor to be safe. Rules number one and two in working with high voltage: keep one hand in your pocket (to make sure you don't touch HV with one hand and ground with the other), and wear insulated shoes (so your feet don't complete the circuit either). So put on a pair of insulated shoes and ONE dry rubber glove (the heavy kind, not a surgical glove), grab a pair of needle-nose pliers with insulated handles, put your un-gloved hand in your pocket, and hold the two points of the pliers against the two terminals of the capacitor to connect them. Do it again. If you have a voltmeter, it wouldn't hurt to use the probes to measure the DC voltage on the capacitor, as long as you hold both probes with one hand. Warning: some high-voltage capacitors can actually charge back up to dangerous voltages by themselves, so it's wise to (a) discharge and measure a second time after a minute or two and (b) short the two terminals together with a wire after discharging to make sure it stays safe.

@xxportalxx.

Жыл бұрын

@@paulkolodner2445 I've literally disassembled dozens of microwaves (something like 40) for a project, never had a single one store residual charge by the time I was finished disassembling it. Aside from the built in discharge resistor caps always have some internal leakage, they will self discharge with time. Besides that I've never heard of hv caps 'self charging' in what situation did you have this occur?

You need a cable grommet (or similar plastic retention) for the mains cable entry to protect it from being cut through by the sharp metal case hole and potentially making the entire metal case live at 110/220v if the house earth is bad.

@unclenick222

Жыл бұрын

More than just the grommet. I would have applied some fiberglass tape to each of the inside edges of the transformer core window so they couldn't bite into the secondary winding's insulation.

@Dwarf19864

Жыл бұрын

The first one is even worse... you hold on a plastic, that is melting @5:51 and right below that there are metal parts that have like 10 000v? because the wires go trough the transformer... and because the wires go trough the transformer, if you get shocked the house ground/fuse won't know a thing... to it everything seems ok edit: It wouldn't have 10kv because the upper winding was removed and replaced with heavy wire, but still.. this is in no way safe

@williamofockham1222

Жыл бұрын

For UL approval, you need a proper clamping strain relief.

@MacGuffin1

Жыл бұрын

Cable Gland, to be precise ....

@bobbruin44

Жыл бұрын

it's a good thing you showed up

that was a really cool video , I love that he's so meticulous about his project ! and yes like alot of people saying down in the comments , you can buy a wire thingy or whatever for less than a 100$ but how cool is it to make something so nice and well made by hand as efficient as that tool and also from an old microwave mainly !!! he has tools and showing people at least how to be creative so show some respect people !

@Ukrainian__Patriot

Ай бұрын

Good point.

@eventhisidistaken

2 күн бұрын

..it didn't really explain anything, and is overly complex for what it is. The video is designed to to be needlessly long and sensational to maximize revenue..it's almost as bad as 'ancient aliens'.

Great youtube movie. Very educational. One thing I would like to see edited in future is please include the codes for electrical and electronically parts to be purchased. It wil make getting the parts so much easier. ( on screen as u fit them)Thanks

Holy hands and eyes Batman! No PPE and the housing isn't grounded AND I didn't see a fuse anywhere! "Pure luck" has kept this guy alive so far! Wowsers!

@YankeeinSC1

Ай бұрын

Imagine a brave new world without pages of saftey warnings, legal disclaimers and product liability lawyers... Free your mind and your body will move out of California...

@michaelwells7348

Ай бұрын

Must be a tough way to go out 😮😮😮😮😮

@rosskstar

Ай бұрын

then make one your safety mods, c'mon get to it

@sablatnic8030

Ай бұрын

That wasn't luck, dude knew what he was doing. And the main is fused and grounded, except maybe in USA.

@michaelwells7348

Ай бұрын

Im just glad that any 6th grader can see this ~ and discover the wonders of ( High Voltage )@@sablatnic8030

For some reason I like that enclosure made for that transformer on the first one, is pretty nice and simple yet robust enough and looks good. I like how you held the mesh on.

@almostanengineer

Жыл бұрын

Just ignore the two exposed bolts on the bottom of the ‘wand’ section.

Fun to do. Quite a lot of work to rescue just the transformer. Although if you build something yourself you can also repair it, which is worth a lot. Wicked skills man, keep it up.

This is great.. And sure.. One wouldn't want to stumble along with this.. And truthfully.. I think any younger kid/adult that tried this.. Would never make it to the end out of being forever impatient. And say ol boy does already have a spot welder.. But is tired of "friends" asking him to barrow it.. Now he has a loaner tool to hopefully pacify said friend... And look at the bright side.. If the machine did fail.. He doesn't have to worry about said friend asking to barrow anymore tools. Good build.. My favorite is how smooth and efficient you pull it off. People just don't understand the satisfaction from using a tool that you built yourself.. And be able to complete a job or some work using that tool with zero hangup...nothing is better as far as tools go..

It's sad how many people watch this and don't realize the improper and oftentimes unsafe use of shop equipment. Not to mention that you can purchase a better spot welder for what this build would cost.

@jamming8519

Жыл бұрын

Along the amount of time it took to build it!

@dylanwalker4164

Жыл бұрын

This video is obviously stylized and not really an instructional. I hope everyone gets that

@matts8023

Жыл бұрын

Not to mention the 2.5k benchtop lathe.

@LadySalemRaven

Жыл бұрын

These videos should be banned, censored, and taken down. Throw them in the bin with firearms video

@keithkrause9199

Жыл бұрын

@@LadySalemRaven So Dave, you don't know one end of a screwdriver from the other, do ya? Any DIY person finds these vids to be instructive and entertaining. Naysayers are usually people without these specific talents.

It's such a humbling feeling to watch someone work and not have the slightest idea on what they're doing. There's so much to learn still

@3nigma.3nc

Жыл бұрын

I prefer to use the word terrifying, especially when dealing with high voltage microwave transformers and capacitors but okay.

@khanartist1

Жыл бұрын

@@3nigma.3nc recognizing danger still requires recognition. Although reading everyone's comments about stored charges in the capacitor I am curious how this dude didn't die

Very innovative... If you can think it, you can build it ! Creativity like this can make you very wealthy if applied to practical uses and solves a genuine problem. Good Job !👍

All projects done very nicely,clean & Professionally made! VERY NICE!!👍

I especially like watching you run the big 1/0 cable and loop it through the transformer, even it up, and then cut two pieces off the wire instead of pulling it back through and giving you one long piece to reuse for something else later.

@jasonbouvette1077

Жыл бұрын

I was bothered by the same thing.

@raymondtyler88

Жыл бұрын

Coiled wires build current

@DL101ca

Жыл бұрын

@@raymondtyler88 that one flew right over your head bud. He's complaining about the guy not feeding the cable through so he wouldn't waste it by cutting leftovers on both sides, but have one long piece instead. That cable isn't cheap.

There really should be safety warnings in this video. Taking apart a microwave can be very dangerous especially if you aren't aware of the hazards such as the capacitor and the magnetron. Safety in hobbies should not be dismissed.

@netmaster88

Жыл бұрын

Yeah. I was a total idiot and never knew what those safety Allen keys screws were for. I wish they said on the key you buy at the store if you use this to take apart electrical devices chances are they used those screws to keep people out! I was an idiot and just opened up a microwave and proceeded to take it apart and throw away all the inside components. Later I read about the cancer dust and was like well I don't think it was close to my face at any point....not that close anyways. But I had a legit nervous brakedown for like 6 months paranoid I was going to get skin burns or skin cancer etc because my dumba$$ didn't read any of the warning labels. At least I didn't cut anything apart like this guy.

@ronb6182

Жыл бұрын

Discharging the capacitors is number one safety mask is another precaution needs to be taken seriously. I think I would just make a low voltage high current transformer you can make a fast charge battery charger.if you use the transformer as it is you could power a Tesla coil but you better know what you are doing. My friend made one with a neon transformer but the glass capacitor broke he made the plates too large and the cap arced around the other side and cracked the glass. Making larger insulator's is not going to affect the capacity but is much safer. Well lesson learned and I have no clue if he ever fixed the project. High voltage is nothing to play with. 73

@StevenSmith6942_

Жыл бұрын

@@netmaster88 hell ya...

@jaredpierce8477

Жыл бұрын

Yea, there is "Don't try this at home!", but that really doesn't convey the risk of something like like fucking with a microwave power supply if you don't already know exactly what you are doing.

@deadprivacy

Жыл бұрын

yeah, some of this stuff is beyond dumb, the plastic welder? what? just fucking what? boxes it all in and then leaves towo huge copper contacts sticnking out the front? the guy isnt well.

In life we tend to think of genius as someone who is a scholar or mathematician. While that may be true, genius is also apparent in so many other aspects of life. This video to me is genius as I would have no idea as how to go about putting all the facets of the build into a working conclusion. Thanks for sharing, Amazing.

Neat build. I'd recommend that you ground the metal enclosure around the transformer though.

Fantastic! Next time I have a microwave go out on me, instead of discarding it, I'll buy 40k worth of equipment to make a flashy KZread video!

I kept my old microwave but threw out my Milling machine dammit

Undeniably my favorite MOT re-purpose video! 🤩👍

I love your building techniques. Fast and efficient with minimal tools. That's how I roll too. I learned from you how to make a case with sheet metal, bending, and drilling.

Title: This is why we don't toss out broken microwaves Guy: Immediately tosses out almost entire microwave

@marks6663

Жыл бұрын

the only valuable part of the microwave is the magnetron. That is the part he removed. Once it is removed, the rest is no longer a microwave.

@TheAechBomb

Жыл бұрын

@@marks6663 actually he's only using the transformer, , not the magnetron

@bajatoma

Ай бұрын

@@marks6663 tsk tsk tsk....

I had no idea it could be used for that. You do amazing work so detailed. I can tell your very passionate about your work

@zachleroux5783

Жыл бұрын

Could and should are very different things. It's a very inefficient and dangerous way to do this.

thanks for the tutorial. took me 3 days but i love my new welding tool

nice. now you have a spot welder and a hot stapler but still no lunch. i will probably make both of these at some point

That's some serious dedication to video editing. 3 camera angles for the glue.👏👏👏

Just a little tip, when you're drilling something on a lathe start the hole with a center drill, it doesn't matter if your tailstock is a little out of alignment, it will always drill a perfectly centered hole in your stock, then you follow up with the drill bit. Great project though, MOTs can do so many things it's incredible. There should have been a PSA about avoiding the microwave capacitor though, those can cause lethal shock even when the microwave is off and unplugged. I've never seen plastic body panel repair like this though, it's a great idea, the wire keeps the cracks held together, pretty nifty. Though to be honest I always cringe a little when I see a MOT secondary get chopped out, I'm a High Voltage hobbyist and I don't really do low voltage high current stuff lol. I just built a 1.7KJ capacitor bank with a MOT charge circuit, should be pretty fun😁.

@Victormirandavale

Жыл бұрын

You're a falling star, man... that's why we don't see as many as before when we look at the sky😃 I made one myself and it's working fine. But I didn't include that relay on my assembly. Could you send me the specs of that item, plase? Mostly appreciated. Regards.

@douglashartman729

Жыл бұрын

You posted two great things my friend. Advice on the CAP is spot on and I forgot about center punching when end drilling myself and will be doing that later on! So thank you for posting. :)

@amiga2025

Жыл бұрын

i nodded off...

@S.P.B.222

Жыл бұрын

@@amiga2025 you must've been watching from a NASA employee break room, ehh? You're a funny person 😂

@xxportalxx.

Жыл бұрын

The caps have a discharge resistor built in, so long as you aren't taking it apart right after it was plugged in it's not a worry. I suppose you'd have to be cautious if you're in the habit of testing electronics before scrapping them, personally I get mine straight from a junk heap so there's never residual charge to worry about.

For the first build. a clear Guard could be made with a mechanism so that when pressure is applied, it would retract and allow for the welding.

just beautiful, thanks for your work

This video is exactly the reason why I toss out broken microwaves

@dang48

Жыл бұрын

With the prices these days, I would rip out the copper and sell that.

@NorthCarolinaConservative

Жыл бұрын

🤣🤣🤣

This is an incredibly dangerous build. Safety is taking a back seat to aesthetics here and should NOT be copied.

@andydingley3746

Жыл бұрын

It's "slightly dangerous". But it's high current, not high voltage. So not the "incredibly dangerous" that's the usual level of the microwave rebuild projects and The Craft Project That Shall Not Be Named.

@jens468

Жыл бұрын

@@andydingley3746 It's not the voltage that kills, it's the current. 20-25mA AC is considered dangerous, 40mA already harm the heart. 130 mA DC is considered deadly.

@fos903

Жыл бұрын

@@andydingley3746 Current kills, not voltage

@erikpoephoofd

Жыл бұрын

@@fos903 Yes but if the voltage is too low, it will not induce a large current in your body. V/R=I Since your skin has a high resistance you need a decent voltage to get a high current. Thats why a 12V car battery won't even shock you even though it can deliver a lot of amps.

@jamesnash6101

Жыл бұрын

Do you think, the video should be removed from KZread? I'm not in favor of removing any video from KZread. However, from the comments that I am reading this is not a good video because it can be extremely dangerous.

Amazing work flow. That transformer can do some crazy stuff., which was where I thought this video was going. Enjoyed it.

Totally amazing… not something I have interest in usually, but watched every second. Really cool engineering.

You had me captured through the whole video. It's just to clever around every turn. Thank you for sharing I loved it ❤

This guy’s skill is unbelievable good. 👍

That's totally awesome. I'm going to start collecting all the microwave ovens i find thrown out around my neighborhoods. Thanks for your videos love. Them 😉👍👍👍

@tyrzxv

Жыл бұрын

Beware of the ceramic stem to the magnetron. It contains Beryllium and if broken and you inhale the dust, you can get a disease called Berylliosis which is incurable and seriously affects your lungs. So if the microwave is smashed, let it go to the trash, it's not worth your lungs.

I know the capacitor should have a bleed resistor on it, but I always short it out just in case.

@joshauatolly4065

Жыл бұрын

Why is this the only comment I've found about this?

@joejoemyo

Жыл бұрын

@@joshauatolly4065 Because everyone who didn't think of it themselves got electrocuted

@bobfinning8587

Жыл бұрын

Very often that bleed resistor is open circuit so to discharge the capacitor is absolutely vital.

@andrew6464

Жыл бұрын

Honestly the amount of times I could have died cause I took apart microwaves when I was little and didn’t know you need to discharge the capacitor Honestly not just microwaves I did other dumb stuff as a kid like putting wires in the plug and thinking how funny it was that sparks flew all over the carpet and my bed then proceeding to do it 10 to 15 more times it’s a miracle nothing ever got burnt down it’s also a miracle I didn’t get electrocuted cause the wire had no casing

@kippertrace5808

Жыл бұрын

Has everyone in these comment section got thousands of pounds/dollars spare to buy all the tools you'd need to complete these projects? Nevermind almost committing suicide in the process. This should be banned.

1:34 I'd want some sort of insulator between those two conductors. If those fittings rotate, for whatever reason, you will release the magic smoke and fire instantly and catastrophically.

@willbee7925

Жыл бұрын

Not needed

@a1travel692

Жыл бұрын

Its not needed!

@breezetix

Жыл бұрын

You do realize its not powered while hes doing that right? Its not as bad as you think. Hes already shorting it using that metal strip.

@jaredpierce8477

Жыл бұрын

First of all, the fittings touching doesn't bypass the switch. Second, it is just switched mains going into a transformer, no magic smoke is used. Third, shorting the thick connectors may actually reduce the device's ability to draw power across the transformer. Without the higher impedance load, the induced current dumps less power and thus requires less work from mains power.

Wish I had your skills and knowledge, very inspiring and impressive.

So creative and talented! Thank you for sharing

I used to work for the old Sears Service, when I started in the shop one service tech was on leave due to be electrocuted by touching the wires of the microwaves he repaired, was an old man. when he came back one day we went to morning break and he returned alone to work, we came back from brake and he was blue laying on the floor and passed away of electrocution.

@peterbellwood5412

Жыл бұрын

Reap / sow .

@ATCrogerwilco

Жыл бұрын

My uncle died literally the exact same way. Was a sears repairman and was killed repairing a broken microwave in the 80's.

@Android_Warrior

Жыл бұрын

@@ATCrogerwilco : Where did he lived?

@smittymcjob2582

2 ай бұрын

Sears: the only place it makes sense to opt for going to a brake instead of a break!

The "Broken Microwave" parts are only 5% of this build. Be nice to have a tool & die shop fall on me too! Another great video with a title that just may be stretched beyond reality. How about "Microwave Spot Welder for under $200 (pluss a Tool & Die Shop) ? ? ?

@Tommyfrommyspace

Жыл бұрын

a tap and die set cost next to nothing.

@skelafeti

Жыл бұрын

@@Tommyfrommyspace Got a line on a lathe that costs nothing?

Man I'm just jealous of the workshop, I would build so much random stuff like this. But the bumper, I would've just used some tape, baking soda and super glue lol

@jukee67

Жыл бұрын

The shop is a major piece of the production. Big views, no politics, no misinfo, etc. This is Hollywood Production in the age of KZread without having to pay the big name actors. It takes years for the everyday man or woman to amass such a shop and property to secure it in.

Love the cabinet - perfect for radio project box.

I like the spot welder. That would be very handy for someone doing lite gauge projects.

@eddiebarrera147

Жыл бұрын

Yes like the theory behind this useful gadgets,but on ebay you can buy them very cheap from china.you spent more in materials building something you can get for 40 to 100 bucks.Depending the gadget

@pauleohl

Жыл бұрын

It would be good for steel and stainless, but not aluminum or copper. You need capacitor discharge to spot weld aluminum or copper or brass.

@WesleyJolly

Жыл бұрын

@@pauleohl very true,, but I suspect that trying to build a capacitive discharge spot welder is beyond what most garage mechanics should be working on.

@Stonerwolf

Жыл бұрын

@@WesleyJolly i done set my garage.on fire

@foggy561

Жыл бұрын

would work well for building battery packs

I find it quite funny that this guy does have access to lots of really expensive devices, but apparently not to a simple heatgun for shrinking heat shrinks ...

@esqueue

Жыл бұрын

He used one at 12:33

@skyweaver3199

Жыл бұрын

I thought the same thing In the first part of the video.

@psr0459

Жыл бұрын

Free Energy , Rodney, FREE. Imagine how much you could sell that for ?😉

After about Twenty Months our Expensive Microwave/Convection Oven Quit, on the Microwave side. I unplugged the oven took the cover off. Found a Blown Fuse, matched it up at Radio Shack. About 18 months later that fuse blew. Couldn’t find the spare fuses. As I was looking at the Wiring Diagram I noticed it called for a higher amp fuse? Checked the circuit, found that was correct. Replaced fuse, it hasn’t blown in many years. The Oven Quit again. Found a bad door micro switch, swapped it with the cover micro switch, and jumped out, that switch. Ordered new micro switches and changed out both door interlock switches. Placed Cover Switch back in place. Still working today.

Wow, these seemed SO useful!!! Seriously though, who is going to make these at any point in their lives? Even the spot welder seemed useless.

Cool project in the end, but you should have grounded the metal cover by connecting it to earth. In the event a wire comes loose in your setup, it could touch that casing and make it live. Always ground your enclosure by tying it to mains earth.

@diogenesesenna9323

Жыл бұрын

Exactly what I came down here to say - that monstrosity is terrifying without an earth connection.

@thomasknockout

Жыл бұрын

My personal favourite was no PPE whilst using the drill press (and probably everything else). Remember kids, when using powerful plant equipment to remove material, sharp pieces may fly off and pierce your eyeballs

@snapperhead273

Жыл бұрын

exactly. also there is no grommet protecting the cable where it passes through the metal case so there is a good chance that the metal case will cut through the insulation making the whole case live.

@virtual812

Жыл бұрын

This is the reply i was looking for... He was so close to doing it safely. I can overlook a fuse being missing, but no earth is unforgivable.

@virtual812

Жыл бұрын

@@snapperhead273 Just saw the no grommet part... This was enough to make me snap and downvote. 2 of 2 builds both with deadly faults lurking, both easily avoidable.

I am very impressed with your two projects. In my case I repair a lot of the busted down microwaves that i run across. But your video really tells us what we can do with the write offs.

@reinbert

Жыл бұрын

So you're a random microwave repairer wondering what to do with the spare parts?

@nyrbsamoht

Жыл бұрын

@@reinbert so am I. thats how I introduce myself at parties.

@Frombie_01

Жыл бұрын

@@nyrbsamoht Almost wet myself laughing.

@Lasky202

Жыл бұрын

@@reinbert 🤣🤣😅🤣😅😂

@Lasky202

Жыл бұрын

@@nyrbsamoht 🤣😅😂😅🤣😅😂

I don't think these are meant to be DIY for the masses, but just an engineer providing entertainment of what they can do with their expertise dealing with recycled electrical components. You'll probably wanna get an electrical engineering degree or some type of certification in dealing with electric components before embarking on such an enterprise. I love these types of videos and I wish I had such skills!

Mom comes home and says, “Hey you brats, where’s the microwave?”

I love this kind of "condensed time" video edit. All details of the process shown, and still saving viewer's time. Music is great too and perfectly fits with the flow of the video. Thumbs up, bro!

@Inferryu

Жыл бұрын

I think is more of a cool factor or "things you could do, but seriously, do proper research first beforehand" thing, they glossed over at least two major risk concerns so I wouldn't recommend anyone to follow this as a tutorial.

@eugenetswong

Жыл бұрын

@@Inferryu is it safe to just put that bent wire in a regular soldering iron to achieve the same goal?

@19daver85

Жыл бұрын

@@eugenetswong you don't need to put it into the soldering iron. Just hold the soldering iron to the metal until it melts into the plastic. I did a similar job on my car and didn't want to spend money on a specific tool, i won't need again (hopefully)

@arlenmargolin4868

Жыл бұрын

I made the same comment I thought that music just made the video that much better

@eugenetswong

Жыл бұрын

@@19daver85 So, even a twist tie is good enough for scrap metal? Also, I've never understood why the rest of the metal in the soldering iron doesn't become so hot that it melts.

Very nice. Just one advise. On the second build it's very important to connect the mains ground wire (yellow/green) to the metal case.

@abcdefgh1279

Жыл бұрын

It is also very dangerous not to use any strain relief for the mains cord touching the metal case!

@lawfullysuspicious1225

Жыл бұрын

why wait to the second build i didn't see it but someone mentioned they put the cable through just a metal hole without a gromit and it had the potential to short out I did mention an earth ground wire on this one somewhere in the comments they mentioned the metal was sharp so this might be the only one built id do it to this one probably but I am kinda lazy, oh she'll be right mate 🤣🤣🤣🤣🤔🙄🤔🤔🤔🤣🤣🤣🙃🙃🙃

@lawfullysuspicious1225

Жыл бұрын

@@abcdefgh1279 strain relief wow I've never heard these terms used for electronics I like it, you can touch the mains but its a bit shocking I've managed to do it 3 times its a shocking experience but it let's you know your alive 🤯

@SitNSpinRecords

Жыл бұрын

@@lawfullysuspicious1225 the ole 60 hz shuffle is a unique dance because its the only dance that has cuss words in it.

@whiteemoji931

Жыл бұрын

And all the nerds go wild!

watching him making things with such ease and using Materials that are thrown away just blows the mind...

@jasonpounders8456

13 күн бұрын

That's the valuable part of the magic, known as talent and skill you got to make it look easy! That is the art, component.

beautiful workmanship

i've built things like this over the years. i use composite board scraps, like found on outside decks, instead of wood. composites are tough, non-absorbent & machine well. neat tools. recently built a sheet metal welder from a mw transformer.

So we took an old magnetron, and with thousands of dollars of tools, made it, a tool. Nice work.

@acement1

Ай бұрын

No magnetron was harmed in the making of this video.

@brousschambers38

Ай бұрын

Transformer

Remember the time we build a spot welder out of an old microwave? It made accidental contact, shorted out, and exploded in a hellish shower of liquid metal? Man what an amazing Shop fire that was!

@ddwieland

Жыл бұрын

Notice the safety shielding in these projects. That puts them a big step above most.

@Bobo-ox7fj

Ай бұрын

So put a slightly under-rated self-resetting circuit breaker and an RCD in. Duty cycle down, safety way up. There's no need to cry.

@sleepybadtzmaru

Ай бұрын

This comment was a year old...@@Bobo-ox7fj

@etankohcz1842

Ай бұрын

A bit excessively, , , SENSATIONALIZED!!!

This is a much better project than the old cutting board every mom got from their kid in junior high wood shop. 😆

Good to see someone who can use many different types of craft to put something handy together 👍 not many of us about

Videos like this are exactly why we need like:dislike ratios! I have the extension installed to see them. I do not normally look at the comments and I thought this project looked interesting (I am no electrician and do not have a mechanical mind), but I saw the ratio was a bit low and checked the comments. It turned me off from even attempting something like this. Cool project, appreciate the video, but I am glad I saw the ratio.

@jerrylvega2878

Жыл бұрын

@@kuturak I agree. I skipped through the video, it took me less than 2 minutes it was a waste of my time. But hey, it has over 9 mil. views. It looked interesting so it hooked me into clicking it.

@brettharter143

Жыл бұрын

But how else will they hide public opinion on the interweb to the machiavelian things going? Who cares if the general public gets electrocuted lol

@DIGIPIX55

Жыл бұрын

I look at it like watching Jimi Hendrix playing. I can enjoy it while knowing I can't do it. This guy obviously has massive experience.

@Dutch3DMaster

Жыл бұрын

@@DIGIPIX55 He doesn't... He'd know not to heat heatshrink with a flame like he did near a component like a relay, and also use earthing in metal cases, use grommets for live wires entering a piece of sheet metal, and use the proper tools for crimping on the termination lug points for heavy duty cabling...

@Marta1Buck

Жыл бұрын

It has 2:1 like to dislike ratio

Best microwave transformer video I have watched yet! Keep it up.

Wow ! Great idea . Can you do one on how to make your own solar panels . That would be vary helpful .

The most amazing parts of the video are when he remembered to put the heat shrink tubing over the cables before attaching the connectors and/or soldering. I can't even count how many times...

@udance4ever

Жыл бұрын

what happens otherwise?

@baysickleebuck

Жыл бұрын

@@udance4ever You have to remove/de-solder the connections. It's an annoying inconvenience that happens all the time. It's a long running joke for anyone that's ever done it (pretty much everyone).

@dandevries7124

Жыл бұрын

I know! That is so frustrating to realize that after you admire the perfect solder joint and then realize "oh shit!"

@SallyStClair-tv9gf

Жыл бұрын

@@baysickleebuck such a polite answer. My dirty mind couldn't get out of the gutter-

@AlbionSupreme

Жыл бұрын

That is why they make elechickens tape

Pretty cool. But some explanations would be nice. Not everyone know what you’re doing. Also, a disclaimer and a brief mention of safety when those moments are important are needed. 👍

@cyclemoto8744

Жыл бұрын

Yes. I appreciate that everyone does not speak english however I do find content with no voice over, or at least subtitles , very frustrating. In any case, thanks for the content

@rogerkearns8094

Жыл бұрын

Yes, it's just showing off, basically.

You can even brand your own cattle. Just think of the possibilities!

Dude that dropped microwave slo-mo opening was a real surprise. Absolutely brilliant and boy did it get my attention!

Bookmarking this for next time I need to fuse nails together!

With respect..I wish young kids could see and understand this project..it incorporates electrics, metalwork, spot welding process and recycling all in 14 minutes !!! Totally Handy we need people like you to train our youngsters..Top marks Great presentation....

@DanielFrost79

Жыл бұрын

Until some kid ends up dying because he compeletely ignores all normal reasoning and thinks hes untouchable.

@ARVash

Жыл бұрын

Microwaves are the number one killer of electronics hobbyists so maybe not "this" project.

@georgestyer2153

Жыл бұрын

@@ARVash Its all down to training not only in skills but safety

@buddyhutchins3782

Жыл бұрын

Neat woodwork too.

@ARVash

Жыл бұрын

@@georgestyer2153my point is that microwave transformers can be dangerous in unpredictable ways even when you're practicing good safety. I could enumerate the ways but let's just say it's not the number one killer of electronics hobbyists because they were being reckless. There's a lot of things that can go wrong that are impossible to go wrong in other still dangerous electronics projects. I get that this is high current and low voltage which is somewhat safer but high current comes at the risk of lines being unable to turn off. Insulation can melt and suddenly you're dealing with 120v. Breakers don't always trip when they're supposed to. There are projects that most people should not be doing in a garage because they have a normal garage and even good safety is not enough, you need impeccable obnoxious levels of safety. Could someone do this safely? absolutely. However I would never trust a kid or teen even under tight supervision with a microwave transformer. Even people with field experience who know how to work safely have gotten bit by this one because it is unintuitive all the ways that things can go wrong. If you don't have experience with high current / high voltage in a job setting I would pass on this one. Speaking from experience, I took down my videos on microwave transformers. I realized after that I was fine only due to an abundance of caution and even then you're leaning on the due diligence of the electricians who built your house and your own willingness to test everything. High current means that a breaker trip can be a house fire has already started. If you're in a shop with trained professionals maybe you'll be okay, but people try this in their garage and sometimes they're not.

GREAT DEVICES and the best craftsmanship on any homemade project I've seen!!!!!

@mariemccann5895

4 ай бұрын

Then you must have a white stick.

This is very informative and thank you for sharing experiment.

*Me as I started watching:* "Oh good, I have a broken microwave I've been wanting to do something with" *Me after watching:* "Do you want another one for one of your videos?"

I really liked the second jig you made. That’s something I could use for a lot of small projects. Thanks for sharing

@mcouture8169

Жыл бұрын

Buy a spot welder for $40 - $100 and live to build your projects 👍

@titianonugruta9796

Жыл бұрын

Super

I had no idea you could do that with a magnetron. Nice job.

Amazing work. I love how smooth and clean everything looks the whole way through. Amazing design